SearcharxivSearch

arXiv subjects

Paolo Milani

Publications and source records attributed to Paolo Milani.

11 recordsLinked to original sources

Self-organizing Architecture of Receptron Units: a Hardware-Aware Framework for Edge Intelligence

The growing demand for intelligent processing at the edge of IoT networks is constrained by the severe computational and memory limitations of microcontroller units, which render impractical conventional deep learning approaches. We propose a neuromorphicinspired classifier based on the Receptron model, a single-unit architecture capable of implementing non-linearly separable decision boundaries, without resorting to multi-layer networks. The model is designed for direct deployment on mid-range MCUs, while supporting continuous on-device adaptation. Experimental evaluation on basic dataset benchmarks yields cross-validated accuracies compatible with standard machine learning method baselines. These results position the Receptron as a viable and interpretable alternative for resource-constrained neuromorphic edge systems operating in dynamic, non-stationary environments.

cs.LG

Growth mechanism of cluster-assembled surfaces: from sub-monolayer to thin film regime

Nanostructured films obtained by the assembling of preformed atomic clusters are of strategic importance for a wide variety of applications. The deposition of clusters produced in the gas phase onto a substrate offers the possibility to control and engineer the structural and functional properties of the cluster-assembled films. To date the microscopic mechanisms underlying the growth and structuring of cluster-assembled films are poorly understood, and in particular the transition from the sub-monolayer to the thin film regime is experimentally unexplored. Here we report the systematic characterization by Atomic Force Microscopy of the evolution of the structural properties of cluster-assembled films deposited by Supersonic Cluster Beam Deposition. As a paradigm of nanostructured systems, we have focused our attention on cluster-assembled zirconia films, investigating the influence of the building blocks dimensions on the growth mechanisms and on the roughening of the thin films, following the growth process from the early stages of the sub-monolayer to the thin film regime. Our results demonstrate that the growth dynamics in the sub-monolayer regime determines different morphological properties of the cluster-assembled thin film. The evolution of roughness with the number of deposited clusters reproduces exactly the growth exponent of the ballistic deposition in the 2+1 model, from the sub-monolayer to the thin film regime.

cond-mat.mes-hall

Supersonic Cluster Beam Fabrication of a Stretchable Keyboard with Multilayer Electrical Interconnects Integrated with Paper-based Flexible Devices

The development of stretchable and flexible electronics based on soft polymeric substrates requires novel approaches in the design, fabrication, integration, and packaging of passive and active electronic components. Here we demonstrate the fabrication, based on the use of supersonic cluster beam implantation and deposition, of a system consisting of a stretchable keyboard made by PDMS connected with a touch sensor and a matrix of LEDs printed on paper, through paper-based interconnections. The stretchable keyboard has conductive vias to electrically connect the top and bottom layers. Gold conductive films printed on paper are used to connect the keyboard with the electronic components that drive the LED matrix.

physics.app-ph

Nanomanufacturing of titania interfaces with controlled structural and functional properties by supersonic cluster beam deposition

Great emphasis is placed on the development of integrated approaches for the synthesis and the characterization of ad hoc nanostructured platforms, to be used as templates with controlled morphology and chemical properties for the investigation of specific phenomena of great relevance for technological applications in interdisciplinary fields such as biotechnology, medicine and advanced materials. Here we discuss the crucial role and the advantages of thin film deposition strategies based on cluster-assembling from supersonic cluster beams. We select cluster-assembled nanostructured titania (ns-TiO2) as a case study to demonstrate that accurate control over morphological parameters can be routinely achieved, and consequently over several relevant interfacial properties and phenomena, like surface charging in a liquid electrolyte, and proteins and nanoparticles adsorption.

cond-mat.mtrl-sci

Nanomechanical and topographical imaging of living cells by Atomic Force Microscopy with colloidal probes

Atomic Force Microscopy (AFM) has a great potential as a tool to characterize mechanical and morphological properties of living cells; these properties have been shown to correlate with cells' fate and patho-physiological state in view of the development of novel early-diagnostic strategies. Although several reports have described experimental and technical approaches for the characterization of cell elasticity by means of AFM, a robust and commonly accepted methodology is still lacking. Here we show that micrometric spherical probes (also known as colloidal probes) are well suited for performing a combined topographic and mechanical analysis of living cells, with spatial resolution suitable for a complete and accurate mapping of cell morphological and elastic properties, and superior reliability and accuracy in the mechanical measurements with respect to conventional and widely used sharp AFM tips. We address a number of issues concerning the nanomechanical analysis, including the applicability of contact mechanical models and the impact of a constrained contact geometry on the measured elastic modulus (the finite-thickness effect). We have tested our protocol by imaging living PC12 and MDA-MB-231 cells, in order to demonstrate the importance of the correction of the finite-thickness effect and the change in cell elasticity induced by the action of a cytoskeleton-targeting drug.

