arXiv subjects

Peter Ercius

Publications and source records attributed to Peter Ercius.

At least 37 records · Page 2Linked to original sources

arXiv2022

Real-time 3D analysis during electron tomography using tomviz

The demand for high-throughput electron tomography is rapidly increasing in biological and material sciences. However, this 3D imaging technique is computationally bottlenecked by alignment and reconstruction which runs from hours to days. We demonstrate real-time tomography with dynamic 3D tomographic visualization to enable rapid interpretation of specimen structure immediately as data is collected on an electron microscope. Using geometrically complex chiral nanoparticles, we show volumetric interpretation can begin in less than 10 minutes and a high quality tomogram is available within 30 minutes. Real time tomography is integrated into tomviz, an open source and cross platform 3D analysis tool that contains intuitive graphical user interfaces (GUI) to enable any scientist to characterize biological and material structure in 3D.

cond-mat.mtrl-sci↗

arXiv2022

Hyperspectral imaging of excitons within a moiré unit-cell with a sub-nanometer electron probe

Electronic and optical excitations in two-dimensional moiré systems are uniquely sensitive to local atomic registries, leading to materials- and twist-angle specific correlated electronic ground states with varied degree of localization. However, there has been no direct experimental correlation between the sub-nanometer structure and emergent excitonic transitions, comprising tightly-bound pairs of photoexcited electrons and holes. Here, we use cryogenic transmission electron microscopy and spectroscopy to simultaneously image the structural reconstruction and associated localization of the lowest-energy intralayer exciton in a rotationally aligned heterostructure of WS2 and WSe2 monolayers. In conjunction with optical spectroscopy and ab initio calculations, we determine that the exciton center-of-mass wavefunction is strongly modulated in space, confined to a radius of ~ 2 nm around the highest-energy stacking site in the moiré unit-cell, forming a triangular lattice. Our results provide direct evidence that atomic reconstructions lead to the strongly confining moiré potentials and that engineering strain at the nanoscale will enable new types of excitonic lattices.

cond-mat.mtrl-sci↗

arXiv2022

Hard ferromagnetism down to the thinnest limit of iron-intercalated tantalum disulfide

Two-dimensional (2D) magnetic crystals hold promise for miniaturized and ultralow power electronic devices that exploit spin manipulation. In these materials, large, controllable magnetocrystalline anisotropy is a prerequisite for the stabilization and manipulation of long-range magnetic order. In known 2D magnetic crystals, relatively weak magnetocrystalline anisotropy results in typically soft ferromagnetism. Here, we demonstrate that ferromagnetic order persists down to the thinnest limit of Fe$_x$TaS$_2$ (Fe-intercalated bilayer 2H-TaS$_2$) with giant coercivities up to 3 tesla. We prepare Fe-intercalated TaS$_2$ by chemical intercalation of van der Waals layered 2H-TaS$_2$ crystals and perform variable-temperature quantum transport, transmission electron microscopy, and confocal Raman spectroscopy measurements to shed new light on the coupled effects of dimensionality, degree of intercalation, and intercalant order/disorder on the hard ferromagnetic behavior of Fe$_x$TaS$_2$. More generally, we show that chemical intercalation gives access to a rich synthetic parameter space for low-dimensional magnets, in which magnetic properties can be tailored by the choice of the host material and intercalant identity/amount, in addition to the manifold distinctive degrees of freedom available in atomically thin, van der Waals crystals.

cond-mat.mtrl-sci↗

arXiv2022

Strong structural and electronic coupling in metavalent PbS moire superlattices

Moire superlattices are twisted bilayer materials, in which the tunable interlayer quantum confinement offers access to new physics and novel device functionalities. Previously, moire superlattices were built exclusively using materials with weak van der Waals interactions and synthesizing moire superlattices with strong interlayer chemical bonding was considered to be impractical. Here using lead sulfide (PbS) as an example, we report a strategy for synthesizing of moire superlattices coupled by strong chemical bonding. We use water-soluble ligands as a removable template to obtain free-standing ultra-thin PbS nanosheets and assemble them into direct-contact bilayers with various twist angles. Atomic-resolution imaging shows the moire periodic structural reconstruction at superlattice interface, due to the strong metavalent coupling. Electron energy loss spectroscopy and theoretical calculations collectively reveal the twist angle26 dependent electronic structure, especially the emergent separation of flat bands at small twist angles. The localized states of flat bands are similar to well-arranged quantum dots, promising an application in devices. This study opens a new door to the exploration of deep energy modulations within moire superlattices alternative to van der Waals twistronics.

