arXiv subjects

Parisa Ramezani

Publications and source records attributed to Parisa Ramezani.

At least 19 recordsLinked to original sources

arXiv2026

Mask-Compliant Clipping-Aware Precoding for Multi-User MIMO-OFDM Systems

Orthogonal frequency-division multiplexing (OFDM) is widely adopted in frequency-selective channels for its ability to simplify equalization, yet it also causes large signal peaks, out-of-band (OOB) emissions, and spectral leakage. We study downlink precoding/combining for multi-user multiple-input multiple-output (MU-MIMO)--OFDM systems by minimizing the sum of the users' mean-squared errors (MSEs) under per-subcarrier transmit-power limits, per-antenna OOB spectral-mask constraints, and per-antenna peak-amplitude (clipping) constraints, which confine the emitted spectrum and limit waveform peaks to reduce power-amplifier saturation, nonlinear distortion, and spectral regrowth. The resulting nonconvex problem is handled by a minimum mean-squared error (MMSE) based block coordinate descent (BCD), with a closed-form combiner update and an alternating direction method of multipliers (ADMM) algorithm with closed-form updates for the precoder subproblem. Simulations show clear gains over well-known benchmark schemes.

eess.SP↗

arXiv2026

Swarm and Evolutionary Computation for Near-Field Localization

Near-field localization has attracted significant attention in recent years due to the move toward higher frequencies and extremely large aperture arrays, which expand the near-field region and bring many sources into it. This implies that antenna arrays can be used to localize not only in angle but also in range. Although a wide range of localization methods has been developed, each comes with limitations that may hinder practical deployment. This article focuses on a class of techniques that has received relatively little attention in the prior literature despite its strong potential for accurate and efficient location estimation: swarm and evolutionary computation (SEC). These methods are well-suited to the complex optimization landscape of near-field localization and can offer important advantages over conventional approaches such as grid-based subspace methods and deep learning approaches.

eess.SP↗

arXiv2026

A Primer on Evolutionary Optimization Frameworks for Near-Field Multi-Source Localization

This paper introduces evolutionary optimization as a grid-free training-free continuous-domain search mechanism for near-field multi-source localization, addressing the major limitations of grid-based subspace methods such as MUSIC and data-driven deep learning approaches. To this end, we develop two complementary evolutionary localization frameworks that operate directly on the continuous spherical-wave signal model and support arbitrary array geometries without requiring labeled data, discretized angle-range grids, or architectural constraints. The first framework, termed NEar-field MultimOdal DE (NEMO-DE) associates each individual in the evolutionary population to a single source and optimizes a residual least-squares objective in a sequential manner, updating the data residual and enforcing spatial separation to estimate multiple source locations. To overcome the limitation of NEMO-DE under large power imbalances among the sources, we propose the second framework, named NEar-field Eigen-subspace Fitting DE (NEEF-DE), which jointly encodes all source locations and minimizes a subspace-fitting criterion that aligns a model-based array response subspace with the received signal subspace. The proposed formulations are not intrinsically tied to a specific optimizer; however, this work adopts differential evolution (DE) as a representative evolutionary search strategy because of its simple implementation, small number of control parameters, and strong empirical performance in continuous nonconvex optimization problems. Numerical results show that the proposed frameworks provide competitive accuracy compared with MUSIC-type baselines while avoiding pre-defined grid construction and labeled training data. This work establishes evolutionary computation as a powerful and flexible paradigm for model-based near-field localization, paving the way for future innovations in this domain.

