arXiv subjects

Pavlo Zubko

Publications and source records attributed to Pavlo Zubko.

11 recordsLinked to original sources

arXiv2026

Alternative origins of polarity in compressively strained SrTiO3-RENiO3 capacitors

Since its original prediction 25 years ago, room-temperature out-of-plane ferroelectricity in compressively strained SrTiO3 remains an ongoing pursuit. In this work, we investigate the structural, electrical and electromechanical properties of highly strained epitaxial SrTiO3 capacitors with rare earth nickelate electrodes. The SrTiO3 layers experience compressive strains up to -3% and exhibit pronounced tetragonality, comparable to that of bulk PbTiO3. Variable-temperature electrical measurements and room-temperature piezoresponse force microscopy reveal butterfly-shaped capacitance-voltage hysteresis and domain-like electromechanical response typical of ferroelectric materials. However, the overall behavior is inconsistent with a stable ferroelectric state. We therefore propose an alternative mechanism for the observed polarity in our samples based on spatially inhomogeneous internal fields. Our first-principles calculations show that such fields may arise from charge discontinuities between the formally charged NdNiO3 layers and charge-neutral SrTiO3 layers.

cond-mat.mtrl-sci↗

arXiv2024

Assessing the nature of nanoscale ferroelectric domain walls in lead titanate multilayers

The observation of unexpected polarisation textures such as vortices, skyrmions and merons in various oxide heterostructures has challenged the widely accepted picture of ferroelectric domain walls as being Ising-like. Bloch components in the 180° domain walls of PbTiO3 have recently been reported in PbTiO3/SrTiO3 superlattices and linked to domain wall chirality. While this opens exciting perspectives, the ubiquitous nature of this Bloch component remains to be further explored. In this work, we present a comprehensive investigation of domain walls in PbTiO3/SrTiO3 superlattices, involving a combination of first- and second-principles calculations, phase-field simulations, diffuse scattering calculations, and synchrotron based diffuse x-ray scattering. Our theoretical calculations highlight that the previously predicted Bloch polarisation in the 180° domain walls in PbTiO3/SrTiO3 superlattices might be more sensitive to the boundary conditions than initially thought and is not always expected to appear. Employing diffuse scattering calculations for larger systems we develop a method to probe the complex structure of domain walls in these superlattices via diffuse x-ray scattering measurements. Through this approach, we investigate depolarization-driven ferroelectric polarization rotation at the domain walls. Our experimental findings, consistent with our theoretical predictions for realistic domain periods, do not reveal any signatures of a Bloch component in the centres of the 180° domain walls of PbTiO3/SrTiO3 superlattices, suggesting that the precise nature of domain walls in the ultrathin PbTiO3 layers is more intricate than previously thought and deserves further attention.

cond-mat.mtrl-sci↗

arXiv2022

Giant voltage amplification from incipient ferroelectric states

Ferroelectrics subject to suitable electric boundary conditions present a steady negative capacitance response. When the ferroelectric is in a heterostructure, this behavior yields a voltage amplification in the other elements, which experience a potential difference larger than the one applied, holding promise for low-power electronics. So far research has focused on verifying this effect and little is known about how to optimize it. Here we describe an electrostatic theory of ferroelectric/dielectric superlattices, convenient model systems, and show the relationship between the negative permittivity of the ferroelectric layers and the voltage amplification in the dielectric ones. Then, we run simulations of PbTiO3/SrTiO3 superlattices to reveal the factors most strongly affecting the amplification. In particular, we find that giant effects (up to 10-fold increases) can be obtained when PbTiO3 is brought close to the so-called "incipient ferroelectric" state.

cond-mat.mtrl-sci↗

arXiv2018

Domain Wall Orientations in Ferroelectric Superlattices Probed with Synchrotron X-Ray Diffraction

