Searcharxiv⌕ Search

arXiv subjects

Pedro Marronetti

Publications and source records attributed to Pedro Marronetti.

At least 37 records · Page 2Linked to original sources

Error-analysis and comparison to analytical models of numerical waveforms produced by the NRAR Collaboration

The Numerical-Relativity-Analytical-Relativity (NRAR) collaboration is a joint effort between members of the numerical relativity, analytical relativity and gravitational-wave data analysis communities. The goal of the NRAR collaboration is to produce numerical-relativity simulations of compact binaries and use them to develop accurate analytical templates for the LIGO/Virgo Collaboration to use in detecting gravitational-wave signals and extracting astrophysical information from them. We describe the results of the first stage of the NRAR project, which focused on producing an initial set of numerical waveforms from binary black holes with moderate mass ratios and spins, as well as one non-spinning binary configuration which has a mass ratio of 10. All of the numerical waveforms are analysed in a uniform and consistent manner, with numerical errors evaluated using an analysis code created by members of the NRAR collaboration. We compare previously-calibrated, non-precessing analytical waveforms, notably the effective-one-body (EOB) and phenomenological template families, to the newly-produced numerical waveforms. We find that when the binary's total mass is ~100-200 solar masses, current EOB and phenomenological models of spinning, non-precessing binary waveforms have overlaps above 99% (for advanced LIGO) with all of the non-precessing-binary numerical waveforms with mass ratios <= 4, when maximizing over binary parameters. This implies that the loss of event rate due to modelling error is below 3%. Moreover, the non-spinning EOB waveforms previously calibrated to five non-spinning waveforms with mass ratio smaller than 6 have overlaps above 99.7% with the numerical waveform with a mass ratio of 10, without even maximizing on the binary parameters.

gr-qc↗

Initial data for neutron star binaries with arbitrary spins

The starting point of any general relativistic numerical simulation is a solution of the Hamiltonian and momentum constraints that (ideally) represents an astrophysically realistic scenario. We present a new method to produce initial data sets for binary neutron stars with arbitrary spins and orbital eccentricities. The method only provides approximate solutions to the constraints. However, we show that the corresponding constraint violations subside after a couple of orbits, becoming comparable to those found in evolutions of standard conformally flat, helically symmetric binary initial data. We evolve in time three data sets, corresponding to binaries with spins aligned, zero and anti-aligned with the orbital angular momentum. These simulations show the orbital "hang-up" effect previously seen in binary black holes. Additionally, all three show orbital eccentricities up to one order of magnitude smaller than those found in helically symmetric initial sets evolutions.

gr-qc↗

Axisymmetric Ab Initio Core-Collapse Supernova Simulations of 12-25 M_sol Stars

We present an overview of four ab initio axisymmetric core-collapse supernova simulations employing detailed spectral neutrino transport computed with our CHIMERA code and initiated from Woosley & Heger (2007) progenitors of mass 12, 15, 20, and 25 M_sol. All four models exhibit shock revival over \sim 200 ms (leading to the possibility of explosion), driven by neutrino energy deposition. Hydrodynamic instabilities that impart substantial asymmetries to the shock aid these revivals, with convection appearing first in the 12 M_sol model and the standing accretion shock instability (SASI) appearing first in the 25 M_sol model. Three of the models have developed pronounced prolate morphologies (the 20 M_sol model has remained approximately spherical). By 500 ms after bounce the mean shock radii in all four models exceed 3,000 km and the diagnostic explosion energies are 0.33, 0.66, 0.65, and 0.70 Bethe (B = $10^{51}$ ergs) for the 12, 15, 20, and 25 M_sol models, respectively, and are increasing. The three least massive of our models are already sufficiently energetic to completely unbind the envelopes of their progenitors (i.e., to explode), as evidenced by our best estimate of their explosion energies, which first become positive at 320, 380, and 440 ms after bounce. By 850 ms the 12 M_sol diagnostic explosion energy has saturated at 0.38 B, and our estimate for the final kinetic energy of the ejecta is \sim 0.3 B, which is comparable to observations for lower-mass progenitors.

