arXiv subjects

Pavel Polynkin

Publications and source records attributed to Pavel Polynkin.

9 recordsLinked to original sources

arXiv2026

A finite-difference model for intense light interactions with dielectrics in the ultrafast ionization regime

We present a computationally efficient model that describes the interaction of intense, ultrashort infrared laser pulses with transparent materials in the strong ionization regime. The model is augmented with a detailed self-consistent description of the local response due to ionization and collisional plasma dynamics. It incorporates the direct solution of Maxwell's equations without approximations and rigorous boundary conditions for the input pulse, allowing us to study the ultrafast formation of over-critical nanoscaled plasmas in dielectric materials under the influence of intense tightly focused laser pulses. We perform a scan of the parameter space, find unexpected optima regimes for different experientially relevant parameters, and explain these maxima based on spatiotemporal dynamics.

physics.plasm-ph↗

arXiv2025

Optimized Sampling for Non-Line-of-Sight Imaging Using Modified Fast Fourier Transforms

Non-line-of-Sight (NLOS) imaging systems collect light at a diffuse relay surface and input this measurement into computational algorithms that output a 3D volumetric reconstruction. These algorithms utilize the Fast Fourier Transform (FFT) to accelerate the reconstruction process but require both input and output to be sampled spatially with uniform grids. However, the geometry of NLOS imaging inherently results in non-uniform sampling on the relay surface when using multi-pixel detector arrays, even though such arrays significantly reduce acquisition times. Furthermore, using these arrays increases the data rate required for sensor readout, posing challenges for real-world deployment. In this work, we utilize the phasor field framework to demonstrate that existing NLOS imaging setups typically oversample the relay surface spatially, explaining why the measurement can be compressed without significantly sacrificing reconstruction quality. This enables us to utilize the Non-Uniform Fast Fourier Transform (NUFFT) to reconstruct from sparse measurements acquired from irregularly sampled relay surfaces of arbitrary shapes. Furthermore, we utilize the NUFFT to reconstruct at arbitrary locations in the hidden volume, ensuring flexible sampling schemes for both the input and output. Finally, we utilize the Scaled Fast Fourier Transform (SFFT) to reconstruct larger volumes without increasing the number of samples stored in memory. All algorithms introduced in this paper preserve the computational complexity of FFT-based methods, ensuring scalability for practical NLOS imaging applications.

eess.IV↗

arXiv2024

Iterating the Transient Light Transport Matrix for Non-Line-of-Sight Imaging

Active imaging systems sample the Transient Light Transport Matrix (TLTM) for a scene by sequentially illuminating various positions in this scene using a controllable light source, and then measuring the resulting spatiotemporal light transport with time of flight (ToF) sensors. Time-resolved Non-line-of-sight (NLOS) imaging employs an active imaging system that measures part of the TLTM of an intermediary relay surface, and uses the indirect reflections of light encoded within this TLTM to "see around corners". Such imaging systems have applications in diverse areas such as disaster response, remote surveillance, and autonomous navigation. While existing NLOS imaging systems usually measure a subset of the full TLTM, development of customized gated Single Photon Avalanche Diode (SPAD) arrays \cite{riccardo_fast-gated_2022} has made it feasible to probe the full measurement space. In this work, we demonstrate that the full TLTM on the relay surface can be processed with efficient algorithms to computationally focus and detect our illumination in different parts of the hidden scene, turning the relay surface into a second-order active imaging system. These algorithms allow us to iterate on the measured, first-order TLTM, and extract a \textbf{second order TLTM for surfaces in the hidden scene}. We showcase three applications of TLTMs in NLOS imaging: (1) Scene Relighting with novel illumination, (2) Separation of direct and indirect components of light transport in the hidden scene, and (3) Dual Photography. Additionally, we empirically demonstrate that SPAD arrays enable parallel acquisition of photons, effectively mitigating long acquisition times.

physics.optics↗

arXiv2023

Ionization clamping in ultrafast optical breakdown of transparent solids

We formulate a multi-physics model to describe the nonlinear propagation of a femtosecond, near-infrared, tightly focused laser pulse in a transparent dielectric. The application of our model to the case of bulk sapphire shows that even under extreme excitation conditions, ionization is universally clamped at about one tenth of the electron density in the upper valence band. The earlier estimate of ~10 TPa pressure that could be attainable through the internal excitation of transparent dielectrics by tightly focused ultrafast laser beams is shown to be off by two orders of magnitude.

physics.optics↗

arXiv2016

Universal threshold for femtosecond laser ablation with oblique illumination

We quantify the dependence of the single-shot ablation threshold on the angle of incidence and polarization of a femtosecond laser beam, for three dissimilar solid-state materials: a metal, a dielectric and a semiconductor. Using the constant, linear value of the index of refraction, we calculate the laser fluence transmitted through the air-material interface at the point of ablation threshold. We show that, in spite of the highly nonlinear ionization dynamics involved in the ablation process, the so defined transmitted threshold fluence is universally independent of the angle of incidence and polarization of the laser beam for all three material types. We suggest that angular dependence of ablation threshold can be utilized for profiling fluence distributions in ultra-intense femtosecond laser beams.

physics.optics↗

arXiv2016

Picosecond laser filamentation in air

The propagation of intense picosecond laser pulses in air in the presence of strong nonlinear self-action effects and air ionization is investigated experimentally and numerically. The model used for numerical analysis is based on the nonlinear propagator for the optical field coupled with the rate equations for the production of various ionic species and plasma temperature. Our results show that the phenomenon of plasma-driven intensity clamping, which is paramount in femtosecond laser filamentation, holds for picosecond pulses. Furthermore, the temporal pulse distortions are limited and the pulse fluence is also clamped. The resulting unique feature of the picosecond filamentation regime is the production of a broad, fully ionized air channel, continuous both longitudinally and transversely, which may be instrumental for numerous applications.

physics.plasm-ph↗

arXiv2014

Generation of multi-terawatt vortex laser beams

We report the fabrication of large-area phase masks on thin fused-silica substrates that are suitable for shaping multi-terawatt femtosecond laser beams. We apply these phase masks for the generation of intense femtosecond optical vortices. We further quantify distortions of the vortex beam patterns that result from several common types of mask defects.

physics.optics↗

arXiv2011

Third and fifth harmonics generation by tightly focused femtosecond pulses at 2.2 μm wavelength in air

We report experiments on the generation of third and fifth harmonics of millijoule-level, tightly focused, femtosecond laser pulses at 2.2 μm wavelength in air. The measured ratio of yields of the third and fifth harmonics in our setup is about 2 \cdot 10-4. This result contradicts the recent suggestion that the Kerr effect in air saturates and changes sign in ultra-intense optical fields.

physics.optics↗

arXiv2010

Experimental Tests of the New Paradigm for Laser Filamentation in Gases

Since their discovery in the mid-1990s, ultrafast laser filaments in gases have been described as products of a dynamic balance between Kerr self-focusing and defocusing by free electric charges that are generated via multi-photon ionization on the beam axis. This established paradigm has been recently challenged by a suggestion that the Kerr effect saturates and even changes sign at high intensity of light, and that this sign reversal, not free-charge defocusing, is the dominant mechanism responsible for the extended propagation of laser filaments. We report qualitative tests of the new theory based on electrical and optical measurements of plasma density in femtosecond laser filaments in air and argon. Our results consistently support the established paradigm.

physics.optics↗