arXiv subjects

Peter G. Steeneken

Publications and source records attributed to Peter G. Steeneken.

At least 19 recordsLinked to original sources

arXiv2026

Optomechanical tuning of nonlinearity in graphene resonators

Graphene resonators exhibit unique mechanical and electrical properties, making them promising candidates for next-generation sensing applications. Here, we introduce an optomechanical approach that enables active, reversible, in situ tuning of the nonlinear nanomechanical response of graphene resonators. By exploiting photothermal heating and the resulting optomechanical interaction between the mechanical oscillations and the optical cavity formed by a graphene membrane suspended over a reflective substrate, we achieve dynamic control over both the linear restoring force and the nonlinear dynamic response of the resonator. We show that the strength and sign of the Duffing nonlinearity can be continuously tuned through the optical probe power and cavity depth, enabling transitions between hardening and softening behavior as well as near-complete suppression of geometric nonlinearities. Our results establish a versatile platform for on-demand engineering of nonlinear dynamics in graphene resonators and provide a general strategy for active control of the mechanical response of two-dimensional nanoelectromechanical systems.

cond-mat.mes-hall↗

arXiv2026

Magnomechanical Coupling in Suspended 2D van der Waals Ferromagnets

Magnomechanical systems provide a promising route for exploring coherent hybrid magnon-phonon interactions and hybrid information processing, but their realization has so far been limited by weak magnon-phonon coupling in conventional bulk platforms. We show that a suspended membrane of a two-dimensional van der Waals ferromagnet with in-plane magnetization and out-of-plane mechanical oscillations exhibits large magnomechanical coupling dominated by magnetoelastic interactions. The parametric single magnon-phonon coupling rate scales linearly with pre-strain and can reach hundreds of Hertz to low kiloHertz in suspended membranes of van der Waals ferromagnets such as CrGeTe_3 under experimentally realistic conditions. This rate exceeds typical values reported for YIG spheres by more than three orders of magnitude. Our results demonstrate that suspended membranes of van der Waals magnets provide a robust and highly tunable platform for magnomechanics.

cond-mat.mes-hall↗

arXiv2026

Experimental Quantification of Nonlinear Mode Coupling in Nanomechanical Resonators using Multi-tone Excitation

Nonlinear modal interactions in resonant systems govern a wide range of phenomena, with broad relevance across modern physics and engineering. Yet, experimentally determining the strength of nonlinear coupling in multimode resonators remains highly challenging. Here, we introduce a multi-tone spectroscopy method for identifying nonlinear coupling coefficients directly from experimental data. Our approach employs dual-tone excitation near selected resonances which, in combination with additional probing tones at higher-order modes, generates sideband responses associated with specific modal couplings. These spectral signatures are analyzed using an inverse reconstruction procedure to quantitatively determine the corresponding nonlinear coupling strengths in the frequency domain. Using this method, we determine ten pairwise nonlinear coupling parameters across five modes of highly tensioned nanostrings, enabling the reconstruction of fully experimental, device-specific nonlinear reduced-order models. Our experimentally derived models show excellent agreement with values obtained numerically using finite element based nonlinear reduced-order models. Our method is generic and can be used for the characterization of diverse modal and intermodal couplings in mechanical and hybrid resonant systems.

cond-mat.mes-hall↗

arXiv2026

Capacitive Pixelated CMOS Electronic Nose

Although some of the human senses can nowadays be replaced by low-cost electronic sensors such as microphones and image sensors, a compact low-cost electronic nose (E-nose) remains elusive. In this work, an E-nose is presented that can capacitively detect volatile organic compounds (VOCs). The E-nose consists of an array of 1024 capacitive microelectrodes on a complementary metal-oxide-semiconductor (CMOS) chip, functionalized by inkjet printing. The pixels are coated with a UV-curable ink and metal-organic frameworks (MOFs: ZIF-8, MIL-101(Cr), MIL-140A) to create chemically diverse microdomains that generate gas-specific response patterns through adsorption-driven dielectric loading. ZIF-8 exhibits the highest response to 2-butanone, whereas the UV-curable layer responds most strongly to toluene; both show low cross-sensitivity to water vapor, enabling operation under humid conditions. After calibration in pure gases, reproducible responses to controlled binary mixtures of toluene and 2-butanone are observed. The device operates at low power, combines a large 1024-pixel array with CMOS integration, and offers application-specific functionalization by inkjet printing, providing both low cost and versatility. By further extending the range of functionalization materials, the E-nose can be applied to analyze a wide variety of gases, with potential applications in safety monitoring, health, agriculture, and robotics.

