arXiv subjects

Paul C. Clark

Publications and source records attributed to Paul C. Clark.

At least 55 records · Page 3Linked to original sources

arXiv2015

Is atomic carbon a good tracer of molecular gas in metal-poor galaxies?

Carbon monoxide (CO) is widely used as a tracer of molecular hydrogen (H2) in metal-rich galaxies, but is known to become ineffective in low metallicity dwarf galaxies. Atomic carbon has been suggested as a superior tracer of H2 in these metal-poor systems, but its suitability remains unproven. To help us to assess how well atomic carbon traces H2 at low metallicity, we have performed a series of numerical simulations of turbulent molecular clouds that cover a wide range of different metallicities. Our simulations demonstrate that in star-forming clouds, the conversion factor between [CI] emission and H2 mass, $X_{\rm CI}$, scales approximately as $X_{\rm CI} \propto Z^{-1}$. We recover a similar scaling for the CO-to-H2 conversion factor, $X_{\rm CO}$, but find that at this point in the evolution of the clouds, $X_{\rm CO}$ is consistently smaller than $X_{\rm CI}$, by a factor of a few or more. We have also examined how $X_{\rm CI}$ and $X_{\rm CO}$ evolve with time. We find that $X_{\rm CI}$ does not vary strongly with time, demonstrating that atomic carbon remains a good tracer of H2 in metal-poor systems even at times significantly before the onset of star formation. On the other hand, $X_{\rm CO}$ varies very strongly with time in metal-poor clouds, showing that CO does not trace H2 well in starless clouds at low metallicity.

astro-ph.GA↗

arXiv2015

Hunting for the signatures of molecular cloud formation

In order to understand how molecular clouds form in the Galactic interstellar medium, we would like to be able to map the structure and kinematics of the gas flows responsible for forming them. However, doing so is observationally challenging. CO, the workhorse molecule for studies of molecular clouds, traces only relatively dense gas and hence only allows us to study those portions of the clouds that have already assembled. Numerical simulations suggest that the inflowing gas that forms these clouds is largely composed of CO-dark H2. These same simulations allow us to explore the usefulness of different tracers of this CO-dark molecular material, and we use them here to show that the [CII] fine structure line is potentially a very powerful tracer of this gas and should be readily detectable using modern instrumentation.

astro-ph.GA↗

arXiv2015

Synthetic observations of molecular clouds in a galactic center environment: I. Studying maps of column density and integrated intensity

We run numerical simulations of molecular clouds (MCs), adopting properties similar to those found in the Central Molecular Zone (CMZ) of the Milky Way. For this, we employ the moving mesh code Arepo and perform simulations which account for a simplified treatment of time-dependent chemistry and the non-isothermal nature of gas and dust. We perform simulations using an initial density of n_0 = 10^3 cm^{-3} and a mass of 1.3x10^5 M_sun. Furthermore, we vary the virial parameter, defined as the ratio of kinetic and potential energy, alpha = E_{kin} / |E_{pot}|, by adjusting the velocity dispersion. We set it to alpha = 0.5, 2.0 and 8.0, in order to analyze the impact of the kinetic energy on our results. We account for the extreme conditions in the CMZ and increase both the interstellar radiation field (ISRF) and the cosmic-ray flux (CRF) by a factor of 1000 compared to the values found in the solar neighbourhood. We use the radiative transfer code RADMC-3D to compute synthetic images in various diagnostic lines. These are [CII] at 158 micron, [OI] (145 micron), [OI] (63 micron), 12CO (J = 1 -> 0) and 13CO (J = 1 -> 0) at 2600 micron and 2720 micron, respectively. When alpha is large, the turbulence disperses much of the gas in the cloud, reducing its mean density and allowing the ISRF to penetrate more deeply into the cloud's interior. This significantly alters the chemical composition of the cloud, leading to the dissociation of a significant amount of the molecular gas. On the other hand, when alpha is small, the cloud remains compact, allowing more of the molecular gas to survive. We show that in each case the atomic tracers accurately reflect most of the physical properties of both the H2 and the total gas of the cloud and that they provide a useful alternative to molecular lines when studying the ISM in the CMZ.

