arXiv subjects

Paulo J. V. Garcia

Publications and source records attributed to Paulo J. V. Garcia.

15 recordsLinked to original sources

arXiv2026

Probing departures from Schwarzschild geometry with the S301 star and kilometre-baseline interferometry

The S301 star reaches a pericentre one tenth that of S2, opening a new regime for probing black-hole spin and departures from Schwarzschild. We develop a post-Newtonian secular Hamiltonian framework for bound geodesics in stationary, axisymmetric spacetimes and compute the maximum projected astrometric deviation over one orbit. At the expected GRAVITY+ precision, S301 can probe several nonrotating geometries and sizeable spin-induced deviations, while kilometre-baseline interferometry can probe much smaller departures, establishing S301 as a powerful test of the spacetime geometry of Sgr A*.

astro-ph.GA↗

arXiv2026

A solution to the paradox of youth in the Galactic centre

The supermassive black hole at the Galactic centre, Sgr A*, is surrounded by an S cluster of young stars. These stars are predominantly B-type stars, but their origin remains uncertain. Unlike massive stars in the Galactic field, which exhibit a binary fraction of about $70\%$, those in the S cluster show a significantly lower fraction. It is key to understand this discrepancy for constraining their formation. We show that the binary deficit arises naturally from dynamical interactions between stellar binaries and Sgr A* in an in situ formation scenario. Using K-amplitude data, we derived an observational binary fraction of $f_{\mathrm{obs}} = 0.43 \pm 0.09$ for the S-cluster stars. Our dynamical modelling predicts that interactions with Sgr A* cause $18\%$ of the binaries to merge, $20\%$ to be disrupted, and $62\%$ to survive, yielding a theoretical binary fraction of $f_{\mathrm{theo}} = 0.38 \pm 0.10$. The predicted binary fraction with distance from Sgr A* is also consistent with independent observational constraints. These results show that the decline in binarity towards the Galactic centre is driven by stronger tidal forces, and they support an in situ origin of the S cluster in the same event that produced the Fermi bubbles.

astro-ph.GA↗

arXiv2025

Dynamical constraints on the S2 (S0-2) star possible companions

The center of the Galaxy harbors a supermassive black hole, Sgr\,A*, which is surrounded by a massive star cluster known as the S-cluster. The most extensively studied star in this cluster is the B-type main-sequence S2 star (also known as S0-2). These types of stars are commonly found in binary systems in the Galactic field, but observations do not seem to detect a companion to S2. This absence may be attributed to observational biases or to a dynamically hostile environment caused by phenomena such as tidal disruption or mergers. Using a $N$-body code with first-order post-Newtonian corrections, we investigate whether S2 can host a stellar or planetary companion. We perform $10^{5}$ simulations adopting uniform distributions for the orbital elements of the companion. Our results show that companions may exist for orbital periods shorter than 100~days, eccentricities below 0.8, and across the full range of mutual inclinations. The number of surviving companions increases with shorter orbital periods, lower eccentricities, and nearly coplanar orbits. We also find that the disruption mechanisms include mergers driven by Lidov-Kozai cycles and breakups that occur when the companion surpasses the Hill radius of its orbit. Finally, we find that the presence of a companion would alter S2's astrometric signal by no more than $ 5\,μ{\rm as}$. Current radial-velocity detection limits constrain viable stellar binary configurations to approximately 4.4\% of the simulated cases. Including astrometric limits reduces to 4.3\%. Imposing an additional constraint that any companion must have a mass $\lesssim 2\,M_{\odot}$ (otherwise it would be visible) narrows the fraction of undetectable stellar binaries to just 3.0\%.

