arXiv subjects

Peichen Zhong

Publications and source records attributed to Peichen Zhong.

At least 19 recordsLinked to original sources

arXiv2026

Interfacial-melt stability as a thermodynamic prerequisite for solid-state synthesis

Computational materials discovery commonly ranks candidate materials by their thermodynamic stability on the formation energy convex hull, yet many predicted-stable phases resist synthesis. We propose that solid-state synthesizability through interfacial-melt-mediated routes requires an additional thermodynamic condition: the interfacial melt at the target composition must itself remain locally stable against spinodal decomposition. We demonstrate this in the classical Fe--B system, where thermodynamically stable FeB$_4$ has been reported under high-pressure synthesis but not in low-pressure synthesis attempts. Using melt--quench molecular dynamics driven by a fine-tuned machine-learning interatomic potential, we find that, at ambient pressure, the B-rich interfacial melt near the FeB$_4$ composition develops a concave free-energy landscape, signaling a demixing instability that is corroborated by the concentration--concentration structure factor and correlated with low-energy icosahedral and pentagonal-pyramidal boron motifs. Applied pressure introduces a convex $PV$ contribution that restores melt stability, consistent with the experimental synthesis boundary. Interfacial-melt stability, which atomistic simulations can assess via structure-factor divergence, is thus proposed as a practical thermodynamic screening descriptor of synthesizability for AI-assisted materials discovery.

cond-mat.mtrl-sci↗

arXiv2026

Atomistic Modeling of Chemical Disorder in Materials: Bridging Conventional Methods and AI-Assisted Approaches

Chemical disorder, originating from the mixed occupation of crystallographic sites by multiple elements, is widespread in alloys, ceramics, and compositionally complex materials, where short- and long-range orderings strongly influence properties. A central obstacle is the representation gap between experiments and simulations: experiments often report disorder as partial occupancies and ensemble-averaged behaviors, whereas atomistic simulations and AI workflows usually require fully specified configurations. Tackling this gap requires computational methods that convert averaged disorder descriptions into representative configurational ensembles while balancing cost, bias, and fidelity. This challenge has become more urgent in AI-driven computational discovery, where ignoring disorder may cause AI workflows to misrank stability, misjudge novelty, and misdirect experiments with too-idealized representations. This Review highlights how conventional and AI-driven methods can bridge this representation gap. We assess the strengths and limitations of approaches spanning mean-field theories, cluster expansion, quasi-random approximations, Monte Carlo, and emerging schemes powered by universal interatomic potentials and generative models. We further highlight how AI can accelerate various computational schemes by lowering the cost of microstate evaluation, configurational exploration, and atomistic-to-thermodynamic closure. We also emphasize how AI can enable disorder-native capabilities, including workflow triage, ordering-sensitive and alchemical representations, generative models of disordered structures and distributions, and kinetics-aware disorder prediction. Together, this framework outlines a practical roadmap toward disorder-native AI, which can transform chemical disorder from a representational obstacle into a controllable variable for realistic AI-accelerated materials discovery.

cond-mat.mtrl-sci↗

arXiv2026

Differentiable hybrid force fields support scalable autonomous electrolyte discovery

Autonomous electrolyte discovery demands a computational engine that satisfies a critical trilemma: it must be fast enough for high-throughput screening, accurate enough for quantitative property prediction, and calibratable enough for online refinement. Classical empirical force fields (FFs) are fast but rely on error cancellation, while standard machine learning interatomic potentials (MLIPs) are computationally expensive. In this Perspective, we highlight that differentiable hybrid FFs resolve this trilemma by fusing physically motivated functional forms with neural-network short-range corrections. Grounded in Energy Decomposition Analysis (EDA), state-of-the-art models such as PhyNEO-Electrolyte and ByteFF-Pol achieve zero-shot generalization to bulk phases, delivering throughputs on the order of tens of ns/day (up to $\sim$50 ns/day, depending on model complexity) for 10,000-atom systems. Crucially, their physical skeletons provide a well-conditioned parameter space for differentiable molecular dynamics (dMD). This enables a dual-calibration paradigm: bottom-up \textit{ab initio} parameterization combined with top-down fine-tuning from macroscopic experimental observables. We propose that this architecture meets the requirements of a ``ChemRobot-ready'' digital twin by integrating physics-grounded simulation with experimentally calibratable refinement, thereby enabling closed-loop autonomous electrolyte discovery.