physics.app-ph↗

arXiv2026

Cascade of Modal Interactions in Nanomechanical Resonators with Soft Clamping

We uncover a chain of nonlinear modal interactions in softly clamped nanostring resonators. The process involves the sequential coupling of five mechanical modes, during frequency sweeps, yielding a broad nonlinear response with nearly constant amplitude. We demonstrate that soft clamping enables this cascaded energy transfer and amplifies the effective geometric nonlinearity of the driven mode by an order of magnitude. Analytical and finite element-based reduced-order models capture the key features of the coupling cascade and clarify its underlying mechanism. The phenomenon is generic in nonlinear vibrational systems and can be tailored through soft-clamping design strategies.

cond-mat.mes-hall↗

arXiv2025

Optomechanical method for characterizing thermal transport across van der Waals interfaces

For the development of nanoscale electronics and photonics using atomically thin two-dimensional (2D) materials, it is important to realize van der Waals (vdW) interfaces with low thermal resistance, to minimize performance reduction caused by heat accumulation. However, characterizing the thermal interface resistance between vdW materials is still a challenge. Here, we introduce a novel optomechanical methodology to characterize the thermal transport across interfaces in 2D heterostructures. We first determine the specific heat and thermal conductivity as the function of temperature for the upper and lower material layers separately and then extract the thermal boundary conductance (TBC) of the heterostructure from its thermal time constant. We obtain a TBC of $2.41 \pm 1.03$ and $4.14 \pm 1.74$~\si{MW m^{2} K^{-1}} for FePS$_3$/WSe$_2$ and MoS$_2$/FePS$_3$ interfaces, respectively, which are comparable to values reported in the literature. Moreover, they agree with a Debye model including the acoustic impedance mismatch of flexural phonons. This work enables efficient thermal management down to the nanoscale and offers new insights into energy dissipation in vdW heterostructures.

physics.app-ph↗

arXiv2025

Amorphous Silicon-Carbide Photonics for Ultrasound Imaging

Photonic ultrasound sensors offer unparalleled potential for improving spatial and temporal resolution in ultrasound imaging applications due to their size-independent noise figure, high sensitivity, and broad bandwidth characteristics. The exploration of optical materials in ultrasound sensing has attracted significant interest due to their potential to further enhance device performance, fabrication compatibility, and long-term stability. This work introduces amorphous silicon carbide (a-SiC) as a material for optical ultrasound sensing. a-SiC offers a balanced combination of optical confinement, low propagation loss, and high material stability, enabling sensitive and miniaturized microring sensors. We demonstrate a compact ultrasound detection system with a linear array of 20 transducers coupled to a single bus waveguide. The sensors feature a maximum optical finesse of 1320 and an intrinsic platform sensitivity of 78 fm/kPa, leading to a noise equivalent pressure density below 55 $\mathrm{mPa}/\sqrt{\mathrm{Hz}}$, which is calibrated to a hydrophone from 3.36 MHz to 30 MHz. Additionally, we perform high-resolution ultrasound imaging of fine structures, highlighting the viability of these sensors in real-world applications. Moreover, its low deposition temperature allows a-SiC material for optical ultrasound sensors to be integrated on most substrates. These results position a-SiC as a promising material for optical ultrasound sensing, offering a miniaturized, low-loss, and high-sensitivity solution for next-generation photoacoustic imaging applications.