astro-ph.GA↗

arXiv2015

Impact of supernova and cosmic-ray driving on the surface brightness of the galactic halo in soft X-rays

The halo of the Milky Way contains a hot plasma with a surface brightness in soft X-rays of the order $10^{-12}$erg cm$^{-2}$ s$^{-1}$ deg$^{-2}$. The origin of this gas is unclear, but so far numerical models of galactic star formation have failed to reproduce such a large surface brightness by several orders of magnitude. In this paper, we analyze simulations of the turbulent, magnetized, multi-phase interstellar medium including thermal feedback by supernova explosions as well as cosmic-ray feedback. We include a time-dependent chemical network, self-shielding by gas and dust, and self-gravity. Pure thermal feedback alone is sufficient to produce the observed surface brightness, although it is very sensitive to the supernova rate. Cosmic rays suppress this sensitivity and reduce the surface brightness because they drive cooler outflows. Self-gravity has by far the largest effect because it accumulates the diffuse gas in the disk in dense clumps and filaments, so that supernovae exploding in voids can eject a large amount of hot gas into the halo. This can boost the surface brightness by several orders of magnitude. Although our simulations do not reach a steady state, all simulations produce surface brightness values of the same order of magnitude as the observations, with the exact value depending sensitively on the simulation parameters. We conclude that star formation feedback alone is sufficient to explain the origin of the hot halo gas, but measurements of the surface brightness alone do not provide useful diagnostics for the study of galactic star formation.

astro-ph.GA↗

arXiv2015

Does the CO-to-H2 conversion factor depend on the star formation rate?

We present a series of numerical simulations that explore how the `X-factor', $X_{CO}$ -- the conversion factor between the observed integrated CO emission and the column density of molecular hydrogen -- varies with the environmental conditions in which a molecular cloud is placed. Our investigation is centred around two environmental conditions in particular: the cosmic ray ionisation rate (CRIR) and the strength of the interstellar radiation field (ISRF). Since both these properties of the interstellar medium have their origins in massive stars, we make the assumption in this paper that both the strength of the ISRF and the CRIR scale linearly with the local star formation rate (SFR). The cloud modelling in this study first involves running numerical simulations that capture the cloud dynamics, as well as the time-dependent chemistry, and ISM heating and cooling. These simulations are then post-processed with a line radiative transfer code to create synthetic 12CO (1-0) emission maps from which $X_{CO}$ can be calculated. We find that for 1e4 solar mass virialised clouds with mean density 100 cm$^{-3}$, $X_{CO}$ is only weakly dependent on the local SFR, varying by a factor of a few over two orders of magnitude in SFR. In contrast, we find that for similar clouds but with masses of 1e5 solar masses, the X-factor will vary by an order of magnitude over the same range in SFR, implying that extra-galactic star formation laws should be viewed with caution. However, for denser ($10^4$ cm$^{-3}$), super-virial clouds such as those found at the centre of the Milky Way, the X-factor is once again independent of the local SFR.

