arXiv subjects

Pekka Koskinen

Publications and source records attributed to Pekka Koskinen.

At least 37 records · Page 2Linked to original sources

arXiv2017

Growth of two-dimensional Au patches in graphene pores: a density-functional study

Inspired by recent studies of various two-dimensional (2D) metals such as Au, Fe and Ag, we study the growth of two-dimensional gold patches in graphene pores by density-functional theory. We find that at room temperature gold atoms diffuse readily on top of both graphene and two-dimensional gold with energy barriers less than $0.5$ eV. Furthermore, gold atoms move without barriers from the top of graphene to its edge and from the top of 2D gold to its edge. The energy barriers are absent even at the interface of 2D gold and graphene, so that the gold atoms move effortlessly across the interface. We hope our demonstration for the propensity of diffusing gold atoms to grow 2D gold patches in graphene pores will inspire the fabrication of these patches experimentally.

cond-mat.mes-hall↗

arXiv2016

Quantum Simulations of One-Dimensional Nanostructures under Arbitrary Deformations

A powerful technique is introduced for simulating mechanical and electromechanical properties of one-dimensional nanostructures under arbitrary combinations of bending, twisting, and stretching. The technique is based on a novel control of periodic symmetry, which eliminates artifacts due to deformation constraints and quantum finite-size effects, and allows transparent electronic structure analysis. Via density-functional tight-binding implementation, the technique demonstrates its utility by predicting novel electromechanical properties in carbon nanotubes and abrupt behavior in the structural yielding of Au7 and MoS nanowires. The technique drives simulations markedly closer to the realistic modeling of these slender nanostructures under experimental conditions.

cond-mat.mes-hall↗

arXiv2016

Limits of stability in supported graphene nanoribbons subject to bending

Graphene nanoribbons are prone to in-plane bending even when supported on flat substrates. However, the amount of bending that ribbons can stably withstand remains poorly known. Here, by using molecular dynamics simulations, we study the stability limits of 0.5-1.9 nm wide armchair and zigzag graphene nanoribbons subject to bending. We observe that the limits for maximum stable curvatures are below ~10 deg/nm, in case the bending is externally forced and the limit is caused by buckling instability. Furthermore, it turns out that the limits for maximum stable curvatures are also below ~10 deg/nm, in case the bending is not forced and the limit arises only from the corrugated potential energy landscape due to the substrate. Both of the stability limits lower rapidly when ribbons widen. These results agree with recent experiments and can be understood by means of transparent elasticity models.

cond-mat.mes-hall↗

arXiv2015

Peeling of multilayer graphene generates complex interlayer sliding patterns

Peeling, shearing, and sliding are important mechanical phenomena in van der Waals solids. However, theoretically they have been studied mostly using minimal periodic cells and in the context of accurate quantum simulations. Here, we investigate the peeling of large-scale multilayer graphene stacks with varying thicknesses, stackings, and peeling directions by using classical molecular dynamics simulations with a registry-dependent interlayer potential. Simulations show that, while at large scale the peeling proceeds smoothly, at small scale the registry shifts and sliding patterns of the layers are unexpectedly intricate and depend both on the initial stacking and on the peeling direction. These observations indicate that peeling and concomitant kink formations may well transform stacking order and thereby profoundly influence the electronic structures of such multilayer solids.

cond-mat.mes-hall↗

arXiv2015

Plenty of motion at the bottom: Atomically thin liquid gold membrane

The discovery of graphene some ten years ago was the first proof of a free-standing two-dimensional (2D) solid phase. Here, using quantum molecular dynamics simulations of nanoscale gold patches suspended in graphene pores, we predict the existence of an atomically thin, free-standing 2D liquid phase. The liquid phase, enabled by the exceptional planar stability of gold due to relativistic effects, demonstrates extreme fluxionality of metal nanostructures and opens possibilities for a variety of nanoscale phenomena.

cond-mat.mes-hall↗

arXiv2014

Graphene Cardboard: from Ripples to Tunable Metamaterial

Recently graphene was introduced with tunable ripple texturing, a nanofabric enabled by graphene's remarkable elastic properties. However, one can further envision sandwiching the ripples, thus constructing composite nanomaterial, graphene cardboard. Here the basic mechanical properties of such structures are investigated computationally. It turns out that graphene cardboard is highly tunable material, for its elastic figures of merit vary orders of magnitude, with Poisson ratio tunable from 10 to -0.5 as one example. These trends set a foundation to guide the design and usage of metamaterials made of rippled van der Waals solids.

