arXiv subjects

Peng Jiang

Publications and source records attributed to Peng Jiang.

At least 307 records · Page 17Linked to original sources

arXiv2020

A Survey on the Security of Blockchain Systems

Since its inception, the blockchain technology has shown promising application prospects. From the initial cryptocurrency to the current smart contract, blockchain has been applied to many fields. Although there are some studies on the security and privacy issues of blockchain, there lacks a systematic examination on the security of blockchain systems. In this paper, we conduct a systematic study on the security threats to blockchain and survey the corresponding real attacks by examining popular blockchain systems. We also review the security enhancement solutions for blockchain, which could be used in the development of various blockchain systems, and suggest some future directions to stir research efforts into this area.

cs.CR↗

arXiv2020

A Broad Absorption Line Outflow Associated with the Broad Emission Line Region in the Quasar SDSS J075133.35+134548.3

We report the discovery of unusual broad absorption lines (BALs) in the bright quasar SDSS J075133.35+134548.3 at z~1, and present a detailed study of BAL and emission lines using the archived and newly obtained optical and NIR spectroscopic data. The BALs are detected tentatively in Mg II, Al III and reliably in HeI*3889, HeI*10830, which show complexed velocity structures splitting into two components: a high-velocity component (HV), with a blueshifted velocity range of -9300 ~ -3500 km/s, can be reliably detected tentatively in Mg II, Al III and reliably in HeI* 10830, whereas it is undetectable in HeI* 3889; and low-Velocity component (LV), with the velocity of -3500 ~ -1800 km/s, is only detected in HeI*3889 and HeI* 10830. With the BALs from different ions, the HV outflowing gas can be constrained to have a density n_H~10^10.3-10^11.4 cm^-3, a column density N_H~10^21 cm^-2 and an ionization parameter U~10^-1.83 - 10^-1.72; and thus inferring a distance of R_HV~0.5 pc from the central continuum source with a monochromatic luminosity of 7.0*10^45 erg/s at 5100 A. This distance is remarkable similar to that of normal broad emission line region (BLR) estimated according to the luminosity-distance from the reverberation experiments, suggesting the association between the BLR and the HV BAL outflowing gas. Interestingly enough, a blueshifted component is also significantly detected in Mg II and Al III broad emission lines (BELs), and the Al III/Mg II of such a BEL component can be reproduced by the physical parameters inferred from the HV BAL gas. The LV BAL gas very likely have a larger column density and a higher ionization level than the HV BAL gas, and hence a smaller distance than that of the latter. Further spectroscopy with high S/N ratio and broader wavelength coverage is needed to confirm this and shed new light on the possible connection between BALs and BELs.

astro-ph.GA↗

arXiv2020

An approximately analytical solution method for the cable-driven parallel robot in FAST

FAST is the largest single-dish aperture telescope with a cable-driven parallel robot introduced to achieve the highest sensitivity in the world. However, to realize the high-precision, mechanical equations of such robot are always complicated, so that it is difficult to achieve real-time control by the traditional iterative method. In this regard, this paper proposes an approximately analytical solution method, which uses the approximately linear relationship between the main parameters of FAST to bypass some iterations. With the coefficients of the relationship extracted, static or quasi-static mechanical equations can be analytically solved. In this paper's example, this method saves at least 90% of the calculating time and the calculated values are consistent with the experimental data. With such huge efficiency improvements, real-time and high-precision control of FAST will no longer be a difficult work. Besides, all the work in this paper is expected to be used in the FAST.

astro-ph.IM↗

arXiv2020

Night-time measurements of astronomical seeing at Dome A in Antarctica

Seeing, the angular size of stellar images blurred by atmospheric turbulence, is a critical parameter used to assess the quality of astronomical sites. Median values at the best mid-latitude sites are generally in the range of 0.6--0.8\,arcsec. Sites on the Antarctic plateau are characterized by comparatively-weak turbulence in the free-atmosphere above a strong but thin boundary layer. The median seeing at Dome C is estimated to be 0.23--0.36 arcsec above a boundary layer that has a typical height of 30\,m. At Dome A and F, the only previous seeing measurements were made during daytime. Here we report the first direct measurements of night-time seeing at Dome A, using a Differential Image Motion Monitor. Located at a height of just 8\,m, it recorded seeing as low as 0.13\,arcsec, and provided seeing statistics that are comparable to those for a 20\,m height at Dome C. It indicates that the boundary layer was below 8\,m 31\% of the time. At such times the median seeing was 0.31\,arcsec, consistent with free-atmosphere seeing. The seeing and boundary layer thickness are found to be strongly correlated with the near-surface temperature gradient. The correlation confirms a median thickness of approximately 14\,m for the boundary layer at Dome A, as found from a sonic radar. The thinner boundary layer makes it less challenging to locate a telescope above it, thereby giving greater access to the free-atmosphere.