cs.NE↗

arXiv2026

Joint Spatial and Spectral Hybrid Precoding for Multi-User MIMO-OFDM Systems

Millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems operate over wide bandwidths and frequency-selective channels, making orthogonal frequency-division multiplexing (OFDM) a natural transmission scheme. In such systems, fully digital precoding is often impractical because the large antenna arrays require high hardware cost and power consumption, so hybrid precoding that combines digital and radio frequency (RF) processing is an attractive alternative. However, OFDM introduces high signal peaks that may cause clipping and generate out-of-band (OOB) emissions, while practical, nonideal phase shifters (PSs) at the RF precoder and user combiner suffer from phase errors. We study the problem of robust digital-RF precoding optimization for the downlink sum-rate maximization in multi-user (MU) MIMO-OFDM systems under maximum transmit power, clipping, and OOB emission mask constraints. The formulated maximization problem is nonconvex and difficult to solve. We propose a weighted minimum mean squared error (WMMSE) based block coordinate descent (BCD) method to iteratively optimize digital-RF precoders at the transmitter and digital-RF combiners at the users. Low-cost and scalable optimization approaches are proposed to efficiently solve the BCD subproblems. Extensive simulation results are conducted to demonstrate the efficiency of the proposed approaches and exhibit their superiority relative to well-known benchmarks.

eess.SP↗

arXiv2026

Symbol-Level Mask-Compliant Hybrid Precoding for Multi-User MIMO-OFDM Systems

Millimeter-wave (mmWave) technology is a crucial enabler for next-generation networks because it offers substantially greater available bandwidth. mmWave multiple-input multiple-output (MIMO) systems cannot rely solely on fully digital precoding due to hardware costs. As a result, hybrid precoding, which combines digital baseband processing with RF precoding, has emerged as a practical solution that balances performance and implementation complexity. As mmWave links typically operate over wideband, frequency-selective channels, orthogonal frequency-division multiplexing (OFDM) is commonly used to mitigate dispersive effects, yet OFDM introduces practical drawbacks, including out-of-band (OOB) emissions from abrupt spectral transitions among subcarriers and additional spectral leakage induced by windowing. Moreover, nonideal phase shifters (PS) in the RF transmit precoder and the user combiner impose inherent implementation limits that result in phase errors. We investigate robust joint digital--RF precoder design for minimizing the downlink sum mean-squared error (MSE) in hybrid multi-user (MU) MIMO--OFDM systems subject to maximum transmit-power, clipping, and OOB spectral-mask constraints. The resulting optimization is nonconvex and challenging to solve. To address this, we develop a minimum mean-squared error (MMSE) based block coordinate descent (BCD) algorithm that alternates between updating the transmitter-side digital--RF precoders and the user-side digital--RF combiners. For each BCD subproblem, we propose computationally efficient and scalable, closed-form solution strategies suitable for practical implementation. Extensive simulations validate the proposed methods and show clear performance improvements over established benchmark schemes.

eess.SP↗

arXiv2026

Joint and Streamwise Distributed MIMO Satellite Communications with Multi-Antenna Ground Users

We consider a low Earth orbit downlink communication, where multiple satellites jointly serve multi-antenna ground users, transmitting multiple spatial streams per user. Using a line-of-sight-dominant satellite channel model with statistical channel state information, including angular information and large-scale fading, we study two distributed transmission modes with different fronthaul requirements. First, for joint transmission, where all satellites transmit all user streams, we formulate a sum spectral efficiency (SE) maximization problem under general convex power constraints and address the intractability of the exact ergodic SE expression by adopting a tractable approximation. Exploiting the equivalence between sum SE maximization and weighted sum mean square error minimization, we derive a novel iterative transceiver design. Second, to reduce fronthaul load, we propose streamwise transmission, where each stream is sent by a single satellite, and develop an eigenmode-based stream-satellite association using participation factors and a maximum-weight bipartite matching problem solved by the Hungarian algorithm. Numerical simulations evaluate the validity of the SE approximation, demonstrate conditions under which streamwise transmission performs nearly optimally or trades SE for lower overhead, highlight the impact of stream/user loading, and show substantial performance gains over conventional benchmarks.

eess.SP↗

arXiv2026

Cell-Free MIMO in Space: Cooperative Satellite Transmission with Multi-Antenna Ground Users