cond-mat.mtrl-sci↗

arXiv2025

Intrinsic structure of relaxor ferroelectrics from first principles

We develop FIRE-Swap, a first-principles framework for sampling intrinsic compositional structures in complex perovskites with machine-learning interatomic potentials (MLIPs). Using both dedicated and universal MLIPs, we study the relaxor lead magnesium niobate (PMN) and the solid solutions lead zirconate titanate (PZT) and lead strontium titanate (PST). Across MLIP models and exchange-correlation approximations, FIRE-Swap robustly predicts a rock-salt-like chemical order in PMN, which is absent in PZT and PST with the same mixing ratio, consistent with experiments. We further identify in PMN a distinct Nb-cluster morphology. Interconnected, non-coarsened polar nanoregions are found within Nb clusters, providing a mesoscale basis for understanding relaxor ferroelectricity.

cond-mat.mtrl-sci↗

arXiv2025

Benchmarking foundation potentials against quantum chemistry methods for predicting molecular redox potentials

Computational high-throughput virtual screening is essential for identifying redox-active molecules for sustainable applications such as electrochemical carbon capture. A primary challenge in this approach is the high computational cost associated with accurate quantum chemistry calculations. Machine learning foundation potentials (FPs) trained on extensive density functional theory (DFT) calculations offer a computationally efficient alternative. Here, we benchmark the MACE-OMol-0 and UMA FPs against a hierarchy of DFT functionals for predicting experimental molecular redox potentials for both electron transfer (ET) and proton-coupled electron transfer (PCET) reactions. We find that these FPs achieve exceptional accuracy for PCET processes, rivaling their target DFT method. However, the performance is diminished for ET reactions, particularly for multi-electron transfers involving reactive ions that are underrepresented in the OMol25 training data, revealing a key out-of-distribution limitation. To overcome this, we propose an optimal hybrid workflow that uses the FPs for efficient geometry optimization and thermochemical analysis, followed by a crucial single-point DFT energy refinement and an implicit solvation correction. This pragmatic approach provides a robust and scalable strategy for accelerating high-throughput virtual screening in sustainable chemistry.

physics.chem-ph↗

arXiv2025

Machine-Learning-Guided Insights into Solid-Electrolyte Interphase Conductivity: Are Amorphous Lithium Fluorophosphates the Key?

Despite decades of study, the identity of the dominant \ce{Li+}-conducting phase within the inorganic SEI of Li-ion batteries remains unresolved. While the mosaic model describes LiF/\ce{Li2O}/\ce{Li2CO3} nanocrystallites within a disordered matrix, these crystalline phases inherently offer limited ionic conductivity. Growing evidence suggests that interfaces, grain boundaries, and amorphous phases may instead host the primary fast-ion pathways. Using diffusion-based generative structure prediction and machine-learning interatomic potentials (MLIPs), we investigate lithium difluorophosphate (\ce{LiPO2F2}), a key mixed-anion decomposition product of phosphorus- and fluorine-containing electrolytes. We identify a stable crystalline polymorph and demonstrate that the amorphous counterpart is conductive, with projected room-temperature $\sigma \approx 0.18$ mS cm$^{-1}$ and $E_\mathrm{a} \approx 0.40$ eV. This enhancement stems from structural disorder flattening the Li site-energy landscape and a low formation energy for Li-interstitial defects, which supplies additional mobile carriers. We propose amorphous mixed-anion Li--P--O--F phases as a promising conducting medium in the SEI, offering a specific target for engineering improved battery interfaces.

cond-mat.mtrl-sci↗

arXiv2025

A universal augmentation framework for long-range electrostatics in machine learning interatomic potentials

