arXiv subjects

Patrik Schmuki

Publications and source records attributed to Patrik Schmuki.

At least 19 recordsLinked to original sources

arXiv2020

Forming a highly active, homogeneously alloyed AuPt co-catalyst decoration on O2 nanotubes directly during anodic growth

Au and Pt do not form homogeneous bulk alloys as they are thermodynamically not miscible. However, we show that anodic TiO$_2$ nanotubes (NTs) can in-situ be uniformly decorated with homogeneous AuPt alloy nanoparticles (NPs) during their anodic growth. For this, a metallic Ti substrate containing low amounts of dissolved Au (0.1 at%) and Pt (0.1 at%) is used for anodizing. The matrix metal (Ti) is converted to oxide while at the oxide/metal interface direct noble metal particle formation and alloying of Au and Pt takes place; continuously these particles are then picked up by the growing nanotube wall. In our experiments the AuPt alloy NPs have an average size of 4.2 nm and, at the end of the anodic process, are regularly dispersed over the TiO$_2$ nanotubes. These alloyed AuPt particles act as excellent co-catalyst in photocatalytic H2 generation - with a H2 production of 12.04 μL h-1 under solar light. This represents a strongly enhanced activity as compared with TiO$_2$ NTs decorated with monometallic particles of Au (7 μL h-1) or Pt (9.96 μL h-1).

physics.app-ph↗

arXiv2020

Noble-Metal-Free Photocatalytic Hydrogen Evolution Activity: The Impact of Ball Milling Anatase Nanopowders with TiH2

In this work, we demonstrate that a well-established and facile ball milling approach using mixtures of commercial anatase nanoparticles and TiH2 introduces noble-metal-free photocatalytic H2 activity to titania. We characterize this synergistic effect in view of the nature of defects, state of hydroxylation, and investigate the effect on the energetics and kinetics of electronic states and the resulting H2 evolution performance.

physics.chem-ph↗

arXiv2020

Double-Side Cocatalytic Activation of Anodic TiO$_2$ Nanotube Membranes with Sputter-Coated Pt for Photocatalytic H$_2$ Generation from Water-Ethanol Mixtures

Self-standing TiO$_2$ nanotube layers in the form of membranes are fabricated by self-organizing anodization of Ti metal and a potential shock technique. The membranes were then decorated by sputtering different Pt amounts i) only at the top, ii) only at the bottom or iii) at both top and bottom of the tube layers. The Pt-decorated membranes are transferred either in tube top up or in tube top down configuration onto FTO slides and investigated after crystallization as photocatalysts for H$_2$ generation using either front or back-side light irradiation. Double-side Pt-decoration of the tube membranes leads to higher H$_2$ generation rates (independent of tube and light irradiation configuration) compared to membranes decorated at only one side with similar overall Pt amounts. The results suggest that this effect is not ascribed to the overall amount of Pt cocatalyst as such but rather to its distribution at both tube extremities. This leads to optimized light absorption and electron diffusion/transfer dynamics: the central part of the membranes act as light harvesting zone and electrons therein generated can diffuse towards the Pt/TiO$_2$ active zones (tube extremities) where they can react with the environment and generate H$_2$ gas.

physics.app-ph↗

arXiv2020

Large diameter TiO$_2$ nanotubes enable integration of conformed hierarchical and blocking layers for enhanced dye-sensitized solar cell efficiency

In the present work we grow anodic TiO$_2$ nanotube layer with tube diameter ~ 500 nm and an open tube mouth. We use this morphology in dye-sensitized solar cells (DSSCs) and show that these tubes allow the construction of hybrid hierarchical photoanode structures of nanotubes with a defined and wall-conformance TiO2 nanoparticles decoration. At the same time, the large diameter allows the successful establishment of an additional (insulating) blocking layer of SiO$_2$ or Al$_2$O$_3$. We show that this combination of hierarchical structure and blocking layer significantly enhances the solar cell efficiency by suppressing recombination reactions. In such a DSSC structure, the solar cell efficiency under back side illumination with AM1.5 illumination is enhanced from 5% neat tube to 7 %.

physics.app-ph↗

arXiv2020

Black Magic in Gray Titania: Noble-Metal-Free Photocatalytic H2 Evolution from Hydrogenated Anatase

