arXiv subjects

Paul Noël

Publications and source records attributed to Paul Noël.

18 recordsLinked to original sources

arXiv2026

Direct Observation of Antimagnons with Inverted Dispersion

We report direct spectroscopic evidence of antimagnons, i.e., negative-energy spin waves identified by their signature inverted dispersion and left-handed precession with Brillouin light scattering (BLS) spectroscopy. We investigate an ultrathin BiYIG film with a perpendicular magnetized anisotropy that compensates the demagnetizing field. By injecting a spin-orbit torque, the magnetization is driven into auto-oscillation and eventually into a non-equilibrium reversed state above a secondary current threshold ($\sim$1.2$\times$10$^7$~A/cm$^2$). The dispersion is measured by wavevector-resolved BLS and exhibits a sharp change from an upward dispersion to a downward one, in agreement with theoretical predictions and micromagnetic simulations. Around the threshold current, we observe the coexistence of conventional magnons and antimagnons. Our work establishes antimagnons with inverted dispersion and is a first step towards exploring novel phenomena and applications due to magnon-antimagnon coupling, such as magnon amplification and magnon-antimagnon entanglement, which are part of the emerging field of antimagnonics.

cond-mat.mes-hall↗

arXiv2026

Charge-to-spin conversion in epitaxial and polycrystalline Bi and Bi/Ag layers

Bi is predicted to be an efficient generator of spin-orbit torques (SOTs), with charge-to-spin conversion efficiency comparable to those of prototypical heavy metals, such as Ta, W, and Pt. However, experimental reports provide widely scattered interconversion efficiencies, while the origin of the large conversion signal in Bi/Ag bilayers remains controversial. Here, we investigate charge-to-spin conversion in epitaxial and polycrystalline Bi-based magnetic heterostructures by measuring the damping-like SOT using magneto-optic Kerr effect magnetometry, complemented by structural and spectroscopic analyses and harmonic Hall resistance measurements. We show that inserting an Ag spacer between Bi(001) and metallic ferromagnets (FeCo or Ni) enhances the SOT efficiency by more than one order of magnitude, reaching an effective spin Hall conductivity of approximately $2 \times 10^5 (\hbar/2e)$ S/m, in excellent agreement with theoretical expectations for bulk Bi. This enhancement can be consistently explained by the preservation of the structural and chemical integrity of Bi, otherwise compromised by the direct deposition of a ferromagnetic overlayer, rather than by Rashba spin-orbit coupling at the Bi/Ag interface. Comparative studies across epitaxial, polycrystalline, and intentionally surface-oxidized Bi films, beyond oxygen doses known to destroy Bi(001) surface states, reveal that structural disorder has a negative impact on the SOT efficiency and indicate a dominant bulk contribution to spin-current generation in Bi/Ag heterostructures, yielding an effective Bi spin Hall angle of approximately 1. By establishing a direct correlation between atomic-scale integrity and charge-to-spin conversion, this study provides design principles to improve the reliability of Bi-based SOT devices and offers a robust framework for interpreting spin-charge interconversion in Bi and Bi/Ag systems.

cond-mat.mtrl-sci↗

arXiv2024

Estimation of spin-orbit torques in the presence of current-induced magnon creation and annihilation

We present a comprehensive set of harmonic resistance measurements of the dampinglike (DL) and fieldlike (FL) torques in Pt/CoFeB, Pt/Co, W/CoFeB, W/Co, and YIG/Pt bilayers complemented by measurements of the DL torque using the magneto-optical Kerr effect and calibrated by nitrogen vacancy magnetometry on the same devices. The magnon creation-annihilation magnetoresistances depend strongly on temperature and on the magnetic and transport properties of each bilayer, affecting the estimate of both the DL and FL torque. The DL torque, the most important parameter for applications, is overestimated by a factor of 2 in W/CoFeB and by one order of magnitude in YIG/Pt when not accounting for the magnonic contribution to the planar Hall resistance. We further show that the magnonic contribution can be quantified by combining measurements of the nonlinear longitudinal and transverse magnetoresistances, thus providing a reliable method to measure the spin-orbit torques in different material systems.