astro-ph.SR↗

Two- and three-dimensional simulations of core-collapse supernovae with CHIMERA

Ascertaining the core-collapse supernova mechanism is a complex, and yet unsolved, problem dependent on the interaction of general relativity, hydrodynamics, neutrino transport, neutrino-matter interactions, and nuclear equations of state and reaction kinetics. Ab initio modeling of core-collapse supernovae and their nucleosynthetic outcomes requires care in the coupling and approximations of the physical components. We have built our multi-physics CHIMERA code for supernova modeling in 1-, 2-, and 3-D, using ray-by-ray neutrino transport, approximate general relativity, and detailed neutrino and nuclear physics. We discuss some early results from our current series of exploding 2D simulations and our work to perform computationally tractable simulations in 3D using the "Yin-Yang" grid.

astro-ph.SR↗

The NINJA-2 catalog of hybrid post-Newtonian/numerical-relativity waveforms for non-precessing black-hole binaries

The Numerical INJection Analysis (NINJA) project is a collaborative effort between members of the numerical relativity and gravitational wave data analysis communities. The purpose of NINJA is to study the sensitivity of existing gravitational-wave search and parameter-estimation algorithms using numerically generated waveforms, and to foster closer collaboration between the numerical relativity and data analysis communities. The first NINJA project used only a small number of injections of short numerical-relativity waveforms, which limited its ability to draw quantitative conclusions. The goal of the NINJA-2 project is to overcome these limitations with long post-Newtonian - numerical relativity hybrid waveforms, large numbers of injections, and the use of real detector data. We report on the submission requirements for the NINJA-2 project and the construction of the waveform catalog. Eight numerical relativity groups have contributed 63 hybrid waveforms consisting of a numerical portion modelling the late inspiral, merger, and ringdown stitched to a post-Newtonian portion modelling the early inspiral. We summarize the techniques used by each group in constructing their submissions. We also report on the procedures used to validate these submissions, including examination in the time and frequency domains and comparisons of waveforms from different groups against each other. These procedures have so far considered only the $(\ell,m)=(2,2)$ mode. Based on these studies we judge that the hybrid waveforms are suitable for NINJA-2 studies. We note some of the plans for these investigations.

gr-qc↗

Recent Advances in the Numerical Simulations of Binary Black Holes

Since the breakthrough papers from 2005/2006, the field of numerical relativity has experienced a growth spurt that took the two-body problem in general relativity from the category of "really-hard-problems" to the realm of "things-we-know-how-to-do". Simulations of binary black holes in circular orbits, the holy grail of numerical relativity, are now tractable problems that lead to some of the most spectacular results in general relativity in recent years. We cover here some of the latest achievements and highlight the field's next challenges.

gr-qc↗

A Simple method to set up low eccentricity initial data for moving puncture simulations

We introduce two new eccentricity measures to analyze numerical simulations. Unlike earlier definitions these eccentricity measures do not involve any free parameters which makes them easy to use. We show how relatively inexpensive grid setups can be used to estimate the eccentricity during the early inspiral phase. Furthermore, we compare standard puncture data and post-Newtonian data in ADMTT gauge. We find that both use different coordinates. Thus low eccentricity initial momentum parameters for a certain separation measured in ADMTT coordinates are hard to use in puncture data, because it is not known how the separation in puncture coordinates is related to the separation in ADMTT coordinates. As a remedy we provide a simple approach which allows us to iterate the momentum parameters until our numerical simulations result in acceptably low eccentricities.

gr-qc↗

Core Collapse Supernovae using CHIMERA: Gravitational Radiation from Non-Rotating Progenitors