astro-ph.GA↗

arXiv2022

Building a GRAVITY+ Adaptive Optics Test Bench

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

astro-ph.IM↗

arXiv2019

Scalar field effects on the orbit of S2 star

Precise measurements of the S-stars orbiting SgrA* have set strong constraints on the nature of the compact object at the centre of the Milky Way. The presence of a black hole in that region is well established, but its neighboring environment is still an open debate. In that respect, the existence of dark matter in that central region may be detectable due to its strong signatures on the orbits of stars: the main effect is a Newtonian precession which will affect the overall pericentre shift of S2, the latter being a target measurement of the GRAVITY instrument. The exact nature of this dark matter (e.g., stellar dark remnants or diffuse dark matter) is unknown. This article assumes it to be an scalar field of toroidal distribution, associated with ultra-light dark matter particles, surrounding the Kerr black hole. Such a field is a form of "hair" expected in the context of superradiance, a mechanism that extracts rotational energy from the black hole. Orbital signatures for the S2 star are computed and shown to be detectable by GRAVITY. The scalar field can be constrained because the variation of orbital elements depends both on the relative mass of the scalar field to the black hole and on the field mass coupling parameter.

astro-ph.GA↗

arXiv2018

Why Chromatic Imaging Matters

During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u-v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.

astro-ph.IM↗

arXiv2018

Estimation of atmospheric turbulence parameters from Shack-Hartmann wavefront sensor measurements

The estimation of atmospheric turbulence parameters is of relevance for: a) site evaluation & characterisation; b) prediction of the point spread function; c) live assessment of error budgets and optimisation of adaptive optics performance; d) optimisation of fringe trackers for long baseline optical interferometry. The ubiquitous deployment of Shack-Hartmann wavefront sensors in large telescopes makes them central for atmospheric turbulence parameter estimation via adaptive optics telemetry. Several methods for the estimation of the Fried parameter and outer scale have been developed, most of which are based on the fitting of Zernike polynomial coefficients variances reconstructed from the telemetry. The non-orthogonality of Zernike polynomial derivatives introduces modal cross coupling, which affects the variances. Furthermore, the finite resolution of the sensor introduces aliasing. In this article the impact of these effects on atmospheric turbulence parameter estimation is addressed with simulations. It is found that cross coupling is the dominant bias. An iterative algorithm to overcome it is presented. Simulations are conducted for typical ranges of the outer scale (4 to 32m), Fried parameter (10 cm) and noise in the variances (signal-to-noise ratio of 10 and above). It is found that, using the algorithm, both parameters are recovered with sub-percent accuracy.

astro-ph.IM↗

arXiv2018

Peak-locking centroid bias in Shack-Hartmann wavefront sensing

Shack-Hartmann wavefront sensing relies on accurate spot centre measurement. Several algorithms were developed with this aim, mostly focused on precision, i.e. minimizing random errors. In the solar and extended scene community, the importance of the accuracy (bias error due to peak-locking, quantisation or sampling) of the centroid determination was identified and solutions proposed. But these solutions only allow partial bias corrections. To date, no systematic study of the bias error was conducted. This article bridges the gap by quantifying the bias error for different correlation peak-finding algorithms and types of sub-aperture images and by proposing a practical solution to minimize its effects. Four classes of sub-aperture images (point source, elongated laser guide star, crowded field and solar extended scene) together with five types of peak-finding algorithms (1D parabola, the centre of gravity, Gaussian, 2D quadratic polynomial and pyramid) are considered, in a variety of signal-to-noise conditions. The best performing peak-finding algorithm depends on the sub-aperture image type, but none is satisfactory to both bias and random errors. A practical solution is proposed that relies on the anti-symmetric response of the bias to the sub-pixel position of the true centre. The solution decreases the bias by a factor of ~7 to values of < 0.02 pix. The computational cost is typically twice of current cross-correlation algorithms.