Most current machine learning interatomic potentials (MLIPs) rely on short-range approximations, without explicit treatment of long-range electrostatics. To address this, we recently developed the Latent Ewald Summation (LES) method, which infers electrostatic interactions, polarization, and Born effective charges (BECs), just by learning from energy and force training data. Here, we present LES as a standalone library, compatible with any short-range MLIP, and demonstrate its integration with methods such as MACE, NequIP, CACE, and CHGNet. We benchmark LES-enhanced models on distinct systems, including bulk water, polar dipeptides, and gold dimer adsorption on defective substrates, and show that LES not only captures correct electrostatics but also improves accuracy. Additionally, we scale LES to large and chemically diverse data by training MACELES-OFF on the SPICE set containing molecules and clusters, making a universal MLIP with electrostatics for organic systems including biomolecules. MACELES-OFF is more accurate than its short-range counterpart (MACE-OFF) trained on the same dataset, predicts dipoles and BECs reliably, and has better descriptions of bulk liquids. By enabling efficient long-range electrostatics without directly training on electrical properties, LES paves the way for electrostatic foundation MLIPs.

physics.chem-ph↗

arXiv2025

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure ($\delta$-phase) during electrochemical cycling. In this computational study, we used charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in Li$_{x}$Mn$_{0.8}$Ti$_{0.1}$O$_{1.9}$F$_{0.1}$. Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of non-transition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn$^{2+}$ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the $\delta$-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine learning interatomic potentials for understanding complex oxide materials.

cond-mat.mtrl-sci↗

arXiv2025

Crystal structure prediction with host-guided inpainting generation and foundation potentials

Unconditional crystal structure generation with diffusion models faces challenges in identifying symmetric crystals as the unit cell size increases. We present the Crystal Host-Guided Generation (CHGGen) framework to address this challenge through conditional generation using an inpainting method, which optimizes a fraction of atomic positions within a predefined and symmetrized host structure to improve the success rate for symmetric structure generation. By integrating inpainting structure generation with a foundation potential for structure optimization, we demonstrate the method on the ZnS-P$_2$S$_5$ and Li-Si chemical systems, where the inpainting method generates a higher fraction of symmetric structures than unconditional generation. The practical significance of CHGGen extends to enabling the structural modification of crystal structures, particularly for systems with partial occupancy or intercalation chemistry. The inpainting method also allows for seamless integration with other generative models, providing a versatile framework for accelerating materials discovery.

cond-mat.mtrl-sci↗

arXiv2025

Machine learning interatomic potential can infer electrical response

Modeling the response of material and chemical systems to electric fields remains a longstanding challenge. Machine learning interatomic potentials (MLIPs) offer an efficient and scalable alternative to quantum mechanical methods but do not by themselves incorporate electrical response. Here, we show that polarization and Born effective charge (BEC) tensors can be directly extracted from long-range MLIPs within the Latent Ewald Summation (LES) framework, solely by learning from energy and force data. Using this approach, we predict the infrared spectra of bulk water under zero or finite external electric fields, ionic conductivities of high-pressure superionic ice, and the phase transition and hysteresis in ferroelectric PbTiO$_3$ perovskite. This work thus extends the capability of MLIPs to predict electrical response--without training on charges or polarization or BECs--and enables accurate modeling of electric-field-driven processes in diverse systems at scale.

cond-mat.mtrl-sci↗

arXiv2025

Cross-functional transferability in universal machine learning interatomic potentials

The rapid development of universal machine learning interatomic potentials (uMLIPs) has demonstrated the possibility for generalizable learning of the universal potential energy surface. In principle, the accuracy of uMLIPs can be further improved by bridging the model from lower-fidelity datasets to high-fidelity ones. In this work, we analyze the challenge of this transfer learning problem within the CHGNet framework. We show that significant energy scale shifts and poor correlations between GGA and r$^2$SCAN pose challenges to cross-functional data transferability in uMLIPs. By benchmarking different transfer learning approaches on the MP-r$^2$SCAN dataset of 0.24 million structures, we demonstrate the importance of elemental energy referencing in the transfer learning of uMLIPs. By comparing the scaling law with and without the pre-training on a low-fidelity dataset, we show that significant data efficiency can still be achieved through transfer learning, even with a target dataset of sub-million structures. We highlight the importance of proper transfer learning and multi-fidelity learning in creating next-generation uMLIPs on high-fidelity data.