astro-ph.IM↗

arXiv2020

Bright Debris Disk Candidates Observed with AKARI/Far-Infrared Surveyor (FIS)

We cross-correlate \hip\ main-sequence star catalog with \fis\ catalog, and identify 136 stars (at $>90$% reliability) with far-infrared detections at least in one band. After rejecting 51 stars classified as young stellar objects, Be stars, other type stars with known dust disks or with potential contaminations and 2 stars without infrared excess emission, we obtain a sample of 83 candidate stars with debris disks. Stars in our sample cover spectral types from B to K-types with most being early types. This represents an unique sample of luminous debris disks that derived uniformly from all sky survey with a spatial resolution a factor of two better than the previous such survey by \iras. Moreover, by collecting the infrared photometric data from other public archives, 85% of them have infrared excesses in more than one bands, allowing the estimate of the dust temperatures. We fit the blackbody model to the broad band spectral energy distribution of these stars to derive the statistical distribution of the disk parameters. 7 stars require an additional warm component of temperature around 200 K. While a substantial fraction of our sample(58 stars) have weak 12 \micron\ excess indicating that a warm dust component maybe common among these bright debris disk systems.

astro-ph.EP↗

arXiv2020

Deep-Learning Inversion of Seismic Data

We propose a new method to tackle the mapping challenge from time-series data to spatial image in the field of seismic exploration, i.e., reconstructing the velocity model directly from seismic data by deep neural networks (DNNs). The conventional way of addressing this ill-posed inversion problem is through iterative algorithms, which suffer from poor nonlinear mapping and strong nonuniqueness. Other attempts may either import human intervention errors or underuse seismic data. The challenge for DNNs mainly lies in the weak spatial correspondence, the uncertain reflection-reception relationship between seismic data and velocity model, as well as the time-varying property of seismic data. To tackle these challenges, we propose end-to-end seismic inversion networks (SeisInvNets) with novel components to make the best use of all seismic data. Specifically, we start with every seismic trace and enhance it with its neighborhood information, its observation setup, and the global context of its corresponding seismic profile. From the enhanced seismic traces, the spatially aligned feature maps can be learned and further concatenated to reconstruct a velocity model. In general, we let every seismic trace contribute to the reconstruction of the whole velocity model by finding spatial correspondence. The proposed SeisInvNet consistently produces improvements over the baselines and achieves promising performance on our synthesized and proposed SeisInv data set according to various evaluation metrics. The inversion results are more consistent with the target from the aspects of velocity values, subsurface structures, and geological interfaces. Moreover, the mechanism and the generalization of the proposed method are discussed and verified. Nevertheless, the generalization of deep-learning-based inversion methods on real data is still challenging and considering physics may be one potential solution.

cs.CV↗

arXiv2020

Deep Learning Inversion of Electrical Resistivity Data

The inverse problem of electrical resistivity surveys (ERSs) is difficult because of its nonlinear and ill-posed nature. For this task, traditional linear inversion methods still face challenges such as suboptimal approximation and initial model selection. Inspired by the remarkable nonlinear mapping ability of deep learning approaches, in this article, we propose to build the mapping from apparent resistivity data (input) to resistivity model (output) directly by convolutional neural networks (CNNs). However, the vertically varying characteristic of patterns in the apparent resistivity data may cause ambiguity when using CNNs with the weight sharing and effective receptive field properties. To address the potential issue, we supply an additional tier feature map to CNNs to help those aware of the relationship between input and output. Based on the prevalent U-Net architecture, we design our network (ERSInvNet) that can be trained end-to-end and can reach a very fast inference speed during testing. We further introduce a depth weighting function and a smooth constraint into loss function to improve inversion accuracy for the deep region and suppress false anomalies. Six groups of experiments are considered to demonstrate the feasibility and efficiency of the proposed methods. According to the comprehensive qualitative analysis and quantitative comparison, ERSInvNet with tier feature map, smooth constraints, and depth weighting function together achieve the best performance.

