arXiv subjects

Paris Franz

Publications and source records attributed to Paris Franz.

11 recordsLinked to original sources

arXiv2026

Mutually phase-stable tunable attosecond soft X-ray attosecond pulses from a free-electron laser

We demonstrate the production of mutually phase-stable attosecond X-ray pulse pairs with tunable relative time delays and phases in a cascaded X-ray free-electron laser. We showcase the method in an experiment at the LCLS-II, in which a shaped electron beam is used in a split undulator configuration to generate the two attosecond pulses. We achieve mutual phase stability by reusing microbunching generated in the first undulator in order to seed the FEL process in the second at a detuned frequency. We measure controllable temporal delays between the two pulses directly in the time domain using angular streaking of photoelectrons, with a step size of 250 attoseconds. We then show that the behavior of the X-ray spectrum is consistent with phase stability between the two pulses, with a relative phase that can be easily tuned using inter-undulator phase shifters. This method is particularly well-suited to few to ten eV energy separations and sub to few femtosecond time delays, which are ideal for experiments in the soft X-ray regime for pushing the limits of our models for molecular dynamics and exerting direct coherent control over quantum systems.

physics.acc-ph↗

arXiv2026

Broadband hard X-ray attosecond pulses from extremely chirped electron beams

Attosecond pulses from free-electron lasers have opened the doors to atomic site-specific studies of bound electronic dynamics on their natural, sub-femtosecond timescales. Key to their success has been electron beam shaping techniques enabling the generation of sub-femtosecond current spikes with peak currents on the order of 10 kA. We demonstrate in an RF linac the generation of current spikes with extreme chirps on the order of 350 MeV/micron, directly competitive with the chirps expected from beam-driven plasma wakefield accelerators. Leveraging chirp-taper compensation, we use these highly chirped beams to generate hard X-ray attosecond pulses with bandwidths exceeding 30 eV, a factor of two beyond previous demonstrations. We simultaneously present the first explicit experimental evidence of chirp-taper compensation in an attosecond XFEL, finding that optimal tapering improves the bandwidth and pulse energy by factors of two and five, respectively, for our conditions. In addition to the immediate utility of such broadband hard X-ray pulses, electron beams with such extreme chirps can be utilized for unique new experimental modalities by performing further compression after the undulators. Such post-lasing compression can enable subsequent superradiant light emission at longer wavelengths, or direct excitation of quantum systems with the beam's intense space-charge field for unique attosecond pump-probe possibilities.

physics.acc-ph↗

arXiv2026

Advanced Control of Electron Beams: Tailoring X-ray Production with Programmable Laser Shaping

Leveraging the full scientific capabilities of next-generation high-repetition-rate free-electron lasers requires programmable control over electron-beam properties at their source. The photoinjector drive laser defines the electron beam's initial six-dimensional phase-space distribution, yet has historically been limited to Gaussian or static flat-top profiles, with most manipulation occurring downstream. Here we demonstrate software-programmable ultraviolet pulse shaping at the LCLS-II photoinjector as a source-level actuator that complements traditional accelerator controls. Using a coupled architecture combining dispersion-controlled nonlinear frequency conversion with spatial-light-modulator spectral shaping, we generate user-defined temporal structures and observe their imprint on electron bunches through high-resolution time-domain diagnostics. Laser-imposed multi-peaked modulation persists through acceleration, magnetic compression, and undulator transport with shot-to-shot repeatability, producing clearly resolved current structure in the compressed beam. Variance-based reconstruction from transverse deflecting cavity measurements reveals structured X-ray emission profiles exhibiting temporal features consistent with the programmed laser waveform. By providing rapid, software-controlled reconfiguration of electron-beam initial conditions, this source-level control approach establishes a programmable upstream actuator for future adaptive optimization and autonomous facility operation at high-repetition-rate light sources.