cond-mat.mtrl-sci↗

arXiv2022

Revealing 3-dimensional core-shell interface structures at the single-atom level

Nanomaterials with core-shell architectures are prominent examples of strain-engineered materials, where material properties can be designed by fine-tuning the misfit strain at the interface. Here, we elucidate the full 3D atomic structure of Pd@Pt core-shell nanoparticles at the single-atom level via atomic electron tomography. Full 3D displacement fields and strain profiles of core-shell nanoparticles were obtained, which revealed a direct correlation between the surface and interface strain. It also showed clear Poisson effects at the scale of the full nanoparticle as well as the local atomic bonds. The strain distributions show a strong shape-dependent anisotropy, whose nature was further corroborated by molecular statics simulations. From the observed surface strains, the surface oxygen reduction reaction activities were predicted. These findings give a deep understanding of structure-property relationships in strain-engineerable core-shell systems, which could pave a new way toward direct control over the resulting catalytic properties.

cond-mat.mtrl-sci↗

arXiv2022

Solving Complex Nanostructures With Ptychographic Atomic Electron Tomography

Transmission electron microscopy (TEM) is a potent technique for the determination of three-dimensional atomic scale structure of samples in structural biology and materials science. In structural biology, three-dimensional structures of proteins are routinely determined using phase-contrast single-particle cryo-electron microscopy from thousands of identical proteins, and reconstructions have reached atomic resolution for specific proteins. In materials science, three-dimensional atomic structures of complex nanomaterials have been determined using a combination of annular dark field (ADF) scanning transmission electron microscopic (STEM) tomography and subpixel localization of atomic peaks, in a method termed atomic electron tomography (AET). However, neither of these methods can determine the three-dimensional atomic structure of heterogeneous nanomaterials containing light elements. Here, we perform mixed-state electron ptychography from 34.5 million diffraction patterns to reconstruct a high-resolution tilt series of a double wall-carbon nanotube (DW-CNT), encapsulating a complex $\mathrm{ZrTe}$ sandwich structure. Class averaging of the resulting reconstructions and subpixel localization of the atomic peaks in the reconstructed volume reveals the complex three-dimensional atomic structure of the core-shell heterostructure with 17 picometer precision. From these measurements, we solve the full $\mathrm{Zr_{11}Te_{50}}$ structure, which contains a previously unobserved $\mathrm{ZrTe_{2}}$ phase in the core. The experimental realization of ptychographic atomic electron tomography (PAET) will allow for structural determination of a wide range of nanomaterials which are beam-sensitive or contain light elements.

physics.app-ph↗

arXiv2022

Pervasive beyond room-temperature ferromagnetism in a doped van der Waals magnet: Ni doped Fe$_5$GeTe$_2$ with $T_{\text{C}}$ up to 478 K

The existence of long range magnetic order in low dimensional magnetic systems, such as the quasi-two-dimensional (2D) van der Waals (vdW) magnets, has attracted intensive studies of new physical phenomena. The vdW Fe$_N$GeTe$_2$ ($N$ = 3, 4, 5; FGT) family is exceptional owing to its vast tunability of magnetic properties. Particularly, a ferromagnetic ordering temperature ($T_{\text{C}}$) above room temperature at $N$ = 5 (F5GT) is observed. Here, our study shows that, by nickel (Ni) substitution of iron (Fe) in F5GT, a record high $T_{\text{C}}$ = 478(6) K is achieved. Importantly, pervasive, beyond-room-temperature ferromagnetism exists in almost the entire doping range of the phase diagram of Ni-F5GT. We argue that this striking observation in Ni-F5GT can be possibly due to several contributing factors, in which the structural alteration enhanced 3D magnetic couplings might be critical for enhancing the ferromagnetic order.