cond-mat.mtrl-sci↗

arXiv2025

Foundation Models for Atomistic Simulation of Chemistry and Materials

Given the power of large language and large vision models, it is of profound and fundamental interest to ask if a foundational model based on data and parameter scaling laws and pre-training strategies is possible for learned simulations of chemistry and materials. The scaling of large and diverse datasets and highly expressive architectures for chemical and materials sciences should result in a foundation model that is more efficient and broadly transferable, robust to out-of-distribution challenges, and easily fine-tuned to a variety of downstream observables, when compared to specific training from scratch on targeted applications in atomistic simulation. In this Perspective we aim to cover the rapidly advancing field of machine learned interatomic potentials (MLIP), and to illustrate a path to create chemistry and materials MLIP foundation models at larger scale.

physics.chem-ph↗

arXiv2025

MatLLMSearch: Crystal Structure Discovery with Evolution-Guided Large Language Models

Crystal structure generation is fundamental to materials science, enabling the discovery of novel materials with desired properties. While existing approaches leverage Large Language Models (LLMs) through extensive fine-tuning on materials databases, we show that pre-trained LLMs can inherently generate novel and stable crystal structures without additional fine-tuning. Our framework employs LLMs as intelligent proposal agents within an evolutionary pipeline that guides them to perform implicit crossover and mutation operations while maintaining chemical validity. We demonstrate that MatLLMSearch achieves a 78.38% metastable rate validated by machine learning interatomic potentials and 31.7% DFT-verified stability, outperforming specialized models such as CrystalTextLLM. Beyond crystal structure generation, we further demonstrate that our framework adapts to diverse materials design tasks, including crystal structure prediction and multi-objective optimization of properties such as deformation energy and bulk modulus, all without fine-tuning. These results establish our framework as a versatile and effective framework for consistent high-quality materials discovery, offering training-free generation of novel stable structures with reduced overhead and broader accessibility.

cond-mat.mtrl-sci↗

arXiv2025

Origin of Enhanced Performance when Mn-Rich Rocksalt Cathodes transform to $\delta$-DRX

Most Mn-rich cathodes are known to undergo phase transformation into structures resembling spinel-like ordering upon electrochemical cycling. Recently, the irreversible transformation of Ti-containing Mn-rich disordered rock-salt cathodes into a phase -- named $\delta$ -- with nanoscale spinel-like domains has been shown to increase energy density, capacity retention, and rate capability. However, the nature of the boundaries between domains and their relationship with composition and electrochemistry are not well understood. In this work, we discuss how the transformation into the multi-domain structure results in eight variants of Spinel domains, which is crucial for explaining the nanoscale domain formation in the $\delta$-phase. We study the energetics of crystallographically unique boundaries and the possibility of Li-percolation across them with a fine-tuned CHGNet machine learning interatomic potential. Energetics of $16d$ vacancies reveal a strong affinity to segregate to the boundaries, thereby opening Li-pathways at the boundary to enhance long-range Li-percolation in the $\delta$ structure. Defect calculations of the relatively low-mobility Ti show how it can influence the extent of Spinel ordering, domain morphology and size significantly; leading to guidelines for engineering electrochemical performance through changes in composition.

cond-mat.mtrl-sci↗

arXiv2024

Learning charges and long-range interactions from energies and forces

Accurate modeling of long-range forces is critical in atomistic simulations, as they play a central role in determining the properties of materials and chemical systems. However, standard machine learning interatomic potentials (MLIPs) often rely on short-range approximations, limiting their applicability to systems with significant electrostatics and dispersion forces. We recently introduced the Latent Ewald Summation (LES) method, which captures long-range electrostatics without explicitly learning atomic charges or charge equilibration. Extending LES, we incorporate the ability to learn physical partial charges, encode charge states, and the option to impose charge neutrality constraints. We benchmark LES on diverse and challenging systems, including charged molecules, ionic liquid, electrolyte solution, polar dipeptides, surface adsorption, electrolyte/solid interfaces, and solid-solid interfaces. Our results show that LES can effectively infer physical partial charges, dipole and quadrupole moments, as well as achieve better accuracy compared to methods that explicitly learn charges. LES thus provides an efficient, interpretable, and generalizable MLIP framework for simulating complex systems with intricate charge transfer and long-range

physics.comp-ph↗

arXiv2024

Overcoming systematic softening in universal machine learning interatomic potentials by fine-tuning

