Searcharxiv⌕ Search

arXiv subjects

Peng Deng

Publications and source records attributed to Peng Deng.

At least 19 recordsLinked to original sources
arXiv2026

Reversible tuning of magnetic order and intrinsic superconductivity in strained FeTe films via stoichiometry control

FeTe is a prototypical parent compound of iron-based superconductors. While bulk FeTe is non-superconducting with a long-range bicollinear antiferromagnetic order, superconductivity has been achieved in thin films. However, the approaches usually involve complex oxygen incorporation or interfacial effects, the microscopic mechanisms of which remain elusive. Here, we prepare high-purity, bare FeTe thin films on SrTiO3 and investigate their magnetic and superconducting states combining both microscopic and macroscopic characterizations. By reducing the interstitial Fe impurities, we successfully suppress the long-range antiferromagnetic order, enhance the quasiparticle coherence and induce superconductivity at ~10 K. Moreover, this process is readily reversible by tuning the Fe concentration. Our findings reveal that precise stoichiometric control is sufficient to induce intrinsic superconductivity in strained FeTe thin films. This work provides insights into the competition between magnetism and superconductivity in iron chalcogenides, and supplies methods for developing stable, high-purity superconducting FeTe films.

cond-mat.supr-con↗
arXiv2026

Bosonic phases across the superconductor-insulator transition in infinite-layer samarium nickelate

Superconductivity arises from the global phase coherence of Cooper pairs. Modulation of phase coherence leads to quantum phase transitions, serving as an important tool for studying unconventional superconductivity. Here, we demonstrate bosonic phases across the superconductor-insulator transition in infinite-layer nickelate superconducting films by the control of spatially periodic network patterns. Magnetoresistance oscillations with a periodicity of h/2e provide direct evidence of 2e Cooper pairing in nickelates. The phase transition is predominantly driven by enhanced superconducting fluctuations, and Cooper pairs are involved in charge transport across the transition. Notably, we observe two types of anomalous metallic phases, emerging respectively at finite magnetic fields and down to zero magnetic field. They can be characterized by bosonic excitations, suggesting the dynamic roles of vortices in the ground states. Our work establishes nickelates as a key platform for investigating the rich landscape of bosonic phases controlled via the phase coherence of Cooper pairs.

cond-mat.supr-con↗
arXiv2025

In-Plane Field induced Quantized Longitudinal Conductivity in Magnetic Topological Insulators

We report the discovery of an in plane quantization (IPQ) state in trilayer magnetic topological insulators, characterized by a quantized longitudinal conductivity of e2/h under strong in-plane magnetic fields. This state emerges at a quantum critical point separating quantum anomalous Hall phases tuned by field angle and orientation, directly linking gap-closing behavior to quantized criticality. Temperature and gate dependent transport measurements, supported by a self consistent approximation model, reveal that electron hole puddles dominate charge transport in this regime, highlighting the essential role of impurity disorder in stabilizing quantized critical transport. These findings establish a tunable experimental framework that connects gap-closing physics with universal conductivity, offering both microscopic insight into critical transport in magnetic topological insulators and a robust platform for probing quantum criticality in topological systems.

cond-mat.mes-hall↗
arXiv2024

Confidential Computing on NVIDIA Hopper GPUs: A Performance Benchmark Study

This report evaluates the performance impact of enabling Trusted Execution Environments (TEE) on NVIDIA Hopper GPUs for large language model (LLM) inference tasks. We benchmark the overhead introduced by TEE mode across various LLMs and token lengths, with a particular focus on the bottleneck caused by CPU-GPU data transfers via PCIe. Our results indicate that while there is minimal computational overhead within the GPU, the overall performance penalty is primarily attributable to data transfer. For the majority of typical LLM queries, the overhead remains below 7%, with larger models and longer sequences experiencing nearly zero overhead.

cs.DC↗
arXiv2024

Massive 1D Dirac Line, Solitons and Reversible Manipulation on the Surface of a Prototype Obstructed Atomic Insulator, Silicon

Topologically trivial insulators can be classified into atomic insulators (AIs) and obstructed atomic insulators (OAIs) depending on whether the Wannier charge centers are localized or not at spatial positions occupied by atoms. An OAI can possess unusual properties such as surface states along certain crystalline surfaces, which advantageously appear in materials with much larger bulk energy gap than topological insulators, making them more attractive for potential applications. In this work, we show that a well-known crystal, silicon (Si) is a model OAI, which naturally explains some of Si's unusual properties such as its famous (111) surface states. On this surface, using angle resolved photoemission spectroscopy (ARPES), we reveal sharp quasi-1D massive Dirac line dispersions; we also observe, using scanning tunneling microscopy/spectroscopy (STM/STS), topological solitons at the interface of the two atomic chains. Remarkably, we show that the different chain domains can be reversibly switched at the nanometer scale, suggesting the application potential in ultra-high density storage devices.

