arXiv subjects

Paolo Piergentili

Publications and source records attributed to Paolo Piergentili.

12 recordsLinked to original sources

arXiv2025

Large amplitude mechanical coherent states and detection of weak nonlinearities in cavity optomechanics

The generation of large-amplitude coherent states of a massive mechanical resonator, and their quantum-limited detection represent useful tools for quantum sensing and for testing fundamental physics theories. In fact, any weak perturbation may affect the coherent quantum evolution of the prepared state, providing a sensitive probe for such a perturbation. Here we consider a cavity optomechanical setup and the case of the detection of a weak mechanical nonlinearity. We consider different strategies, first focusing on the stationary dynamics in the presence of multiple tones driving the system, and then focusing on non-equilibrium dynamical strategies. These methods can be successfully applied for measuring Duffing-like material nonlinearities, or effective nonlinear corrections associated with quantum gravity theories.

quant-ph↗

arXiv2025

Mechanical characterization of a membrane with an on-chip loss shield in a cryogenic environment

The quantum transduction of an rf/microwave signal to the optical domain, and vice versa, paves the way for technologies that exploit the advantages of each domain to perform quantum operations. Since electro-optomechanical devices implement a simultaneous coupling of a mechanical oscillator to both an rf/microwave field and an optical field, they are suitable for the realization of a quantum transducer. The membrane-in-the-middle setup is a possible solution, once its vibrational mode is cooled down to ultra cryogenic temperature for achieving quantum operation. This work is focused on the mechanical characterization via an optical interferometric probe, down to T=18mK, of a loss-shielded metalized membrane designed for this purpose. A stroboscopic technique has been exploited for revealing a mechanical quality factor up to 64 millions at the lowest temperature. In fact, with continuous illumination and a cryostat temperature below 1K, the heat due to optical absorption is not efficiently dissipated anymore, and the membrane remains hotter than its environment.

quant-ph↗

arXiv2025

Full dynamics of two-membrane cavity optomechanics

In a two-membrane cavity optomechanical setup, two semi-transparent membranes placed within an optical Fabry-Pérot cavity yield a nontrivial dependence of the frequency of a mode of the optical cavity on the membranes' positions, which is due to interference. However, the system dynamics is typically described by a radiation pressure force treatment in which the frequency shift is expanded stopping at first order in the membrane displacements. In this paper, we study the full dynamics of the system obtained by considering the exact nonlinear dependence of the optomechanical interaction between two membranes' vibrational modes and the driven cavity mode. We then compare this dynamics with the standard treatment based on the Hamiltonian linear interaction, and we find the conditions under which the two dynamics may significantly depart from each other. In particular, we see that a parameter regime exists in which the customary first-order treatment provides distinct and incorrect predictions for the synchronization of two self-sustained mechanical limit-cycles, and for Gaussian entanglement of the two membranes in the case of two-tone driving.

quant-ph↗

arXiv2025

Two-membrane etalon

Optomechanics with semi-transparent membrane multi-oscillators in a high-finesse cavity is an established solution for designing the dispersive interaction, and reaching many achievements, such as the study of non-linear dynamics, heat transfer, and so on. The multi-oscillators are dielectric slabs, usually with low reflectivity, constituting an etalon. Here we propose the theoretical and experimental investigation of a low-finesse optical cavity formed by two (nominally identical) parallel semi-transparent membranes. The experiment consists in laser-driving the cavity, detecting interferometrically the field reflected by the etalon, and measuring the intensity of the transmitted field, for different distances within the two membranes. A complete characterization of the membrane sandwich is provided. On the other hand, we developed an analytical model to describe the fields, which reproduces all the experimental results, under specific approximations. As expected, the model reproduces the known results when high-reflectivity, and/or fixed mirrors conditions are restored. This work paves the way for a complete and analytical model to describe multi-oscillators "membrane-in-the-middle" optomechanics.

quant-ph↗

arXiv2023

Amplitude and phase noise in Two-membrane cavity optomechanics

Cavity optomechanics is a suitable field to explore quantum effects on macroscopic objects and develop quantum technology applications. A perfect control of the laser noise is required to operate the system in such extreme conditions necessary to reach the quantum regime. In this paper, we consider a Fabry-Perót cavity, driven by two laser fields, with two partially reflective SiN membranes inside it. We describe the effects of amplitude and phase noise on the laser introducing two additional noise terms in the Langevin equations of the system's dynamics. Experimentally, we add an artificial source of noise on the laser. We calibrate the intensity of the noise, inject it into the system, and check the validity of the theoretical model. This procedure provides an accurate description of the effects of a noisy laser in the optomechanical setup and allows for quantifying the amount of noise.

quant-ph↗

arXiv2023

Low Noise Opto-Electro-Mechanical Modulator for RF-to-Optical Transduction in Quantum Communications

In this work, we present an Opto-Electro-Mechanical Modulator (OEMM) for RF-to-optical transduction realized via an ultra-coherent nanomembrane resonator capacitively coupled to an rf injection circuit made of a microfabricated read-out able to improve the electro-optomechanical interaction. This device configuration can be embedded in a Fabry-Perot cavity for electromagnetic cooling of the LC circuit in a dilution refrigerator exploiting the opto-electro-mechanical interaction. To this aim, an optically measured steady-state frequency shift of 380 Hz was seen with a polarization voltage of 30 V and a $Q$-factor of the assembled device above $10^6$ at room temperature. The rf-sputtered titanium nitride layer can be made superconductive to develop efficient quantum~transducers.