cond-mat.mes-hall↗

arXiv2013

Electronic Structure Trends of Möbius Graphene Nanoribbons from Minimal-Cell Simulations

Investigating topological effects in materials requires often the modeling of material systems as a whole. Such modeling restricts system sizes, and makes it hard to extract systematic trends. Here, we investigate the effect of Möbius topology in the electronic structures of armchair graphene nanoribbons. Using density-functional tight-binding method and minimum-cell simulations through revised periodic boundary conditions, we extract electronic trends merely by changing cells' symmetry operations and respective quantum number samplings. It turns out that for a minimum cell calculation, once geometric and magnetic contributions are ignored, the effect of the global topology is unexpectedly short-ranged.

cond-mat.mes-hall↗

arXiv2013

Bending-Induced Delamination of van der Waals Solids

Although sheets of layered van der Waals solids offer great opportunities to custom-design nanomaterial properties, their weak interlayer adhesion challenges structural stability against mechanical deformation. Here, bending-induced delamination of multilayer sheets is investigated by molecular dynamics simulations, using graphene as an archetypal van der Waals solid. Simulations show that delamination of a graphene sheet occurs when its radius of curvature decreases roughly below $R_c=5.3\text{nm}\times (\text{number of layers})^{3/2}$ and that, as a rule, one-third of the layers get delaminated. These clear results are explained by a general and transparent model, a useful future reference for guiding the design of nanostructured van der Waals solids.

cond-mat.mtrl-sci↗

arXiv2013

Topological Signatures in the Electronic Structure of Graphene Spirals

Topology is familiar mostly from mathematics, but also natural sciences have found its concepts useful. Those concepts have been used to explain several natural phenomena in biology and physics, and they are particularly relevant for the electronic structure description of topological insulators and graphene systems. Here, we introduce topologically distinct graphene forms - graphene spirals - and employ density-functional theory to investigate their geometric and electronic properties. We found that the spiral topology gives rise to an intrinsic Rashba spin-orbit splitting. Through a Hamiltonian constrained by space curvature, graphene spirals have topologically protected states due to time-reversal symmetry. In addition, we argue that the synthesis of such graphene spirals is feasible and can be achieved through advanced bottom-up experimental routes that we indicate in this work.

cond-mat.mes-hall↗

arXiv2012

Graphene nanoribbons subject to gentle bends

Since graphene nanoribbons are thin and flimsy, they need support. Support gives firm ground for applications, and adhesion holds ribbons flat, although not necessarily straight: ribbons with high aspect ratio are prone to bend. The effects of bending on ribbons' electronic properties, however, are unknown. Therefore, this article examines the electromechanics of planar and gently bent graphene nanoribbons. Simulations with density-functional tight-binding and revised periodic boundary conditions show that gentle bends in armchair ribbons can cause significant widening or narrowing of energy gaps. Moreover, in zigzag ribbons sizeable energy gaps can be opened due to axial symmetry breaking, even without magnetism. These results infer that, in the electronic measurements of supported ribbons, such bends must be heeded.

cond-mat.mes-hall↗

arXiv2011

Revised Periodic Boundary Conditions: Fundamentals, Electrostatics, and the Tight-Binding Approximation

Many nanostructures today are low-dimensional and flimsy, and therefore get easily distorted. Distortion-induced symmetry-breaking makes conventional, translation-periodic simulations invalid, which has triggered developments for new methods. Revised periodic boundary conditions (RPBC) is a simple method that enables simulations of complex material distortions, either classically or quantum-mechanically. The mathematical details of this easy-to-implement approach, however, have not been discussed before. Therefore, in this paper we summarize the underlying theory, present the practical details of RPBC, especially related to a non-orthogonal tight-binding formulation, discuss selected features, electrostatics in particular, and suggest some examples of usage. We hope this article to give more insight to RPBC, to help and inspire new software implementations capable of exploring the physics and chemistry of distorted nanomaterials.

cond-mat.mtrl-sci↗

arXiv2011

Electromechanics of Twisted Graphene Nanoribbons

Graphene nanoribbons are the flimsiest material systems in the world, and they get readily distorted. Distortion by twisting, for one, is important because it couples to ribbon's electronic properties. In this Letter, using simulations with density-functional tight-binding and revised periodic boundary conditions, I show that twisting appears almost equivalent to stretching; electronic structures in a given nanoribbon either upon twisting or upon certain stretching are quantitatively similar. This simple equivalence will provide a valuable guideline for interpreting and designing experiments with these flimsy ribbons.