cond-mat.mes-hall↗
arXiv2024

Tunning the number of chiral edge channels in a fixed quantum anomalous Hall system

Quantum anomalous Hall (QAH) insulators exhibit chiral edge channels characterized by vanishing longitudinal conductance and quantized Hall conductance of Ce2/h, wherein the Chern number C is an integer equal to the number of the parallel chiral edge channels. These chiral edge channels conduct dissipationless transport in QAH insulators, making them pivotal for applications in low-consumption electronics and topological quantum computing. While the QAH effect with multiple chiral edge channels (i.e., C >1) has been demonstrated in multilayers consisting of magnetic topological insulators and normal insulators, the channel number remains fixed for a given sample. Here, we unveil the tunability of the number of chiral edge channels within a single QAH insulator device. By tuning the magnetization of individual layers within the multilayer system, Chern insulating states with different Chern numbers are unveiled. The tunable Chern number was corroborated by our theoretical calculations. Furthermore, we conducted layer-dependent calculations to elucidate the contribution of the Chern number from different layers in the multilayer. Our findings demonstrate an extra degree of freedom in manipulating the chiral edge channels in QAH insulators. This newfound tunability offers extra dimension for the implementation of the QAH-based multi-channel dissipationless transport.

cond-mat.mes-hall↗
arXiv2023

Edge Magnetoplasmon Dispersion and Time-Resolved Plasmon Transport in a Quantum Anomalous Hall Insulator

A quantum anomalous Hall (QAH) insulator breaks reciprocity by combining magnetic polarization and spin-orbit coupling to generate a unidirectional transmission of signals in the absence of an external magnetic field. Such behavior makes QAH materials a good platform for the innovation of circulator technologies. However, it remains elusive as to how the wavelength of the chiral edge plasmon relates to its frequency and how the plasmon wave packet is excited in the time domain in a QAH insulator. Here, we investigate the edge magnetoplasmon (EMP) resonances in Cr-(Bi,Sb)$_2$Te$_3$ by frequency and time domain measurements. From disk shaped samples with various dimensions, we obtain the dispersion relation of EMPs and extract the drift velocity of the chiral edge state. From the time-resolved transport measurements, we identify the velocity of the plasmon wave packet and observe a transition from the edge to bulk transport at an elevated temperature. We show that the frequency and time domain measurements are well modeled by loss from the microwave induced dissipative channels in the bulk area. Our results demonstrate that the EMP decay rate can be significantly reduced by applying a low microwave power and fabricating devices of larger diameter $\ge100~\mu$m. In a $R=125~\mu$m sample, a non-reciprocity of 20 dB has been realized at 1.3 GHz, shining light on using QAH insulators to develop on-chip non-reciprocal devices.

cond-mat.mtrl-sci↗
arXiv2023

Implementing Microwave Impedance Microscopy in a Dilution Refrigerator

We report the implementation of a dilution-refrigerator-based scanning microwave impedance microscope (MIM) with a base temperature of ~ 100 mK. The vibration noise of our apparatus with tuning-fork feedback control is as low as 1 nm. Using this setup, we have demonstrated the imaging of quantum anomalous Hall states in magnetically (Cr and V) doped (Bi, Sb)2Te3 thin films grown on mica substrates. Both the conductive edge modes and topological phase transitions near coercive fields of Cr-doped and V-doped layers are visualized in the field-dependent results. Our work establishes the experimental platform for investigating nanoscale quantum phenomena under ultralow temperatures.

cond-mat.mes-hall↗
arXiv2023

Motion Planning for Autonomous Driving: The State of the Art and Future Perspectives

Intelligent vehicles (IVs) have gained worldwide attention due to their increased convenience, safety advantages, and potential commercial value. Despite predictions of commercial deployment by 2025, implementation remains limited to small-scale validation, with precise tracking controllers and motion planners being essential prerequisites for IVs. This paper reviews state-of-the-art motion planning methods for IVs, including pipeline planning and end-to-end planning methods. The study examines the selection, expansion, and optimization operations in a pipeline method, while it investigates training approaches and validation scenarios for driving tasks in end-to-end methods. Experimental platforms are reviewed to assist readers in choosing suitable training and validation strategies. A side-by-side comparison of the methods is provided to highlight their strengths and limitations, aiding system-level design choices. Current challenges and future perspectives are also discussed in this survey.