astro-ph.GA↗

arXiv2015

Star formation efficiencies of molecular clouds in a galactic center environment

We use the Arepo moving mesh code to simulate the evolution of molecular clouds exposed to a harsh environment similar to that found in the galactic center (GC), in an effort to understand why the star formation efficiency (SFE) of clouds in this environment is so small. Our simulations include a simplified treatment of time-dependent chemistry and account for the highly non-isothermal nature of the gas and the dust. We model clouds with a total mass of 1.3x10^5 M_{sun} and explore the effects of varying the mean cloud density and the virial parameter, alpha = E_{kin}/|E_{pot}|. We vary the latter from alpha = 0.5 to alpha = 8.0, and so many of the clouds that we simulate are gravitationally unbound. We expose our model clouds to an interstellar radiation field (ISRF) and cosmic ray flux (CRF) that are both a factor of 1000 higher than the values found in the solar neighbourhood. As a reference, we also run simulations with local solar neighbourhood values of the ISRF and the CRF in order to better constrain the effects of the extreme conditions in the GC on the SFE. Despite the harsh environment and the large turbulent velocity dispersions adopted, we find that all of the simulated clouds form stars within less than a gravitational free-fall time. Increasing the virial parameter from alpha = 0.5 to alpha = 8.0 decreases the SFE by a factor ~4-10, while increasing the ISRF/CRF by a factor of 1000 decreases the SFE again by a factor ~2-6. However, even in our most unbound clouds, the SFE remains higher than that inferred for real GC clouds. We therefore conclude that high levels of turbulence and strong external heating are not enough by themselves to lead to a persistently low SFE at the center of the Galaxy.

astro-ph.SR↗

arXiv2015

The role of 3-body H$_2$ formation in the fragmentation of primordial gas

It has been shown that the behaviour of primordial gas collapsing in a dark matter minihalo can depend on the adopted choice of 3-body H$_2$ formation rate. The uncertainties in this rate span two orders of magnitude in the current literature, and so it remains a source of uncertainty in our knowledge of population III star formation. Here we investigate how the amount of fragmentation in primordial gas depends on the adopted 3-body rate. We present the results of calculations that follow the chemical and thermal evolution of primordial gas as it collapses in two dark matter minihalos. Our results on the effect of 3-body rate on the evolution until the first protostar forms agree well with previous studies. However, our modified version of GADGET-2 SPH also includes sink particles, which allows us to follow the initial evolution of the accretion disc that builds up on the centre of each halo, and capture the fragmentation in gas as well as its dependence on the adopted 3-body H$_2$ formation rate. We find that the fragmentation behaviour of the gas is only marginally effected by the choice of 3-body rate co-efficient, and that halo-to-halo differences are of equal importance in affecting the final mass distribution of stars.

astro-ph.GA↗

arXiv2015

Modelling [CI] emission from turbulent molecular clouds

We use detailed numerical simulations of the coupled chemical, thermal and dynamical evolution of the gas in a turbulent molecular cloud to study the usefulness of the [CI] 609 micron and 370 micron fine structure emission lines as tracers of cloud structure. Emission from these lines is observed throughout molecular clouds, and yet the question of what we can learn from them about the physics of the clouds remains largely unexplored. We show that the fact that [CI] emission is widespread within molecular clouds is a simple consequence of the fact that the clouds are dominated by turbulent motions. Turbulence creates large density inhomogeneities, allowing radiation to penetrate deeply into the clouds. As a result, [CI] emitting gas is found throughout the cloud, rather than being concentrated at the edges. We examine how well we can use [CI] emission to trace the structure of the cloud, and show that the integrated intensity of the 609 micron line traces column density accurately over a wide range of visual extinctions. For extinctions greater than a few, [CI] and 13CO both perform well, but [CI] becomes a superior tracer of column densities for visual extinctions A_V <= 3 We have also studied the distribution of [CI] excitation temperatures in the gas, and show that these are typically smaller than the kinetic temperature, indicating that most of the carbon atoms are not in local thermodynamic equilibrium. We discuss how best to determine T_ex from observations of the [CI] lines, and how to use these values to estimate the column density of neutral atomic carbon. We show that even in the best case, we tend to systematically underestimate the atomic carbon content of the gas. Our results suggest that observationally-derived estimates of the atomic carbon content of real GMCs could be in error by as much as a factor of two.

astro-ph.GA↗

arXiv2014

A new approach to determine optically thick H2 cooling and its effect on primordial star formation