cs.CV↗

arXiv2020

A Fast Radio Burst discovered in FAST drift scan survey

We report the discovery of a highly dispersed fast radio burst, FRB~181123, from an analysis of $\sim$1500~hr of drift-scan survey data taken using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The pulse has three distinct emission components, which vary with frequency across our 1.0--1.5~GHz observing band. We measure the peak flux density to be $>0.065$~Jy and the corresponding fluence $>0.2$~Jy~ms. Based on the observed dispersion measure of 1812~cm$^{-3}$~pc, we infer a redshift of $\sim 1.9$. From this, we estimate the peak luminosity and isotropic energy to be $\lesssim 2\times10^{43}$~erg~s$^{-1}$ and $\lesssim 2\times10^{40}$~erg, respectively. With only one FRB from the survey detected so far, our constraints on the event rate are limited. We derive a 95\% confidence lower limit for the event rate of 900 FRBs per day for FRBs with fluences $>0.025$~Jy~ms. We performed follow-up observations of the source with FAST for four hours and have not found a repeated burst. We discuss the implications of this discovery for our understanding of the physical mechanisms of FRBs.

astro-ph.HE↗

arXiv2020

Position and attitude determination by integrated GPS/SINS/TS for feed support system of FAST

In this paper, a new measurement system based on integration method is presented,which can provide all-weather dependability and higher precision for the measurement of FAST's feed support system. The measurement system consists of three types of measuring equipments, and a processing software with the core data fusion algorithm. The Strapdown Inertial Navigation System(SINS) can autonomously measure the position, speed and attitude of the carrier. Its own shortcoming is the measurement data diverges rapidly over time. SINS must combine the Global Positioning System(GPS) and the Total Station(TS) to obtain high-precision measurement data. Kalman filtering algorithm is adopted for the integration measurement system, which is an optimal algorithm to estimate the measurement errors. To evaluate the performance, series of tests are carried out. For the feed cabin, the maximum RMS of the position is 14.56mm, the maximum RMS of the attitude is 0.095°, these value are less than 15mm and 0.1° as the precision for measuring the feed cabin. For the Stewart manipulator, the maximum RMS of the position is 2.99mm, the maximum RMS of the at titude is 0.093°, these value are less than 3mm and 0.1° as the precision for measuring the Stewart manipulator. As a result, the new measurement meets the requirement of measurement precision for FAST's feed support system.

astro-ph.IM↗

arXiv2020

Defect segmentation: Mapping tunnel lining internal defects with ground penetrating radar data using a convolutional neural network

This research proposes a Ground Penetrating Radar (GPR) data processing method for non-destructive detection of tunnel lining internal defects, called defect segmentation. To perform this critical step of automatic tunnel lining detection, the method uses a CNN called Segnet combined with the Lovász softmax loss function to map the internal defect structure with GPR synthetic data, which improves the accuracy, automation and efficiency of defects detection. The novel method we present overcomes several difficulties of traditional GPR data interpretation as demonstrated by an evaluation on both synthetic and real datas -- to verify the method on real data, a test model containing a known defect was designed and built and GPR data was obtained and analyzed.

cs.CV↗

arXiv2020

First embedded cluster formation in California molecular cloud

We performed a multi-wavelength observation toward LkHa 101 embedded cluster and its adjacent 85arcmin*60arcmin region. The LkHa 101 embedded cluster is the first and only one significant cluster in California molecular cloud (CMC). These observations have revealed that the LkHa 101 embedded cluster is just located at the projected intersectional region of two filaments. One filament is the highest-density section of the CMC, the other is a new identified filament with a low-density gas emission. Toward the projected intersection, we find the bridging features connecting the two filaments in velocity, and identify a V-shape gas structure. These agree with the scenario that the two filaments are colliding with each other. Using the Five-hundred-meter Aperture Spherical radio Telescope (FAST), we measured that the RRL velocity of the LkHa 101 H II region is 0.5 km/s, which is related to the velocity component of the CMC filament. Moreover, there are some YSOs distributed outside the intersectional region. We suggest that the cloud-cloud collision together with the fragmentation of the main filament may play an important role in the YSOs formation of the cluster.

astro-ph.GA↗

arXiv2020

Bi-Directional Attention for Joint Instance and Semantic Segmentation in Point Clouds

Instance segmentation in point clouds is one of the most fine-grained ways to understand the 3D scene. Due to its close relationship to semantic segmentation, many works approach these two tasks simultaneously and leverage the benefits of multi-task learning. However, most of them only considered simple strategies such as element-wise feature fusion, which may not lead to mutual promotion. In this work, we build a Bi-Directional Attention module on backbone neural networks for 3D point cloud perception, which uses similarity matrix measured from features for one task to help aggregate non-local information for the other task, avoiding the potential feature exclusion and task conflict. From comprehensive experiments and ablation studies on the S3DIS dataset and the PartNet dataset, the superiority of our method is verified. Moreover, the mechanism of how bi-directional attention module helps joint instance and semantic segmentation is also analyzed.

