arXiv subjects

Peizhi Lu

Publications and source records attributed to Peizhi Lu.

4 recordsLinked to original sources

arXiv2025

Performance of plastic scintillator modules for top veto tracker at Taishan Antineutrino Observatory

The Taishan Antineutrino Observatory (TAO) experiment incorporates a top veto tracker (TVT) system comprising 160 modules, each composed of plastic scintillator (PS) strips, embedded wavelength shifting fibers (WLS-fibers), and silicon photomultipliers (SiPMs). This article highlights the performance of all produced modules following the production and readout/trigger design, providing insights for scintillation detectors with WLS-fibers. Three kinds of trigger modes and its efficiency have been defined to comprehensively evaluate the performance of this unique design, which has been verified for the batch production, along with comprehensive measurement strategies and quality inspection methods. In "module" mode, the detection(tagging) efficiency of the PS exceeds 99.67\% at a 30 photoelectron threshold, and even in "AND" mode, it surpasses 99.60\% at a 15 photoelectron threshold. The muon tagging efficiency meets TAO's requirements. The production and performance of the PS module set a benchmark for other experiments, with optimized optical fiber arrangements that enhance light yield and muon detection efficiency.

physics.ins-det↗

arXiv2023

Design optimization of JUNO-TAO plastic scintillator with WLS-fiber and SiPM readout

Plastic scintillators (PSs)embedded with wavelength-shifting fibers are widely used in high-energy particle physics, such as in muon taggers,as well as in medical physics and other applications. In this study,a simulation package was built to evaluate the effects of the diameter and layout of optical fibers on the light yield with different configurations. The optimal optical configuration was designed based on simulations and validated using two PS prototypes under certain experimental conditions. Atop veto tracker (TVT) for the JUNO-TAO experiment, comprising four layers of 160 strips of PS, was designed and evaluated. The threshold was evaluated when the muon tagging efficiency of a PS strip was >99%. The efficiency of three layer out of four layer of TVT is >99%,even with a tagging efficiency of a single strip as low as 97%, using a threshold of 10 photoelectrons and assuming a 40%silicon PM photon detection efficiency.

physics.ins-det↗

arXiv2022

Performance of compact plastic scintillator strips with WLS-fiber and PMT/SiPM readout

This work presents the design and performance study of compact strips of plastic scintillator with WLS-fiber readout in a dimension of 0.1 * 0.02 * 2 m3, which evaluates as a candidate for cosmic-ray muon detector for JUNO-TAO. The strips coupling with 3-inch PMTs are measured and compared between the single-end and double-end readout options first, and the strip of double-end option coupling with SiPM is further measured and compared with the results of that with the PMTs. The performance of the strips determined by a detailed survey along their length with cosmic-ray muon after a detailed characterization of the used 3-inch PMTs and SiPMs.The proposed compact strip of plastic scintillator with WLS-fiber coupling with SiPM provides a good choice for cosmic-ray muon veto detector for limited detector dimension in particular.

physics.ins-det↗

arXiv2022

Calibration Strategy of the JUNO-TAO Experiment

The Taishan Antineutrino Observatory (JUNO-TAO, or TAO) is a satellite detector for the Jiangmen Underground Neutrino Observatory (JUNO). Located near the Taishan reactor, TAO independently measures the reactor's antineutrino energy spectrum with unprecedented energy resolution. To achieve this goal, energy response must be well calibrated. Using the Automated Calibration Unit (ACU) and the Cable Loop System (CLS) of TAO, multiple radioactive sources are deployed to various positions in the detector to perform a precise calibration of energy response. The non-linear energy response can be controlled within 0.6% with different energy points of these radioactive sources. It can be further improved by using $^{12}\rm B$ decay signals produced by cosmic muons. Through the energy non-uniformity calibration, residual non-uniformity is less than 0.2%. The energy resolution degradation and energy bias caused by the residual non-uniformity can be controlled within 0.05% and 0.3%, respectively. In addition, the stability of other detector parameters, such as the gain of each silicon photo-multiplier, can be monitored with a special ultraviolet LED calibration system.

physics.ins-det↗