astro-ph.IM↗

arXiv2017

Assessing the quality of restored images in optical long-baseline interferometry

Assessing the quality of aperture synthesis maps is relevant for benchmarking image reconstruction algorithms, for the scientific exploitation of data from optical long-baseline interferometers, and for the design/upgrade of new/existing interferometric imaging facilities. Although metrics have been proposed in these contexts, no systematic study has been conducted on the selection of a robust metric for quality assessment. This article addresses the question: what is the best metric to assess the quality of a reconstructed image? It starts by considering several metrics, and selecting a few based on general properties. Then, a variety of image reconstruction cases is considered. The observational scenarios are phase closure and phase referencing at the Very Large Telescope Interferometer (VLTI), for a combination of two, three, four and six telescopes. End-to-end image reconstruction is accomplished with the MiRA software, and several merit functions are put to test. It is found that convolution by an effective point spread function is required for proper image quality assessment. The effective angular resolution of the images is superior to naive expectation based on the maximum frequency sampled by the array. This is due to the prior information used in the aperture synthesis algorithm and to the nature of the objects considered. The l1 norm is the most robust of all considered metrics, because being linear it is less sensitive to image smoothing by high regularisation levels. For the cases considered, this metric allows the implementation of automatic quality assessment of reconstructed images, with a performance similar to human selection.

astro-ph.IM↗

arXiv2011

High precision astrometry mission for the detection and characterization of nearby habitable planetary systems with the Nearby Earth Astrometric Telescope (NEAT)

(abridged) A complete census of planetary systems around a volume-limited sample of solar-type stars (FGK dwarfs) in the Solar neighborhood with uniform sensitivity down to Earth-mass planets within their Habitable Zones out to several AUs would be a major milestone in extrasolar planets astrophysics. This fundamental goal can be achieved with a mission concept such as NEAT - the Nearby Earth Astrometric Telescope. NEAT is designed to carry out space-borne extremely-high-precision astrometric measurements sufficient to detect dynamical effects due to orbiting planets of mass even lower than Earth's around the nearest stars. Such a survey mission would provide the actual planetary masses and the full orbital geometry for all the components of the detected planetary systems down to the Earth-mass limit. The NEAT performance limits can be achieved by carrying out differential astrometry between the targets and a set of suitable reference stars in the field. The NEAT instrument design consists of an off-axis parabola single-mirror telescope, a detector with a large field of view made of small movable CCDs located around a fixed central CCD, and an interferometric calibration system originating from metrology fibers located at the primary mirror. The proposed mission architecture relies on the use of two satellites operating at L2 for 5 years, flying in formation and offering a capability of more than 20,000 reconfigurations (alternative option uses deployable boom). The NEAT primary science program will encompass an astrometric survey of our 200 closest F-, G- and K-type stellar neighbors, with an average of 50 visits. The remaining time might be allocated to improve the characterization of the architecture of selected planetary systems around nearby targets of specific interest (low-mass stars, young stars, etc.) discovered by Gaia, ground-based high-precision radial-velocity surveys.

astro-ph.EP↗

arXiv2007

Preparing an ESO proposal

Preparing observing proposals is a classical exercise in an observational astronomer's life. In this paper, we summarize the general requirements to write a good proposal for the ESO telescopes, and eventually obtain telescope time. We detail in particular the different proposal types, how they are evaluated by ESO, what they should contain and what to avoid. The advice given in the present paper are applicable to observing proposals for the AMBER and MIDI instruments of the VLTI, but also to other ESO instruments, and to some extent to other observatories.

astro-ph↗

arXiv2005

VITRUV - Science Cases

VITRUV is a second generation spectro-imager for the PRIMA enabled Very Large Telescope Interferometer. By combining simultaneously up to 8 telescopes VITRUV makes the VLTI up to 6 times more efficient. This operational gain allows two novel scientific methodologies: 1) massive surveys of sizes; 2) routine interferometric imaging. The science cases presented concentrate on the qualitatively new routine interferometric imaging methodology. The science cases are not exhaustive but complementary to the PRIMA reference mission. The focus is on: a) the close environment of young stars probing for the initial conditions of planet formation and disk evolution; b) the surfaces of stars tackling dynamos, activity, pulsation, mass-loss and evolution; c) revealing the origin of the extraordinary morphologies of Planetary Nebulae and related stars; d) studying the accretion-ejection structures of stellar black-holes (microquasars) in our galaxy; e) unveiling the different interacting components (torus, jets, BLRs) of Active Galactic Nuclei; and f) probing the environment of nearby supermassive black-holes and relativistic effects in the Galactic Center black-hole.