cond-mat.mes-hall↗

arXiv2024

Nonlinear longitudinal and transverse magnetoresistances due to current-induced magnon creation-annihilation processes

Charge-spin conversion phenomena such as the spin Hall effect allow for the excitation of magnons in a magnetic layer by passing an electric current in an adjacent nonmagnetic conductor. We demonstrate that this current-induced modification of the magnon density generates an additional nonlinear longitudinal and transverse magnetoresistance for every magnetoresistance that depends on the magnetization. Using harmonic measurements, we evidence that these magnon creation-annihilation magnetoresistances dominate the second harmonic longitudinal and transverse resistance of thin Y$_{3}$Fe$_{5}$O$_{12}$/Pt bilayers. Our results apply to both insulating and metallic magnetic layers, elucidating the dependence of the magnetoresistance on applied current and magnetic field for a broad variety of systems excited by spin currents.

cond-mat.mes-hall↗

arXiv2024

Mitigation of Gilbert Damping in the CoFe/CuOx Orbital Torque System

Charge-spin interconversion processes underpin the generation of spin-orbit torques in magnetic/nonmagnetic bilayers. However, efficient sources of spin currents such as 5d metals are also efficient spin sinks, resulting in a large increase of magnetic damping. Here we show that a partially-oxidized 3d metal can generate a strong orbital torque without a significant increase in damping. Measurements of the torque efficiency ξ and Gilbert damping α in CoFe/CuOx and CoFe/Pt indicate that ξ is comparable. The increase in damping relative to a single CoFe layer is Δα<0.002 in CoFe/CuOx and Δα ~ 0.005 - 0.02 in CoFe/Pt, depending on CoFe thickness. We ascribe the nonreciprocal relationship between Δα and ξ in CoFe/CuOx to the small orbital-to-spin current ratio generated by magnetic resonance in CoFe and the lack of an efficient spin sink in CuOx. Our findings provide new perspectives on the efficient excitation of magnetization dynamics via the orbital torque.

cond-mat.mtrl-sci↗

arXiv2023

Spin-orbit torques and magnetization switching in Gd/Fe multilayers generated by current injection in NiCu alloys

Light transition metals have recently emerged as a sustainable material class for efficient spin-charge interconversion. We report measurements of current-induced spin-orbit torques generated by Ni$_{1-x}$Cu$_{x}$ alloys in perpendicularly magnetized ferrimagnetic Gd/Fe multilayers. We show that the spin-orbit torque efficiency of Ni$_{1-x}$Cu$_{x}$ increases with the Ni/Cu atomic ratio, reaching values comparable to those of Pt for Ni$_{55}$Cu$_{45}$. Furthermore, we demonstrate magnetization switching of a 20-nm-thick Gd/Fe multilayer with a threshold current that decreases with increasing Ni concentration, similar to the spin-orbit torque efficiency. Our findings show that Ni$_{1-x}$Cu$_{x}$$-$based magnetic heterostructures allow for efficient control of the magnetization by electric currents.

cond-mat.mtrl-sci↗

arXiv2023

Spin-orbit torques and spin Hall magnetoresistance generated by twin-free and amorphous Bi0.9Sb0.1 topological insulator films

Topological insulators have attracted great interest as generators of spin-orbit torques (SOTs) in spintronic devices. Bi\textsubscript{1-x}Sb\textsubscript{x} is a prominent topological insulator that has a high charge-to-spin conversion efficiency. However, the origin and magnitude of the SOTs induced by current-injection in Bi\textsubscript{1-x}Sb\textsubscript{x} remain controversial. Here we report the investigation of the SOTs and spin Hall magnetoresistance resulting from charge-to-spin conversion in twin-free epitaxial layers of Bi\textsubscript{0.9}Sb\textsubscript{0.1}(0001) coupled to FeCo, and compare it with that of amorphous Bi\textsubscript{0.9}Sb\textsubscript{0.1}. We find a large charge-to-spin conversion efficiency of 1 in the first case and less than 0.1 in the second, confirming crystalline Bi\textsubscript{0.9}Sb\textsubscript{0.1} as a strong spin injector material. The SOTs and spin Hall magnetoresistance are independent of the direction of the electric current, indicating that charge-to-spin conversion in single-crystal Bi\textsubscript{0.9}Sb\textsubscript{0.1}(0001) is isotropic despite the strong anisotropy of the topological surface states. Further, we find that the damping-like SOT has a non-monotonic temperature dependence with a minimum at 20~K. By correlating the SOT with resistivity and weak antilocalization measurements, we conclude that charge-spin conversion occurs via thermally-excited holes from the bulk states above 20~K, and conduction through the isotropic surface states with increasing spin polarization due to decreasing electron-electron scattering below 20~K.

