arXiv subjects

Paolo Conconi

Publications and source records attributed to Paolo Conconi.

6 recordsLinked to original sources

arXiv2026

Searching for Gravitational Wave Events Counterparts in X-Rays by Tilting the Multiple Shells of Wolter-I Optics

Current X-ray telescopes have a combination of field of view and angular resolution that makes it difficult to quickly localize the electromagnetic counterparts of gravitational wave events --- which will become increasingly important when the LIGO and Virgo experiment will work at full sensitivity or when the Einstein Telescope and the Cosmic Explorer observatories will come online in the next decades. We investigate what X-ray optical designs could provide --- in a small mission --- a field of view wide enough to observe quickly the region of the sky constrained by gravitational wave detectors, and at the same time an angular resolution sufficiently good to localize these sources. We study, using ray tracing simulations, how we can optimize a Wolter-I telescope for this purpose. We find that, by appropriately tilting the shells of a Wolter-I X-ray telescope in different directions, the field of view increases, at the cost of a reduction of the on-axis performance. We draw a possible design made of two identical modules pointing at adjacent regions of the sky.

astro-ph.IM↗

arXiv2025

Study of Lobster and Kirkpatrick-Baez Designs for a Small Mission dedicated to Gravitational Wave Transient Localization

The localization of X-ray counterparts to gravitational wave events requires a telescope with accurate localization capability in a field of view comparable to the region constrained by the gravitational wave detectors. In the context of a small, dedicated, mission, we investigate which optical design could satisfy this capability. We compare the possible optical designs that have been proposed for X-rays: the Lobster Eye design (both in the Angel and Schmidt variant) - inspired by the eyes of crustaceans - consisting of many small capillaries where grazing incidence reflection occurs, the Kirkpatrick-Baez design, where double reflection occurs on two orthogonal parabolic mirrors, and the standard Wolter-I design. We find that the first two designs, compared to the latter, can achieve a significantly larger field of view, and have a good localization capability if the focal length is longer than existing Lobster Eye designs. The Kirkpatrick-Baez design presents the best angular resolution, but the best overall field of view is obtained with a Lobster system: we present a small optical module able to achieve an effective area $>$100 cm$^2$ at 1 keV in a field of view of 10 deg$^2$.

astro-ph.IM↗

arXiv2020

Nightside condensation of iron in an ultra-hot giant exoplanet

Ultra-hot giant exoplanets receive thousands of times Earth's insolation. Their high-temperature atmospheres (>2,000 K) are ideal laboratories for studying extreme planetary climates and chemistry. Daysides are predicted to be cloud-free, dominated by atomic species and substantially hotter than nightsides. Atoms are expected to recombine into molecules over the nightside, resulting in different day-night chemistry. While metallic elements and a large temperature contrast have been observed, no chemical gradient has been measured across the surface of such an exoplanet. Different atmospheric chemistry between the day-to-night ("evening") and night-to-day ("morning") terminators could, however, be revealed as an asymmetric absorption signature during transit. Here, we report the detection of an asymmetric atmospheric signature in the ultra-hot exoplanet WASP-76b. We spectrally and temporally resolve this signature thanks to the combination of high-dispersion spectroscopy with a large photon-collecting area. The absorption signal, attributed to neutral iron, is blueshifted by -11+/-0.7 km s-1 on the trailing limb, which can be explained by a combination of planetary rotation and wind blowing from the hot dayside. In contrast, no signal arises from the nightside close to the morning terminator, showing that atomic iron is not absorbing starlight there. Iron must thus condense during its journey across the nightside.

astro-ph.EP↗

arXiv2001

REM - Rapid Eye Mount. A fast slewing robotized infrared telescope

The main goal of the REM project is the observation of prompt afterglow of Gamma-Ray Burst (GRB) events. Such observations at Near InfraRed (NIR) wavelengths are even very promising, since they allow to monitor high-z Ly-$α$ absorbed bursts as well as events occurring in dusty star-forming regions. In addition to GRB science, a large amount of time ($\sim 40%$) will be available for different scientific targets: among these the study of variability of stellar objects open exciting new perspectives.

astro-ph↗

arXiv2001

Optimization of grazing incidence mirrors and its application to surveying X-ray telescopes

Grazing incidence mirrors for X-ray astronomy are usually designed in the parabola-hyperbola (Wolter I) configuration. This design allows for optimal images on-axis, which however degrade rapidly with the off-axis angle. Mirror surfaces described by polynomia (with terms higher than order two), have been put forward to improve the performances over the field of view. Here we present a refined procedure aimed at optimizing wide-field grazing incidence telescopes for X-ray astronomy. We improve the angular resolution over existing (wide-field) designs by ~ 20%. We further consider the corrections for the different plate scale and focal plane curvature of the mirror shells, which sharpen by another ~ 20% the image quality. This results in a factor of ~ 2 reduction in the observing time needed to achieve the same sensitivity over existing wide-field designs and of ~ 5 over Wolter I telescopes. We demonstrate that such wide-field X-ray telescopes are highly advantageous for deep surveys of the X-ray sky.

astro-ph↗

arXiv2000

Preliminary design of a NIR prime focus corrector for the Galileo Telescope

In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which are aspherical. The first lens diameters are, respectively, of 140 mm and 320 mm for the two kind of detectors. For both designs the telescope pupil is deliberately not re-imaged, and therefore it will not be possible to insert a cold stop. For such a reason particular care has been dedicated to the telescope thermal background study, in order to optimise the baffling system. The optics is able to correct fields of 11' x 11' and of 60'x60', depending on the design. It should be considered that the particular geometry of the focal plane array mosaic does not permit a full exploitation of the entire field, being based on a combination of four detectors. The selected chips are HgCdTe manufactured by Rockwell, i.e. Hawaii I in the 1k x 1k case and Hawaii II in the 2k x 2k case.

astro-ph↗