arXiv subjects

Paweł Ćwiąkała

Publications and source records attributed to Paweł Ćwiąkała.

5 recordsLinked to original sources

arXiv2026

The Impact of Processing Parameters on High-Accuracy Measurements in UAV Photogrammetry

Unmanned aerial vehicle (UAV) photogrammetry is increasingly used in applications requiring high accuracy, such as determining ground surface changes caused by landslides, mining, or microrelief transformation. While acquisition strategies have been widely studied, the influence of the processing workflow-particularly Bundle Block Adjustment parameter settings-remains insufficiently explored. This study addresses this gap through a systematic, full-factorial evaluation of 768 processing variants applied to ten UAV datasets collected over 1.5 years in a 220 ha study area. Eight key parameters were analysed. The results show substantial variability in final 3D accuracy: the best performing variant achieved a root mean square error (RMSE) of 16 mm, whereas the weakest reached 303 mm. The most influential factors were the number of ground control points, the application of additional camera calibration corrections, and the use of the Post-Processing Kinematic GNSS method for determining camera projection center coordinates. The study also evaluates how workflow optimization affects the accuracy of displacement, tilt changes, and horizontal strain determination. While random displacement errors remained stable (RMSE of ~6-7 mm), systematic errors were significantly reduced by over half in all axes, with vertical median absolute error decreasing from 14 mm to 7 mm in the optimized configuration compared to the baseline previously used by the authors. This study provides the first large-scale, practice-oriented assessment of how processing parameter selection shapes the accuracy of both photogrammetric products and deformation indices determination. The results offer actionable guidance for developing more robust and repeatable UAV photogrammetry workflows tailored to high-precision monitoring.

cs.CV↗

arXiv2026

Recognition of Urbanized Areas in UAV-Derived Very-High-Resolution Visible-Light Imagery

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

cs.CV↗

arXiv2026

Determining Vertical Displacement of Agricultural Areas Using UAV-Photogrammetry and a Heteroscedastic Deep Learning Model

This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

cs.CV↗

arXiv2023

Estimation of River Water Surface Elevation Using UAV Photogrammetry and Machine Learning

Unmanned aerial vehicle (UAV) photogrammetry allows for the creation of orthophotos and digital surface models (DSMs) of a terrain. However, DSMs of water bodies mapped with this technique reveal water surface distortions, preventing the use of photogrammetric data for accurate determination of water surface elevation (WSE). Firstly, we propose a new solution in which a convolutional neural network (CNN) is used as a WSE estimator from photogrammetric DSMs and orthophotos. Second, we improved the previously known "water-edge" method by filtering the outliers using a forward-backwards exponential weighted moving average. Further improvement in these two methods was achieved by performing a linear regression of the WSE values against chainage. The solutions estimate the uncertainty of the predictions. This is the first approach in which DL was used for this task. A brand new machine learning data set has been created. It was collected on a small lowland river in winter and summer conditions. It consists of 322 samples, each corresponding to a 10 by 10 meter area of the river channel and adjacent land. Each data set sample contains orthophoto and DSM arrays as input, along with a single ground-truth WSE value as output. The data set was supplemented with data collected by other researchers that compared the state-of-the-art methods for determining WSE using an UAV. The results of the DL solution were verified using k-fold cross-validation method. This provided an in-depth examination of the model's ability to perform on previously unseen data. The WSE RMSEs differ for each k-fold cross-validation subset and range from 1.7 cm up to 17.2 cm. The RMSE results of the improved "water-edge" method are at least six times lower than the RMSE results achieved by the conventional "water-edge" method. The results obtained by new methods are predominantly outperforming existing ones.

cs.LG↗

arXiv2022

Neuroevolution deep learning architecture search for estimation of river surface elevation from photogrammetric Digital Surface Models

Development of the new methods of surface water observation is crucial in the perspective of increasingly frequent extreme hydrological events related to global warming and increasing demand for water. Orthophotos and digital surface models (DSMs) obtained using UAV photogrammetry can be used to determine the Water Surface Elevation (WSE) of a river. However, this task is difficult due to disturbances of the water surface on DSMs caused by limitations of photogrammetric algorithms. In this study, machine learning was used to extract a WSE value from disturbed photogrammetric data. A brand new dataset has been prepared specifically for this purpose by hydrology and photogrammetry experts. The new method is an important step toward automating water surface level measurements with high spatial and temporal resolution. Such data can be used to validate and calibrate of hydrological, hydraulic and hydrodynamic models making hydrological forecasts more accurate, in particular predicting extreme and dangerous events such as floods or droughts. For our knowledge this is the first approach in which dataset was created for this purpose and deep learning models were used for this task. Additionally, neuroevolution algorithm was set to explore different architectures to find local optimal models and non-gradient search was performed to fine-tune the model parameters. The achieved results have better accuracy compared to manual methods of determining WSE from photogrammetric DSMs.

cs.NE↗