cond-mat.mtrl-sci↗

arXiv2022

Unidirectional orbital magnetoresistance in light metal/ferromagnet bilayers

We report the observation of a unidirectional magnetoresistance (UMR) that originates from the nonequilibrium orbital momentum induced by an electric current in a naturally oxidized Cu/Co bilayer. The orbital-UMR scales with the torque efficiency due to the orbital Rashba-Edelstein effect upon changing the Co thickness and temperature, reflecting their common origin. We attribute the UMR to orbital-dependent electron scattering and orbital-to-spin conversion in the ferromagnetic layer. In contrast to the spin-current induced UMR, the magnon contribution to the orbital-UMR is absent in thin Co layers, which we ascribe to the lack of coupling between low energy magnons and orbital current. The magnon contribution to the UMR emerges in Co layers thicker than about 5 nm, which is comparable to the orbital-to-spin conversion length. Our results provide insight into orbital-to-spin momentum transfer processes relevant for the optimization of spintronic devices based on light metals and orbital transport.

cond-mat.mtrl-sci↗

arXiv2022

Non-volatile electric control of spin-orbit torques in an oxide two-dimensional electron gas

Spin-orbit torques (SOTs) have opened a novel way to manipulate the magnetization using in-plane current, with a great potential for the development of fast and low power information technologies. It has been recently shown that two-dimensional electron gases (2DEGs) appearing at oxide interfaces provide a highly efficient spin-to-charge current interconversion. The ability to manipulate 2DEGs using gate voltages could offer a degree of freedom lacking in the classical ferromagnetic/spin Hall effect bilayers for spin-orbitronics, in which the sign and amplitude of SOTs at a given current are fixed by the stack structure. Here, we report the non-volatile electric-field control of SOTs in an oxide-based Rashba-Edelstein 2DEG. We demonstrate that the 2DEG is controlled using a back-gate electric-field, providing two remanent and switchable states, with a large resistance contrast of 1064%. The SOTs can then be controlled electrically in a non-volatile way, both in amplitude and in sign. This achievement in a 2DEG-CoFeB/MgO heterostructures with large perpendicular magnetization further validates the compatibility of oxide 2DEGs for magnetic tunnel junction integration, paving the way to the advent of electrically reconfigurable SOT MRAMS circuits, SOT oscillators, skyrmion and domain-wall-based devices, and magnonic circuits.

cond-mat.mtrl-sci↗

arXiv2021

Spin-charge interconversion in KTaO$_3$ two-dimensional electron gases

Oxide interfaces exhibit a broad range of physical effects stemming from broken inversion symmetry. In particular, they can display non-reciprocal phenomena when time reversal symmetry is also broken, e.g., by the application of a magnetic field. Examples include the direct and inverse Edelstein effects (DEE, IEE) that allow the interconversion between spin currents and charge currents. The DEE and IEE have been investigated in interfaces based on the perovskite SrTiO$_3$ (STO), albeit in separate studies focusing on one or the other. The demonstration of these effects remains mostly elusive in other oxide interface systems despite their blossoming in the last decade. Here, we report the observation of both the DEE and IEE in a new interfacial two-dimensional electron gas (2DEG) based on the perovskite oxide KTaO$_3$. We generate 2DEGs by the simple deposition of Al metal onto KTaO$_3$ single crystals, characterize them by angle-resolved photoemission spectroscopy and magnetotransport, and demonstrate the DEE through unidirectional magnetoresistance and the IEE by spin-pumping experiments. We compare the spin-charge interconversion efficiency with that of STO-based interfaces, relate it to the 2DEG electronic structure, and give perspectives for the implementation of KTaO$_3$ 2DEGs into spin-orbitronic devices.

