arXiv subjects

Pengcheng Wang

Publications and source records attributed to Pengcheng Wang.

At least 55 records · Page 3Linked to original sources

arXiv2025

You Can Wash Hands Better: Accurate Daily Handwashing Assessment with a Smartwatch

Hand hygiene is among the most effective daily practices for preventing infectious diseases such as influenza, malaria, and skin infections. While professional guidelines emphasize proper handwashing to reduce the risk of viral infections, surveys reveal that adherence to these recommendations remains low. To address this gap, we propose UWash, a wearable solution leveraging smartwatches to evaluate handwashing procedures, aiming to raise awareness and cultivate high-quality handwashing habits. We frame the task of handwashing assessment as an action segmentation problem, similar to those in computer vision, and introduce a simple yet efficient two-stream UNet-like network to achieve this goal. Experiments involving 51 subjects demonstrate that UWash achieves 92.27% accuracy in handwashing gesture recognition, an error of <0.5 seconds in onset/offset detection, and an error of <5 points in gesture scoring under user-dependent settings. The system also performs robustly in user-independent and user-independent-location-independent evaluations. Remarkably, UWash maintains high performance in real-world tests, including evaluations with 10 random passersby at a hospital 9 months later and 10 passersby in an in-the-wild test conducted 2 years later. UWash is the first system to score handwashing quality based on gesture sequences, offering actionable guidance for improving daily hand hygiene. The code and dataset are publicly available at https://github.com/aiotgroup/UWash

eess.SP↗

arXiv2025

Residual Policy Gradient: A Reward View of KL-regularized Objective

Reinforcement Learning and Imitation Learning have achieved widespread success in many domains but remain constrained during real-world deployment. One of the main issues is the additional requirements that were not considered during training. To address this challenge, policy customization has been introduced, aiming to adapt a prior policy while preserving its inherent properties and meeting new task-specific requirements. A principled approach to policy customization is Residual Q-Learning (RQL), which formulates the problem as a Markov Decision Process (MDP) and derives a family of value-based learning algorithms. However, RQL has not yet been applied to policy gradient methods, which restricts its applicability, especially in tasks where policy gradient has already proven more effective. In this work, we first derive a concise form of Soft Policy Gradient as a preliminary. Building on this, we introduce Residual Policy Gradient (RPG), which extends RQL to policy gradient methods, allowing policy customization in gradient-based RL settings. With the view of RPG, we rethink the KL-regularized objective widely used in RL fine-tuning. We show that under certain assumptions, KL-regularized objective leads to a maximum-entropy policy that balances the inherent properties and task-specific requirements on a reward-level. Our experiments in MuJoCo demonstrate the effectiveness of Soft Policy Gradient and Residual Policy Gradient.

cs.LG↗

arXiv2025

Dispersion-Engineered Compact Twisted Metasurfaces Enabling 3D Frequency-Reconfigurable Holography

Flexible dispersion manipulation is critical for holography to achieve broadband imaging or frequency division multiplexing. Within this context, metasurface-based holography offers advanced dispersion control, yet dynamic reconfigurability remains largely unexplored. This work develops a dispersion-engineered inverse design framework that enables 3D frequency-reconfigurable holography through a twisted metasurface system. The physical implementation is based on a compact layered configuration that cascades the broadband radiation-type metasurface (RA-M) and phase-only metasurface (P-M). The RA-M provides a phase-adjustable input to excite P-M, while the rotation of P-M creates a reconfigurable response of holograms. By employing the proposed scheme, dynamic switching of frequency-space multiplexing and achromatic holograms are designed and experimentally demonstrated in the microwave region. This method advances flexible dispersion engineering for metasurface-based holography, and the compact system holds significant potential for applications in ultra-broadband imaging, high-capacity optical display, and switchable meta-devices.

physics.optics↗

arXiv2025

Cat-Eye Inspired Active-Passive-Composite Aperture-Shared Sub-Terahertz Meta-Imager for Non-Interactive Concealed Object Detection