The CHIMERA code is a multi-dimensional multi-physics engine dedicated primarily to the simulation of core collapse supernova explosions. One of the most important aspects of these explosions is their capacity to produce gravitational radiation that is detectable by Earth-based laser-interferometric gravitational wave observatories such as LIGO and VIRGO. We present here preliminary gravitational signatures of two-dimensional models with non-rotating progenitors. These simulations exhibit explosions, which are followed for more than half a second after stellar core bounce.

astro-ph.HE↗

Gravitational Waves from Core Collapse Supernovae

We present the gravitational wave signatures for a suite of axisymmetric core collapse supernova models with progenitors masses between 12 and 25 solar masses. These models are distinguished by the fact they explode and contain essential physics (in particular, multi-frequency neutrino transport and general relativity) needed for a more realistic description. Thus, we are able to compute complete waveforms (i.e., through explosion) based on non-parameterized, first-principles models. This is essential if the waveform amplitudes and time scales are to be computed more precisely. Fourier decomposition shows that the gravitational wave signals we predict should be observable by AdvLIGO across the range of progenitors considered here. The fundamental limitation of these models is in their imposition of axisymmetry. Further progress will require counterpart three-dimensional models.

gr-qc↗

Testing gravitational-wave searches with numerical relativity waveforms: Results from the first Numerical INJection Analysis (NINJA) project

The Numerical INJection Analysis (NINJA) project is a collaborative effort between members of the numerical relativity and gravitational-wave data analysis communities. The purpose of NINJA is to study the sensitivity of existing gravitational-wave search algorithms using numerically generated waveforms and to foster closer collaboration between the numerical relativity and data analysis communities. We describe the results of the first NINJA analysis which focused on gravitational waveforms from binary black hole coalescence. Ten numerical relativity groups contributed numerical data which were used to generate a set of gravitational-wave signals. These signals were injected into a simulated data set, designed to mimic the response of the Initial LIGO and Virgo gravitational-wave detectors. Nine groups analysed this data using search and parameter-estimation pipelines. Matched filter algorithms, un-modelled-burst searches and Bayesian parameter-estimation and model-selection algorithms were applied to the data. We report the efficiency of these search methods in detecting the numerical waveforms and measuring their parameters. We describe preliminary comparisons between the different search methods and suggest improvements for future NINJA analyses.

gr-qc↗

Status of NINJA: the Numerical INJection Analysis project

The 2008 NRDA conference introduced the Numerical INJection Analysis project (NINJA), a new collaborative effort between the numerical relativity community and the data analysis community. NINJA focuses on modeling and searching for gravitational wave signatures from the coalescence of binary system of compact objects. We review the scope of this collaboration and the components of the first NINJA project, where numerical relativity groups shared waveforms and data analysis teams applied various techniques to detect them when embedded in colored Gaussian noise.

gr-qc↗

The final mass and spin of black hole mergers

We consider black holes resulting from binary black hole mergers. By fitting to numerical results we construct analytic formulas that predict the mass and spin of the final black hole. Our formulas are valid for arbitrary initial spins and mass ratios and agree well with available numerical simulations. We use our spin formula in the context of two common merger scenarios for supermassive galactic black holes. We consider the case of isotropically distributed initial spin orientations (when no surrounding matter is present) and also the case when matter closely aligns the spins with the orbital angular momentum. The spin magnitude of black holes resulting from successive generations of mergers (with symmetric mass ratio $η$) has a mean of $1.73η+ 0.28$ in the isotropic case and 0.94 for the closely aligned case.

gr-qc↗

High-spin binary black hole mergers

We study identical mass black hole binaries with spins perpendicular to the binary's orbital plane. These binaries have individual spins ranging from $s/m^2=-0.90$ to 0.90, ($s_1 = s_2$ in all cases) which is near the limit possible with standard Bowen-York puncture initial data. The extreme cases correspond to the largest initial spin simulations to date. Our results expand the parameter space covered by Rezzolla {\it et al.} and, when combining both data sets, we obtain estimations for the minimum and maximum values for the intrinsic angular momenta of the remnant of binary black hole mergers of $J/M^2=0.341 \pm 0.004$ and $0.951 \pm 0.004$ respectively. Note, however, that these values are reached through extrapolation to the singular cases $|s_1| = |s_2| = 1$ and thus remain as {\it estimates} until full-fledged numerical simulations provide confirmation.