cond-mat.mtrl-sci↗

arXiv2022

Symmetry-Breaking and Self-Sorting in Block Copolymer-based Multicomponent Nanocomposites

Co-assembly of inorganic nanoparticles (NPs) and nanostructured polymer matrix represents an intricate interplay of enthalpic or entropic forces. Particle size largely affects the phase behavior of the nanocomposite. Theoretical studies indicate that new morphologies would emerge when the particles become comparable to the soft matrix's size, but this has rarely been supported experimentally. By designing a multicomponent blend composed of NPs, block copolymer-based supramolecules, and small molecules, a 3-D ordered lattice beyond the native BCP's morphology was recently reported when the particle is larger than the microdomain of BCP. The blend can accommodate various formulation variables. In this contribution, when the particle size equals the microdomain size, a symmetry-broken phase appears in a narrow range of particle sizes and compositions, which we named the "train track" structure. In this phase, the NPs aligned into a 3-D hexagonal lattice and packed asymmetrically along the c axis, making the projection of the ac and the bc plane resemble train tracks. Computation studies show that the broken symmetry reduces the polymer chain deformation and stabilizes the metastable hexagonally perforated lamellar morphology. Given the mobility of the multicomponent blend, the system shows a self-sorting behavior: segregating into two macroscopic phases with different nanostructures based on only a few nanometers NP size differences. Smaller NPs form "train track" morphology, while larger NPs form "simple hexagon" structure, where the NPs take a symmetric hexagonal arrangement. Detailed structural evolution and simulation studies confirm the systematic-wide cooperativity across different components, indicating the strong self-regulation of the multicomponent system.

cond-mat.soft↗

arXiv2022

Deep Learning Coherent Diffractive Imaging

We report the development of deep learning coherent electron diffractive imaging at sub-angstrom resolution using convolutional neural networks (CNNs) trained with only simulated data. We experimentally demonstrate this method by applying the trained CNNs to directly recover the phase images from electron diffraction patterns of twisted hexagonal boron nitride, monolayer graphene and a Au nanoparticle with comparable quality to those reconstructed by a conventional ptychographic method. Fourier ring correlation between the CNN and ptychographic images indicates the achievement of a spatial resolution in the range of 0.70 and 0.55 angstrom (depending on different resolution criteria). The ability to replace iterative algorithms with CNNs and perform real-time imaging from coherent diffraction patterns is expected to find broad applications in the physical and biological sciences.

cond-mat.mtrl-sci↗

arXiv2022

Atomic-scale identification of the active sites of nanocatalysts

Alloy nanocatalysts have found broad applications ranging from fuel cells to catalytic converters and hydrogenation reactions. Despite extensive studies, identifying the active sites of nanocatalysts remains a major challenge due to the heterogeneity of the local atomic environment. Here, we advance atomic electron tomography to determine the 3D local atomic structure, surface morphology and chemical composition of PtNi and Mo-doped PtNi nanocatalysts. Using machine learning trained by density functional theory calculations, we identify the catalytic active sites for the oxygen reduction reaction from experimental 3D atomic coordinates, which are corroborated by electrochemical measurements. By quantifying the structure-activity relationship, we discover a local environment descriptor to explain and predict the catalytic active sites at the atomic level. The ability to determine the 3D atomic structure and chemical species coupled with machine learning is expected to expand our fundamental understanding of a wide range of nanocatalysts.

physics.chem-ph↗

arXiv2021

Multi-scale characterization of hexagonal Si-4H: a hierarchical nanostructured material

In this work we present a detailed structural characterization of Si-4H, a newly discovered bulk form of hexagonal silicon (Si) with potential optoelectronic applications. Using multi-scale imaging, we reveal a hierarchical structure in the morphology of Si-4H obtained from high-pressure synthesis. We demonstrate discrete structural units, platelets, at an intermediate length-scale between the bulk pellets synthesized at high pressures and the flake-like crystallites inferred in previous studies. Direct observation of the platelets reveals their 2D structure, with planar faces spanning hundreds of nanometers to a few micrometers and thicknesses of only tens of nanometers. We separated and dispersed small packets of quasi-single platelets, which enabled us to analyze the crystalline domains within each grain. With this view, we demonstrate that Si-4H platelets represent the smallest crystalline structural units, which can bend at the single-domain level. Our characterization of the quasi-2D, flexible platelets of hexagonal Si-4H and proof of concept that the platelets can be dispersed and manipulated quite simply demonstrate opportunities to design novel optoelectronic and solar devices.