This paper develops a multi-user downlink communication framework for distributed low Earth orbit satellite networks serving ground users equipped with multiple antennas. Building upon the concept of cell-free multiple-input multiple-output in terrestrial networks, we propose a coordinated transmission scheme where multiple satellites jointly transmit spatially multiplexed data streams to each user. Using a new approximate achievable rate expression, we formulate a sum rate maximization problem under per-satellite and per-antenna power constraints and use the classical equivalence between sum rate maximization and mean square error minimization to optimize the satellites' precoding matrices using statistical channel state information. We numerically examine the performance of the proposed scheme in different settings and validate its effectiveness by comparing it against traditional precoding designs.

eess.SP↗

arXiv2026

Maximum A Posteriori Probability Channel Tracking with an Intelligent Transmitting Surface

This paper considers an intelligent transmitting surface (ITS) integrated into a base station and develops a low-overhead maximum a posteriori (MAP) probability channel tracking method for the dominant line-of-sight link between the ITS and the user equipment. We cast the per-block channel as a three-parameter model consisting of the channel amplitude, channel phase, and angle-of-arrival at the ITS. We exploit temporal correlation by updating the priors using the estimates from the previous block. Using only two pilots per coherence block alongside a targeted beam alignment strategy, the proposed method achieves precise channel tracking and attains spectral efficiency close to that achievable under perfect channel knowledge.

eess.SP↗

arXiv2025

Precoding for Uplink RIS-Assisted Cell-Free MIMO-OFDM Systems with Hardware Impairments

This paper studies a reconfigurable intelligent surface (RIS)-assisted cell-free massive multiple-input multiple-output (CF-mMIMO) system with multiple RISs. Joint design of transmit precoding, RIS coefficients, and receive combining is investigated for uplink sum-rate maximization under in-phase and quadrature phase imbalance (IQI) at user equipments (UEs) and access points (APs). A weighted minimum mean squared error (WMMSE) based block coordinate descent (BCD) approach is proposed, where novel iterative methods are developed to efficiently solve the BCD subproblems. The efficiency of proposed approaches is demonstrated relative to heuristic methods via extensive simulations.

eess.SP↗

arXiv2025

Limited-Resolution Hybrid Analog-Digital Precoding Design Using MIMO Detection Methods

While fully-digital precoding achieves superior performance in massive MIMO systems, it comes with significant drawbacks in terms of computational complexity and power consumption, particularly when operating at millimeter-wave (mmWave) frequencies and beyond. Hybrid analog-digital architectures address this by reducing radio frequency (RF) chains while maintaining performance in sparse multipath environments. However, most hybrid precoder designs assume ideal, infinite-resolution analog phase shifters, which cannot be implemented in real systems. Another practical constraint is the limited fronthaul capacity between the baseband processor and array, implying that each entry of the digital precoder must be picked from a finite set of quantization labels. This paper proposes novel designs for the limited-resolution analog and digital precoders by exploiting two well-known MIMO symbol detection algorithms, namely sphere decoding (SD) and expectation propagation (EP). Unlike prior works that rely on heuristic or sub-optimal designs for the low-resolution hybrid precoder, the proposed transformative MIMO detection-inspired designs are able to achieve optimal and near-optimal solutions. The main objective is to minimize the Euclidean distance between the optimal fully-digital precoder and the hybrid precoder to minimize the degradation caused by the finite resolution of the analog and digital precoders. Taking an alternating optimization approach, we first apply the SD method to find the precoders in each iteration optimally. Then, we apply the lower-complexity EP method which finds a near-optimal solution at a reduced computational cost. The effectiveness of the proposed designs is validated through extensive numerical simulations, which demonstrate that both SD-based and EP-based hybrid precoding schemes significantly outperform widely-used sub-optimal approaches.