Ferroelectric domains in PbTiO$_3$/SrTiO$_3$ superlattices were studied using synchrotron X-ray diffraction. Macroscopic measurements revealed a change in the domain wall orientation from $\left\lbrace 100 \right\rbrace $ to $\left\lbrace 110 \right\rbrace $ crystallographic planes with increasing temperature. The temperature range of this reorientation depends on the ferroelectric layer thickness and domain period. Using a nanofocused beam, local changes in domain wall orientation within the buried ferroelectric layers were imaged, both in structurally uniform regions of the sample and near defect sites and argon ion etched patterns. Domain walls were found to exhibit preferential alignment with the straight edges of the etched patterns as well as with structural features associated with defect sites. The distribution of out-of-plane lattice parameters was mapped around one such feature, showing that it is accompanied by inhomogeneous strain and large strain gradients.

cond-mat.mes-hall↗

arXiv2017

Charge doping and large lattice expansion in oxygen-deficient heteroepitaxial WO3

Tungsten trioxide is a versatile material with widespread applications ranging from electrochromic and optoelectronic devices to water splitting and catalysis of chemical reactions. For technological applications, thin films of WO3 are particularly appealing, taking advantage from high surface-to-volume ratio and tunable physical properties. However, the growth of stoichiometric, crystalline thin films is challenging because the deposition conditions are very sensitive to the formation of oxygen vacancies. In this work, we show how background oxygen pressure during pulsed laser deposition can be used to tune the structural and electronic properties of WO3 thin films. By performing X-ray diffraction and low-temperature transport measurements, we find changes in WO3 lattice volume up to 10%, concomitantly with an insulator-to-metal transition as a function of increased level of electron doping. We use advanced ab initio calculations to describe in detail the properties of the oxygen vacancy defect states, and their evolution in terms of excess charge concentration. Our results depict an intriguing scenario where structural, electronic, optical, and transport properties of WO3 single-crystal thin films can all be purposely tuned by a suited control of oxygen vacancies formation during growth.

cond-mat.mtrl-sci↗

arXiv2017

On the persistence of polar domains in ultrathin ferroelectric capacitors

The instability of ferroelectric ordering in ultra-thin films is one of the most important fundamental issues pertaining realization of a number of electronic devices with enhanced functionality, such as ferroelectric and multiferroic tunnel junctions or ferroelectric field effect transistors. In this paper, we investigate the polarization state of archetypal ultrathin (several nanometres) ferroelectric heterostructures: epitaxial single-crystalline BaTiO$_3$ films sandwiched between the most habitual perovskite electrodes, SrRuO$_3$, on top of the most used perovskite substrate, SrTiO$_3$. We use a combination of piezoresponse force microscopy, dielectric measurements and structural characterization to provide conclusive evidence for the ferroelectric nature of the relaxed polarization state in ultrathin BaTiO$_3$ capacitors. We show that even the high screening efficiency of SrRuO$_3$ electrodes is still insufficient to stabilize polarization in SrRuO$_3$/BaTiO$_3$/SrRuO$_3$ heterostructures at room temperature. We identify the key role of domain wall motion in determining the macroscopic electrical properties of ultrathin capacitors and discuss their dielectric response in the light of the recent interest in negative capacitance behaviour.

cond-mat.mtrl-sci↗

arXiv2016

Striped nanoscale phase separation at the metal-insulator transition of heteroepitaxial nickelates

Nucleation processes of mixed-phase states are an intrinsic characteristic of first-order phase transitions, typically related to local symmetry breaking. Direct observation of emerging mixed-phase regions in materials showing a first-order metal-insulator transition (MIT) offers unique opportunities to uncover their driving mechanism. Using photoemission electron microscopy, we image the nanoscale formation and growth of insulating domains across the temperature-driven MIT in NdNiO3 epitaxial thin films. Heteroepitaxy is found to strongly determine the nanoscale nature of the phase transition, inducing preferential formation of striped domains along the terraces of atomically flat stepped surfaces. We show that the distribution of transition temperatures is an intrinsic local property, set by surface morphology and stable across multiple temperature cycles. Our data provides new insights into the MIT of heteroepitaxial nickelates and points to a rich, nanoscale phenomenology in this strongly correlated material.