physics.acc-ph↗

arXiv2026

Upstream Laser-based Longitudinal Enhancement of Relativistic Photoelectrons

Controlling the longitudinal phase space of high-brightness relativistic electron beams is crucial for advancing a broad spectrum of charged-particle-based instrumentation and scientific frontiers. A generalized method for achieving this control involves manipulating the photoemission laser's temporal distribution at the picosecond level, a long-standing technical challenge. Recent developments in laser shaping have enabled the creation of high-power, picosecond-scale symmetrical and asymmetrical temporal profiles, capable of fine-tuning complex space-charge dynamics and external field effects in relativistic charged-particle beams. Here, we demonstrate that rather than deviations from theorized, idealized laser distributions, a controlled asymmetry can be harnessed to counteract accelerator-induced distortions. By implementing spatiotemporal shaping of the ultraviolet photocathode laser at the LCLS-II superconducting injector, we achieve deterministic control over the longitudinal phase space without downstream corrections. We find that this optical asymmetry induces a self-linearizing effect across both low (40 pC) and high (80 pC) charge regimes, effectively suppressing nonlinear compression and energy chirp. Consequently, this approach is expected to preserve a low emittance comparable to that of ideal flattop or regular Gaussian profiles, while delivering superior current uniformity and shot-to-shot stability. These results establish spatiotemporal laser shaping as a compact, generalizable tool for directly optimizing beam brightness at the source.

physics.optics↗

arXiv2025

Nonlinear reversal of photo-excitation on the attosecond time scale improves ultrafast x-ray diffraction images

The advent of isolated and intense sub-femtosecond X-ray pulses enables tracking of quantummechanical motion of electrons in molecules and solids. The combination of X-ray spectroscopy and diffraction imaging is a powerful approach to visualize non-equilibrium dynamics in systems beyond few atoms. However, extreme x-ray intensities introduce significant electronic damage, limiting material contrast and spatial resolution. Here we show that newly available intense subfemtosecond (sub-fs) x-ray FEL pulses can outrun most ionization cascades and partially reverse x-ray damage through stimulated x-ray emission in the vicinity of a resonance. In our experiment, we compared thousands of coherent x-ray diffraction patterns and simultaneously recorded ion spectra from individual Ne nanoparticles injected into the FEL focus. Our experimental results and theoretical modeling reveal that x-ray diffraction increases and the average charge state decreases in particles exposed to sub-fs pulses compared to those illuminated with 15-femtosecond pulses. Sub-fs exposures outrun most Auger decays and impact ionization processes, and enhance nonlinear effects such as stimulated emission, which cycle bound electrons between different states. These findings demonstrate that intense sub-fs x-ray FEL pulses are transformative for advancing high-resolution imaging and spectroscopy in chemical and material sciences, and open the possibilities of coherent control of the interaction between x-rays and complex specimen beyond few atoms.

physics.optics↗

arXiv2025

Experimental demonstration of attosecond hard X-ray pulses

We present the first direct experimental confirmation of attosecond pulse generation in the hard X-ray regime with a free-electron laser. Our experiment is based on measurements of a nonlinear optical phenomenon known as amplified spontaneous emission (ASE) from 3d transition metals. By analyzing the yield of the collective X-ray fluorescence induced by ultrashort pulses at the Linac Coherent Light Source, we identify the generation of attosecond pulses and shot-to-shot fluctuations in their duration, ranging from 100 as to 400 as. The observed product of bandwidth and pulse duration for 100 as pulses is approximately 2 fs$\cdot$eV, indicating the generation of nearly transform-limited pulses. Our results extend the photon energy reach of attosecond techniques by one order of magnitude, providing the ability to simultaneously probe matter on the time-scales of electronic phenomena and with atomic spatial resolution. Furthermore, attosecond hard X-ray pulses can outrun the fastest radiation damage processes, paving the way to single-shot damage-free X-ray measurements.

physics.optics↗

arXiv2024

"Beam `a la carte": laser heater shaping for attosecond pulses in a multiplexed x-ray free-electron laser