cond-mat.mtrl-sci↗

arXiv2021

A room temperature polar ferromagnetic metal

The advent of long-range magnetic order in non-centrosymmetric compounds has stimulated interest in the possibility of exotic spin transport phenomena and topologically protected spin textures for applications in next-generation spintronics. This work reports a novel wurtzite-structure polar magnetic metal, identified as AA'-stacked (Fe0.5Co0.5)5-xGeTe2, which exhibits a Neel-type skyrmion lattice as well as a Rashba-Edelstein effect at room temperature. Atomic resolution imaging of the structure reveals a structural transition as a function of Co-substitution, leading to the polar phase at 50% Co. This discovery reveals an unprecedented layered polar magnetic system for investigating intriguing spin topologies and ushers in a promising new framework for spintronics.

cond-mat.mtrl-sci↗

arXiv2021

Real-time interactive 4D-STEM phase-contrast imaging from electron event representation data

The arrival of direct electron detectors (DED) with high frame-rates in the field of scanning transmission electron microscopy has enabled many experimental techniques that require collection of a full diffraction pattern at each scan position, a field which is subsumed under the name four dimensional-scanning transmission electron microscopy (4D-STEM). DED frame rates approaching 100 kHz require data transmission rates and data storage capabilities that exceed commonly available computing infrastructure. Current commercial DEDs allow the user to make compromises in pixel bit depth, detector binning or windowing to reduce the per-frame file size and allow higher frame rates. This change in detector specifications requires decisions to be made before data acquisition that may reduce or lose information that could have been advantageous during data analysis. The 4D Camera, a DED with 87 kHz frame-rate developed at Lawrence Berkeley National Laboratory, reduces the raw data to a linear-index encoded electron event representation (EER). Here we show with experimental data from the 4D Camera that linear-index encoded EER and its direct use in 4D-STEM phase contrast imaging methods enables real-time, interactive phase-contrast from large-area 4D-STEM datasets. We detail the computational complexity advantages of the EER and the necessary computational steps to achieve real-time interactive ptychography and center-of-mass differential phase contrast using commonly available hardware accelerators.

cond-mat.mtrl-sci↗

arXiv2020

Ultra-Narrow TaS2 Nanoribbons

Imposing additional confinement in two-dimensional (2D) materials can yield further control over the associated electronic, optical, and topological properties. However, synthesis of ultra-narrow nanoribbons (NRs) remains a challenge, particularly for the transition metal dichalcogenides (TMDs), and synthesizing TMD NRs narrower than 50 nm has remained elusive. Here, we report the vapor-phase synthesis of ultra-narrow TaS2 NRs. The NRs are grown within the hollow cavity of carbon nanotubes, thereby limiting their lateral dimensions and layer number, while simultaneously stabilizing them against the environment. The NRs reach the monolayer (ML) limit and exhibit widths as low as 2.5 nm. Atomic-resolution scanning transmission electron microscopy (STEM) reveals the detailed atomic structure of the ultra-narrow NRs and we observe a hitherto unseen atomic structure supermodulation phenomenon of ordered defect arrays within the NRs. First-principles calculations based on density functional theory (DFT) show the presence of flat bands, as well as edge- and boundary-localized states, and help identify the atomic configuration of the supermodulation. Nanotube-templated synthesis represents a unique, transferable, and broadly deployable route toward ultra-narrow TMD NR growth.

