arXiv subjects

Paul Richards

Publications and source records attributed to Paul Richards.

6 recordsLinked to original sources

arXiv2022

Daytime calibration and testing of the Keck All sky Precision Adaptive Optics Tomography System

The development of the Keck All sky Precision Adaptive optics (KAPA) project was initiated in September 2018 to upgrade the Keck I adaptive optics (AO) system to enable laser tomography adaptive optics (LTAO) with a four laser guide star (LGS) asterism. The project includes the replacement of the existing LMCT laser with a Toptica laser, the implementation of a new real-time controller (RTC) and wavefront sensor optics and camera, and a new daytime calibration and test platform to provide the required infrastructure for laser tomography. The work presented here describes the new daytime calibration infrastructure to test the performance for the KAPA tomographic algorithms. This paper outlines the hardware infrastructure for daytime calibration and performance assessment of tomographic algorithms. This includes the implementation of an asterism simulator having fiber-coupled light sources simulating four Laser Guide Stars (LGS) and two Natural Guide Stars (NGS) at the AO bench focus, as well as the upgrade of the existing TelSim on the AO bench to simulate focal anisoplanatism and wind driven atmospheric turbulence. A phase screen, that can be adjusted in effective altitude, is used to simulate wind speeds up to 10 m/s for a duration of upto 3 s.

astro-ph.IM↗

arXiv2020

The POLARBEAR Fourier Transform Spectrometer Calibrator and Spectroscopic Characterization of the POLARBEAR Instrument

We describe the Fourier Transform Spectrometer (FTS) used for in-field testing of the POLARBEAR receiver, an experiment located in the Atacama Desert of Chile which measures the cosmic microwave background (CMB) polarization. The POLARBEAR-FTS (PB-FTS) is a Martin-Puplett interferometer designed to couple to the Huan Tran Telescope (HTT) on which the POLARBEAR receiver is installed. The PB-FTS measured the spectral response of the POLARBEAR receiver with signal-to-noise ratio (SNR) $>20$ for $\sim$69% of the focal plane detectors due to three features: a high throughput of 15.1 steradian cm$^{2}$, optimized optical coupling to the POLARBEAR optics using a custom designed output parabolic mirror, and a continuously modulated output polarizer. The PB-FTS parabolic mirror is designed to mimic the shape of the 2.5 m-diameter HTT primary reflector which allows for optimum optical coupling to the POLARBEAR receiver, reducing aberrations and systematics. One polarizing grid is placed at the output of the PB-FTS, and modulated via continuous rotation. This modulation allows for decomposition of the signal into different harmonics that can be used to probe potentially pernicious sources of systematic error in a polarization-sensitive instrument. The high throughput and continuous output polarizer modulation features are unique compared to other FTS calibrators used in the CMB field. In-field characterization of the POLARBEAR receiver was accomplished using the PB-FTS in April 2014. We discuss the design, construction, and operation of the PB-FTS and present the spectral characterization of the POLARBEAR receiver. We introduce future applications for the PB-FTS in the next-generation CMB experiment, the Simons Array.

astro-ph.IM↗

arXiv2013

A Dual-polarized Broadband Planar Antenna and Channelizing Filter Bank for Millimeter Wavelengths

We describe the design, fabrication, and testing of a broadband log-periodic antenna coupled to multiple cryogenic bolometers. This detector architecture, optimized here for astrophysical observations, simultaneously receives two linear polarizations with two octaves of bandwidth at millimeter wavelengths. The broad bandwidth signal received by the antenna is divided into sub-bands with integrated in-line frequency-selective filters. We demonstrate two such filter banks: a diplexer with two sub-bands and a log-periodic channelizer with seven contiguous sub-bands. These detectors have receiver efficiencies of 20-40% and percent level polarization isolation. Superconducting transition-edge sensor bolometers detect the power in each sub-band and polarization. We demonstrate circularly symmetric beam patterns, high polarization isolation, accurately positioned bands, and high optical efficiency. The pixel design is applicable to astronomical observations of intensity and polarization at millimeter through sub-millimeter wavelengths. As compared with an imaging array of pixels measuring only one band, simultaneous measurements of multiple bands in each pixel has the potential to result in a higher signal-to-noise measurement while also providing spectral information. This development facilitates compact systems with high mapping speeds for observations that require information in multiple frequency bands.