Electron beam shaping allows the control of the temporal properties of x-ray free-electron laser pulses from femtosecond to attosecond timescales. Here we demonstrate the use of a laser heater to shape electron bunches and enable the generation of attosecond x-ray pulses. We demonstrate that this method can be applied in a selective way, shaping a targeted subset of bunches while leaving the remaining bunches unchanged. This experiment enables the delivery of shaped x-ray pulses to multiple undulator beamlines, with pulse properties tailored to specialized scientific applications.

physics.acc-ph↗

arXiv2024

Spectrotemporal shaping of attosecond x-ray pulses with a fresh-slice free-electron laser

We propose a scheme allowing coherent shaping, i.e., controlling both the amplitude and phase, of attosecond x-ray pulses at free-electron lasers. We show that by seeding an FEL with a short coherent seed that overfills the amplification bandwidth, one can shape the Wigner function of the pulse by controlling the undulator taper profile. The examples of controllable pulse pairs and trains, as well as isolated spectrotemporally shaped pulses with very broad bandwidths are examined in detail. Existing attosecond XFELs can achieve these experimental conditions in a two-stage cascade, in which the seed is generated by a short current spike in an electron bunch and shaped in an unspoiled region within the same bunch. We experimentally demonstrate the production and control of phase-stable pulse trains using this method at the Linac Coherent Light Source II.

physics.acc-ph↗

arXiv2023

Efficient prediction of attosecond two-colour pulses from an X-ray free-electron laser with machine learning

X-ray free-electron lasers are sources of coherent, high-intensity X-rays with numerous applications in ultra-fast measurements and dynamic structural imaging. Due to the stochastic nature of the self-amplified spontaneous emission process and the difficulty in controlling injection of electrons, output pulses exhibit significant noise and limited temporal coherence. Standard measurement techniques used for characterizing two-coloured X-ray pulses are challenging, as they are either invasive or diagnostically expensive. In this work, we employ machine learning methods such as neural networks and decision trees to predict the central photon energies of pairs of attosecond fundamental and second harmonic pulses using parameters that are easily recorded at the high-repetition rate of a single shot. Using real experimental data, we apply a detailed feature analysis on the input parameters while optimizing the training time of the machine learning methods. Our predictive models are able to make predictions of central photon energy for one of the pulses without measuring the other pulse, thereby leveraging the use of the spectrometer without having to extend its detection window. We anticipate applications in X-ray spectroscopy using XFELs, such as in time-resolved X-ray absorption and photoemission spectroscopy, where improved measurement of input spectra will lead to better experimental outcomes.

physics.acc-ph↗

arXiv2023

The LCLS-II Photoinjector Laser Infrastructure

This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unprecedented brightness, precision, and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater, and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.

physics.acc-ph↗

arXiv2022

Comparison of Multiobjective Optimization Methods for the LCLS-II Photoinjector

Particle accelerators are among some of the largest science experiments in the world and can consist of thousands of components with a wide variety of input ranges. These systems can easily become unwieldy optimization problems during design and operations studies. Starting in the early 2000s, searching for better beam dynamics configurations became synonymous with heuristic optimization methods in the accelerator physics community. Genetic algorithms and particle swarm optimization are currently the most widely used. These algorithms can take thousands of simulation evaluations to find optimal solutions for one machine prototype. For large facilities such as the Linac Coherent Light Source (LCLS) and others, this equates to a limited exploration of many possible design configurations. In this paper, the LCLS-II photoinjector is optimized with three optimization algorithms. All optimizations were started from both a uniform random and Latin hypercube sample. In all cases, the optimizations started from Latin hypercube samples outperformed optimizations started from uniform samples. All three algorithms were able to optimize the photoinjector, with the model-based methods approximating the Pareto front in fewer simulation evaluations. This work, in combination with previous optimization observations, indicates objective penalties have a strong impact on the efficiency of such methods. In general, we recommend heuristic methods for initial optimizations and model-based methods when information about the objective space is available.

physics.acc-ph↗