Searcharxiv⌕ Search

arXiv subjects

Pavel Honzatko

Publications and source records attributed to Pavel Honzatko.

2 recordsLinked to original sources

Thulium- and Holmium-Doped Silica Fibres for 2 μm High-Power and Highly-Efficient Lasers

Silica optical fibres, originally developed as a low-loss transmission medium for telecommunications, have evolved into a versatile platform for compact and efficient high-power lasers. This review discusses recent progress in thulium- and holmium-doped active fibres emitting within the 2 μm spectral band, with an emphasis on material and waveguide approaches that address power scaling through thermal-load mitigation and enhanced laser efficiency. In particular, the temperature dependence of absorption and emission cross-sections are reviewed, and their implications for spectral gain, amplified spontaneous emission and high-power laser operation are discussed. Structured-core thulium fibres are then considered as a route to combining the high local Tm3+ concentration required for efficient two for- one cross-relaxation with a reduced average dopant concentration, lower longitudinal heat load, and a pedestal-free waveguide design. Finally, recent results on holmium-doped silica fibres prepared by nanoparticle-assisted modified chemical vapour deposition are summarised. Crucially, the Al/Ho ratio is identified as a key compositional parameter governing laser efficiency, while a high absolute alumina content supports a long fluorescence lifetime and enables high Ho3+ concentrations without excessive clustering. These advances have enabled core-pumped holmium fibre lasers with slope efficiencies reaching 84% and output powers approaching 100W. Collectively, these development illustrate how control of spectroscopy, composition, and transverse dopant distribution can extend the performance of silica fibre lasers across the 1.7-2.2 μm spectral region.

physics.optics↗

Preparation and characterization of highly thulium- and alumina-doped optical fibers for single-frequency fiber lasers

Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to prevent the cooperative upconversion and quenching processes. The fabricated fibers featured pump absorption up to 70dB/m at a pump wavelength of 1611nm. The single-frequency master oscillator with a resonator composed of a pair of fiber Bragg gratings and a thulium-doped fiber was demonstrated with predominantly single ended operation. We achieved a slope efficiency of 22% and a threshold of 22mW at a lasing wavelength of 1944nm.

physics.optics↗