Searcharxiv⌕ Search

arXiv subjects

Pavel Cheben

Publications and source records attributed to Pavel Cheben.

25 records · Page 2Linked to original sources
arXiv2020

Photonic Temperature and Wavelength Metrology by Spectral Pattern Recognition

Spectral pattern recognition is used to measure temperature and generate calibrated wavelength/frequency combs using a single silicon waveguide ring resonator. The ring generates two incommensurate interleaving TE and TM spectral combs that shift independently with temperature to create a spectral pattern that is unique at every temperature. Following an initial calibration, the ring temperature can be determined by recognizing the spectral resonance pattern, and as a consequence the wavelength of every resonance is also known. Two methods of pattern based temperature retrieval are presented. In the first method, the ring is locked to a previously determined temperature set-point defined by the coincidence of only two specific TE and TM cavity modes. Based on a prior calibration at the set-point, the ring temperature and hence all resonance wavelengths are then known and the resulting comb can be used as a wavelength calibration reference. In this configuration, all reference comb wavelengths have been reproduced within a 5 pm accuracy across an 80 nm range by using an on-chip micro-heater to tune the ring. For more general photonic thermometry, a spectral correlation algorithm is developed to recognize a resonance pattern across a 30 nm wide spectral window and thereby determine ring temperature continuously to 50 mK accuracy. The correlation method is extended to simultaneously determine temperature and to identify and correct for wavelength calibration errors in the interrogating light source. The temperature and comb wavelength accuracy is limited primarily by the linewidth of the ring resonances, with accuracy and resolution scaling with the ring quality factor.

physics.optics↗
arXiv2019

Ultra-broadband nanophotonic phase shifter based on subwavelength metamaterial waveguides

Optical phase shifters are extensively used in integrated optics not only for telecom and datacom applications, but also for sensors and quantum computing. While various active solutions have been demonstrated, progress in passive phase shifters is still lacking. Here, we present a new type of ultra-broadband 90° phase shifter, which exploits the anisotropy and dispersion engineering in subwavelength metamaterial waveguides. Our Floquet-Bloch calculations predict a phase shift error below $\pm$1.7° over an unprecedented operation range from 1.35 $μ$m to 1.75 $μ$m, i.e. 400 nm bandwidth covering the E, S, C, L and U telecommunication bands. The flat spectral response of our phase shifter is maintained even in the presence of fabrication errors up to $\pm$20 nm, showing greater robustness than conventional structures. Our device was experimentally demonstrated using standard 220-nm-thick SOI wafers, showing a fourfold reduction in the phase variation compared to conventional phase shifters within the 145 nm wavelength range of our measurement setup. The proposed subwavelength engineered phase shifter paves the way for novel photonic integrated circuits with an ultra-broadband performance.

physics.optics↗
arXiv2019

Mapping the global design space of nanophotonic components using machine learning pattern recognition

Nanophotonics finds ever broadening applications requiring complex component designs with a large number of parameters to be simultaneously optimized. Recent methodologies employing optimization algorithms commonly focus on a single design objective, provide isolated designs, and do not describe how the design parameters influence the device behaviour. Here we propose and demonstrate a machine-learning-based approach to map and characterize the multi-parameter design space of nanophotonic components. Pattern recognition is used to reveal the relationship between an initial sparse set of optimized designs through a significant reduction in the number of characterizing parameters. This defines a design sub-space of lower dimensionality that can be mapped faster by orders of magnitude than the original design space. As a result, multiple performance criteria are clearly visualized, revealing the interplay of the design parameters, highlighting performance and structural limitations, and inspiring new design ideas. This global perspective on high-dimensional design problems represents a major shift in how modern nanophotonic design is approached and provides a powerful tool to explore complexity in next-generation devices.

physics.app-ph↗
arXiv2018

Polarization and wavelength agnostic nanophotonic beam splitter

High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of the silicon-on-insulator platform, state of the art Si splitters are hampered by trade-offs in bandwidth, polarization dependence and sensitivity to fabrication errors. Here, we present a new strategy that exploits modal engineering in slotted waveguides to overcome these limitations, enabling ultra-wideband polarization-insensitive optical power splitters, with relaxed fabrication tolerances. The proposed splitter relies on a single-mode slot waveguide which is transformed into two strip waveguides by a symmetric taper, yielding equal power splitting. Based on this concept, we experimentally demonstrate -3$\pm$0.5 dB polarization-independent transmission in an unprecedented 390 nm bandwidth (1260 - 1650 nm), even in the presence of waveguide width deviations as large as $\pm$25 nm.

physics.app-ph↗
arXiv2016

Long-period suspended silicon Bragg grating filter for hybrid near- and mid-infrared operation

The large transparency window of silicon, covering the 1.1 um 8 um wavelength range, makes it a promising platform for the implementation of photothermal-based absorption spectrometers. These devices indirectly sense absorption in the mid-infrared (MIR) by using near-infrared (NIR) wavelengths, thereby enabling the realization of MIR absorption spectrometers without the need for MIR photodetectors. Nevertheless, due to their comparatively large index contrast and cross-sections, MIR Si strip waveguides are multi-mode at NIR wavelengths, hindering device implementation. Here we present, for the first time, an integrated Bragg grating waveguide filter for hybrid near- and mid-infrared operation. Specifically, the filter is implemented in a single-etch suspended silicon corrugated waveguide with an effectively single-mode operation in NIR region for a waveguide cross-section as large as 0.5 um x 1.1 um. At the same time, the waveguide supports single-mode propagation in MIR region. We demonstrate a long-period waveguide Bragg grating yielding a sharp third-order Bragg resonance for the fundamental waveguide mode and radiating the higher order modes. We experimentally demonstrate a notch filter with a 4nm bandwidth and 40 dB extinction ratio with a temperature-dependent Bragg wavelength shift of 70pm/K.

physics.optics↗
arXiv2016

Ultra broadband waveveguide coupler using an anisotropic sub-wavelength metamaterial

Multimode interference couplers are a fundamental building block in many integrated photonic systems, ranging from high-speed coherent receivers to quantum splitters. However, their basic structure has remained fundamentally unchanged for almost four decades, limiting their size and operation bandwidth. Using sub-wavelength metamaterials, photonic devices with break-through size and performance have been recently reported. Leveraging the inherent anisotropy of these structures, here we derive a semi-analytic expression that enables the design of compact and ultra broadband multimode interference couplers. We experimentally demonstrate virtually perfect operation over a bandwidth in excess of 300nm (500nm in simulation), for a device three times shorter than its conventional counterpart, making this the most broadband multimode interference coupler reported to date. These results will enable ultra broadband integrated systems for applications in communications and sensing.

physics.optics↗