physics.optics↗

arXiv2025

Thermoelastic Damping Across the Phase Transition in van der Waals Magnets

A quantitative understanding of the microscopic mechanisms responsible for damping in van der Waals nanomechanical resonators remains elusive. In this work, we investigate van der Waals magnets, where the thermal expansion coefficient exhibits an anomaly at the magnetic phase transition due to magnetoelastic coupling. Thermal expansion mediates the coupling between mechanical strain and heat flow and determines the strength of thermoelastic damping (TED). Consequently, variations in the thermal expansion coefficient are reflected directly in TED, motivating our focus on this mechanism. We extend existing TED models to incorporate anisotropic thermal conduction, a critical property of van der Waals materials. By combining the thermodynamic properties of the resonator material with the anisotropic TED model, we examine dissipation as a function of temperature. Our findings reveal a pronounced impact of the phase transition on dissipation, along with transitions between distinct dissipation regimes controlled by geometry and the relative contributions of in-plane and out-of-plane thermal conductivity. These regimes are characterized by the resonant interplay between strain and in-plane or through-plane heat propagation. To validate our theory, we compare it to experimental data of the temperature-dependent mechanical resonances of FePS$_3$ resonators.

cond-mat.mes-hall↗

arXiv2024

Actuation and mapping of SAW-induced high-frequency wavefields on suspended graphene membranes

High frequency acoustic devices based on two-dimensional (2D) materials are unique platforms to design and manipulate the spatiotemporal response of acoustic waves for next-generation sensing and contactless actuation applications. Conventional methods for actuating suspended membranes, however, cannot be applied to all 2D materials, or are limited in frequency. There is, therefore, a need for a universal high-frequency, on-chip actuation technique that can be applied to all types of membranes. Here, we demonstrate that surface acoustic waves (SAWs) can be used to efficiently actuate suspended 2D materials by exciting suspended graphene membranes with high-frequency (375 MHz) Rayleigh surface waves and mapping the resulting vibration field with atomic force acoustic microscopy (AFAM). Acoustic waves travelling from supported to suspended graphene experience a reduction in acoustic wavelength from 10 μm to ~2 μum due to the decrease in effective bending rigidity, leading to a decrease in wave velocity on suspended graphene. By varying the excitation frequency, we observed a change in phase velocity from ~160 m/s to ~700 m/s. This behavior is consistent with the nonlinear dispersion of acoustic waves, as predicted by plate theory, in suspended graphene membranes. The geometry and bending rigidity of the membrane thus play key roles in modulating the acoustic wave pattern and wavelength. This combined SAW actuation and AFAM visualization scheme can give new insights into the fundamentals of acoustic transport at the nanoscale limit and provides a route towards the manipulation of localized wavefields for on-chip patterning and transport over 2D materials surfaces.

cond-mat.mes-hall↗

arXiv2024

Optimizing Cladding Elasticity to Enhance Sensitivity in Silicon Photonic Ultrasound Sensors

Ultrasound is widely used in medical imaging, and emerging photo-acoustic imaging is crucial for disease diagnosis. Currently, high-end photo-acoustic imaging systems rely on piezo-electric materials for detecting ultrasound waves, which come with sensitivity, noise, and bandwidth limitations. Advanced applications demand a large matrix of broadband, high-resolution, and scalable ultrasound sensors. Silicon photonic circuits have been introduced to meet these requirements by detecting ultrasound-induced deformation and stress in silicon waveguides. Although higher sensitivities could facilitate the exploration of new applications, the high stiffness of the waveguide materials constrains the intrinsic sensitivity of the silicon photonic circuits to ultrasound signals. Here, we explore the impact of the mechanical properties of a polymer cladding on the sensitivity of silicon photonic ultrasound sensors. Our model and experiments reveal that optimizing the polymer cladding's stiffness enhances the resonance wavelength sensitivity. Experimentally, we show a fourfold increase in the sensitivity compared to the sensors without a cladding polymer and, a twofold sensitivity increase compared to the sensors with a cladding polymer of saturated cross-linking density. Interestingly, comparing experiments with the optomechanical model suggests that the change in Young's Modulus alone cannot explain the sensitivity increase. In conclusion, polymer-coated silicon photonic ultrasound sensors exhibit potential for advanced photo-acoustic imaging applications. It offers the prospect of increasing the ultrasound detection sensitivity of silicon photonic ultrasound sensors while using CMOS-compatible processes. This paves the way to integrate the polymer-coated silicon photonic ultrasound sensors with electronics to utilize the sensors in advanced medical imaging applications.

physics.optics↗

arXiv2024

Microsphere-assisted generation of localized optical emitters in 2D hexagonal boron nitride