gr-qc↗

Binary black holes on a budget: Simulations using workstations

Binary black hole simulations have traditionally been computationally very expensive: current simulations are performed in supercomputers involving dozens if not hundreds of processors, thus systematic studies of the parameter space of binary black hole encounters still seem prohibitive with current technology. Here we show how the multi-layered refinement level code BAM can be used on dual processor workstations to simulate certain binary black hole systems. BAM, based on the moving punctures method, provides grid structures composed of boxes of increasing resolution near the center of the grid. In the case of binaries, the highest resolution boxes are placed around each black hole and they track them in their orbits until the final merger when a single set of levels surrounds the black hole remnant. This is particularly useful when simulating spinning black holes since the gravitational fields gradients are larger. We present simulations of binaries with equal mass black holes with spins parallel to the binary axis and intrinsic magnitude of S/m^2= 0.75. Our results compare favorably to those of previous simulations of this particular system. We show that the moving punctures method produces stable simulations at maximum spatial resolutions up to M/160 and for durations of up to the equivalent of 20 orbital periods.

gr-qc↗

Binary black hole mergers: large kicks for generic spin orientations

We present results from several simulations of equal mass black holes with spin. The spin magnitudes are $S/m^2=0.8$ in all cases, but we vary the spin orientations arbitrarily, in and outside the orbital plane. We find that in all but one case the final merged black hole acquires a kick of more than 1000 km/s, indicating that kicks of this magnitude are likely to be generic and should be expected for mergers with general spin orientations. The maximum kick velocity we find is 2500 km/s and occurs for initial spins which are anti-aligned in the initial orbital plane.

gr-qc↗

Constraint Relaxation

Full relativistic simulations in three dimensions are known to develop runaway modes that grow exponentially and are accompanied by violations of the Hamiltonian and momentum constraints. We present here a method that controls the violation of these constraints and is tested with simulations of binary neutron stars in circular orbits. We show that this technique improves the overall quality of the simulations.

gr-qc↗

Momentum constraint relaxation

Full relativistic simulations in three dimensions invariably develop runaway modes that grow exponentially and are accompanied by violations of the Hamiltonian and momentum constraints. Recently, we introduced a numerical method (Hamiltonian relaxation) that greatly reduces the Hamiltonian constraint violation and helps improve the quality of the numerical model. We present here a method that controls the violation of the momentum constraint. The method is based on the addition of a longitudinal component to the traceless extrinsic curvature generated by a vector potential w_i, as outlined by York. The components of w_i are relaxed to solve approximately the momentum constraint equations, pushing slowly the evolution toward the space of solutions of the constraint equations. We test this method with simulations of binary neutron stars in circular orbits and show that effectively controls the growth of the aforementioned violations. We also show that a full numerical enforcement of the constraints, as opposed to the gentle correction of the momentum relaxation scheme, results in the development of instabilities that stop the runs shortly.

gr-qc↗

Hamiltonian Relaxation

Due to the complexity of the required numerical codes, many of the new formulations for the evolution of the gravitational fields in numerical relativity are not tested on binary evolutions. We introduce in this paper a new testing ground for numerical methods based on the simulation of binary neutron stars. This numerical setup is used to develop a new technique, the Hamiltonian relaxation (HR), that is benchmarked against the currently most stable simulations based on the BSSN method. We show that, while the length of the HR run is somewhat shorter than the equivalent BSSN simulation, the HR technique improves the overall quality of the simulation, not only regarding the satisfaction of the Hamiltonian constraint, but also the behavior of the total angular momentum of the binary. The latest quantity agrees well with post-Newtonian estimations for point-mass binaries in circular orbits.

gr-qc↗