arXiv subjects

Paolo Soffitta

Publications and source records attributed to Paolo Soffitta.

At least 37 records · Page 2Linked to original sources

arXiv2026

Unlocking the Future of X-Ray Polarimetry with IXPE: Lessons Learned and Next Steps

This paper discusses issues encountered during the early development of the instrument on the Imaging X-ray Polarimetry Explorer (IXPE), a NASA ASI Small Explorer mission launched on 9 December 2021. IXPE has observed about 100 sources, yielding meaningful polarimetry for most of them. An on-board calibration system mitigated most non-ideal detector behaviors during operations. Data from the on-board polarized and unpolarized X-ray sources are routinely ingested by the flight pipeline to correct the instrument response in a manner transparent to users. Based on its scientific return and payload health, the IXPE mission has been extended through 2028. The lessons learned are informing the design of next-generation X-ray polarimetry missions, as discussed elsewhere in these conferences.

astro-ph.IM↗

arXiv2026

Spectral performance of single-channel plastic and GAGG scintillator bars of the CUbesat Solar Polarimeter (CUSP)

Our Sun is the closest X-ray astrophysical source to Earth. As such, it makes a formidable case study to better understand astrophysical processes. Solar flares are in particular very interesting as they are linked to coronal mass ejections as well as magnetic field reconnection sites in the solar atmosphere. Flares can therefore provide insightful information on the physical processes at play on their production sites, but also on the emission and acceleration of energetic charged particles towards our planet, making it a formidable forecasting tool for space weather. While solar flares are critical to understanding magnetic reconnection and particle acceleration, their hard X-ray polarization -- key to distinguishing between competing theoretical models -- remains poorly constrained by existing observations. To address this, we present the CUbesat Solar Polarimeter (CUSP), a mission under development to perform solar flare polarimetry in the 25-100 keV energy range. CUSP consists of a 6U-XL platform hosting a dual-phase Compton polarimeter. The polarimeter is made of a central assembly of four 4x4 arrays of plastic scintillators, each coupled to multi-anode photomultiplier tubes, surrounded by four strips of eight elongated GAGG scintillator bars coupled to avalanche photodiodes. Both types of sensors from Hamamatsu are respectively read out by the MAROC-3A and SKIROC-2A ASICs from Weeroc. In this manuscript, we present the preliminary spectral performances of single plastic and GAGG channels measured in the laboratory using development boards of the ASICs foreseen for the flight model.

astro-ph.IM↗

arXiv2025

The First X-Ray Polarimetry of an Eclipsing Low-Mass X-Ray Binary: Serendipitous IXPE Observation of AX J1745.6-2901

We present the first X-ray polarimetric measurement of the neutron star low-mass X-ray binary system AX J1745.6-2901 conducted by the Imaging X-ray Polarimetry Explorer (IXPE) satellite. This transient source, located within $ \sim $1.5' of the Galactic center, was observed serendipitously during a MAXI J1744-294 observation with a duration of 150 ks. The complex nature of the region in which AX J1745.6-2901 is located poses a challenge for studying its polarization. By performing a detailed analysis of the contamination from MAXI J1744-294 and the Galactic center diffuse emission, we find the source polarization degree PD = 14.7$\% \pm$ 4.0$\%$ and polarization angle PA = 122$^\circ \pm 8^\circ$. The phase-resolved analysis shows increase in polarization during the eclipse phase, with PD = 34.2$\% \pm$ 8.7$\%$, suggesting that the polarization-inducing mechanisms are of scattering nature, probably originating from disk winds.

astro-ph.HE↗

arXiv2025

Super-Eddington Accretion Geometry: a Remarkable Stability of the Hidden Ultraluminous X-Ray Source Cygnus X-3