cs.RO↗
arXiv2023

Concurrent Ferromagnetism and Superconductivity in Fe(Te,Se) van der Waals Josephson Junctions

Ferromagnetism and superconductivity are two key ingredients to create non-Abelian quasiparticle excitations that are expected as building blocks to construct topological quantum computers. Adversely, ferromagnetism and superconductivity are typically also two hostile orderings competing to align spins in different configurations, making the material design and experimental implementation extremely challenging. Recently, iron-based superconductor Fe(Te,Se) has emerged as a connate topological superconductor (TSC), which differentiates itself from other hybrid TSCs by self-proximitizing its Dirac surface states with bulk superconductivity. So far, the efforts to search for Majorana states in this material are prevalently focused on spectroscopy techniques. In this paper, we present the global transport signature of interfacial magnetism coexisting with superconductivity. Time-reversal symmetry breaking superconducting states are confirmed through device level transport measurements for the first time in a van der Waals (vdW) Josephson junction structure. Magnetic hysteresis is observed in this device scheme, which only appears below the superconducting critical temperature, leading to potential Fulde-Ferrell (FF) superconducting pairing mechanisms. The 0-{\pi} phase mixing in the Fraunhofer patterns pinpoints the ferromagnetic state dwelling on the surface. Furthermore, a stochastic field-free superconducting diode effect also confirms the spontaneous time-reversal symmetry breaking which reflects the behavior of the ferromagnetism. Our work paves a new way to explore topological superconductivity in iron-based superconductors for future high Tc fault-tolerant qubit implementations from a device perspective.

cond-mat.supr-con↗
arXiv2022

Exchange-biased quantum anomalous Hall effect

The quantum anomalous Hall (QAH) effect is characterized by a dissipationless chiral edge state with a quantized Hall resistance at zero magnetic field. Manipulating the QAH state is of great importance in both the understanding of topological quantum physics and the implementation of dissipationless electronics. Here, we realized the QAH effect in the magnetic topological insulator Cr-doped (Bi,Sb)2Te3 (CBST) grown on an uncompensated antiferromagnetic insulator Al-doped Cr2O3. Through polarized neutron reflectometry (PNR), we find a strong exchange coupling between CBST and Al-Cr2O3 surface spins fixing interfacial magnetic moments perpendicular to the film plane. The interfacial coupling results in an exchange-biased QAH effect. We further demonstrate that the magnitude and sign of the exchange bias can be effectively controlled using a field training process to set the magnetization of the Al-Cr2O3 layer. Our work demonstrates the use of the exchange bias effect to effectively manipulate the QAH state, opening new possibilities in QAH-based spintronics.

cond-mat.mes-hall↗
arXiv2021

Mesoscopic Transport of Quantum Anomalous Hall Effect in Sub-Micron Size Regime

The quantum anomalous Hall (QAH) effect has been demonstrated in two-dimensional topological insulator systems incorporated with ferromagnetism. However, a comprehensive understanding of mesoscopic transport in sub-micron QAH devices has yet been established. Here we fabricated miniaturized QAH devices with channel widths down to 600 nm, where the QAH features are still preserved. A back-scattering channel is formed in narrow QAH devices through percolative hopping between 2D compressible puddles. Large resistance fluctuations are observed in narrow devices near the coercive field, which is associated with collective interference between intersecting paths along domain walls when the device geometry is smaller than the phase coherence length $L_\phi$. Through measurement of size-dependent breakdown current, we confirmed that the chiral edge states are confined at the physical boundary with its width on the order of Fermi wavelength.

cond-mat.mes-hall↗
arXiv2021

Distinguishing two-component anomalous Hall effect from topological Hall effect

In transport, the topological Hall effect (THE) presents itself as non-monotonic features (or humps and dips) in the Hall signal and is widely interpreted as a sign of chiral spin textures, like magnetic skyrmions. However, when anomalous Hall effect (AHE) is also present, the co-existence of two AHEs could give rise to similar artifacts, making it difficult to distinguish between genuine THE with AHE and two-component AHE. Here we confirm genuine THE with AHE by means of transport and magneto-optical Kerr effect (MOKE) microscopy, in which magnetic skyrmions are directly observed, and find that genuine THE occurs in the transition region of the AHE. In sharp contrast, the artifact "THE", or two-component AHE occurs well beyond the saturation of the "AHE component" (under the false assumption of THE+AHE). Furthermore, we distinguish artifact "THE" from genuine THE by three methods: 1. Minor loops, 2. Temperature dependence, 3. Gate dependence. Minor loops of genuine THE with AHE are always within the full loop, while minor loops of the artifact "THE" may reveal a single loop that cannot fit into the "AHE component". Besides, the temperature or gate dependence of the artifact "THE" may also be accompanied by a polarity change of the "AHE component", as the non-monotonic features vanish, while the temperature dependence of genuine THE with AHE reveals no such change. Our work may help future researchers to exercise cautions and use these methods to examine carefully in order to ascertain genuine THE.