cs.CV↗

arXiv2020

Discovery and timing of pulsars in the globular cluster M13 with FAST

We report the discovery of a binary millisecond pulsar (namely PSR J1641+3627F or M13F) in the globular cluster M13 (NGC 6205) and timing solutions of M13A to F using observations made with the Five-hundred-metre Aperture Spherical radio Telescope (FAST). PSR J1641+3627F has a spin period of 3.00 ms and an orbital period of 1.4 days. The most likely companion mass is 0.16 M$_{\odot}$. M13A to E all have short spin periods and small period derivatives. We also confirm that the binary millisecond pulsar PSR J1641$+$3627E (also M13E) is a black widow with a companion mass around 0.02 M$_{\odot}$. We find that all the binary systems have low eccentricities compared to those typical for globular cluster pulsars and that they decrease with distance from the cluster core. This is consistent with what is expected as this cluster has a very low encounter rate per binary.

astro-ph.HE↗

arXiv2020

The Fundamental Performance of FAST with 19-beam Receiver at L Band

The Five-hundred-meter Aperture Spherical radio Telescope (FAST) passed national acceptance and is taking pilot cycle of 'Shared-Risk' observations. The 19-beam receiver covering 1.05-1.45 GHz was used for most of these observations. The electronics gain fluctuation of the system is better than 1\% over 3.5 hours, enabling enough stability for observations. Pointing accuracy, aperture efficiency and system temperature are three key parameters of FAST. The measured standard deviation of pointing accuracy is 7.9$''$, which satisfies the initial design of FAST. When zenith angle is less than 26.4$^\circ$, the aperture efficiency and system temperature around 1.4 GHz are $\sim$ 0.63 and less than 24 K for central beam, respectively. The measured value of these two parameters are better than designed value of 0.6 and 25 K, respectively. The sensitivity and stability of the 19-beam backend are confirmed to satisfy expectation by spectral HI observations toward N672 and polarization observations toward 3C286. The performance allows FAST to take sensitive observations in various scientific goals, from studies of pulsar to galaxy evolution.

astro-ph.IM↗

arXiv2019

Pilot HI Survey of Planck Galactic Cold Clumps with FAST

We present a pilot HI survey of 17 Planck Galactic Cold Clumps (PGCCs) with the Five-hundred-meter Aperture Spherical radio Telescope (FAST). HI Narrow Self-Absorption (HINSA) is an effective method to detect cold HI being mixed with molecular hydrogen H$_2$ and improves our understanding of the atomic to molecular transition in the interstellar medium. HINSA was found in 58\% PGCCs that we observed. The column density of HINSA was found to have an intermediate correlation with that of $^{13}$CO, following $\rm log( N(HINSA)) = (0.52\pm 0.26) log(N_{^{13}CO}) + (10 \pm 4.1) $. HI abundance relative to total hydrogen [HI]/[H] has an average value of $4.4\times 10^{-3}$, which is about 2.8 times of the average value of previous HINSA surveys toward molecular clouds. For clouds with total column density N$\rm_H >5 \times 10^{20}$ cm$^{-2}$, an inverse correlation between HINSA abundance and total hydrogen column density is found, confirming the depletion of cold HI gas during molecular gas formation in more massive clouds. Nonthermal line width of $^{13}$CO is about 0-0.5 km s$^{-1}$ larger than that of HINSA. One possible explanation of narrower nonthermal width of HINSA is that HINSA region is smaller than that of $^{13}$CO. Based on an analytic model of H$_2$ formation and H$_2$ dissociation by cosmic ray, we found the cloud ages to be within 10$^{6.7}$-10$^{7.0}$ yr for five sources.