We present a new method for estimating the H2 cooling rate in the optically thick regime in simulations of primordial star formation. Our new approach is based on the TreeCol algorithm, which projects matter distributions onto a spherical grid to create maps of column densities for each fluid element in the computational domain. We have improved this algorithm by using the relative gas velocities, to weight the individual matter contributions with the relative spectral line overlaps, in order to properly account for the Doppler effect. We compare our new method to the widely used Sobolev approximation, which yields an estimate for the column density based on the local velocity gradient and the thermal velocity. This approach generally underestimates the photon escape probability, because it neglects the density gradient and the actual shape of the cloud. We present a correction factor for the true line overlap in the Sobolev approximation and a new method based on local quantities, which fits the exact results reasonably well during the collapse of the cloud, with the error in the cooling rates always being less than 10%. Analytical fitting formulae fail at determining the photon escape probability after formation of the first protostar (error of 40%) because they are based on the assumption of spherical symmetry and therefore break down once a protostellar accretion disc has formed. Our method yields lower temperatures and hence promotes fragmentation for densities above 10^{10}/ccm at a distance of 200AU from the first protostar. Since the overall accretion rates are hardly affected by the cooling implementation, we expect Pop III stars to have lower masses in our simulations, compared to the results of previous simulations that used the Sobolev approximation.

astro-ph.SR↗

arXiv2014

On column density thresholds and the star formation rate

We present the results of a numerical study designed to address the question of whether there is a column density threshold for star formation within molecular clouds. We have simulated a large number of different clouds, with volume and column densities spanning a wide range of different values, using a state-of-the-art model for the coupled chemical, thermal and dynamical evolution of the gas. We show that star formation is only possible in regions where the mean (area-averaged) column density exceeds $10^{21} \: {\rm cm^{-2}}$. Within the clouds, we also show that there is a good correlation between the mass of gas above a K-band extinction $A_{\rm K} = 0.8$ and the star formation rate (SFR), in agreement with recent observational work. Previously, this relationship has been explained in terms of a correlation between the SFR and the mass in dense gas. However, we find that this correlation is weaker and more time-dependent than that between the SFR and the column density. In support of previous studies, we argue that dust shielding is the key process: the true correlation is one between the SFR and the mass in cold, well-shielded gas, and the latter correlates better with the column density than the volume density.

astro-ph.GA↗

arXiv2014

The Origin and Universality of the Stellar Initial Mass Function

We review current theories for the origin of the Stellar Initial Mass Function (IMF) with particular focus on the extent to which the IMF can be considered universal across various environments. To place the issue in an observational context, we summarize the techniques used to determine the IMF for different stellar populations, the uncertainties affecting the results, and the evidence for systematic departures from universality under extreme circumstances. We next consider theories for the formation of prestellar cores by turbulent fragmentation and the possible impact of various thermal, hydrodynamic and magneto-hydrodynamic instabilities. We address the conversion of prestellar cores into stars and evaluate the roles played by different processes: competitive accretion, dynamical fragmentation, ejection and starvation, filament fragmentation and filamentary accretion flows, disk formation and fragmentation, critical scales imposed by thermodynamics, and magnetic braking. We present explanations for the characteristic shapes of the Present-Day Prestellar Core Mass Function and the IMF and consider what significance can be attached to their apparent similarity. Substantial computational advances have occurred in recent years, and we review the numerical simulations that have been performed to predict the IMF directly and discuss the influence of dynamics, time-dependent phenomena, and initial conditions.