"Black" TiO2 has gained increasing interest because of its outstanding properties and promising applications in a wide range of fields. Among the outstanding features of the material is that certain synthesis processes lead to the formation of an intrinsic co-catalytic center and thus enable noble-metal free photocatalytic H2 generation. In this work, we report "grey TiO2" by an appropriate hydrogenation treatment exhibits excellent photocatalytic hydrogen. In this case, by the employment of thermally stable and high-surface-area TiO2 nanoparticles as well as mesoporous particles as the hydrogenation precursor, the appropriate extent of reduction of TiO2 (coloration) and the formation of Ti3+ is the key for the efficient noble-metal-free photocatalytic H2 generation. The EPR results reveal that "grey TiO2" shows stronger Ti3+ feature at g ca. 1.93 than "black TiO2" contributing to the intrinsic catalytic center for H2 evolution.

physics.chem-ph↗

arXiv2020

Enhanced Solar Water Splitting by Swift Charge Separation in Au/FeOOH Sandwiched Single Crystalline Fe$_2$O$_3$ Nanoflake Photoelectrodes

In this work, single crystalline $α$-Fe$_2$O$_3$ nanoflakes (NFs) are formed in a highly dense array by Au seeding of a Fe substrate by a thermal oxidation technique. The NFs are conformally decorated with a thin FeOOH cocatalyst layer. Photoelectrochemical (PEC) measurements show that this photoanode with the $α$-Fe$_2$O$_3$/FeOOH NFs rooted on the Au/Fe structure exhibits a significantly enhanced PEC water oxidation performance compared to the plain $α$-Fe$_2$O$_3$ nanostructure on the Fe substrate. The $α$-Fe$_2$O$_3$/FeOOH NFs on Au/Fe photoanode yields a photocurrent density of 3.1 mA cm-2 at 1.5 VRHE, and a remarkably low onset potential of 0.5-0.6 VRHE in 1 M KOH under AM 1.5G (100 mW cm-2) simulated sunlight illumination. The enhancement in PEC performance can be attributed to a synergistic effect of the FeOOH top decoration and Au under-layer. While FeOOH facilitates hole transfer at the interface of electrode/electrolyte, the Au layer provides a sink for the electron transport to the back contact: this leads overall to a drastically improved charge-separation efficiency in the single crystalline $α$-Fe$_2$O$_3$ NF photoanode.

physics.app-ph↗

arXiv2020

Highly Conducting Spaced TiO$_2$ Nanotubes Enable Defined Conformal Coating with Nanocrystalline Nb$_2$O$_5$ and High Performance Supercapacitor Applications

In this work, we report on the electrochemical behavior of nitrided spaced TiO$_2$ nanotubes conformally coated with a nanocrystalline Nb$_2$O$_5$ layer and find for these hierarchical structures an excellent supercapacitor performance. Highly aligned conductive 1D electrodes were obtained by a three step process: i) growth of self-organized nanotubes with defined and adjustable intertube spacing, ii) conformal Nb$_2$O$_5$ decoration in the tube interspace (while providing full electrolyte access to the entire active area), and iii) high temperature nitridation. Key is the growth of a nanotube array with regular tube-to-tube interspacing that enables an optimized decoration with secondary materials such as Nb$_2$O$_5$. We observe an increase in electrode capacitance from 158 $μ$F cm-2 for bare TiO$_2$ NTs, to 1536 $μ$F cm-2 for TiO$_2$/Nb$_2$O$_5$ NTs, to finally 37 mF cm-2 for Nb$_2$O$_5$ decorated and then nitrided nanotubes. This drastic increase can be ascribed firstly to the defined spacing established between the tube arrays that then allows for a conformal coating with a secondary active coating. Secondly, nitridation causes a drastic increase of the electron conductivity of the entire scaffold and thus reduces resistive losses.

physics.app-ph↗

arXiv2020

Dewetted Au nanoparticles on TiO$_2$ surfaces -- Evidence of a size-independent plasmonic photo-electrochemical response