Crystal defects in hexagonal boron nitride (hBN) are emerging as versatile nanoscale optical probes with a wide application profile, spanning the fields of nanophotonics, biosensing, bioimaging and quantum information processing. However, generating these crystal defects as reliable optical emitters remains challenging due to the need for deterministic defect placement and precise control of the emission area. Here, we demonstrate an approach that integrates microspheres (MS) with hBN optical probes to enhance both defect generation and optical signal readout. This technique harnesses MS to amplify light-matter interactions at the nanoscale through 2 two mechanisms: focused femtosecond (fs) laser irradiation into a photonic nanojet for highly localized defect generation, and enhanced light collection via the whispering gallery mode effect. Our MS-assisted defect generation method reduces the emission area by a factor of 5 and increases the fluorescence collection efficiency by approximately 10 times compared to MS-free samples. These advancements in defect generation precision and signal collection efficiency open new possibilities for optical emitter manipulation in hBN, with potential applications in quantum technologies and nanoscale sensing.

cond-mat.mes-hall↗

arXiv2024

Finite Element-based Nonlinear Dynamic Optimization of Nanomechanical Resonators

Nonlinear dynamic simulations of mechanical resonators have been facilitated by the advent of computational techniques that generate nonlinear reduced order models (ROMs) using the finite element (FE) method. However, designing devices with specific nonlinear characteristics remains inefficient since it requires manual adjustment of the design parameters and can result in suboptimal designs. Here, we integrate an FE-based nonlinear ROM technique with a derivative-free optimization algorithm to enable the design of nonlinear mechanical resonators. The resulting methodology is used to optimize the support design of high-stress nanomechanical Si3N4 string resonators, in the presence of conflicting objectives such as simultaneous enhancement of Q-factor and nonlinear Duffing constant. To that end, we generate Pareto frontiers that highlight the trade-offs between optimization objectives and validate the results both numerically and experimentally. To further demonstrate the capability of multi-objective optimization for practical design challenges, we simultaneously optimize the design of nanoresonators for three key figure-of-merits in resonant sensing: power consumption, sensitivity and response time. The presented methodology can facilitate and accelerate designing (nano)mechanical resonators with optimized performance for a wide variety of applications.

physics.app-ph↗

arXiv2024

Centimeter-scale nanomechanical resonators with low dissipation

High-aspect-ratio mechanical resonators are pivotal in precision sensing, from macroscopic gravitational wave detectors to nanoscale acoustics. However, fabrication challenges and high computational costs have limited the length-to-thickness ratio of these devices, leaving a largely unexplored regime in nano-engineering. We present nanomechanical resonators that extend centimeters in length yet retain nanometer thickness. We explore this expanded design space using an optimization approach which judiciously employs fast millimeter-scale simulations to steer the more computationally intensive centimeter-scale design optimization. By employing delicate nanofabrication techniques, our approach ensures high-yield realization, experimentally confirming room-temperature quality factors close to theoretical predictions. The synergy between nanofabrication, design optimization guided by machine learning, and precision engineering opens a solid-state path to room-temperature quality factors approaching 10 billion at kilohertz mechanical frequencies -- comparable to the performance of leading cryogenic resonators and levitated nanospheres, even under significantly less stringent temperature and vacuum conditions.

cond-mat.mes-hall↗

arXiv2023

Optomechanical methodology for characterizing the thermal properties of 2D materials

Heat transport in two-dimensions is fundamentally different from that in three dimensions. As a consequence, the thermal properties of 2D materials are of great interest, both from scientific and application point of view. However, few techniques are available for accurate determination of these properties in ultrathin suspended membranes. Here, we present an optomechanical methodology for extracting the thermal expansion coefficient, specific heat and thermal conductivity of ultrathin membranes made of 2H-TaS2, FePS3, polycrystalline silicon, MoS2 and WSe2. The obtained thermal properties are in good agreement with values reported in the literature for the same materials. Our work provides an optomechanical method for determining thermal properties of ultrathin suspended membranes, that are difficult to measure otherwise. It can does provide a route towards improving our understanding of heat transport in the 2D limit and facilitates engineering of 2D structures with dedicated thermal performance.

physics.app-ph↗

arXiv2023

Enhanced sensitivity and tunability of thermomechanical resonance near the buckling bifurcation