astro-ph.SR↗

arXiv2014

Statistical properties of dark matter mini-haloes at z >= 15

Understanding the formation of the first objects in the universe critically depends on knowing whether the properties of small dark matter structures at high-redshift (z > 15) are different from their more massive lower-redshift counterparts. To clarify this point, we performed a high-resolution N-body simulation of a cosmological volume 1 Mpc/h comoving on a side, reaching the highest mass resolution to date in this regime. We make precision measurements of various physical properties that characterize dark matter haloes (such as the virial ratio, spin parameter, shape, and formation times, etc.) for the high-redshift (z > 15) dark matter mini-haloes we find in our simulation, and compare them to literature results and a moderate-resolution comparison run within a cube of side-length 100 Mpc/h. We find that dark matter haloes at high-redshift have a log-normal distribution of the dimensionless spin parameter centered around λ $\sim$ 0.03, similar to their more massive counterparts. They tend to have a small ratio of the length of the shortest axis to the longest axis (sphericity), and are highly prolate. In fact, haloes of given mass that formed recently are the least spherical, have the highest virial ratios, and have the highest spins. Interestingly, the formation times of our mini-halos depend only very weakly on mass, in contrast to more massive objects. This is expected from the slope of the linear power spectrum of density perturbations at this scale, but despite this difference, dark matter structures at high-redshift share many properties with their much more massive counterparts observed at later times.

astro-ph.CO↗

arXiv2014

CO-dark gas and molecular filaments in Milky Way type galaxies

We use the moving mesh code AREPO coupled to a time-dependent chemical network to investigate the formation and destruction of molecular gas in simulated spiral galaxies. This allows us to determine the characteristics of the gas that is not traced by CO emission. Our extremely high resolution AREPO simulations allow us to capture the chemical evolution of the disc, without recourse to a parameterised `clumping factor'. We calculate H2 and CO column densities through our simulated disc galaxies, and estimate the CO emission and CO-H2 conversion factor. We find that in conditions akin to those in the local interstellar medium, around 42% of the total molecular mass should be in CO-dark regions, in reasonable agreement with observational estimates. This fraction is almost insensitive to the CO integrated intensity threshold used to discriminate between CO-bright and CO-dark gas, as long as this threshold is less than 10 K km/s. The CO-dark molecular gas primarily resides in extremely long (>100 pc) filaments that are stretched between spiral arms by galactic shear. Only the centres of these filaments are bright in CO, suggesting that filamentary molecular clouds observed in the Milky Way may only be small parts of much larger structures. The CO-dark molecular gas mainly exists in a partially molecular phase which accounts for a significant fraction of the total disc mass budget. The dark gas fraction is higher in simulations with higher ambient UV fields or lower surface densities, implying that external galaxies with these conditions might have a greater proportion of dark gas.

astro-ph.GA↗

arXiv2014

Interpreting the sub-linear Kennicutt-Schmidt relationship: The case for diffuse molecular gas

Recent statistical analysis of two extragalactic observational surveys strongly indicate a sublinear Kennicutt-Schmidt (KS) relationship between the star formation rate (Sigsfr) and molecular gas surface density (Sigmol). Here, we consider the consequences of these results in the context of common assumptions, as well as observational support for a linear relationship between Sigsfr and the surface density of dense gas. If the CO traced gas depletion time (tau_mol) is constant, and if CO only traces star forming giant molecular clouds (GMCs), then the physical properties of each GMC must vary, such as the volume densities or star formation rates. Another possibility is that the conversion between CO luminosity and Sigmol, the XCO factor, differs from cloud-to-cloud. A more straightforward explanation is that CO permeates the hierarchical ISM, including the filaments and lower density regions within which GMCs are embedded. A number of independent observational results support this description, with the diffuse gas comprising at least 30% of the total molecular content. The CO bright diffuse gas can explain the sublinear KS relationship, and consequently leads to an increasing tau_mol with Sigmol. If Sigsfr linearly correlates with the dense gas surface density, a sublinear KS relationship indicates that the fraction of diffuse gas fdiff grows with Sigmol. In galaxies where Sigmol falls towards the outer disk, this description suggests that fdiff also decreases radially.