cond-mat.mes-hall↗

arXiv2021

Spin-orbit torques and magnetotransport properties of $α$-Sn and $β$-Sn heterostructures

Topological insulators have emerged as an important material class for efficient spin-charge interconversion. Most topological insulators considered to date are binary or ternary compounds, with the exception of $α$-Sn. Here we report a comprehensive characterization of the growth, magnetotransport properties, and current-induced spin-orbit torques of $α$-Sn and $β$-Sn-based ferromagnetic heterostructures. We show that $α$-Sn grown with a Bi surfactant on CdTe(001) promotes large spin-orbit torques in a ferromagnetic FeCo layer at room temperature, comparable to Pt, whereas $α$-Sn grown without Bi surfactant and the non-topological phase, $β$-Sn, induce lower torques. The dampinglike and fieldlike spin-orbit torque efficiency in $α$-Sn with Bi are 0.12 and 0.18, respectively. Further, we show that $α$-Sn grown with and without Bi presents a spin Hall-like magnetoresistance comparable to that found in heavy metal/ferromagnet bilayers. Our work demonstrates direct and efficient charge-to-spin conversion in $α$-Sn ferromagnetic heterostructures, showing that $α$-Sn is a promising material for current-induced magnetization control in spintronic devices.

cond-mat.mes-hall↗

arXiv2021

Oxide spin-orbitronics: spin-charge interconversion and topological spin textures

Quantum oxide materials possess a vast range of properties stemming from the interplay between the lattice, charge, spin and orbital degrees of freedom, in which electron correlations often play an important role. Historically, the spin-orbit coupling was rarely a dominant energy scale in oxides. It however recently came to the forefront, unleashing various exotic phenomena connected with real and reciprocal-space topology that may be harnessed in spintronics. In this article, we review the recent advances in the new field of oxide spin-orbitronics with a special focus on spin-charge interconversion from the direct and inverse spin Hall and Edelstein effects, and on the generation and observation of topological spin textures such as skyrmions. We highlight the control of spin-orbit-driven effects by ferroelectricity and give perspectives for the field.

cond-mat.mtrl-sci↗

arXiv2021

Room-temperature ferroelectric switching of spin-to-charge conversion in GeTe

Since its birth in the 1990s, semiconductor spintronics has suffered from poor compatibility with ferromagnets as sources of spin. While the broken inversion symmetry of some semiconductors may alternatively allow for spin-charge interconversion, its control by electric fields is volatile. Ferroelectric Rashba semiconductors stand as appealing materials unifying semiconductivity, large spin-orbit coupling, and non-volatility endowed by ferroelectricity. However, their potential for spintronics has been little explored. Here, we demonstrate the non-volatile, ferroelectric control of spin-to-charge conversion at room temperature in epitaxial GeTe films. We show that ferroelectric switching by electrical gating is possible in GeTe despite its high carrier density. We reveal a spin-to-charge conversion as effective as in Pt, but whose sign is controlled by the orientation of the ferroelectric polarization. The comparison between theoretical and experimental data suggests that spin Hall effect plays a major role for switchable conversion. These results open a route towards devices combining spin-based logic and memory integrated into a silicon-compatible material.

cond-mat.mtrl-sci↗

arXiv2021

Metal/SrTiO$_3$ two-dimensional electron gases for spin-to-charge conversion

SrTiO$_3$-based two-dimensional electron gases (2DEGs) can be formed through the deposition of epitaxial oxides like LaAlO$_3$ or of reactive metals such as Al. Such 2DEGs possess a finite Rashba spin-orbit coupling that has recently been harnessed to interconvert charge and spin currents through the direct and inverse Edelstein and spin Hall effects. Here we compare the formation and properties of 2DEGs generated in SrTiO$_3$ by the growth of Al, Ta and Y ultrathin films by magnetron sputtering. By combining in situ and ex situ X-ray photoelectron spectroscopy (XPS) we gain insight into the reduction of the SrTiO$_3$ and the appearance of Ti$^{3+}$ states associated with 2DEG formation, its reoxidation by exposure to the air, and the transformation of the metal into its binary oxides. We extract the carrier densities through magnetotransport and compare them with the XPS data. Finally, working with samples covered by an extra layer of NiFe, we perform spin-pumping ferromagnetic resonance experiments and investigate spin-charge conversion as a function of gate voltage. We identify trends in the data across the different sample systems and discuss them as a function of the carrier density and the transparency of the metal oxide tunnel barrier.

