arXiv subjects

Paolo Carbone

Publications and source records attributed to Paolo Carbone.

11 recordsLinked to original sources

arXiv2018

Measuring the Noise Cumulative Distribution Function Using Quantized Data

This paper considers the problem of estimating the cumulative distribution function and probability density function of a random variable using data quantized by uniform and non-uniform quantizers. A simple estimator is proposed based on the empirical distribution function that also takes the values of the quantizer transition levels into account. The properties of this estimator are discussed and analyzed at first by simulations. Then by removing all assumptions that are difficult to apply, a new procedure is described that does not require neither the transition levels nor the input sequence used to source the quantizer to be known. The experimental results obtained using a commercial 12-b data acquisition system show the applicability of this estimator to real-world type of problems.

eess.SP↗

arXiv2018

Accurate Sine-Wave Amplitude Measurements Using Nonlinearly Quantized Data

The estimation of the amplitude of a sine wave from the sequence of its quantized samples is a typical problem in instrumentation and measurement. A standard approach for its solution makes use of a least squares estimator (LSE) that, however, does not perform optimally in the presence of quantization errors. In fact, if the quantization error cannot be modeled as an additive noise source, as it often happens in practice, the LSE returns biased estimates. In this paper, we consider the estimation of the amplitude of a noisy sine wave after quantization. The proposed technique is based on a uniform distribution of signal phases and it does not require that the quantizer has equally spaced transition levels. The experimental results show that this technique removes the estimation bias associated with the usage of the LSE and that it is sufficiently robust with respect to small uncertainties in the known values of transition levels.

eess.SP↗

arXiv2018

Information and Statistical Efficiency When Quantizing Noisy DC Values

This paper considers estimation of a quantized constant in noise when using uniform and nonuniform quantizers. Estimators based on simple arithmetic averages, on sample statistical moments and on the maximum-likelihood procedure are considered. It provides expressions for the statistical efficiency of the arithmetic mean by comparing its variance to the proper Cramér-Rao lower bound. It is conjectured that the arithmetic mean is optimal among all estimators with an exactly known bias. Conditions under which its statistical performance are improved by the other estimation procedures when the exact bias is not known are found and analyzed. Using simulations and analysis of experimental data, it is shown that both moment-based and maximum-likelihood-based estimators provide better results, when the noise standard deviation is comparable with the quantization step and the noise model of quantization can not be applied.

eess.SP↗

arXiv2018

Parametric System Identification Using Quantized Data

The estimation of signal parameters using quantized data is a recurrent problem in electrical engineering. As an example, this includes the estimation of a noisy constant value and of the parameters of a sinewave, that is, its amplitude, initial record phase, and offset. Conventional algorithms, such as the arithmetic mean, in the case of the estimation of a constant, are known not to be optimal in the presence of quantization errors. They provide biased estimates if particular conditions regarding the quantization process are not met, as it usually happens in practice. In this paper, a quantile-based estimator is presented, which is based on the Gauss-Markov theorem. The general theory is first described and the estimator is then applied to both direct current and alternate current input signals with unknown characteristics. Using simulations and experimental results, it is shown that the new estimator outperforms conventional estimators in both problems, by removing the estimation bias.

eess.SP↗

arXiv2018

Dynamic Signal Measurements Based on Quantized Data

The estimation of the parameters of a dynamic signal, such as a sine wave, based on quantized data is customarily performed using the least-square estimator (LSE), such as the sine fit. However, the characteristics of the experiments and the measurement setup hardly satisfy the requirements ensuring the LSE to be optimal in the minimum mean-square-error sense. This occurs if the input signal is characterized by a large signal-to-noise ratio resulting in the deterministic component of the quantization error dominating the random error component and when the ADC transition levels are not uniformly distributed over the quantizer input range. In this paper, it is first shown that the LSE applied to quantized data does not perform as expected when the quantizer is not uniform. Then, an estimator is introduced that overcomes these limitations. It uses the values of the transition levels so that a prior quantizer calibration phase is necessary. The estimator properties are analyzed and both numerical and experimental results are described to illustrate its performance. It is shown that the described estimator outperforms the LSE and it also provides an estimate of the probability distribution function of the noise before quantization.