Flat TiO$_2$ layers are deposited by magnetron sputtering on Ti/Si wafers. The TiO$_2$ surfaces are then sputter-coated with thin Au films of a nominal thickness of 0.5-10 nm that are converted by solid-state dewetting into Au nanoparticles of tuneable size and spacing; the Au nanoparticle size can be tuned over a broad range, i.e. ca. 3-200 nm. The Au-decorated TiO$_2$ surfaces enable plasmonic photo-electrochemical water splitting under visible light illumination (450-750 nm). The water splitting performance reaches a maximum for TiO$_2$ layers decorated with ~ 30 nm-sized Au particles. As expected, optical absorption measurements show a red shift of the plasmonic extinction band with increasing the Au nanoparticle size. However, the plasmonic photocurrent is found to peak at ~ 600 nm regardless of the size of the Au nanoparticles, i.e. the plasmonic photocurrent band position is size-independent. Such a remarkable observation can be ascribed to a hot electron injection cut-off effect.

physics.app-ph↗

arXiv2020

Magneli phases doped with Pt for photocatalytic hydrogen evolution

Defined substoichiometric titanium oxides (Ti$_x$O$_{2x-1}$ with $3 < x < 10$) called Magneli phases have been investigated mostly for their unusual high conductivity and metal-like behavior. In photocatalysis, Magneli phase containing titania particles have been reported to provide favorable charge separation resulting in enhanced reaction efficiency. In the current work we describe a one-step synthesis of Magneli-containing mixed phase nanoparticles that carry directly integrated minute amounts of Pt. Phase optimized nanoparticles that contain only a few hundred ppm Pt are very effective photocatalysts for H$_2$ evolution (they provide a 50-100 times higher H$_2$ evolution than plain anatase loaded with a similar amount of Pt). These photocatalysts are synthesized in a setup combining a hot-wall reactor that is used for TiOx synthesis with a spark generator producing Pt nanoparticles. Different reactor temperatures result in various phase ratios between anatase and Magneli phases. The titania nanoparticles (ca. 24 - 53 nm) were characterized using XRD, HRTEM, XPS and EPR spectra as well as ICP-OES analysis. The best photocatalyst prepared at 900$^\circ$C (which consists of mixed phase particles of 32% anatase, 11% rutile and 57% Magneli phases loaded with 290 ppm of Pt) can provide a photocatalytic H$_2$ evolution rate of ca. 5432 micromol h$^{-1} g$^{-1}$ for UV and ca. 1670 micromol h$^{-1} g$^{-1}$ for AM1.5 illumination. For powders converted to higher amounts of Magneli phases (1000$^\circ$C and 1100$^\circ$C), a drastic loss of the photocatalytic H$_2$ generation activity is observed. Thus, the high photocatalytic efficiency under best conditions is ascribed to an effective synergy between multi-junctions of Magneli titania and Pt that enable a much more effective charge separation and reaction than conventional Pt/anatase junctions.

physics.app-ph↗

arXiv2020

Intrinsically Activated SrTiO3: Photocatalytic H2 Evolution from Neutral Aqueous Methanol Solution in the Absence of Any Noble Metal Cocatalyst

Noble metal cocatalysts are conventionally a crucial factor in oxide-semiconductor-based photocatalytic hydrogen generation. In the present work, we show that optimized high-temperature hydrogenation of commercially available strontium titanate (SrTiO3) powder can be used to engineer an intrinsic cocatalytic shell around nanoparticles that can create a photocatalyst that is highly effective without the use of any additional cocatalyst for hydrogen generation from neutral aqueous methanol solutions. This intrinsic activation effect can also be observed for SrTiO3[100] single crystal as well as Nb-doped SrTiO3 (100) single crystal. For all types of SrTiO3 samples (nanopowders and either of the single crystals), hydrogenation under optimum conditions leads to a surface-hydroxylated layer together with lattice defects visible by transmission electron microscopy, electron paramagnetic resonance (EPR), and photoluminescence (PL). Active samples provide states in a defective matrix -- this is in contrast to the inactive defects formed in other reductive atmospheres. In aqueous media, active SrTiO3 samples show a significant negative shift of the flatband potential (in photoelectrochemical as well as in capacitance data) and a lower charge-transfer resistance for photoexcited electrons. We therefore ascribe the remarkable cocatalyst-free activation of the material to a synergy between thermodynamics (altered interface energetics induced by hydroxylation) and kinetics (charge transfer mediation by suitable Ti3+ states).