Within the feline eye, a distinctive tapetum lucidum as a mirror resides posterior to the retina, reflecting the incident rays to simulate light source emission. This secondary emission property enables felines to be highly sensitive to light, possessing remarkable visual capabilities even in dark settings. Drawing inspiration from this natural phenomenon, we propose an active-passive-composite sub-terahertz meta-imager integrated with a bifocus metasurface, a high-sensitivity radiometer, and a low-power signal hidden radiation source. Benefiting from its aperture-shared advantage, this advanced fusion imaging system, enabled to be deployed by a simplified portable hardware platform, allows for the concurrent acquisition of active and passive electromagnetic properties to extend the target detection category and realize multi-mode fusion perception. Notably, it also enables the extraction of radiation and reflection characteristics without additional calibration modules. Experiments demonstrate the multi-target fusion imaging and localized information decoupling with the tailored field of view and emission energy. This compact and multi-mode fusion imaging system may have plenty of potential for airplane navigation positioning, abnormal monitoring, and non-interactive concealed security checks.

physics.optics↗

arXiv2025

Residual-MPPI: Online Policy Customization for Continuous Control

Policies developed through Reinforcement Learning (RL) and Imitation Learning (IL) have shown great potential in continuous control tasks, but real-world applications often require adapting trained policies to unforeseen requirements. While fine-tuning can address such needs, it typically requires additional data and access to the original training metrics and parameters. In contrast, an online planning algorithm, if capable of meeting the additional requirements, can eliminate the necessity for extensive training phases and customize the policy without knowledge of the original training scheme or task. In this work, we propose a generic online planning algorithm for customizing continuous-control policies at the execution time, which we call Residual-MPPI. It can customize a given prior policy on new performance metrics in few-shot and even zero-shot online settings, given access to the prior action distribution alone. Through our experiments, we demonstrate that the proposed Residual-MPPI algorithm can accomplish the few-shot/zero-shot online policy customization task effectively, including customizing the champion-level racing agent, Gran Turismo Sophy (GT Sophy) 1.0, in the challenging car racing scenario, Gran Turismo Sport (GTS) environment. Code for MuJoCo experiments is included in the supplementary and will be open-sourced upon acceptance. Demo videos and code are available on our website: https://sites.google.com/view/residual-mppi.

cs.RO↗

arXiv2025

TD-M(PC)$^2$: Improving Temporal Difference MPC Through Policy Constraint

Model-based reinforcement learning algorithms that combine model-based planning and learned value/policy prior have gained significant recognition for their high data efficiency and superior performance in continuous control. However, we discover that existing methods that rely on standard SAC-style policy iteration for value learning, directly using data generated by the planner, often result in \emph{persistent value overestimation}. Through theoretical analysis and experiments, we argue that this issue is deeply rooted in the structural policy mismatch between the data generation policy that is always bootstrapped by the planner and the learned policy prior. To mitigate such a mismatch in a minimalist way, we propose a policy regularization term reducing out-of-distribution (OOD) queries, thereby improving value learning. Our method involves minimum changes on top of existing frameworks and requires no additional computation. Extensive experiments demonstrate that the proposed approach improves performance over baselines such as TD-MPC2 by large margins, particularly in 61-DoF humanoid tasks. View qualitative results at https://darthutopian.github.io/tdmpc_square/.

cs.LG↗

arXiv2024

Human-Guided Image Generation for Expanding Small-Scale Training Image Datasets

The performance of computer vision models in certain real-world applications (e.g., rare wildlife observation) is limited by the small number of available images. Expanding datasets using pre-trained generative models is an effective way to address this limitation. However, since the automatic generation process is uncontrollable, the generated images are usually limited in diversity, and some of them are undesired. In this paper, we propose a human-guided image generation method for more controllable dataset expansion. We develop a multi-modal projection method with theoretical guarantees to facilitate the exploration of both the original and generated images. Based on the exploration, users refine the prompts and re-generate images for better performance. Since directly refining the prompts is challenging for novice users, we develop a sample-level prompt refinement method to make it easier. With this method, users only need to provide sample-level feedback (e.g., which samples are undesired) to obtain better prompts. The effectiveness of our method is demonstrated through the quantitative evaluation of the multi-modal projection method, improved model performance in the case study for both classification and object detection tasks, and positive feedback from the experts.