We report on the average and orbital phase-resolved polarization of Cyg X-3 in the hard state during the 2023 Imaging X-ray Polarimetry Explorer (IXPE) observational campaign. We find the polarization degree of $ 21.2 \pm 0.4 \% $ and polarization angle of $ 92.2 \pm 0.5^\circ $, well compatible with the first hard-state IXPE observation in 2022. As the observed polarization depends on both the accretion geometry and the X-ray emission mechanism, which we attribute to reflection from the optically thick envelope surrounding the central source, our result indicates that both are very stable on year-long timescale. We discuss time- and energy-dependent polarization properties and their implications for the geometry and stability of the accretion funnel.

astro-ph.HE↗

arXiv2025

Detection of Compton scattering in the jet of 3C 84

3C 84 is the brightest cluster galaxy in the Perseus Cluster. It is among the closest radio-loud active galaxies and among the very few that can be detected from low frequency radio up to TeV $γ$-rays. Here we report on the first X-ray polarization observation of 3C~84 with the Imaging X-ray Polarimetry Explorer, for a total of 2.2 Msec that coincides with a flare in $γ$-rays. This is the longest observation for a radio-loud active galaxy that allowed us to reach unprecedented sensitivity, leading to the detection of an X-ray polarization degree of $\rmΠ_X=4.2\pm1.3\%$ ($\sim3.2σ$ confidence) at an X-ray electric vector polarization angle of $\rm ψ_X=163^{\circ}\pm9^{\circ}$, that is aligned with the radio jet direction on the sky. Optical polarization observations show fast variability about the jet axis as well. Our results strongly favor models in which X-rays are produced by Compton scattering from relativistic electrons -- specifically Synchrotron Self-Compton -- that takes places downstream, away from the supermassive black hole.

astro-ph.HE↗

arXiv2025

In-flight performance of the IXPE telescopes

We present a comprehensive characterization of the on-orbit imaging performance of the three telescopes on board the Imaging X-ray Polarimetry Explorer (IXPE). Each telescope comprises a Wolter-I mirror module assembly and a Gas Pixel Detector focal-plane detector unit (DU). We analyze data from point-like X-ray sources and fit a composite point spread function (PSF) model that we compare with ground calibrations. We study the dependence of the PSF parameters and of the angular resolution, in terms of half-power diameter (HPD), on the time and source counting rate. We find no significant secular evolution of PSF parameters or HPD over 30 months on orbit, with average HPDs of $26.1 \pm 0.5$ arcsec (Telescope 1), $32.1 \pm 0.5$ arcsec (Telescope 2), and $30.9 \pm 0.6$ arcsec (Telescope 3), and rate trends consistent with zero up to source counting rates of $\sim60$ cts s$^{-1}$ in the 2-3 keV energy band for all three telescopes. We set a 99% C.L. upper limit of 4.4% on the optics-induced polarization in the PSF halo, and find no measurable degradation of the polarization modulation factor in the wings versus the core due to mis-reconstructed photoelectron tracks. IXPE's imaging performance thus is consistent with the $\leq30$ arcsec observatory requirement with high stability, ensuring robust spatially resolved polarization measurements for the mission's projected lifetime through 2030.

astro-ph.IM↗

arXiv2025

Solar Flare Hard X-ray Polarimetry with the CUbesat Solar Polarimeter (CUSP) mission

The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission planned for a launch in low-Earth orbit and aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed at developing new CubeSat missions. It is undergoing a 12-month Phase B that started in December 2024. The Compton polarimeter on board CUSP is composed of two acquisition chains based on plastic scintillators read out by Multi-Anode PhotoMultiplier Tubes for the scatterer part and GAGG crystals coupled to Avalanche PhotoDiodes for the absorbers. An event coincident between the two readout schemes will lead to a measurement of the incoming X-ray's azimuthal scattering angle, linked to the polarization of the solar flare in a statistical manner. The current status of the CUSP mission design, mission analysis, and payload scientific performance will be reported. The latter will be discussed based on preliminary laboratory results obtained in parallel with Geant4 simulations.