cond-mat.mtrl-sci↗

arXiv2020

Amorphous Mo-Ta oxide nanotubes for long-term stable Mo oxide based supercapacitors

With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aqueous electrolytes prevents a practical use in high capacitance devices. In this work, we describe how to overcome this severe stability issue by forming amorphous molybdenum oxide/tantalum oxide nanotubes by anodic oxidation of a Mo-Ta alloy. The presence of a critical amount of Ta-oxide (> 20 at-%) prevents the electrochemical decay of the MoO3 phase and thus yields an extremely high stability. Due to the protection provided by tantalum oxide, no capacitance losses are measureable after 10000 charg-ing/discharging cycles.

physics.app-ph↗

arXiv2020

Compositional gradients in sputtered Ti-Au alloys: Site-selective Au-decoration of anodic TiO$_2$ nanotubes towards enhanced photocatalytic H$_2$ evolution

Au nanoparticles at the TiO$_2$ surface can enhance the photocatalytic H$_2$ generation performances owing to their electron transfer co-catalytic ability. Key to maximize the co-catalytic effect is a fine control over Au nanoparticle size and placement on the photocatalyst, in relation to parameters such as the TiO$_2$ morphology, illumination wavelength and pathway, and light penetration depth in the photocatalyst. Here we present an approach for site-selective intrinsic-decoration of anodic TiO$_2$ nanotubes (TNs) with Au nanoparticles: we produce, by Ti and Au co-sputtering, Ti-Au alloy layers that feature compositional gradients across their thickness; these layers, when anodized under self-ordering electrochemical conditions, can form Au-decorated TNs where the Au nanoparticle density and placement vary according to the Au concentration profile in the metal alloy substrates. Our results suggest that, the Au co-catalyst placement strongly affects the photocatalytic H$_2$ evolution performance of the TNs layers. We demonstrate that, when growing Au-decorated TNs, the use of Ti-Au substrates with a suitable Au compositional gradient can lead to higher H$_2$ evolution rates compared to TNs classically grown with a homogenous co-catalyst decoration. As a side effect, a proper placement of the co-catalyst nanoparticles allows for reducing the amount of noble metal without dumping the H$_2$ evolution activity.

physics.app-ph↗

arXiv2020

Magneli-Phases in Anatase Strongly Promote Co-Catalyst-Free Photocatalytic Hydrogen Evolution

Magneli phases of titanium dioxide (such as Ti4O7, Ti5O9, etc.) provide electronic properties, namely a stable metallic behavior at room temperature. In this manuscript, we demonstrate that nanoscopic Magneli phases, formed intrinsically in anatase during a thermal aerosol synthesis, can enable significant photocatalytic H2 generation. This without the use of any extrinsic co-catalyst in anatase. Under optimized conditions, mixed phase particles of 30 percent anatase, 25 percent Ti4O7 and 20 percent Ti5O9 are obtained that can provide, under solar light, direct photocatalytic H2 evolution at a rate of 145 micromol h-1 g-1. These anatase particles contain 5-10 nm size inter-grown phases of Ti4O7 and Ti5O9. Key is the metallic band of Ti4O7 that induces a particle internal charge separation and transfer cascade with suitable energetics and favorable dimensions that are highly effective for H2 generation.

cond-mat.mtrl-sci↗

arXiv2020

Photoanodes Based on TiO$_2$ and $α$-Fe$_2$O$_3$ for Solar Water Splitting Superior Role of 1D Nanoarchitectures and of Combined Heterostructures

Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO$_2$) and iron oxide (hematite, $α$-Fe$_2$O$_3$) are among the most investigated candidates as photoanode materials, mainly owing to their resistance to photocorrosion, non-toxicity, natural abundance, and low production cost. Major drawbacks are, however, an inherently low electrical conductivity and a limited hole diffusion length that significantly affect the performance of TiO$_2$ and $α$-Fe$_2$O$_3$ in PEC devices. To this regard, one-dimensional (1D) nanostructuring is typically applied as it provides several superior features such as a significant enlargement of the material surface area, extended contact between the semiconductor and the electrolyte and, most remarkably, preferential electrical transport that overall suppress charge carrier recombination and improve TiO$_2$ and $α$-Fe$_2$O$_3$ photo-electrocatalytic properties. The present review describes various synthetic methods, properties and PEC applications of 1D-photoanodes (nanotubes, nanorods, nanofibers, nanowires) based on titania, hematite, and on $α$-Fe$_2$O$_3$/TiO$_2$ heterostructures. Various routes towards modification and enhancement of PEC activity of 1D photoanodes are also discussed including doping, decoration with co-catalysts and heterojunction engineering. Finally, the challenges related to the optimization of charge transfer kinetics in both oxides are highlighted.

physics.app-ph↗

arXiv2020

Spaced TiO$_2$ Nanotube Arrays Allow for High Performance Hierarchical Supercapacitor Structure

In this work we describe the synthesis and electrochemical properties of nitridated hierarchical TiO$_2$ nanotubes as an electrode for supercapacitors. The hierarchical TiO$_2$ nanostructures are formed by a controlled layer-by-layer TiO2 nanoparticle decoration on self-organized spaced TiO$_2$ nanotubes. These structures are then annealed in NH$_3$ atmosphere at elevated temperature to convert the material to a nitride structure -- this drastically enhances their electron-transport properties. The areal capacitance of hierarchical structures can be tuned by changing the number of decorated TiO$_2$ nanoparticle layers. The capacitance enhancement of the hierarchical structures reaches a maximum when the surface area through nanoparticle deposition is highest and the conductivity via nitridation is optimized.

physics.chem-ph↗

arXiv2020

Optimized FTO seeding enables the growth of high efficient Ta-doped TiO$_2$ nanorod photoanodes

Tantalum doped rutile nanorods were hydrothermally grown on FTO substrates using a new seeding approach. This approach allows the incorporation of high concentrations of up to 4.8 at% tantalum as active doping and results in a significant enhancement of photoelectrochemical water splitting rate (1.8 mA/cm2 at a potential of +1.5 V vs RHE) which corresponds to ca. 1% photocurrent conversion efficiency under AM 1.5, 100 mW/cm2 simulated sunlight irradiation.

physics.chem-ph↗

arXiv2020

Black and White Anatase, Rutile and Mixed Forms: Band-Edges and Photocatalytic Activity

Here we investigate the band-level energetics of "black" hydrogenated titania in different polymorphs using in-situ photoelectrochemical measurements and XPS valence band measurements. We find that the conduction band of black rutile is higher in energy than in black anatase by 0.4 eV. For photocatalytic hydrogen generation, in a polymorph hetero-junction such as in black Degussa P25, thus black rutile can act as a photosensitizer while black anatase provides charge-mediation catalysis onto H2O to generate H2. By optimizing the thermal reduction conditions of black anatase/rutile junctions the H2 production can be significantly increased.

physics.chem-ph↗

arXiv2020

Photocatalytic reduction and scavenging of Hg(II) over templated-dewetted Au on TiO$_2$ nanotubes

Gold-decorated TiO$_2$ nanotubes were used for the photocatalytic abatement of Hg(II) in aqueous solutions. The presence of dewetted Au nanoparticles induces a strong enhancement of photocatalytic reduction and scavenging performances, with respect to naked TiO$_2$. In the presence of chlorides, a massive formation of Hg2Cl2 nanowires, produced from Au nanoparticles, was observed using highly Au loaded photocatalysts to treat a 10 ppm Hg(II) solution. EDS and XPS confirmed the nature of the photo-produced nanowires. In the absence of chlorides and/or at lower Hg(II) starting concentrations, the scavenging of mercury proceeds through the formation of Hg-Au amalgams. Solar light driven Hg(II) abatements up to 90% were observed after 24h. ICP-MS analysis revealed that the removed Hg(II) is accumulated on the photocatalyst surface. Regeneration of Hg-loaded exhaust photocatalysts was easily performed by anodic stripping of Hg(0) and Hg(I) to Hg(II). After four catalytic-regeneration cycles only a 10% decrease of activity was observed.

physics.chem-ph↗