astro-ph.GA↗

arXiv2013

Indications of a sub-linear and non-universal Kennicutt-Schmidt relationship

We estimate the parameters of the Kennicutt-Schmidt (KS) relationship, linking the star formation rate (Sigma_SFR) to the molecular gas surface density (Sigma_mol), in the STING sample of nearby disk galaxies using a hierarchical Bayesian method. This method rigorously treats measurement uncertainties, and provides accurate parameter estimates for both individual galaxies and the entire population. Assuming standard conversion factors to estimate Sigma_SFR and Sigma_mol from the observations, we find that the KS parameters vary between galaxies, indicating that no universal relationship holds for all galaxies. The KS slope of the whole population is 0.76, with the 2sigma range extending from 0.58 to 0.94. These results imply that the molecular gas depletion time is not constant, but varies from galaxy to galaxy, and increases with the molecular gas surface density. Therefore, other galactic properties besides just Sigma_mol affect Sigma_SFR, such as the gas fraction or stellar mass. The non-universality of the KS relationship indicates that a comprehensive theory of star formation must take into account additional physical processes that may vary from galaxy to galaxy.

astro-ph.CO↗

arXiv2012

On the effects of rotation during the formation of population III protostars

It has been suggested that turbulent motions are responsible for the transport of angular momentum during the formation of Population III stars, however the exact details of this process have never been studied. We report the results from three dimensional SPH simulations of a rotating self-gravitating primordial molecular cloud, in which the initial velocity of solid-body rotation has been changed. We also examine the build-up of the discs that form in these idealized calculations.

astro-ph.GA↗

arXiv2012

Star formation in metal-poor gas clouds

Observations of molecular clouds in metal-poor environments typically find that they have much higher star formation rates than one would expect based on their observed CO luminosities and the molecular gas masses that are inferred from them. This finding can be understood if one assumes that the conversion factor between CO luminosity and H2 mass is much larger in these low metallicity systems than in nearby molecular clouds. However, it is unclear whether this is the only factor at work, or whether the star formation rate of the clouds is directly sensitive to the metallicity of the gas. To investigate this, we have performed numerical simulations of the coupled dynamical, chemical and thermal evolution of model clouds with metallicities ranging from 0.01 Z_solar to Z_solar. We find that the star formation rate in our model clouds has little sensitivity to the metallicity. Reducing the metallicity of the gas by two orders of magnitude delays the onset of star formation in the clouds by no more than a cloud free-fall time and reduces the time-averaged star formation rate by at most a factor of two. On the other hand, the chemical state of the clouds is highly sensitive to the metallicity, and at the lowest metallicities, the clouds are completely dominated by atomic gas. Our results confirm that the CO-to-H2 conversion factor in these systems depends strongly on the metallicity, but also show that the precise value is highly time-dependent, as the integrated CO luminosity of the most metal-poor clouds is dominated by emission from short-lived gravitationally collapsing regions. Finally, we find evidence that the star formation rate per unit H2 mass increases with decreasing metallicity, owing to the much smaller H2 fractions present in our low metallicity clouds.

astro-ph.GA↗

arXiv2012

Formation and evolution of primordial protostellar systems

We investigate the formation of the first stars at the end of the cosmic dark ages with a suite of three-dimensional, moving mesh simulations that directly resolve the collapse of the gas beyond the formation of the first protostar at the centre of a dark matter minihalo. The simulations cover more than 25 orders of magnitude in density and have a maximum spatial resolution of 0.05 R_sun, which extends well below the radius of individual protostars and captures their interaction with the surrounding gas. In analogy to previous studies that employed sink particles, we find that the Keplerian disc around the primary protostar fragments into a number of secondary protostars, which is facilitated by H2 collisional dissociation cooling and collision-induced emission. The further evolution of the protostellar system is characterized by strong gravitational torques that transfer angular momentum between the secondary protostars formed in the disc and the surrounding gas. This leads to the migration of about half of the secondary protostars to the centre of the cloud in a free-fall time, where they merge with the primary protostar and enhance its growth to about five times the mass of the second most massive protostar. By the same token, a fraction of the protostars obtain angular momentum from other protostars via N-body interactions and migrate to higher orbits. On average, only every third protostar survives until the end of the simulation. However, the number of protostars present at any given time increases monotonically, suggesting that the system will continue to grow beyond the limited period of time simulated here.

astro-ph.CO↗