astro-ph↗

arXiv2001

Atomic T Tauri disk winds heated by ambipolar diffusion I- Thermal structure

Motivated by recent subarcsecond resolution observations of jets from T Tauri stars, we extend the work of \citep{Safier93a, Safier93b} by computing the thermal and ionization structure of self-similar, magnetically-driven, atomic disk winds heated by ambipolar diffusion. Improvements over his work include: (1) new magnetized cold jet solutions consistent with the underlying accretion disk \citep{Ferreira97}; (2) a more accurate treatment of ionization and ion-neutral momentum exchange rates; and (3) predictions for spatially resolved forbidden line emission (maps, long-slit spectra, and line ratios), presented in a companion paper, \cite{Garcia2001b}. As in \citep{Safier93a}, we obtain jets with a temperature plateau around $10^4$ K, but ionization fractions are revised downward by a factor of 10-100. This is due to previous omission of thermal speeds in ion-neutral momentum-exchange rates and to different jet solutions. The physical origin of the hot temperature plateau is outlined. In particular we present three analytical criteria for the presence of a hot plateau, applicable to any given MHD wind solution where ambipolar diffusion and adiabatic expansion are the dominant heating and cooling terms. We finally show that, for solutions favored by observations, the jet thermal structure remains consistent with the usual approximations used for MHD jet calculations (thermalized, perfectly conducting, single hydromagnetic cold fluid calculations).

astro-ph↗

arXiv2001

Atomic T Tauri disk winds heated by ambipolar diffusion II- Observational tests

Thermal and ionization structures of self-similar, magnetically-driven disk winds obtained in a companion paper \cite{Garcia2001a} are used to compute a series of jet synthetic observations. These include spatially resolved forbidden line emission maps, long-slit spectra, as well as line ratios. Line profiles and jet widths appear to be good tracers of the wind dynamics and collimation, whereas line ratios essentially trace gas excitation conditions. All the above diagnostics are confronted to observations of T Tauri star microjets. Convolution by the observing beam is shown to be essential for a meaningful test of the models. We find that jet widths and qualitative variations in line profiles with both distance and line tracers are well reproduced. A low-velocity [\ion{O}{i}] component is also obtained, originating from the disk wind base. However, this component is too weak, predicted maximum velocities are too high and electronic and total densities are too low. Denser and slower magnetized winds, launched from disks with warm chromospheres, might resolve these discrepancies.

astro-ph↗

arXiv2001

Atomic T Tauri disk winds heated by ambipolar diffusion

We summarize results on the thermal and ionization structure of self-similar, magnetically-driven, atomic disk winds heated by ambipolar diffusion. We improve upon earlier work by Safier by considering (1) new MHD solutions consistent with underlying cold keplerian disk equilibrium, (2) a more accurate treatment of the micro-physics, and (3) predictions for spatially resolved forbidden line emission (maps, long-slit spectra). The temperature plateau $\simeq 10^4$ K found earlier is recovered, but ionization fractions are revised downward by a factor of 10, due to previous omission of thermal speeds in ion-neutral momentum-exchange rates. The physical origin of the temperature plateau is outlined. Predictions are then compared with T~Tauri star observations, with emphasis on the necessity of suitable beam convolution. Jet widths and variations in line profiles with distance and line tracer are well reproduced. However, predicted maximum velocities are too high, total densities too low, and the low-velocity [OI] component is too weak. Denser, slower MHD winds from warm disks might resolve these discrepancies.

astro-ph↗