astro-ph.IM↗

arXiv2012

Multi-chroic dual-polarization bolometric detectors for studies of the Cosmic Microwave Background

We are developing multi-chroic antenna-coupled TES detectors for CMB polarimetry. Multi-chroic detectors increase the mapping speed per focal plane area and provide greater discrimination of polarized galactic foregrounds with no increase in weight or cryogenic cost. In each pixel, a silicon lens-coupled dual polarized sinuous antenna collects light over a two-octave frequency band. The antenna couples the broadband millimeter wave signal into microstrip transmission lines, and on-chip filter banks split the broadband signal into several frequency bands. Separate TES bolometers detect the power in each frequency band and linear polarization. We will describe the design and performance of these devices and present optical data taken with prototype pixels. Our measurements show beams with percent level ellipticity, percent level cross-polarization leakage, and partitioned bands using banks of 2, 3, and 7 filters. We will also describe the development of broadband anti-reflection coatings for the high dielectric constant lens. The broadband anti-reflection coating has approximately 100 percent bandwidth and no detectable loss at cryogenic temperature. Finally, we will describe an upgrade for the POLARBEAR CMB experiment and installation for the LITEBird CMB satellite experiment both of which have focal planes with kilo-pixel of these detectors to achieve unprecedented mapping speed.

astro-ph.IM↗

arXiv2009

Study of the Experimental Probe of Inflationary Cosmology (EPIC)-Intemediate Mission for NASA's Einstein Inflation Probe

Measurements of Cosmic Microwave Background (CMB) anisotropy have served as the best experimental probe of the early universe to date. The inflationary paradigm, inspired in part by the extreme isotropy of the CMB, is now a cornerstone in modern cosmology. Inflation has passed a series of rigorous experimental tests, but we still do not understand the physical mechanism or energy scale behind inflation. A general prediction of inflation and one that can provide certain insights into inflationary physics is a background of primordial gravitational waves. These perturbations leave a distinct signature in the CMB B-modes of polarization. The EPIC (Experimental Probe of Inflationary Cosmology) study team has investigated several CMB polarization mission concepts to carry out a definitive measurement of the inflationary B-mode polarization spectrum. In this report we study a mission with an aperture intermediate between the two missions discussed in our previous report. EPIC-IM's increased aperture allows access to a broader science case than the small EPIC-Low Cost mission. In addition to the search for inflationary gravitational waves, the increase aperture allows us to mine the scale polarization and lensing shear polarization signals down to cosmological limits, so that we extract virtually all the cosmological information available from the CMB. In addition, a modest number of channels operating at higher frequencies allows for an all-sky measurement of polarized Galactic dust, which will provide a rich dataset for Galactic science related to magnetic fields. Using a combination of a large sensitivity focal plane with a new optical design, and an efficient 4K mechanical cooler, EPIC-IM realizes higher sensitivity than EPIC-Comprehensive Science mission.

astro-ph.CO↗

arXiv2003

Recent Results from the MAXIMA Experiment

MAXIMA is a balloon-borne platform for measuring the anisotropy of the Cosmic Microwave Background (CMB). It has measured the CMB power spectrum with a ten-arcminute FWHM beam, corresponding to a detection of the power spectrum out to spherical harmonic multipole l~1000. The spectrum is consistent with a flat Universe with a nearly scale-invariant initial spectrum of adiabatic density fluctuations. Moreover, the MAXIMA data are free from any notable non-Gaussian contamination and from foreground dust emission. In the same region, the WMAP experiment observes the same structure as that observed by MAXIMA, as evinced by analysis of both maps and power spectra. The next step in the evolution of the MAXIMA program is MAXIPOL, which will observe the polarization of the CMB with comparable resolution and high sensitivity over a small patch of the sky.

astro-ph↗