cond-mat.mes-hall↗

arXiv2010

Approximate Modeling of Spherical Membrane

Spherical symmetry is ubiquitous in nature. It's therefore unfortunate that spherical system simulations are so hard, and require complete spheres with millions of interacting particles. Here we introduce an approach to model spherical systems, using revised periodic boundary conditions adapted to spherical symmetry. Method reduces computational costs by orders of magnitude, and is applicable for both solid and liquid membranes, provided the curvature is sufficiently small. We demonstrate the method by calculating the bending and Gaussian curvature moduli of single- and multi-layer graphene. Method works with any interaction (ab initio, classical interactions), with any approach (molecular dynamics, Monte Carlo), and with applications ranging from science to engineering, from liquid to solid membranes, from bubbles to balloons.

cond-mat.mtrl-sci↗

arXiv2010

Electronic and optical trends in carbon nanotubes under pure bending

The high aspect ratio of carbon nanotubes makes them prone to bending. To know how bending affects the tubes is therefore crucial for tube identification and for electrical component design. Very few studies, however, have investigated tubes under small bending well below the buckling limit, because of technical problems due to broken translational symmetry. In this Letter a cost-effective and exact modeling of singe-walled nanotubes under such small bending is enabled by revised periodic boundary conditions, combined with density-functional tight-binding. The resulting, bending-induced changes in electronic and optical properties fall in clear chirality-dependent trend families. While the correct trends require full structural relaxation, they can be understood by one general argument. To know these trends fills a fundamental gap in our understanding of the properties of carbon nanotubes.

cond-mat.mes-hall↗

arXiv2010

Efficient approach for simulating distorted materials

The operation principles of nanoscale devices are based upon both electronic and mechanical properties of materials. Because these properties can be coupled, they need to be investigated simultaneously. At this moment, however, the electronic structure calculations with custom-made long-range mechanical distortions are impossible, or expensive at best. Here we present a unified formalism to solve exactly the electronic structures of nanomaterials with versatile distortions. We illustrate the formalism by investigating twisted armchair graphene nanoribbons with the least possible number of atoms. Apart from enabling versatile material distortions, the formalism is capable of reducing computational costs orders of magnitude in various areas of science and engineering.

cond-mat.mtrl-sci↗

arXiv2010

Exploring the graphene edges with coherent electron focusing

We study theoretically the coherent electron focusing in graphene nanoribbons. Using semiclassical and numerical tight binding calculations we show that perfect armchair edges give rise to equidistant peaks in the focusing spectrum. In the case of zigzag edges at low magnetic fields one can also observe focusing peaks but with increasing magnetic field a more complex interference structure emerges in the spectrum. This difference in the spectra can be observed even if the zigzag edge undergoes structural reconstruction. Therefore transverse electron focusing can help in the identification and characterisation of the edge structure of graphene samples.

cond-mat.mes-hall↗

arXiv2009

Density-functional tight-binding for beginners

This article is a pedagogical introduction to density-functional tight-binding (DFTB) method. We derive it from the density-functional theory, give the details behind the tight-binding formalism, and give practical recipes for parametrization: how to calculate pseudo-atomic orbitals and matrix elements, and especially how to systematically fit the short-range repulsions. Our scope is neither to provide a historical review nor to make performance comparisons, but to give beginner's guide for this approximate, but in many ways invaluable, electronic structure simulation method--now freely available as an open-source software package, hotbit.

cond-mat.mtrl-sci↗

arXiv2009

Evidence for Graphene Edges Beyond Zigzag and Armchair

The edges of nanoscopic objects determine most of their properties. For this reason the edges of honeycomb carbon--always considered either zigzag- or armchair-like--need special attention. In this report we provide experimental evidence confirming a previous unexpected prediction: zigzag is a metastable edge, as its planar reconstruction lowers energy and forms the most stable graphene edge. Our evidence is based on re-analyzing a recent experiment. Since the reconstructed edge, along with other unconventional edges we discuss, has distinct chemical properties, this discovery urges for care in experiments and theory--we must enter the realm beyond zigzag and armchair.

cond-mat.mes-hall↗