astro-ph.SR↗

arXiv2025

The legacy of the IXPE instrument and prospects for the next generation of polarimetric photoelectric X-ray detectors

Imaging X-ray polarimetry with IXPE has demonstrated the scientific potential of the technique but also revealed the need for significant detector upgrades, particularly with the read-out ASIC that images photoelectron tracks and possibly the multiplication stage. Building on this experience, we are developing a next generation three-dimensional photoelectron track polarimeter based on the GridPix detector, originally developed for axion and axion-like-particle searches. We report on the current status of prototype development and preparations for the ion-irradiation tests. Preliminary proton beam irradiation runs at the Bonn Isochronous Cyclotron facility of the University of Bonn verified both this generation of ASIC's tolerance to high radiation doses present in space and the capability of the cyclotron facility to operate at sufficiently low rates for controlled tests.

astro-ph.IM↗

arXiv2025

The multi-physics analysis, design and testing of CUSP, a CubeSat mission for space weather and solar flares x-ray polarimetry

The space-based CUbesat Solar Polarimeter (CUSP) mission aims to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed at developing new CubeSat missions. As part of CUSP's Phase B study, which began in December 2024 and will last one year, we present the current development status of the design solutions adopted for the mission's most critical multi-physics design drivers. These solutions have been formulated and applied to demonstrate compliance with system requirements at both the spacecraft and platform levels. In particular, we describe the mechanical design of each structural component, the results of static, dynamic finite element analyses, and a proposal for topological optimization of the interface between the platform and payload and some fixture for test, and the preliminary environmental testing campaign (e.g., vibration, shock) that will be carried out on a mechanical demonstrator.

astro-ph.IM↗

arXiv2025

The CUbesat Solar Polarimeter (CUSP): mission overview II

The CUbesat Solar Polarimeter (CUSP) project is an Earth-orbiting CubeSat mission designed to measure the linear polarization of solar flares in the hard X-ray band using a Compton scattering polarimeter. CUSP will enable the study of magnetic reconnection and particle acceleration within the Sun's flaring magnetic structures. This project is being developed within the framework of the Italian Space Agency's Alcor Program, which aims to foster new CubeSat missions. CUSP entered its Phase B in December 2024, a phase scheduled to last 12 months. This paper reports on the current status of the CUSP mission design, mission analysis, and payload scientific performance.

astro-ph.SR↗

arXiv2025

CUbesat Solar Polarimeter (CUSP) Sensitivity Estimation and Performance Optimization using Geant4

The CUbesat Solar Polarimeter (CUSP) aims to measure the linear polarization of solar flares in the 25-100 keV X-ray band using a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star by providing high-sensitivity polarization measurements. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop innovative CubeSat technologies and missions. As part of CUSPs Phase B study, which began in December 2024 and will continue for one year, we present the development status of the Geant4 based simulator to accurately simulate the detectors response and initial results on the sensitivity of the instrument. Geant4 Monte Carlo simulation is used to assess the physical interactions of the source photons with the detector and the passive materials. We implemented a detailed CUSP Mass Model within Geant4 to simulate and estimate the instruments sensitivity, correcting the geometric effects of the instrument. We also evaluated the effect of backscattering shielding on the sensitivity to optimize the mass model of the instrument.

astro-ph.SR↗

arXiv2025

Prototype Development and Calibration of the CUbesat Solar Polarimeter (CUSP)