cs.CV↗

arXiv2024

Active Prompting with Chain-of-Thought for Large Language Models

The increasing scale of large language models (LLMs) brings emergent abilities to various complex tasks requiring reasoning, such as arithmetic and commonsense reasoning. It is known that the effective design of task-specific prompts is critical for LLMs' ability to produce high-quality answers. In particular, an effective approach for complex question-and-answer tasks is example-based prompting with chain-of-thought (CoT) reasoning, which significantly improves the performance of LLMs. However, current CoT methods rely on a fixed set of human-annotated exemplars, which are not necessarily the most effective examples for different tasks. This paper proposes a new method, Active-Prompt, to adapt LLMs to different tasks with task-specific example prompts (annotated with human-designed CoT reasoning). For this purpose, we propose a solution to the key problem of determining which questions are the most important and helpful ones to annotate from a pool of task-specific queries. By borrowing ideas from the related problem of uncertainty-based active learning, we introduce several metrics to characterize the uncertainty so as to select the most uncertain questions for annotation. Experimental results demonstrate the superiority of our proposed method, achieving state-of-the-art on eight complex reasoning tasks. Further analyses of different uncertainty metrics, pool sizes, zero-shot learning, and accuracy-uncertainty relationship demonstrate the effectiveness of our method. Our code will be available at https://github.com/shizhediao/active-prompt.

cs.CL↗

arXiv2024

Dim Small Target Detection and Tracking: A Novel Method Based on Temporal Energy Selective Scaling and Trajectory Association

The detection and tracking of small targets in passive optical remote sensing (PORS) has broad applications. However, most of the previously proposed methods seldom utilize the abundant temporal features formed by target motion, resulting in poor detection and tracking performance for low signal-to-clutter ratio (SCR) targets. In this article, we analyze the difficulty based on spatial features and the feasibility based on temporal features of realizing effective detection. According to this analysis, we use a multi-frame as a detection unit and propose a detection method based on temporal energy selective scaling (TESS). Specifically, we investigated the composition of intensity temporal profiles (ITPs) formed by pixels on a multi-frame detection unit. For the target-present pixel, the target passing through the pixel will bring a weak transient disturbance on the ITP and introduce a change in the statistical properties of ITP. We use a well-designed function to amplify the transient disturbance, suppress the background and noise components, and output the trajectory of the target on the multi-frame detection unit. Subsequently, to solve the contradiction between the detection rate and the false alarm rate brought by the traditional threshold segmentation, we associate the temporal and spatial features of the output trajectory and propose a trajectory extraction method based on the 3D Hough transform. Finally, we model the trajectory of the target and propose a trajectory-based multi-target tracking method. Compared with the various state-of-the-art detection and tracking methods, experiments in multiple scenarios prove the superiority of our proposed methods.

cs.CV↗

arXiv2023

High energy beam energy measurement with microwave-electron Compton backscattering

The uncertainty of the energy measurement of the electron beam on circular electron positron collider (CEPC) must be smaller than 10$\mathrm{MeV}$ to make sure the accurate measurement of the mass of the Higgs boson. In order to simplify the energy measurement system, a new method is proposed by fitting the Compton edge of the energy distribution of the gamma ray from a microwave-electron Compton scattering. With our method, the uncertainty of the energy measurement is 6$\mathrm{MeV}$ for the electron energy of $120\mathrm{GeV}$ in the Higgs mode. In this system, the energy resolution of the gamma detection needs to reach $10^{-4}$. Therefore, only the high-purity germanium (HPGe) detector can meet the critical requirement. In a head-on collision mode, the initial photons should be microwave photons with the wavelength of 3.04 centimeters. A cylindrical resonant cavity with selected ${TM_{010}}$ mode is used to transmit microwaves. After the microwave-electron Compton backscattering, the scattered photons and the synchrotron-radiation background transmit a shielding structure and then are detected by a HPGe detector at the end of the beam line of the synchrotron-radiation applications. The hole radius in the side wall of the cavity is about $1.5\mathrm{mm}$ to allow the electron beam passing through. The results of the computer simulation technology (CST) software shows that the influence of the hole radius on the cavity field is negligible. The change of the resonance frequency can be easily corrected by fine-tuning the cavity size.

hep-ex↗

arXiv2023

An Open Dataset of Sensor Data from Soil Sensors and Weather Stations at Production Farms