eess.SP↗

arXiv2025

Machine Learning-Based Near-Field Localization in Mixed LoS/NLoS Scenarios

The conventional MUltiple SIgnal Classification (MUSIC) algorithm is effective for angle-of-arrival estimation in the far-field and can be extended for full source localization in the near-field. However, it suffers from high computational complexity, which becomes especially prohibitive in near-field scenarios due to the need for exhaustive 3D grid searches. This paper presents a machine learning-based approach for 3D localization of near-field sources in mixed line-of-sight (LoS)/non-LoS scenarios. A convolutional neural network (CNN) learns the mapping between the eigenvectors of the received signal's covariance matrix at the anchor node and the sources' 3D locations. The detailed description of the proposed CNN model is provided. The effectiveness and time efficiency of the proposed CNN-based localization approach is corroborated via numerical simulations.

eess.SP↗

arXiv2025

A Novel Hybrid Precoder With Low-Resolution Phase Shifters and Fronthaul Capacity Limitation

In massive MIMO systems, fully digital precoding offers high performance but has significant implementation complexity and energy consumption, particularly at millimeter frequencies and beyond. Hybrid analog-digital architectures provide a practical alternative by reducing the number of radio frequency (RF) chains while retaining performance in spatially sparse multipath scenarios. However, most hybrid precoder designs assume ideal, infinite-resolution analog phase shifters, which are impractical in real-world scenarios. Another practical constraint is the limited fronthaul capacity between the baseband processor and array, implying that each entry of the digital precoder must be picked from a finite set of quantization labels. To minimize the sum rate degradation caused by quantized analog and digital precoders, we propose novel designs inspired by the sphere decoding (SD) algorithm. We demonstrate numerically that our proposed designs outperform traditional methods, ensuring minimal sum rate loss in hybrid precoding systems with low-resolution phase shifters and limited fronthaul capacity.

eess.SP↗

arXiv2025

Enabling 6G Performance in the Upper Mid-Band by Transitioning From Massive to Gigantic MIMO

The initial 6G networks will likely operate in the upper mid-band (7-24 GHz), which has decent propagation conditions but underwhelming new spectrum availability. In this paper, we explore whether we can anyway reach the ambitious 6G performance goals by evolving the multiple-input multiple-output (MIMO) technology from massive in 5G to gigantic in 6G. We describe how many antennas are needed to reach the envisioned 6G peak user rates, how many can realistically be deployed in practical radio equipment, and what the practical spatial degrees-of-freedom might become. We further suggest a new deployment strategy that enables the utilization of radiative near-field effects in these bands for precise beamfocusing, localization, and sensing from a single base station site. Finally, we identify open research and standardization challenges that must be overcome to efficiently use gigantic MIMO dimensions in 6G from hardware, cost, and algorithmic perspectives.

cs.IT↗

arXiv2024

On Broad-Beam Reflection for Dual-Polarized RIS-Assisted MIMO Systems

The use of a reconfigurable intelligent surface (RIS) for aiding user-specific transmission has been widely explored. However, little attention has been devoted to utilizing RIS for assisting cell-specific transmission, where the RIS needs to reflect signals in a broad angular range. Furthermore, although modern communication systems operate in two polarizations, the majority of the works on RIS consider a uni-polarized surface, only reflecting the signals in one polarization. To fill these gaps, we study a downlink broadcasting scenario where a base station (BS) sends a cell-specific signal to all the users residing at unknown locations with the assistance of a dual-polarized RIS. We utilize the duality between the auto-correlation function and power spectrum in the space/spatial frequency domain to design configurations for broad-beam reflection. We first consider a free-space line-of-sight BS-RIS channel and show that the RIS configuration matrices must form a Golay complementary array pair for broad-beam radiation. We also present how to form Golay complementary array pairs based on known Golay complementary sequence pairs. We then consider an arbitrary BS-RIS channel and propose an algorithm based on stochastic optimization to find RIS configurations that produce a practically broad beam by relaxing the requirement on uniform broadness. Numerical simulations are finally conducted to corroborate the analyses and evaluate the performance.