The space-based CUbesat Solar Polarimeter (CUSP) mission aims to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star with its unprecedented sensitivity to solar flare polarization. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop new CubeSat missions. It has been proposed as a constellation of a two Cubesat mission to monitor the Sun for Space Weather, and will proceed with a single-satellite asset in its baseline implementation. In the frame of CUSP's Phase B study, that started in December 2024 for a 1-year period, we present the development status of this dual-phase polarimeter. Preliminary laboratory results using two chains of acquisition will be discussed. The first chain of acquisition, based on the Hamamatsu R7600 multi-anode photomultiplier tubes coupled to plastic scintillator bars and read out by the MAROC-3A ASIC, is used to detect the Compton scattering of incoming photons. On the other hand, GAGG crystals coupled to avalanche photo-diodes with a readout based on the SKIROC-2A ASIC are used to absorb the scattered photons. By reconstructing the azimuthal scattering direction for many incoming photons, one can infer the linear polarization degree and angle of the source. We will discuss the calibration results obtained with our prototype detector by using well-known radioactive isotopes, allowing us to assess the performances of our detector over the full 25-100 keV energy range.

astro-ph.IM↗

arXiv2025

Study of the HV power supply modules for the CUbesat Solar Polarimeter (CUSP)

The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop new CubeSat missions. CUSP undergoing the Phase B started in December 2024 that will last for 12 month. The Compton polarimeter of the CUSP payload performs coincidence measurements between plastic scintilaltors and GaGG(Ce) crystals to derive the polarization of X-rays. These sensors are readout by Multi Anode Photomultiplier Tubes (MAPMTs) and Avalanche Photodiodes (APDs) respectively. Both sensors need an HV power supply up to -1~kV (for the MAPMT) and +500~V (for the APD). We tested precision regulated High Voltage DC/DC Converters by HVM Technology Inc. with Sub-Miniature Case Size ($0.85''\times0.85''\times0.60''$) of the SMHV series. These modules are compact and suited for CubeSat missions.

astro-ph.IM↗

arXiv2025

X-ray Polarization Detection of the Pulsar Wind Nebula in G21.5-0.9 with IXPE

We present the X-ray polarization observation of G21.5-0.9, a young Galactic supernova remnant (SNR), conducted with the Imaging X-ray Polarimetry Explorer (IXPE) in October 2023, with a total livetime of approximately 837 ks. Using different analysis methods, such as a space-integrated study of the entire region of the PWN and a space-resolved polarization map, we detect significant polarization from the pulsar wind nebula (PWN) at the center of the SNR, with an average polarization degree of ~10% oriented at ~33° (north through east). No significant energy-dependent variation in polarization is observed across the IXPE band (2-8 keV). The polarization map, corrected for the effect of polarization leakage, reveals a consistent pattern in both degree and angle, with little change across the nebula. Our findings indicate the presence of a highly polarized central torus, suggesting low levels of turbulence at particle acceleration sites. Unlike Vela, but similar to the Crab Nebula, we observe substantial differences between radio and X-ray polarization maps. This suggests a clear separation in energy of the emitting particle populations and hints at an important, yet poorly understood, role of instabilities in the turbulence dynamics of PWNe.

astro-ph.HE↗

arXiv2025

Exploring MAXI J1744-294: IXPE insights into a Newly Discovered X-ray Transient

We present the first IXPE spectro-polarimetric observation of the black hole candidate MAXI J1744$-$294, a transient X-ray source discovered during a bright 2025 outburst in the Galactic center region. During the $\sim$150 ks observation, the source was found in the soft state, and its spectrum was well described by an absorbed multicolor disk with a minor high-energy tail. No significant polarization was detected, and we derived a 3$σ$ upper limit on the polarization degree of $1.3\%$ in the 2--8 keV energy band. This result is consistent with previous findings for soft-state black hole binaries observed at low to intermediate inclination angles. By comparing the polarization degree upper limit with theoretical predictions for standard accretion disk emission, we constrain the disk inclination to $i \lesssim 38^\circ$--$71^\circ$, depending on the black hole spin and the disk atmosphere albedo.

astro-ph.HE↗

arXiv2025

X-ray linear polarization prediction in Black-Hole binaries and Active Galactic Nuclei and its measurements by IXPE