astro-ph.GA↗

arXiv2019

A Deeply Buried Narrow-Line Seyfert 1 Nucleus Uncovered in Scattered Light

We present spectropolarimetric and spectrophotometric observations of the peculiar active galactic nucleus (AGN) SDSS J120300.19+162443.7 (hereafter J1203+1624) at $z=0.1656$. Its optical total flux spectra clearly show broad emission lines (BELs) in H$α$ and H$β$. After removal of narrow emission lines (NELs), the full width at half maximum of the lorentzian BEL is $FWHM_{\rm BEL} \approx 1,270$ km s$^{-1}$, fulfilling the conventional definition of a narrow line Seyfert 1 (NLS1) galaxy. However, its NELs are unprecedentedly strong when compared to type 1AGNs. This, together with its large MIR excess ($g-W_4 = 13.172$ mag), implies that the observer and the narrow emission line region (NELR) might see a different ionization continuum. Our optical spectropolarimetry confirms its type 2 nature by detecting a polarized blue continuum and Balmer BELs ($FWHM_{\rm Polarized~BEL} \approx 1,183$ km s$^{-1}$), with a high polarization degree of $> 20$% in the blue wing. The mass and Eddington rate of the central black hole is estimated based on both transmitted and scattered AGN radiation, which is $M_{\bullet} < 2.9 \times 10^7 M_\odot$ and $L_{\rm bol}/L_{\rm Edd} > 1.5$. Severe extinction of the AGN emission also enables a clear view of the compact host galaxy. Discovery of J1203+1624 suggests that NLS1 follows AGN unfication scheme, studying of its analogs could blaze a new trail for exploring the connection between black hole growth and star formation in the host galaxy. Interesting features of J1203+1624 like the peculiar NELs, inflowing scattering clouds within sublimation radius are worth detailed follow-ups in the future.

astro-ph.GA↗

arXiv2019

Discovery of Metastable He I* $λ$10830 Mini-broad Absorption Lines and Very Narrow Paschen $α$ Emission Lines in the ULIRG Quasar IRAS F11119+3257

IRAS F11119+3257 is a quasar-dominated Ultra-Luminous InfraRed Galaxy, with a partially obscured narrow-line seyfert 1 nucleus. In this paper, we present the NIR spectroscopy of F11119+3257, in which we find unusual Paschen emission lines, and metastable He I* $λ$10830 absorption associated with the previously reported atomic sodium and molecular OH mini-BAL (Broad Absorption Line) outflow. Photo-ionization diagnosis confirms previous findings that the outflows are at kilo-parsec scales. Such large-scale outflows should produce emission lines. We indeed find that high-ionization emission lines ([O III], [Ne III], and [Ne V]) are dominated by blueshifted components at similar speeds to the mini-BALs. The blueshifted components are also detected in some low-ionization emission lines, such as [O II] $λ$3727 and some Balmer lines (H$α$, H$β$, and H$γ$), even though their cores are dominated by narrow ($FWHM_{\rm NEL} = 570\pm40$km s$^{-1}$) or broad components at the systemic redshift of $z=0.18966\pm0.00006$. The mass flow rate (230-730$~M_\odot \rm yr^{-1}$) and the kinetic luminosity ($\dot{E}_k \sim 10^{43.6-44.8} $erg s$^{-1}$) are then inferred jointly from the blueshifted emission and absorption lines. In the NIR spectrum of F11119+3257, we also find that the Paschen emission lines are unique, in which a very narrow ($FWHM=260\pm20~$km s$^{-1}$) component is shown in only Pa$α$. This narrow component most probably comes from heavily obscured star formation. Based on the Pa$α$ and Pa$β$ emissions, we obtain an extinction at the $H$ band, $A_H~>~2.1$ (or a reddenning of $E_{B-V}~>~$3.7), and a star formation rate of $SFR~>~130\rm M_\odot yr^{-1}$ that resembles the estimates inferred from the FIR emissions ($SFR_{\rm FIR} = 190\pm90$ $M_\odot$ yr$^{-1}$).

astro-ph.GA↗

arXiv2019

An On-going Mid-infrared Outburst in the White Dwarf 0145+234: Catching in Action of Tidal Disruption of an Exoasteroid?

We report the detection of a large amplitude MIR outburst in the white dwarf (WD) 0145+234 in the NEOWISE Survey data. The source had a stable MIR flux before 2018, and was brightened by about 1.0 magnitude in the W1 and W2 bands within half a year and has been continuously brightening since then. No significant variations are found in the optical photometry data during the same period. This suggests that this MIR outburst is caused by recent replenishing or redistribution of dust, rather than intrinsic variations of the WD. SED modeling of 0145+234 suggests that there was already a dust disk around the WD in the quiescent state, and both of the temperature and surface area of the disk evolved rapidly since the outburst. The dust temperature was about 1770K in the initial rising phase, close to the sublimation temperature of silicate grains, and gradually cooled down to around 1150K, while the surface area increased by a factor of about 6 during the same period. The inferred closest distance of dust to the WD is within the tidal disruption radius of a gravitationally bounded asteroid. We estimated the dust mass to be between $3\times10^{15}$ to $3\times10^{17}$ $ρ/(1 \mathrm g~cm^{-3})$ kg for silicate grains of a power-law size distribution with a high cutoff size from 0.1 to 1000 microns. We interpret this as a possible tidal breakup of an exo-asteroid by the WD. Further follow-up observations of this rare event may provide insights on the origin of dust disk and metal pollution in some white dwarfs.

astro-ph.SR↗