cond-mat.soft

Vibrational characterization of dinaphthylpolyynes: A model system for the study of end-capped sp carbon chains

We perform a systematic investigation of the resonance and vibrational properties of naphthyl-terminated sp carbon chains (dinaphthylpolyynes) by combined multi-wavelength resonant Raman (MWRR) spectroscopy, ultraviolet-visible spectroscopy, and Fourier-transform infrared (FT-IR) spectroscopy, plus ab initio density functional theory (DFT) calculations. We show that the MWWR and FT-IR spectroscopies are particularly suited to identify chains of different lengths and different terminations, respectively. By DFT calculations, we further extend those findings to sp carbon chains end-capped by other organic structures. The present analysis shows that combined MWRR and FT-IR provide a powerful tool to draw a complete picture of chemically stabilized sp carbon chains.

physics.chem-ph

Synthesis, Characterization, and Modeling of Naphthyl-Terminated sp Carbon Chains: Dinaphthylpolyynes

We report a combined study on the synthesis, spectroscopic characterization and theoretical modelling of a series of α,ω-dinaphthylpolyynes. We synthesized this family of naphtyl-terminated sp carbon chains by reacting diiodoacetylene and 1-ethynylnaphthalene under the Cadiot-Chodkiewicz reaction conditions. By means of liquid chromatography (HPLC), we separated the products and recorded their electronic absorption spectra, which enabled us to identify the complete series of dinaphthylpolyynes Ar-C2n-Ar (with Ar = naphthyl group and n = number of acetilenic units) with n ranging from 2 to 6. The longest wavelength transition (LWT) in the electronic spectra of the dinaphthylpolyynes red shifts linearly with n away from the LWT of the bare termination. This result is also supported by DFT-LDA simulations. Finally, we probed the stability of the dinaphthylpolyynes in a solid-state precipitate by Fourier-transform infrared spectroscopy and by differential scanning calorimetry (DSC).

physics.chem-ph

Flexible and biocompatible microelectrode arrays fabricated by supersonic cluster beam deposition on SU-8

We fabricated highly adherent and electrically conductive micropatterns on SU-8 by supersonic cluster beam deposition (SCBD). This technique is based on the acceleration of neutral metallic nanoparticles produced in the gas phase. The kinetic energy acquired by the nanoparticles allows implantation in a SU-8 layer, thus producing a metal-polymer nanocomposite thin layer. The nanocomposite shows ohmic electrical conduction and it can also be used as an adhesion layer for further metallization with a metallic overlayer. We characterized the electrical conduction, adhesion and biocompatibility of microdevices obtained by SCBD on SU-8 demonstrating the compatibility of our approach with standard lift off technology on 4" wafer. A self-standing and flexible Micro Electrode Array has been produced. Cytological tests with neuronal cell lines demonstrated an improved cell growth and a spontaneous confinement of cells on the nanocomposite layer.

cond-mat.mtrl-sci

Vibrational properties of sp carbon atomic wires in cluster-assembled carbon films

Linear chains made by a single row of sp-hybridized carbon are predicted to display fascinating mechano-electronic properties connected with their termination and stabilization inside realistic carbon structures. The present work describes how the computed vibrational properties of cumulenic and polyynic carbon chains allow one to interpret the carbynic features observed in Raman spectra of cluster-assembled sp-sp2 films. The overall picture is consistent with the measured decay of the sp components induced by air or oxygen exposure.

cond-mat.mes-hall

Effects of axial torsion on sp carbon atomic nanowires

Ab-initio calculations within Density Functional Theory combined with experimental Raman spectra on cluster-beam deposited pure carbon films provide a consistent picture of sp-carbon chains stabilized by sp^3 or sp^2 terminations, the latter being sensitive to torsional strain. This unexplored effect promises many exciting applications since it allows one to modify the conductive states near the Fermi level and to switch on and off the on-chain pi-electron magnetism.

cond-mat.mtrl-sci

Poly(methyl methacrylate) - Palladium clusters nanocomposite formation by supersonic cluster beam deposition: a method for microstructured metallization of polymer surfaces

Nanocomposite films were fabricated by supersonic cluster beam deposition (SCBD) of palladium clusters on Poly(methyl methacrylate) (PMMA) surfaces. The evolution of the electrical conductance with cluster coverage and microscopy analysis show that Pd cluster are implanted in the polymer and form a continuous layer extending for several tens of nanometers beneath the polymer surface. This allows the deposition, using stencil masks, of cluster-assembled Pd microstructures on PMMA showing a remarkably high adhesion compared to metallic films obtained by thermal evaporation. These results suggest that SCBD is a promising tool for the fabrication of metallic microstructures on flexible polymeric substrates.

cond-mat.mtrl-sci