The high susceptibility of ultrathin two-dimensional (2D) material resonators to force and temperature makes them ideal systems for sensing applications and exploring thermomechanical coupling. Although the dynamics of these systems at high stress has been thoroughly investigated, their behavior near the buckling transition has received less attention. Here, we demonstrate that the force sensitivity and frequency tunability of 2D material resonators are significantly enhanced near the buckling bifurcation. This bifurcation is triggered by compressive displacement that we induce via thermal expansion of the devices, while measuring their dynamics via an optomechanical technique. We understand the frequency tuning of the devices through a mechanical buckling model, which allows to extract the central deflection and boundary compressive displacement of the membrane. Surprisingly, we obtain a remarkable enhancement of up to 14x the vibration amplitude attributed to a very low stiffness of the membrane at the buckling transition, as well as a high frequency tunability by temperature of more than 4.02 %/K. The presented results provide insights into the effects of buckling on the dynamics of free-standing 2D materials and thereby open up opportunities for the realization of 2D resonant sensors with buckling-enhanced sensitivity.

cond-mat.mes-hall↗

arXiv2023

Quantifying stress distribution in ultra-large graphene drums through mode shape imaging

Suspended drums made of 2D materials hold potential for sensing applications. However, the industrialization of these applications is hindered by significant device-to-device variations presumably caused by non-uniform stress distributions induced by the fabrication process. Here we introduce a new methodology to determine the stress distribution from their mechanical resonance frequencies and corresponding mode shapes as measured by a laser Doppler vibrometer (LDV). To avoid limitations posed by the optical resolution of the LDV, we leverage a unique manufacturing process to create ultra-large graphene drums with diameters of up to 1000 um. We solve the inverse problem of a Föppl--von Kármán plate model by an iterative procedure to obtain the stress distribution within the drums from the experimental data. Our results show that the generally used uniform pre-tension assumption overestimates the pre-stress value, exceeding the averaged stress obtained by more than 47%. Moreover, it is is found that the reconstructed stress distributions are bi-axial, which likely originates from the transfer process. The introduced metholodogy allows one to estimate the tension distribution in drum resonators from their mechanical response and thereby paves the way for linking the used fabrication processes to the resulting device performance.

physics.app-ph↗

arXiv2023

Nonlinear dynamics and magneto-elasticity of nanodrums near the phase transition

Nanomechanical resonances of two-dimensional (2D) materials are sensitive probes for condensed-matter physics, offering new insights into magnetic and electronic phase transitions. Despite extensive research, the influence of the spin dynamics near a second-order phase transition on the nonlinear dynamics of 2D membranes has remained largely unexplored. Here, we investigate nonlinear magneto-mechanical coupling to antiferromagnetic order in suspended FePS$_3$-based heterostructure membranes. By monitoring the motion of these membranes as a function of temperature, we observe characteristic features in both nonlinear stiffness and damping close to the Néel temperature $T_{\rm{N}}$. We account for these experimental observations with an analytical magnetostriction model in which these nonlinearities emerge from a coupling between mechanical and magnetic oscillations, demonstrating that magneto-elasticity can lead to nonlinear damping. Our findings thus provide insights into the thermodynamics and magneto-mechanical energy dissipation mechanisms in nanomechanical resonators due to the material's phase change and magnetic order relaxation.

cond-mat.mes-hall↗

arXiv2023

Beating ringdowns of near-degenerate mechanical resonances

Mechanical resonators that possess coupled modes with harmonic frequency relations have recently sparked interest due to their suitability for controllable energy transfer and non-Hermitian dynamics. Here, we show coupling between high Q-factor ($>\!\!10^4$) resonances with a nearly 1:1 frequency relation in spatially-symmetric microresonators. We develop and demonstrate a method to analyze their dynamical behavior based on the simultaneous and resonant detection of both spectral peaks, and validate this with experimental results. The frequency difference between the peaks modulates their ringdown, and creates a beat pattern in the linear decay. This method applies both to the externally driven and the Brownian motion (thermal) regime, and allows characterization of both linear and nonlinear parameters. The mechanism behind this method renders it broadly applicable to both optical and electrical readout, as well as to different mechanical systems. This will aid studies using near-degenerate mechanical modes, for e.g., optomechanical energy transfer, synchronization and gyroscopic sensors.

physics.app-ph↗