Weather and soil conditions are particularly important when it comes to farming activities. Study of these factors and their role in nutrient and nitrate absorption rates can lead to useful insights with benefits for both the crop yield and the protection of the environment through the more controlled use of fertilizers and chemicals. There is a paucity of public data from rural, agricultural sensor networks. This is partly due to the unique challenges faced during the deployment and maintenance of IoT networks in rural agricultural areas. As part of a 5-year project called WHIN we have been deploying and collecting sensor data from production and experimental agricultural farms in and around Purdue University in Indiana. Here we release a dataset comprising soil sensor data from a representative sample of 3 nodes across 3 production farms, each for 5 months. We correlate this data with the weather data and draw some insights about the absorption of rain in the soil. We provide the dataset at: https://purduewhin.ecn.purdue.edu/dataset2021.

cs.CY↗

arXiv2022

Automatic Facial Paralysis Estimation with Facial Action Units

Facial palsy is unilateral facial nerve weakness or paralysis of rapid onset with unknown causes. Automatically estimating facial palsy severeness can be helpful for the diagnosis and treatment of people suffering from it across the world. In this work, we develop and experiment with a novel model for estimating facial palsy severity. For this, an effective Facial Action Units (AU) detection technique is incorporated into our model, where AUs refer to a unique set of facial muscle movements used to describe almost every anatomically possible facial expression. In this paper, we propose a novel Adaptive Local-Global Relational Network (ALGRNet) for facial AU detection and use it to classify facial paralysis severity. ALGRNet mainly consists of three main novel structures: (i) an adaptive region learning module that learns the adaptive muscle regions based on the detected landmarks; (ii) a skip-BiLSTM that models the latent relationships among local AUs; and (iii) a feature fusion&refining module that investigates the complementary between the local and global face. Quantitative results on two AU benchmarks, i.e., BP4D and DISFA, demonstrate our ALGRNet can achieve promising AU detection accuracy. We further demonstrate the effectiveness of its application to facial paralysis estimation by migrating ALGRNet to a facial paralysis dataset collected and annotated by medical professionals.

cs.CV↗

arXiv2021

ORPHEUS: Living Labs for End-to-End Data Infrastructures for Digital Agriculture

IoT networks are being used to collect, analyze, and utilize sensor data. There are still some key requirements to leverage IoT networks in digital agriculture, e.g., design and deployment of energy saving and ruggedized sensor nodes (SN), reliable and long-range wireless network connectivity, end-to-end data collection pipelines for batch and streaming data. Thus, we introduce our living lab ORPHEUS and its design and implementation trajectory to showcase our orchestrated testbed of IoT sensors, data connectivity, database orchestration, and visualization dashboard. We deploy light-weight energy saving SNs in the field to collect data, using LoRa (Long Range wireless) to transmit data from the SNs to the Gateway node, upload all the data to the database server, and finally visualize the data. For future exploration, we also built a testbed of embedded devices using four different variants of NVIDIA Jetson development modules (Nano, TX2, Xavier NX, AGX Xavier) to benchmark the potential upgrade choices for SNs in ORPHEUS. Based on our deployment in multiple farms in a 3-county region around Purdue University, and on the Purdue University campus, we present analyses from our living lab deployment and additional components of the next-generation IoT farm.

cs.NI↗

arXiv2021

ApproxNet: Content and Contention-Aware Video Analytics System for Embedded Clients

Videos take a lot of time to transport over the network, hence running analytics on the live video on embedded or mobile devices has become an important system driver. Considering that such devices, e.g., surveillance cameras or AR/VR gadgets, are resource constrained, creating lightweight deep neural networks (DNNs) for embedded devices is crucial. None of the current approximation techniques for object classification DNNs can adapt to changing runtime conditions, e.g., changes in resource availability on the device, the content characteristics, or requirements from the user. In this paper, we introduce ApproxNet, a video object classification system for embedded or mobile clients. It enables novel dynamic approximation techniques to achieve desired inference latency and accuracy trade-off under changing runtime conditions. It achieves this by enabling two approximation knobs within a single DNN model, rather than creating and maintaining an ensemble of models (e.g., MCDNN [MobiSys-16]. We show that ApproxNet can adapt seamlessly at runtime to these changes, provides low and stable latency for the image and video frame classification problems, and show the improvement in accuracy and latency over ResNet [CVPR-16], MCDNN [MobiSys-16], MobileNets [Google-17], NestDNN [MobiCom-18], and MSDNet [ICLR-18].

cs.CV↗

arXiv2021

1st Place Solutions for UG2+ Challenge 2021 -- (Semi-)supervised Face detection in the low light condition

