Searcharxiv⌕ Search

arXiv subjects

Patrice Genevet

Publications and source records attributed to Patrice Genevet.

30 records · Page 2Linked to original sources

Hybrid MoS$_2$-gap-mode metasurfaces photodetectors

Two-dimensional molybdenum disulfide (MoS$_2$) featuring atomically thin thickness and unique electronic structure with favorable bandgap has been widely recognized as an attractive new material for the development of the next generation of ultra-compact, light-weight optoelectronic components. In parallel, the recently emerged metasurfaces have demonstrated exceptional controllability over electromagnetic field within ultra-compact subwavelength dimension offering an unprecedented approach to improve the performance of optoelectronic devices. In this work, we are proposing an integration of metasurfaces with 2D semiconductor materials to achieve polarization sensitive, fast-response photodetectors. The reported devices are among the most compact hybrid MoS2-gap-plasmon metasurface detectors. Relying on the significant electromagnetic field confinement provided by the metasurfaces to enhance light absorption and to reduce the surface states, which generally limit the photo-generated carriers lifetime, we measured enhanced photocurrent and a fast detection speed. Moreover, the strong optical anisotropy introduced by the metasurfaces is used to efficiently control the polarization sensitivity of the photodetector. This work provides a feasible and effective solution to improve the performance of two-dimensional materials based photodetectors.

physics.app-ph↗

Freestanding dielectric nanohole array metasurface for mid-infrared wavelength applications

We designed and simulated freestanding dielectric optical metasurfaces based on arrays of etched nanoholes in a silicon membrane. We showed $2π$ phase control and high forward transmission at mid-infrared wavelengths by tuning the dimensions of the holes. We also identified the mechanisms responsible for high forward scattering efficiency and showed that these conditions are connected with the well-known Kerker conditions already proposed for isolated scatterers. A beam deflector was designed and optimized through sequential particle swarm and gradient descent optimization to maximize transmission efficiency and reduce unwanted grating orders. Such freestanding silicon nanohole array metasurfaces are promising for the realization of silicon based mid-infrared optical elements.

physics.optics↗

Anisotropic Surface Plasmon Polariton Generation Using Bimodal V-Antenna Based Metastructures

V-shaped nanoantennas are among the popular choices for the unit element of a metasurface, a nanostructured surface used for its ability to mold and control the wavefront of light. In general, the motivation for choosing the V-antenna as the unit element comes from its bimodal nature, where the introduction of the second mode offers extra control over the scattered wavefronts. Here, through near-field scanning optical microscopy, we study a 1D metastructure comprised of V-antennas in the context of generating asymmetric surface plasmon polariton (SPP) wavefronts. The key point is that the use of the V-antenna allows for the creation of a two-dimensional phase gradient with a single line of antennas, where the extra phase dimension offers additional control and allows for asymmetric features. Two different asymmetries are created: (1) SPP wavefronts that have different propagation directions on either side of the metastructure, and (2) SPP wavefront asymmetry through focusing: one side of the metastructure focuses SPP wavefronts, while the other side has diverging SPP wavefronts.

physics.optics↗

Broadband mode conversion via gradient index metamaterials

We propose a design for broadband waveguide mode conversion based on gradient index metamaterials (GIMs). Numerical simulations demonstrate that the zeroth order of transverse magnetic mode or the first order of transverse electric mode (TM0/TE1) can be converted into the first order of transverse magnetic mode or the second order of transverse electric mode (TM1/TE2) for a broadband of frequencies. As an application, an asymmetric propagation is achieved by integrating zero index metamaterials inside the GIM waveguide.

physics.optics↗

Controlling Electromagnetic Fields at Boundaries of Arbitrary Geometries

Rapid developments in the emerging field of stretchable and conformable photonics necessitate analytical expressions for boundary conditions at metasurfaces of arbitrary geometries. Here, we introduce the concept of conformal boundary optics: a design theory that determines the optical response for designer input and output fields at such interfaces. Given any object, we can realise coatings to achieve exotic effects like optical illusions and anomalous diffraction behaviour. This approach is relevant to a broad range of applications from conventional refractive optics to the design of the next-generation of wearable optical components. This concept can be generalized to other fields of research where designer interfaces with nontrivial geometries are encountered.

physics.optics↗

Multiwavelength Achromatic Metasurfaces by Dispersive Phase Compensation

The replacement of bulk refractive optical elements with diffractive planar components enables the miniaturization of optical systems. However, diffractive optics suffers from large chromatic aberrations due to the dispersion of the phase accumulated by light during propagation. We show that this limitation can be overcome with an engineered wavelength-dependent phase shift imparted by a metasurface and demonstrate a design that deflects three wavelengths without dispersion. A planar lens without chromatic aberrations at three wavelengths is also presented. Our design is based on low-loss dielectric resonators which introduce a dense spectrum of optical modes to enable dispersive phase compensation. The suppression of chromatic aberrations in metasurface-based planar photonics will find applications in lightweight collimators for displays, and chromatically-corrected imaging systems.