cond-mat.mtrl-sci↗
arXiv2019

Edge states at nematic domain walls in FeSe films

Quantum spin Hall (QSH) effect is an intriguing phenomenon arising from the helical edge states in two-dimensional topological insulators. We use molecular beam epitaxy (MBE) to prepare FeSe films with atomically sharp nematic domain boundaries, where tensile strains, nematicity suppression and topological band inversion are simultaneously achieved. Using scanning tunneling microscopy (STM), we observe edge states at the Fermi level that spatially distribute as two distinct strips in the vicinity of the domain boundaries. At the endpoint of the boundaries, a bound state at the Fermi level is further observed. The topological origin of the edge states is supported by density functional theory calculations. Our findings not only demonstrate a candidate for QSH states, but also provide a new pathway to realize topological superconductivity in a single-component film.

cond-mat.supr-con↗
arXiv2016

Effect of white LED DC-bias on modulation speed for visible light communications

The light emitting diode (LED) nonlinearities distortion induced degradation in the performance of visible light communication (VLC) systems can be controlled by optimizing the DC bias point of the LED. In this paper, we theoretically analyze and experimentally demonstrate the effect of white LED DC bias on nonlinear modulation bandwidth and dynamic range of the VLC system. The linear dynamic range is enhanced by using series-connected LED chips, and the modulation bandwidth is extended to 40 MHz by post-equalization without using a blue filter. The experimental results well match the theoretical model of LED nonlinear modulation characteristics. The results show that the modulation bandwidth increases and saturates with an increase in LED DC bias current due to nonlinear effect of carrier lifetime and junction capacitance. The optimized DC-bias current that corresponds to the minimum BER increases with the increase of data rate. A 60-Mbps NRZ transmission can be achieved with BER threshold of 10-3 by properly adjusting LED DC bias point.

cs.IT↗
arXiv2016

Adaptive Real-Time Software Defined MIMO Visible Light Communications using Spatial Multiplexing and Spatial Diversity

In this paper, we experimentally demonstrate a real-time software defined multiple input multiple output (MIMO) visible light communication (VLC) system employing link adaptation of spatial multiplexing and spatial diversity. Real-time MIMO signal processing is implemented by using the Field Programmable Gate Array (FPGA) based Universal Software Radio Peripheral (USRP) devices. Software defined implantation of MIMO VLC can assist in enabling an adaptive and reconfigurable communication system without hardware changes. We measured the error vector magnitude (EVM), bit error rate (BER) and spectral efficiency performance for single carrier M-QAM MIMO VLC using spatial diversity and spatial multiplexing. Results show that spatial diversity MIMO VLC improves error performance at the cost of spectral efficiency that spatial multiplexing should enhance. We propose the adaptive MIMO solution that both modulation schema and MIMO schema are dynamically adapted to the changing channel conditions for enhancing the error performance and spectral efficiency. The average error-free spectral efficiency of adaptive 2x2 MIMO VLC achieved 12 b/s/Hz over 2 meters indoor dynamic transmission.

cs.IT↗
arXiv2016

Experimental observation of topological Fermi arcs in type-II Weyl semimetal MoTe2

Weyl semimetal is a new quantum state of matter [1-12] hosting the condensed matter physics counterpart of relativisticWeyl fermion [13] originally introduced in high energy physics. The Weyl semimetal realized in the TaAs class features multiple Fermi arcs arising from topological surface states [10, 11, 14-16] and exhibits novel quantum phenomena, e.g., chiral anomaly induced negative mag-netoresistance [17-19] and possibly emergent supersymmetry [20]. Recently it was proposed theoretically that a new type (type-II) of Weyl fermion [21], which does not have counterpart in high energy physics due to the breaking of Lorentz invariance, can emerge as topologically-protected touching between electron and hole pockets. Here, we report direct spectroscopic evidence of topological Fermi arcs in the predicted type-II Weyl semimetal MoTe2 [22-24]. The topological surface states are confirmed by directly observing the surface states using bulk-and surface-sensitive angle-resolved photoemission spectroscopy (ARPES), and the quasi-particle interference (QPI) pattern between the two putative Fermi arcs in scanning tunneling microscopy (STM). Our work establishes MoTe2 as the first experimental realization of type-II Weyl semimetal, and opens up new opportunities for probing novel phenomena such as exotic magneto-transport [21] in type-II Weyl semimetals.

cond-mat.mes-hall↗