SearcharxivSearch

arXiv subjects

Pekka Alitalo

Publications and source records attributed to Pekka Alitalo.

At least 19 recordsLinked to original sources

On the Minimal Scattering Response of PEC Cylinders in a Dielectric Cloak

Recently, it was shown that an infinite perfectly conducting (PEC) cylinder can be nearly perfectly cloaked from normally incident electromagnetic waves using a single-layer homogeneous dielectric cladding. Here we study the electromagnetic response of such structures with the goal to understand the main mechanisms underpinning this cloaking phenomenon. We introduce a simple model of the cloaked PEC cylinder, replacing it by an omnidirectional electric-line scatterer and a bipolar magnetic one; accordingly, the far field is determined in a compact closed form. The analysis of the results shows that the optimal cloaking regime corresponds to the frequency point where the total electric moment is drastically mitigated and thus the radiation pattern of the device resembles that of a magnetic-dipole line. In the vicinity of the optimal cloaking frequency we observe the response close to that of Huygens' pairs of electric and magnetic line scatterers.

math-ph

Electromagnetic cloaking of cylindrical objects by multilayer or uniform dielectric claddings

We show that dielectric or even perfectly conducting cylinders can be cloaked by a uniform or a layered dielectric cladding, without the need of any exotic or magnetic material parameters. In particular, we start by presenting a simple analytical concept that can accurately describe the cloaking effect obtained with conical silver plates in the visible spectrum. The modeled structure has been originally presented in [S. A. Tretyakov, P. Alitalo, O. Luukkonen, C. R. Simovski, Phys. Rev. Lett., vol. 103, p. 103905, 2009], where its operation as a cloak in the optical frequencies was studied only numerically. We model rigorously this configuration as a multi-layer dielectric cover surrounding the cloaked object, with excellent agreement to the simulation results of the actual device. The concept of using uniform or multilayer dielectric covers, with relative permittivities larger than unity, is then successfully extended to cloaking of impenetrable objects such as conducting cylinders.

physics.class-ph

Bistatic scattering characterization of a three-dimensional broadband cloaking structure

Here we present the results of full experimental characterization of broadband cloaking of a finite-sized metallic cylinder at X-band. The cloaking effect is characterized by measuring the bistatic scattering patterns of uncloaked and cloaked objects in free space and then comparing these with each other. The results of the measurements demonstrate a broadband cloaking effect and are in good agreement with numerical predictions.

physics.class-ph

Nonlinear transformation optics and engineering of the Kerr effect

The concept of transformation optics is extended to nonlinear electrodynamics. It is shown that transformation optics favors implicit constitutive relations in terms of energy densities D.E and B.H rather than E^2 and H^2. The Kerr nonlinearity is studied in detail and the transformation optics based engineering of self-interaction effects is discussed. As a specific example we introduce transformation optics applied on a self-focusing field configuration.

physics.optics

Experimental characterization of a broadband transmission-line cloak in free space

The cloaking efficiency of a finite-size cylindrical transmission-line cloak operating in the X-band is verified with bistatic free space measurements. The cloak is designed and optimized with numerical full-wave simulations. The reduction of the total scattering width of a metal object, enabled by the cloak, is clearly observed from the bistatic free space measurements. The numerical and experimental results are compared resulting in good agreement with each other.

physics.class-ph

Cloaking a metal object from an electromagnetic pulse: A comparison between various cloaking techniques

Electromagnetic cloaks are devices that can be used to reduce the total scattering cross section of various objects. An ideal cloak removes all scattering from an object and thus makes this object "invisible" to the electromagnetic fields that impinge on the object. However, ideal cloaking appears to be possible only at a single frequency. To study cloaking from an electromagnetic pulse we consider propagation of a pulse inside a waveguide with a cloaked metal object inside. There are several ways to achieve cloaking and in this paper we study three such methods, namely, the coordinate-transformation cloak, the transmission-line cloak, and the metal-plate cloak. In the case of the two last cloaks, pulse propagation is studied using experimental data whereas the coordinate-transformation cloak is studied with numerical simulations. The results show that, at least in the studied cases where the cloaked object's diameter is smaller than the wavelength, the cloaks based on transmission-line meshes and metal plates have wider bandwidth than the coordinate-transformation cloak.

physics.optics

Broadband cloaking with volumetric structures composed of two-dimensional transmission-line networks

The cloaking performance of two microwave cloaks, both based on the recently proposed transmission-line approach, are studied using commercial full-wave simulation software. The cloaks are shown to be able to reduce the total scattering cross sections of metallic objects of some restricted shapes and sizes. One of the studied cloaks is electrically small in diameter, and the other is electrically large, with the diameter equal to several wavelengths.

physics.optics

Experimental verification of broadband cloaking using a volumetric cloak composed of periodically stacked cylindrical transmission-line networks

Cloaking using a volumetric structure composed of stacked two-dimensional transmission-line networks is verified with measurements. The measurements are done in a waveguide, in which an array of metallic cylinders is inserted causing a short-circuit in the waveguide. The metal cylinders are cloaked using a previously designed and simulated cloak that hides the cylinders and thus enables wave propagation inside the waveguide.

