Searcharxiv⌕ Search

arXiv subjects

Paparao Palacharla

Publications and source records attributed to Paparao Palacharla.

9 recordsLinked to original sources
arXiv2024

Introducing 4D Geometric Shell Shaping for Mitigating Nonlinear Interference Noise

Four dimensional geometric shell shaping (4D-GSS) is introduced as an approach for closing the nonlinearity-caused shaping gap. This format is designed at the spectral efficiency of 8 b/4D-sym and is compared against polarization-multiplexed 16QAM (PM-16QAM) and probabilistically shaped PM-16QAM (PS-PM-16QAM) in a 400ZR-compatible transmission setup with high amount of nonlinearities. Reach increase and nonlinearity tolerance are evaluated in terms of achievable information rates and post-FEC bit-error rate. Numerical simulations for a single-span, single-channel show that 4D-GSS achieves increased nonlinear tolerance and reach increase against PM-16QAM and PS-PM-16QAM when optimized for bit-metric decoding (RBMD). In terms of RBMD, gains are small with a reach increase of 1.7% compared to PM-16QAM. When optimizing for mutual information, a larger reach increase of 3% is achieved compared to PM-16QAM. Moreover, the introduced GSS scheme provides a scalable framework for designing well-structured 4D modulation formats with low complexity.

eess.SP↗
arXiv2021

High-Cardinality Hybrid Shaping for 4D Modulation Formats in Optical Communications Optimized via End-to-End Learning

In this paper we carry out a joint optimization of probabilistic (PS) and geometric shaping (GS) for four-dimensional (4D) modulation formats in long-haul coherent wavelength division multiplexed (WDM) optical fiber communications using an auto-encoder framework. We propose a 4D 10 bits/symbol constellation which we obtained via end-to-end deep learning over the split-step Fourier model of the fiber channel. The constellation achieved 13.6% reach increase at a data rate of approximately 400 Gbits/second in comparison to the ubiquitously employed polarization multiplexed 32-QAM format at a forward error correction overhead of 20%.

eess.SP↗
arXiv2021

Kurtosis-limited Sphere Shaping for Nonlinear Interference Noise Reduction in Optical Channels

Nonlinear interference (NLI) generated during the propagation of an optical waveform through the fiber depends on the fourth order standardized moment of the channel input distribution, also known as kurtosis. Probabilistically-shaped inputs optimized for the linear Gaussian channel have a Gaussian-like distribution with high kurtosis. For optical channels, this leads to an increase in NLI power and consequently, a decrease in effective signal-to-noise ratio (SNR). In this work, we propose kurtosis-limited enumerative sphere shaping (K-ESS) as an algorithm to generate low-kurtosis shaped inputs. Numerical simulations at a shaping blocklength of 108 amplitudes demonstrate that with K-ESS, it is possible to increase the effective SNRs by 0.4 dB in a single-span single-channel scenario at 400 Gbit/s. K-ESS offers also a twofold decrease in frame error rate with respect to Gaussian-channel-optimal sphere shaping.

eess.SP↗
arXiv2020

CoFF: Cooperative Spatial Feature Fusion for 3D Object Detection on Autonomous Vehicles

To reduce the amount of transmitted data, feature map based fusion is recently proposed as a practical solution to cooperative 3D object detection by autonomous vehicles. The precision of object detection, however, may require significant improvement, especially for objects that are far away or occluded. To address this critical issue for the safety of autonomous vehicles and human beings, we propose a cooperative spatial feature fusion (CoFF) method for autonomous vehicles to effectively fuse feature maps for achieving a higher 3D object detection performance. Specially, CoFF differentiates weights among feature maps for a more guided fusion, based on how much new semantic information is provided by the received feature maps. It also enhances the inconspicuous features corresponding to far/occluded objects to improve their detection precision. Experimental results show that CoFF achieves a significant improvement in terms of both detection precision and effective detection range for autonomous vehicles, compared to previous feature fusion solutions.

cs.CV↗
arXiv2020

Performance Analysis of RSU-based Multihomed Multilane Vehicular Networks

Motivated by the potentially high downlink traffic demands of commuters in future autonomous vehicles, we study a network architecture where vehicles use Vehicle-to-Vehicle (V2V) links to form relay network clusters, which in turn use Vehicle-to-Infrastructure (V2I) links to connect to one or more Road Side Units (RSUs). Such cluster-based multihoming offers improved performance, e.g., in coverage and per user shared rate, but depends on the penetration of V2V-V2I capable vehicles and possible blockage, by legacy vehicles, of line of sight based V2V links, such as those based on millimeter-wave and visible light technologies. This paper provides a performance analysis of a typical vehicle's connectivity and throughput on a highway in the free-flow regime, exploring its dependence on vehicle density, sensitivity to blockages, number of lanes and heterogeneity across lanes. The results show that, even with moderate vehicle densities and penetration of V2V-V2I capable vehicles, such architectures can achieve substantial improvements in connectivity and reduction in per-user rate variability as compared to V2I based networks. The typical vehicle's performance is also shown to improve considerably in the multilane highway setting as compared to a single lane road. This paper also sheds light on how the network performance is affected when vehicles can control their relative positions, by characterizing the connectivity-throughput tradeoff faced by the clusters of vehicles.

eess.SY↗