cond-mat.mes-hall↗

arXiv2020

Enhancement of YIG$|$Pt spin conductance by local Joule annealing

We report that Joule heating can be used to enhance the interfacial spin conductivity between a metal and an oxide. We observe that local annealing of the interface at about 550\,K by injecting large current densities ($>10^{12}\text{A/m}^{2}$) into a pristine 7\,nm thick Pt nanostrip evaporated on top of yttrium iron garnet (YIG), can improve the spin transmission up to a factor 3: a result of particular interest for interfacing ultra thin garnet films where strong chemical etching of the surface has to be avoided. The effect is confirmed by different methods: spin Hall magnetoresistance, spin pumping and non-local spin transport. We use it to study the influence of the YIG$|$Pt coupling on the non-linear spin transport properties. We find that the cross-over current from a linear to a non-linear spin transport regime is independent of this coupling, suggesting that the behavior of pure spin currents circulating in the dielectric are mostly governed by the physical properties of the bare YIG film beside the Pt nanostrip.

cond-mat.mtrl-sci↗

arXiv2020

A switchable two-dimensional electron gas based on ferroelectric Ca:SrTiO$_3$

Two-dimensional electron gases (2DEGs) can form at the surface of oxides and semiconductors or in carefully designed quantum wells and interfaces. Depending on the shape of the confining potential, 2DEGs may experience a finite electric field, which gives rise to relativistic effects such as the Rashba spin-orbit coupling. Although the amplitude of this electric field can be modulated by an external gate voltage, which in turn tunes the 2DEG carrier density, sheet resistance and other related properties, this modulation is volatile. Here, we report the design of a ''ferroelectric'' 2DEG whose transport properties can be electrostatically switched in a non-volatile way. We generate a 2DEG by depositing a thin Al layer onto a SrTiO$_3$ single crystal in which 1 percent of Sr is substituted by Ca to make it ferroelectric. Signatures of the ferroelectric phase transition at 25 K are visible in the Raman response and in the temperature dependences of the carrier density and sheet resistance that shows a hysteretic dependence on electric field as a consequence of ferroelectricity. We suggest that this behavior may be extended to other oxide 2DEGs, leading to novel types of ferromagnet-free spintronic architectures.

cond-mat.mtrl-sci↗

arXiv2020

Independence of the inverse spin Hall effect with the magnetic phase in thin NiCu films

Large spin Hall angles have been observed in 3d ferromagnets, but their origin, and especially their link with the ferromagnetic order, remain unclear. Here, we investigate the inverse spin Hall effect of Ni60Cu40 and Ni50Cu50 across their Curie temperature using spin pumping experiments. We evidence that the inverse spin Hall effect in these samples is comparable to that of platinum, and that it is insensitive to the magnetic order. These results points towards a Heisenberg localized model of the transition, and suggest that the large spin Hall effects in 3d ferromagnets can be independent of the magnetic phase.

cond-mat.mtrl-sci↗

arXiv2020

Negligible thermal contributions to the spin pumping signal in ferromagnetic metal-Platinum bilayers

Spin pumping by ferromagnetic resonance is one of the most common technique to determine spin hall angles, Edelstein lengths or spin diffusion lengths of a large variety of materials. In recent years, rising concerns have appeared regarding the interpretation of these experiments, underlining that the signal could arise purely from thermoelectric effects, rather than from coherent spin pumping. Here, we propose a method to evaluate the presence or absence of thermal effects in spin pumping signals, by combining bolometry and spin pumping by ferromagnetic resonance measurements, and comparing their timescale. Using a cavity to perform the experiments on Pt\Permalloy and La0.7Sr0.3MnO3\Pt samples, we conclude on the absence of any measurable thermoelectric contribution such as the spin Seebeck and anomalous Nernst effects at resonance

cond-mat.mtrl-sci↗