eess.SP↗

arXiv2024

Near-Field Localization and Sensing with Large-Aperture Arrays: From Signal Modeling to Processing

The signal processing community is currently witnessing a growing interest in near-field signal processing, driven by the trend towards the use of large aperture arrays with high spatial resolution in the fields of communication, localization, sensing, imaging, etc. From the perspective of localization and sensing, this trend breaks the basic far-field assumptions that have dominated the array signal processing research in the past, presenting new challenges and promising opportunities.

eess.SP↗

arXiv2024

Joint Discrete Precoding and RIS Optimization for RIS-Assisted MU-MIMO Communication Systems

This paper considers a multi-user multiple-input multiple-output (MU-MIMO) system where the downlink communication between a base station (BS) and multiple user equipments (UEs) is aided by a reconfigurable intelligent surface (RIS). We study the sum rate maximization problem with the objective of finding the optimal precoding vectors and RIS configuration. Due to fronthaul limitation, each entry of the precoding vectors must be picked from a finite set of quantization labels. Furthermore, two scenarios for the RIS are investigated, one with continuous infinite-resolution reflection coefficients and another with discrete finite-resolution reflection coefficients. A novel framework is developed which, in contrast to the common literature that only offers sub-optimal solutions for optimization of discrete variables, is able to find the optimal solution to problems involving discrete constraints. Based on the classical weighted minimum mean square error (WMMSE), we transform the original problem into an equivalent weighted sum mean square error (MSE) minimization problem and solve it iteratively. We compute the optimal precoding vectors via an efficient algorithm inspired by sphere decoding (SD). For optimizing the discrete RIS configuration, two solutions based on the SD algorithm are developed: An optimal SD-based algorithm and a low-complexity heuristic method that can efficiently obtain RIS configuration without much loss in optimality. The effectiveness of the presented algorithms is corroborated via numerical simulations where it is shown that the proposed designs are remarkably superior to the commonly used benchmarks.

eess.SP↗

arXiv2024

An Efficient Modified MUSIC Algorithm for RIS-Assisted Near-Field Localization

In this paper, we consider a single-anchor localization system assisted by a reconfigurable intelligent surface (RIS), where the objective is to localize multiple user equipments (UEs) placed in the radiative near-field region of the RIS by estimating their azimuth angle-of-arrival (AoA), elevation AoA, and distance to the surface. The three-dimensional (3D) locations can be accurately estimated via the conventional MUltiple SIgnal Classification (MUSIC) algorithm, albeit at the expense of tremendous complexity due to the 3D grid search. In this paper, capitalizing on the symmetric structure of the RIS, we propose a novel modified MUSIC algorithm that can efficiently decouple the AoA and distance estimation problems and drastically reduce the complexity compared to the standard 3D MUSIC algorithm. Additionally, we introduce a spatial smoothing method by partitioning the RIS into overlapping sub-RISs to address the rank-deficiency issue in the signal covariance matrix. We corroborate the effectiveness of the proposed algorithm via numerical simulations and show that it can achieve the same performance as 3D MUSIC but with much lower complexity.

eess.SP↗

arXiv2024

MSE Minimization in RIS-Aided MU-MIMO with Discrete Phase Shifts and Fronthaul Quantization

In this paper, we consider a downlink multi-user multiple-input multiple-output (MU-MIMO) communication assisted by a reconfigurable intelligent surface (RIS) and study the precoding and RIS configuration design under practical system constraints. These constraints include the limited-capacity fronthaul at the transmitter side and the finite resolution of RIS elements. We investigate the sum mean squared error (MSE) minimization problem and propose an algorithm based on the block coordinate descent method to optimize the precoding, RIS configuration, and receiver gains. We compute the precoding vectors and RIS configuration using the Schnorr-Euchner sphere decoding (SESD) method which delivers the optimal MSE-minimizing solution. We numerically evaluate the performance of the proposed SESD-based methods and corroborate their effectiveness in improving the system performance.

eess.SP↗