Machine learning interatomic potentials (MLIPs) have introduced a new paradigm for atomic simulations. Recent advancements have seen the emergence of universal MLIPs (uMLIPs) that are pre-trained on diverse materials datasets, providing opportunities for both ready-to-use universal force fields and robust foundations for downstream machine learning refinements. However, their performance in extrapolating to out-of-distribution complex atomic environments remains unclear. In this study, we highlight a consistent potential energy surface (PES) softening effect in three uMLIPs: M3GNet, CHGNet, and MACE-MP-0, which is characterized by energy and force under-prediction in a series of atomic-modeling benchmarks including surfaces, defects, solid-solution energetics, phonon vibration modes, ion migration barriers, and general high-energy states. We find that the PES softening behavior originates from a systematic underprediction error of the PES curvature, which derives from the biased sampling of near-equilibrium atomic arrangements in uMLIP pre-training datasets. We demonstrate that the PES softening issue can be effectively rectified by fine-tuning with a single additional data point. Our findings suggest that a considerable fraction of uMLIP errors are highly systematic, and can therefore be efficiently corrected. This result rationalizes the data-efficient fine-tuning performance boost commonly observed with foundational MLIPs. We argue for the importance of a comprehensive materials dataset with improved PES sampling for next-generation foundational MLIPs.

cond-mat.mtrl-sci↗

arXiv2024

Deep learning of experimental electrochemistry for battery cathodes across diverse compositions

Artificial intelligence (AI) has emerged as a tool for discovering and optimizing novel battery materials. However, the adoption of AI in battery cathode representation and discovery is still limited due to the complexity of optimizing multiple performance properties and the scarcity of high-fidelity data. In this study, we present a machine-learning model (DRXNet) for battery informatics and demonstrate the application in the discovery and optimization of disordered rocksalt (DRX) cathode materials. We have compiled the electrochemistry data of DRX cathodes over the past five years, resulting in a dataset of more than 19,000 discharge voltage profiles on diverse chemistries spanning 14 different metal species. Learning from this extensive dataset, our DRXNet model can automatically capture critical features in the cycling curves of DRX cathodes under various conditions. Illustratively, the model gives rational predictions of the discharge capacity for diverse compositions in the Li--Mn--O--F chemical space as well as for high-entropy systems. As a universal model trained on diverse chemistries, our approach offers a data-driven solution to facilitate the rapid identification of novel cathode materials, accelerating the development of next-generation batteries for carbon neutralization.

cond-mat.mtrl-sci↗

arXiv2024

Effect of cation-disorder on lithium transport in halide superionic conductors

Li$_2$ZrCl$_6$ (LZC) is a promising solid-state electrolyte due to its affordability, moisture stability, and high ionic conductivity. We computationally investigate the role of cation disorder in LZC and its effect on Li-ion transport by integrating thermodynamic and kinetic modeling. The results demonstrate that fast Li-ion conductivity requires Li/vacancy disorder, which is dependent on the degree of Zr disorder. The high temperature required to form equilibrium Zr-disorder precludes any equilibrium synthesis processes for achieving fast Li-ion conductivity, rationalizing why only non-equilibrium synthesis methods, such as ball milling, lead to good conductivity. Our simulations show that Zr disorder lowers the Li/vacancy order-disorder transition temperature, which is necessary for creating high Li diffusivity at room temperature. These insights raise a challenge for the large-scale production of these materials and the potential for the long-term stability of their properties.

cond-mat.mtrl-sci↗