physics.optics↗

Quantum-Coherence-Enhanced Surface Plasmon Amplification by Stimulated Emission of Radiation

We investigate surface plasmon amplification in a silver nanoparticle coupled to an externally driven three-level gain medium, and show that quantum coherence significantly enhances the generation of surface plasmons. Surface plasmon amplification by stimulated emission of radiation is achieved in the absence of population inversion on the spasing transition, which reduces the pump requirements. The coherent drive allows us to control the dynamics, and holds promise for quantum control of nanoplasmonic devices.

quant-ph↗

Vanadium dioxide as a natural disordered metamaterial: perfect thermal emission and large broadband negative differential thermal emittance

We experimentally demonstrate that a thin (~150 nm) film of vanadium dioxide (VO2) deposited on sapphire has an anomalous thermal emittance profile when heated, which arises due to the optical interaction between the film and the substrate when the VO2 is at an intermediate state of its insulator-metal transition (IMT). Within the IMT region, the VO2 film comprises nanoscale islands of metal- and dielectric-phase, and can thus be viewed as a natural, disordered metamaterial. This structure displays "perfect" blackbody-like thermal emissivity over a narrow wavelength range (~40 cm-1), surpassing the emissivity of our black soot reference. We observed large broadband negative differential thermal emittance over a >10 °C range: upon heating, the VO2/sapphire structure emitted less thermal radiation and appeared colder on an infrared camera. We anticipate that emissivity engineering with thin film geometries comprising VO2 will find applications in infrared camouflage, thermal regulation, infrared tagging and labeling.

physics.optics↗

Generation of two-dimensional plasmonic bottle beams

By analogy to the three dimensional optical bottle beam, we introduce the plasmonic bottle beam: a two dimensional surface wave which features a lattice of plasmonic bottles, i.e. alternating regions of bright focii surrounded by low intensities. The two-dimensional bottle beam is created by the interference of a non-diffracting beam, a cosine-Gaussian beam, and a plane wave, thus giving rise to a non-diffracting complex intensity distribution. By controlling the propagation constant of the cosine-Gauss beam, the size and number of plasmonic bottles can be engineered. The two dimensional lattice of hot spots formed by this new plasmonic wave could have applications in plasmonic trapping.

physics.optics↗

Aberration-free ultra-thin flat lenses and axicons at telecom wavelengths based on plasmonic metasurfaces

The concept of optical phase discontinuities is applied to the design and demonstration of aberration-free planar lenses and axicons, comprising a phased array of ultrathin subwavelength spaced optical antennas. The lenses and axicons consist of radial distributions of V-shaped nanoantennas that generate respectively spherical wavefronts and non-diffracting Bessel beams at telecom wavelengths. Simulations are also presented to show that our aberration-free designs are applicable to high numerical aperture lenses such as flat microscope objectives.

physics.optics↗

Giant birefringence in optical antenna arrays with widely tailorable optical anisotropy

The manipulation of light by conventional optical components such as a lenses, prisms and wave plates involves engineering of the wavefront as it propagates through an optically-thick medium. A new class of ultra-flat optical components with high functionality can be designed by introducing abrupt phase shifts into the optical path, utilizing the resonant response of arrays of scatters with deeply-subwavelength thickness. As an application of this concept, we report a theoretical and experimental study of birefringent arrays of two-dimensional (V- and Y-shaped) optical antennas which support two orthogonal charge-oscillation modes and serve as broadband, anisotropic optical elements that can be used to locally tailor the amplitude, phase, and polarization of light. The degree of optical anisotropy can be designed by controlling the interference between the light scattered by the antenna modes; in particular, we observe a striking effect in which the anisotropy disappears as a result of destructive interference. These properties are captured by a simple, physical model in which the antenna modes are treated as independent, orthogonally-oriented harmonic oscillators.

physics.optics↗

Cavity Soliton Laser based on mutually coupled semiconductor microresonators

We report on experimental observation of localized structures in two mutually coupled broad-areahttp://hal.archives-ouvertes.fr/images/calendar.gif semiconductor resonators. These structures coexist with a dark homogeneous background and they have the same properties as cavity solitons without requiring the presence of a driving beam into the system. They can be switched individually on and off by means of a local addressing beam.

physics.optics↗