physics.optics

Subwavelength microscope that uses frequency scanning for image reconstruction

A new principle of subwavelength imaging based on frequency scanning is considered. It is shown that it is possible to reconstruct the spatial profile of an external field exciting an array (or coupled arrays) of subwavelength-sized resonant particles with a frequency scan over the whole band of resonating array modes. During the scan it is enough to measure and store the values of the near field at one or at most two points. After the scan the distribution of the near field can be reconstructed with simple post-processing. The proposed near-field microscope has no moving parts.

physics.optics

Generalized field-transforming metamaterials

In this paper we introduce a generalized concept of field-transforming metamaterials, which perform field transformations defined as linear relations between the original and transformed fields. These artificial media change the fields in a prescribed fashion in the volume occupied by the medium. We show what electromagnetic properties of transforming medium are required. The coefficients of these linear functions can be arbitrary scalar functions of position and frequency, which makes the approach quite general and opens a possibility to realize various unusual devices.

physics.optics

A microwave transmission-line network guiding electromagnetic fields through a dense array of metallic objects

We present measurements of a transmission-line network, designed for cloaking applications in the microwave region. The network is used for channelling microwave energy through an electrically dense array of metal objects, which is basically impenetrable to the impinging electromagnetic radiation. With the designed transmission-line network the waves emitted by a source placed in an air-filled waveguide, are coupled into the network and guided through the array of metallic objects. Our goal is to illustrate the simple manufacturing, assembly, and the general feasibility of these types of cloaking devices.

physics.optics

Impedance-matched microwave lens

A microwave lens with highly reduced reflectance, as compared to conventional dielectric lenses, is proposed. The lens is based on two-dimensional or three-dimensional transmission-line networks that can be designed to have an effective refractive index larger than one, while having almost perfect impedance matching with free space. The design principles are presented and an example lens is studied using commercial simulation software.

physics.optics

A three-dimensional backward-wave network matched with free space

A backward-wave slab based on a capacitively and inductively loaded three-dimensional transmission-line network is designed in such a way that impedance-matching with free space is obtained. To enable field propagation from free space to the network and vice versa, the use of a transition layer is proposed. Matching of the designed network with free space and negative refraction occurring at the slab interfaces are confirmed with full-wave simulations.

physics.gen-ph

Transmission-line networks cloaking objects from electromagnetic fields

We consider a novel method of cloaking objects from the surrounding electromagnetic fields in the microwave region. The method is based on transmission-line networks that simulate the wave propagation in the medium surrounding the cloaked object. The electromagnetic fields from the surrounding medium are coupled into the transmission-line network that guides the waves through the cloak thus leaving the cloaked object undetected. The cloaked object can be an array or interconnected mesh of small inclusions that fit inside the transmission-line network.

physics.class-ph

Subwavelength resolution with three-dimensional isotropic transmission-line lenses

Dispersion, impedance matching and resolution characteristics of an isotropic three-dimensional flat lens ("superlens") are studied. The lens is based on cubic meshes of interconnected transmission lines and bulk loads. We study a practical realization of the lens, based on the microstrip technology. The dispersion equations that have been previously derived, are verified with full-wave simulations. The isotropy of the structure is verified with analytical as well as simulation results. The resolution characteristics of a practically realizable, lossy lens are studied analytically.

physics.optics

On Impedance Bandwidth of Resonant Patch Antennas Implemented Using Structures with Engineered Dispersion

We consider resonant patch antennas, implemented using loaded transmission-line networks and other exotic structures having engineered dispersion. An analytical expression is derived for the ratio of radiation quality factors of such antennas and conventional patch antennas loaded with (reference) dielectrics. In the ideal case this ratio depends only on the propagation constant and wave impedance of the structure under test, and it can be conveniently used to study what kind of dispersion leads to improved impedance bandwidth. We illustrate the effect of dispersion by implementing a resonant patch antenna using a periodic network of LC elements. The analytical results predicting enhanced impedance bandwidth compared to the reference results are validated using a commercial circuit simulator. Discussion is conducted on the practical limitations for the use of the proposed expression.

physics.class-ph

Near-field enhancement and sub-wavelength imaging in the optical region using a pair of two-dimensional arrays of metal nanospheres

Near-field enhancement and sub-wavelength imaging properties of a system comprising a coupled pair of two-dimensional arrays of resonant nanospheres are studied. The concept of using two coupled material sheets possessing surface mode resonances for evanescent field enhancement is already well established in the microwave region. This paper shows that the same principles can be applied also in the optical region, where the performance of the resonant sheets can be realized with the use of metallic nanoparticles. In this paper we present design of such structures and study the electric field distributions in the image plane of such superlens.

physics.optics

Experimental verification of the key properties of a three-dimensional isotropic transmission line based superlens

Design and experimental realization of a three-dimensional superlens based on LC-loaded transmission lines are presented. Commercially available components and materials are used in the design. Transmission properties of the designed structure are studied experimentally and the observed lens properties are compared with analytical predictions. Backward-wave propagation and amplification of evanescent waves in the prototype structure are verified both analytically and experimentally.

physics.optics