eess.SP↗

arXiv2018

A Rigorous Analysis of Least Squares Sine Fitting Using Quantized Data: the Random Phase Case

This paper considers least-square based estimation of the amplitude and square amplitude of a quantized sine wave, done by considering random initial record phase. Using amplitude- and frequency-domain modeling techniques, it is shown that the estimator is inconsistent, biased and has a variance that may be underestimated if the simple model of quantization is applied. The effects of both sine wave offset values and additive Gaussian noise are taken into account. General estimator properties are derived, without making simplifying assumptions on the role of the quantization process, to allow assessment of measurement uncertainty, when this least-square procedure is used.

eess.SP↗

arXiv2018

Practical Issues in the Synthesis of Ternary Sequences

Several issues related to the practical synthesis of ternary sequences with specified spectra are addressed in this paper. Specifically, sequences with harmonic multiples of two and three suppressed are studied, given their relevance when testing and characterizing nonlinear systems. In particular, the effect of non-uniform Digital to Analog Converter (DAC) levels on the spectral properties of the generated signal is analyzed. It is analytically shown that the DAC non-uniform levels result in degraded harmonic suppression performance. Moreover, a new approach is proposed for designing ternary sequences, which is flexible and can be adapted to suit different requirements. The resulting sequences, denoted as randomized constrained sequences, are characterized theoretically by deriving an analytical expression of the power spectral density. Furthermore, they are extensively compared with three synthesis approaches proposed in the literature. The approach is validated by numerical simulations and experimental results, showing the potential to achieve harmonic suppression performance of approximately 100 dB.

eess.SP↗

arXiv2018

Modelling dark current and hot pixels in imaging sensors

A Gaussian mixture model with a complex covariance structure was used to analyse experimental data from images recorded by a digital sensor under darkness, to model the effects of temperature and duration of exposure on artificial signals (dark current), on ordinary and possibly defective (hot) pixels. The model accounts for two components of variance within each latent type: random noise in each image and lack of uniformity within the sensor; both components are allowed to depend on experimental conditions. The results seem to indicate that the way dark current grows with the duration of exposure and temperature cannot be represented by a simple parametric model. The latent class model detects the presence of at least two types of hot pixels, where the less frequent ones have also a more extreme behaviour. Though the lack of uniformity of the sensor is amplified by duration of exposure and temperature, pixels characteristics seem to deviate in the same direction and with the same relative size.

stat.AP↗

arXiv2017

Accurate Estimation of a Coil Magnetic Dipole Moment

In this paper, a technique for accurate estimation of the moment of magnetic dipole is proposed. The achievable accuracy is investigated, as a function of measurement noise affecting estimation of magnetic field cartesian components. The proposed technique is validated both via simulations and experimentally.

eess.SP↗

arXiv2017

An Interactive System for Exhibitions in a Science and Technology Center

This paper presents the development of a system for realizing interactive exhibitions in the context of a science and technology center. The core functionality of the system is provided by a positioning subsystem comprised of a fixed infrastructure of transmitters and a sensor worn by a user. The operating principle of the positioning system is based on inductive coupling of resonators. Information about the position of the user is transferred to an information system for processing and displaying. Possible use cases include interactive games, information retrieval interfaces and educational scenarios.

eess.SP↗

arXiv2017

Analysis of simultaneous 3D positioning and attitude estimation of a planar coil using inductive coupling

In this paper, simultaneous estimation of 3D position and attitude of a single coil using a set of anchors, with known position and magnetic dipole, is analyzed. Effect of noise and geometric properties of the anchors' constellation is considered. Several parameters are analyzed and discussed, including placement of anchors in a single or in multiple orthogonal planes. It is shown that adding space and orientation diversity anchors may lead to a more robust performance when the mobile node attitude changes in time.

eess.SP↗