In this technical report, we briefly introduce the solution of our team "TAL-ai" for (Semi-) supervised Face detection in the low light condition in UG2+ Challenge in CVPR 2021. By conducting several experiments with popular image enhancement methods and image transfer methods, we pulled the low light image and the normal image to a more closer domain. And it is observed that using these data to training can achieve better performance. We also adapt several popular object detection frameworks, e.g., DetectoRS, Cascade-RCNN, and large backbone like Swin-transformer. Finally, we ensemble several models which achieved mAP 74.89 on the testing set, ranking 1st on the final leaderboard.

cs.CV↗

arXiv2021

GLGE: A New General Language Generation Evaluation Benchmark

Multi-task benchmarks such as GLUE and SuperGLUE have driven great progress of pretraining and transfer learning in Natural Language Processing (NLP). These benchmarks mostly focus on a range of Natural Language Understanding (NLU) tasks, without considering the Natural Language Generation (NLG) models. In this paper, we present the General Language Generation Evaluation (GLGE), a new multi-task benchmark for evaluating the generalization capabilities of NLG models across eight language generation tasks. For each task, we continue to design three subtasks in terms of task difficulty (GLGE-Easy, GLGE-Medium, and GLGE-Hard). This introduces 24 subtasks to comprehensively compare model performance. To encourage research on pretraining and transfer learning on NLG models, we make GLGE publicly available and build a leaderboard with strong baselines including MASS, BART, and ProphetNet (The source code and dataset are publicly available at https://github.com/microsoft/glge).

cs.CL↗

arXiv2020

JANUS: Benchmarking Commercial and Open-Source Cloud and Edge Platforms for Object and Anomaly Detection Workloads

With diverse IoT workloads, placing compute and analytics close to where data is collected is becoming increasingly important. We seek to understand what is the performance and the cost implication of running analytics on IoT data at the various available platforms. These workloads can be compute-light, such as outlier detection on sensor data, or compute-intensive, such as object detection from video feeds obtained from drones. In our paper, JANUS, we profile the performance/$ and the compute versus communication cost for a compute-light IoT workload and a compute-intensive IoT workload. In addition, we also look at the pros and cons of some of the proprietary deep-learning object detection packages, such as Amazon Rekognition, Google Vision, and Azure Cognitive Services, to contrast with open-source and tunable solutions, such as Faster R-CNN (FRCNN). We find that AWS IoT Greengrass delivers at least 2X lower latency and 1.25X lower cost compared to all other cloud platforms for the compute-light outlier detection workload. For the compute-intensive streaming video analytics task, an opensource solution to object detection running on cloud VMs saves on dollar costs compared to proprietary solutions provided by Amazon, Microsoft, and Google, but loses out on latency (up to 6X). If it runs on a low-powered edge device, the latency is up to 49X lower.

cs.CV↗

arXiv2020

ApproxDet: Content and Contention-Aware Approximate Object Detection for Mobiles

Advanced video analytic systems, including scene classification and object detection, have seen widespread success in various domains such as smart cities and autonomous transportation. With an ever-growing number of powerful client devices, there is incentive to move these heavy video analytics workloads from the cloud to mobile devices to achieve low latency and real-time processing and to preserve user privacy. However, most video analytic systems are heavyweight and are trained offline with some pre-defined latency or accuracy requirements. This makes them unable to adapt at runtime in the face of three types of dynamism -- the input video characteristics change, the amount of compute resources available on the node changes due to co-located applications, and the user's latency-accuracy requirements change. In this paper we introduce ApproxDet, an adaptive video object detection framework for mobile devices to meet accuracy-latency requirements in the face of changing content and resource contention scenarios. To achieve this, we introduce a multi-branch object detection kernel (layered on Faster R-CNN), which incorporates a data-driven modeling approach on the performance metrics, and a latency SLA-driven scheduler to pick the best execution branch at runtime. We couple this kernel with approximable video object tracking algorithms to create an end-to-end video object detection system. We evaluate ApproxDet on a large benchmark video dataset and compare quantitatively to AdaScale and YOLOv3. We find that ApproxDet is able to adapt to a wide variety of contention and content characteristics and outshines all baselines, e.g., it achieves 52% lower latency and 11.1% higher accuracy over YOLOv3.

cs.CV↗