quant-ph↗

arXiv2021

Two-membrane cavity optomechanics: non-linear dynamics

We study the non-linear dynamics of a multimode optomechanical system constituted of a driven high-finesse Fabry-Pérot cavity containing two vibrating dielectric membranes. The analytical study allows to derive a full and consistent description of the displacement detection by a probe beam in the non-linear regime, enabling the faithful detection of membrane displacements well above the usual sensing limit corresponding to the cavity linewidth. In the weak driving regime where the system is in a pre-synchronized situation, the unexcited oscillator has a small, synchronized component at the frequency of the excited one; both large and small amplitude resonator motions are transduced in a nontrivial way by the non-linear response of the optical probe beam. We find perfect agreement between the experimental results, the numerical simulations, and an analytical approach based on slowly-varying amplitude equations.

quant-ph↗

arXiv2021

Silicon-nitride nanosensors toward room temperature quantum optomechanics

Observation of quantum phenomena in cryogenic, optically cooled mechanical resonators has been recently achieved by a few experiments based on cavity optomechanics. A well-established experimental platform is based on a thin film stoichiometric ($ Si_3 N_4 $) nanomembrane embedded in a Fabry-Perot cavity, where the coupling with the light field is provided by the radiation pressure of the light impinging on the membrane surface. Two crucial parameters have to be optimized to ensure that these systems work at the quantum level: the cooperativity $ C$ describing the optomechanical coupling and the product $ Q \times ν$ (quality factor - resonance frequency) related to the decoherence rate. A significant increase of the latter can be obtained with high aspect-ratio membrane resonators where uniform stress dilutes the mechanical dissipation. Furthermore, ultra-high $Q \times ν$ can be reached by drastically reducing the edge dissipation via clamp-tapering and/or by soft-clamping, virtually a clamp-free resonator configuration. In this work, we investigate, theoretically and experimentally, the edge loss mechanisms comparing two state-of-the-art resonators built by standard micro/nanofabrication techniques. The corresponding results would provide meaningful guidelines for designing new ultra-coherent resonating devices.

physics.optics↗

arXiv2021

Sympathetic cooling of a radio-frequency LC circuit to its ground state in an optoelectromechanical system

We present a complete theory for laser cooling of a macroscopic radio-frequency LC electrical circuit by means of an optoelectromechanical system, consisting of an optical cavity dispersively coupled to a nanomechanical oscillator, which is in turn capacitively coupled to the LC circuit of interest. We determine the optimal parameter regime where the LC resonator can be cooled down to its quantum ground state, which requires a large optomechanical cooperativity, and a larger electromechanical cooperativity. Moreover, comparable optomechanical and electromechanical coupling rates are preferable for reaching the quantum ground state.

quant-ph↗

arXiv2021

Absolute determination of the single-photon optomechanical coupling rate via a Hopf bifurcation

We establish a method for the determination of the single-photon optomechanical coupling rate, which characterizes the radiation pressure interaction in an optomechanical system. The estimation of the rate with which a mechanical oscillator, initially in a thermal state, undergoes a Hopf bifurcation, and reaches a limit cycle, allows us to determine the single-photon optomechanical coupling rate in a simple and consistent way. Most importantly, and in contrast to other methods, our method does not rely on knowledge of the system's bath temperature and on a calibration of the signal. We provide the theoretical framework, and experimentally validate this method, providing a procedure for the full characterization of an optomechanical system, which could be extended outside cavity optomechanics, whenever a resonator is driven into a limit cycle by the appropriate interaction with another degree of freedom.

quant-ph↗

arXiv2019

Noise robustness of synchronization of two nanomechanical resonators coupled to the same cavity field

We study synchronization of a room temperature optomechanical system formed by two resonators coupled via radiation pressure to the same driven optical cavity mode. By using stochastic Langevin equations and effective slowly-varying amplitude equations, we explore the long-time dynamics of the system. We see that thermal noise can induce significant non-Gaussian dynamical properties, including the coexistence of multi-stable synchronized limit cycles and phase diffusion. Synchronization in this optomechanical system is very robust with respect to thermal noise: in fact, even though each oscillator phase progressively diffuses over the whole limit cycle, their phase difference is locked, and such a phase correlation remains strong in the presence of thermal noise.

physics.optics↗

arXiv2018

Two-membrane cavity optomechanics

We study the optomechanical behaviour of a driven Fabry-Pérot cavity containing two vibrating dielectric membranes. We characterize the cavity-mode frequency shift as a function of the two-membrane positions, and report a $\sim 2.47$ gain in the optomechanical coupling strength of the membrane relative motion with respect to the single membrane case. This is achieved when the two membranes are properly positioned to form an inner cavity which is resonant with the driving field. We also show that this two-membrane system has the capability to tune the single-photon optomechanical coupling on demand, and represents a promising platform for implementing cavity optomechanics with distinct oscillators. Such a configuration has the potential to enable cavity optomechanics in the strong single-photon coupling regime, and to study synchronization in optically linked mechanical resonators.

quant-ph↗