cond-mat.str-el↗

arXiv2016

Ground state oxygen holes and the metal-insulator transition in the negative charge transfer rare-earth nickelates

The metal-insulator transitions and the intriguing physical properties of rare-earth perovskite nickelates have attracted considerable attention in recent years. Nonetheless, a complete understanding of these materials remains elusive. Here, taking a NdNiO3 thin film as a representative example, we utilize a combination of x-ray absorption and resonant inelastic x-ray scattering (RIXS) spectroscopies to resolve important aspects of the complex electronic structure of the rare-earth nickelates. The unusual coexistence of bound and continuum excitations observed in the RIXS spectra provides strong evidence for the abundance of oxygen 2p holes in the ground state of these materials. Using cluster calculations and Anderson impurity model interpretation, we show that these distinct spectral signatures arise from a Ni 3d8 configuration along with holes in the oxygen 2p valence band, confirming suggestions that these materials do not obey a conventional positive charge-transfer picture, but instead exhibit a negative charge-transfer energy, in line with recent models interpreting the metal to insulator transition in terms of bond disproportionation.

cond-mat.str-el↗

arXiv2015

Tuning of the depolarization field and nanodomain structure in ferroelectric thin films

The screening efficiency of a metal-ferroelectric interface plays a critical role in determining the polarization stability and hence the functional properties of ferroelectric thin films. Imperfect screening leads to strong depolarization fields that reduce the spontaneous polarization or drive the formation of ferroelectric domains. We demonstrate that by modifying the screening at the metal-ferroelectric interface through insertion of ultrathin dielectric spacers, the strength of the depolarization field can be tuned and thus used to control the formation of nanoscale domains. Using piezoresponse force microscopy, we follow the evolution of the domain configurations as well as polarization stability as a function of depolarization field strength.

cond-mat.mtrl-sci↗

arXiv2012

Ferroelectricity in ultrathin film capacitors

Going down to the limit of ultrathin films holds promise for a new generation of devices such as ferroelectric tunnel junctions or resistive memories. However, these length scales also make the devices sensitive to parasitic effects related to miniaturization, and a better understanding of what happens as size is reduced is of practical importance for the future development of these devices. As the experimental advances in materials preparation and characterization have come together with great progress in theoretical modeling of ferroelectrics, both theorists and experimentalists can finally probe the same length and time scales. This allows realtime feedback between theory and experiment, with new discoveries now routinely made both in the laboratory and on the computer. Throughout this chapter, we will highlight the recent advances in density functional theory based modeling and the role it played in our understanding of ultrathin ferroelectrics. We will begin with a brief introduction to ferroelectricity and ferroelectric oxides, followed by an overview of the major theoretical developments. We will then discuss some of the subtleties of ferroelectricity in perovskite oxides, before turning our attention to the main subject of the chapter -- ferroelectricity in ultrathin films. We will discuss in detail the influence of the mechanical, electrical and chemical boundary conditions on the stability of the polar state in a parallel plate capacitor geometry, introducing the notion of depolarization fields that tend to destabilize ferroelectricity. We will look at other ways in which a thin ferroelectric can preserve its polar state, focusing on ferroelectric domains and domain walls. Finally, we will briefly discuss artificially layered ferroelectrics and the potential they hold as tailor-made materials for electronic applications.

cond-mat.mtrl-sci↗

arXiv2011

Spectroscopic mapping of local structural distortions in ferroelectric PbTiO3/SrTiO3 superlattices at the unit-cell scale

The local structural distortions in polydomain ferroelectric PbTiO3/SrTiO3 superlattices are investigated by means of high spatial and energy resolution electron energy loss spectroscopy combined with high angle annular dark field imaging. Local structural variations across the interfaces have been identified with unit cell resolution through the analysis of the energy loss near edge structure of the Ti-L2,3 and O-K edges. Ab-initio and multiplet calculations of the Ti-L2,3 edges provide unambiguous evidence for an inhomogeneous polarization profile associated with the observed structural distortions across the superlattice.

cond-mat.mtrl-sci↗