We present a theoretical framework for the formation of X-ray linear polarization in black hole (BH) source. The X-ray linear polarization originates from up-scatterings of initially soft photons within a hot, optically thick Compton cloud (CC) characterized by a flat geometry. The IXPE observations of several BHs X-ray binaries and of one Seyfert-1 galaxy confirm our theoretical prediction regarding values of the linear polarization P. The goal of this paper is to demonstrate that the main physical parameters of these Galactic and extragalactic sources can be derived without any free parameter using the polarization and X-ray spectral measurements. We estimate the CC optical depth, τ0 for all BHs observed by IXPE, using the plot of P vs μ = cos i, where i is an observer inclination with respect to the normal, and considering the values P for a given source. Using X ray spectral analysis, we obtain the photon index Γ and, analytically determined the CC plasma temperature kBTe. Different BHs (Cyg X 1, 4U 1630 47, LMC X 1, 4U 1957+115, Swift J1727.8 1613, GX 339 4) and the Seyfert 1 NGC 4151 exhibited polarization between 1 and 8 percent level nearly independently of energy. kBTe is in the range between 5 and 90 keV with a smaller value in High/Soft State with respect to Low/Hard State. We find a similarity between the physical parameter and the IXPE findings and we provide evidence suggesting that the CC exhibits a flat geometry.

astro-ph.HE↗

arXiv2025

Mitigating Polarization Leakage in Gas Pixel Detectors through Hybrid Machine Learning and Analytic Event Reconstruction

Spatially resolved polarization measurements of extended X-ray sources are expanding our understanding of the emission mechanisms and magnetic field properties involved. Such measurements have been possible in the past few years thanks to the Imaging X-ray Polarimetry Explorer (IXPE). However, the analysis of extended sources suffers a systematic effect known as polarization leakage, which artificially affects the measured polarization signal. To address this issue, we built a hybrid reconstruction algorithm, which combines machine learning and analytic techniques to improve the reconstruction of photoelectron tracks in the Gas Pixel Detector and to significantly mitigate polarization leakage. This work presents the first application of this hybrid method to experimental data, including both calibration lab measurements and IXPE observational data. We confirmed the reliable performance of the hybrid method for both cases. Additionally, we demonstrated the algorithm's effectiveness in reducing the polarization leakage effect through the analysis of the IXPE observation of the supernova remnant G21.5-0.9. By enabling more reliable polarization measurements, this method can potentially yield deeper insights into the magnetic field structures, particle acceleration processes, and emission mechanisms at work within extended X-ray sources.

astro-ph.IM↗

arXiv2025

X-ray polarization in SN 1006 southwest shows spatial variations and differences with the radio band

We report the detection of a spatial variation of X-ray polarization in the southwestern shell of SN 1006 (SN 1006 SW) using IXPE. The shell has an average X-ray polarization degree (PD) of $21.6\%\pm 4.5\%$ and polarization angle (PA) of $-48^\circ \pm 5^\circ$ in the 2--4 keV energy band, similar to those in the northeastern shell. The PD varies along SN 1006 SW, with a peak PD$= 40\%\pm 8\%$ in the south and a significantly lower PD $\lesssim 27\%$ (99\% upper limit) in the west where the shell has been proposed to be interacting with an interstellar cloud. The correlation between the PD, which reflects the magnetic orderliness, and the preshock density provides observational evidence that magnetic turbulence and amplification are environment-dependent. The high PD detected in the southern region of the shell constrains the magnetic turbulence scale of $\lesssim 0.1$~pc. Moreover, by comparing the IXPE X-ray and MeerKAT radio polarization measurements for SN 1006 SW, we found that magnetic fields traced by X-ray polarization are nearly radially distributed, whereas those traced by radio polarization tend to follow a direction parallel to the Galactic plane. This suggests that the X-ray polarization probes freshly amplified magnetic fields from small-scale structures in the immediate postshock region, while the radio traces more extended regions influenced by the pre-existing ambient magnetic fields.

astro-ph.HE↗