cond-mat.mtrl-sci↗

arXiv2020

Direct observation of 3D atomic packing in monatomic amorphous materials

Liquids and solids are two fundamental states of matter. However, due to the lack of direct experimental determination, our understanding of the 3D atomic structure of liquids and amorphous solids remained speculative. Here we advance atomic electron tomography to determine for the first time the 3D atomic positions in monatomic amorphous materials, including a Ta thin film and two Pd nanoparticles. We observe that pentagonal bipyramids are the most abundant atomic motifs in these amorphous materials. Instead of forming icosahedra, the majority of pentagonal bipyramids arrange into networks that extend to medium-range scale. Molecular dynamic simulations further reveal that pentagonal bipyramid networks are prevalent in monatomic amorphous liquids, which rapidly grow in size and form icosahedra during the quench from the liquid state to glass state. The experimental method and results are expected to advance the study of the amorphous-crystalline phase transition and glass transition at the single-atom level.

cond-mat.mtrl-sci↗

arXiv2020

Determining the three-dimensional atomic structure of a metallic glass

Amorphous solids such as glass are ubiquitous in our daily life and have found broad applications ranging from window glass and solar cells to telecommunications and transformer cores. However, due to the lack of long-range order, the three-dimensional (3D) atomic structure of amorphous solids have thus far defied any direct experimental determination without model fitting. Here, using a multi-component metallic glass as a proof-of-principle, we advance atomic electron tomography to determine the 3D atomic positions in an amorphous solid for the first time. We quantitatively characterize the short-range order (SRO) and medium-range order (MRO) of the 3D atomic arrangement. We find that although the 3D atomic packing of the SRO is geometrically disordered, some SRO connect with each other to form crystal-like networks and give rise to MRO. We identify four crystal-like MRO networks - face-centred cubic, hexagonal close-packed, body-centered cubic and simple cubic - coexisting in the sample, which show translational but no orientational order. These observations confirm that the 3D atomic structure in some parts of the sample is consistent with the efficient cluster packing model. Looking forward, we anticipate this experiment will open the door to determining the 3D atomic coordinates of various amorphous solids, whose impact on non-crystalline solids may be comparable to the first 3D crystal structure solved by x-ray crystallography over a century ago.

cond-mat.dis-nn↗

arXiv2020

Stabilization of NbTe3, VTe3, and TiTe3 via Nanotube Encapsulation

The structure of MX3 transition metal trichalcogenides (TMTs, with M a transition metal and X a chalcogen) is typified by one-dimensional (1D) chains weakly bound together via van der Waals interactions. This structural motif is common across a range of M and X atoms (e.g. NbSe3, HfTe3, TaS3), but not all M and X combinations are stable. We report here that three new members of the MX3 family which are not stable in bulk, specifically NbTe3, VTe3, and TiTe3, can be synthesized in the few- to single-chain limit via nano-confined growth within the stabilizing cavity of multi-walled carbon nanotubes. Transmission electron microscopy (TEM) and atomic-resolution scanning transmission electron microscopy (STEM) reveal the chain-like nature and the detailed atomic structure. The synthesized materials exhibit behavior unique to few-chain quasi-1D structures, such as multi-chain spiraling and a trigonal anti-prismatic rocking distortion in the single-chain limit. Density functional theory (DFT) calculations provide insight into the crystal structure and stability of the materials, as well as their electronic structure.

cond-mat.mtrl-sci↗

arXiv2020

Antiferromagnetic Switching Driven by the Collective Dynamics of a Coexisting Spin Glass

The theory behind the electrical switching of antiferromagnets is premised on the existence of a well defined broken symmetry state that can be rotated to encode information. A spin glass is in many ways the antithesis of this state, characterized by an ergodic landscape of nearly degenerate magnetic configurations, choosing to freeze into a distribution of these in a manner that is seemingly bereft of information. In this study, we show that the coexistence of spin glass and antiferromagnetic order allows a novel mechanism to facilitate the switching of the antiferromagnet Fe$_{1/3+δ}$NbS$_2$, which is rooted in the electrically-stimulated collective winding of the spin glass. The local texture of the spin glass opens an anisotropic channel of interaction that can be used to rotate the equilibrium orientation of the antiferromagnetic state. The use of a spin glass' collective dynamics to electrically manipulate antiferromagnetic spin textures has never been applied before, opening the field of antiferromagnetic spintronics to many more material platforms with complex magnetic textures.

cond-mat.str-el↗