Searcharxiv⌕ Search

arXiv subjects

Peter Hansbo

Publications and source records attributed to Peter Hansbo.

At least 19 recordsLinked to original sources

A Cut Finite Element Method with Boundary Value Correction for Robin, Neumann and Interface Conditions

We extend the cut finite element method with boundary value correction of Burman, Hansbo and Larson [Math.\ Comp.\ 87 (2018) 633--657] to Robin and Neumann conditions and to interface problems with imperfect bonding. The formulation retains a piecewise affine boundary for all integration, while using the exact geometry only at boundary quadrature points. The correction uses Taylor expansions of the solution and its gradient along the discrete normal, with the exact normal used to evaluate the transported flux. At an interface, a further correction to the normal flux jump accounts for the difference between these two normals. Under the stated trace and Poincaré bounds, the corrected form is an $O(h^{1/2})$ perturbation of a symmetric form, whose matrix can therefore be used as a preconditioner. For a fixed finite Robin coefficient, we obtain the energy error bound $C_β(h^p+δ_h^{m+1})$, whereas the bound uniform in the Robin coefficient is $C(h^p+h^{-1/2}δ_h^{m+1})$, provided the Poincaré constant is uniform. With $δ_h=O(h^2)$, the sufficient Taylor orders are therefore $2m+2\ge p$ and $2m+\frac32\ge p$, respectively. Numerical examples for $p=1,2,3$ illustrate these rates and the effect of the flux-jump correction in the interface problem.

math.NA↗

One-Sided $p$-Explicit Stability for High-Order Cut Finite Element Nitsche Methods

We give a one-sided stability argument for high-order cut finite elements with symmetric Nitsche boundary conditions. On each boundary patch, an $H^1$-projection splits the discrete function into a single polynomial and a stabilized residual. Inward segments control the polynomial inside the physical domain; complete-element estimates control only the residual. For smooth exterior boundaries and under a geometry-dependent mesh restriction, this gives an explicit normal-flux estimate with factor $p^2/h$ and a sufficient Nitsche penalty with the same scaling. The constants are independent of the cut position and polynomial degree. A neighboring-interval estimate quantifies the exponential cost of polynomial continuation and motivates avoiding it in the stability proof. We obtain $hp$-error estimates, with half a power of degree lost in energy and a full power in $L^2$ relative to best approximation, and exponential degree convergence for analytic extensions on sufficiently fine meshes. Translated-disk experiments show bounded normalized flux constants and penalty thresholds over the tested degrees and cuts, and resolved convergence curves follow the predicted orders. Physical and extension-dependent stabilization errors are reported separately.

math.NA↗

Boundary Value Correction for the Boundary Element Method

We develop a boundary element method for the Laplace equation with Dirichlet boundary conditions in a bounded three-dimensional domain. The method uses flat panels of maximum diameter \(h\) on an interior surrogate boundary and corrects the imposed boundary values by a first-order Taylor expansion along the panel normals. The correction uses the normal flux already present in the Calderón formulation and introduces no additional unknown field. Under uniform assumptions on the surrogate geometry and boundary operators, the penalised form is coercive when \(γδ_h\le c_0<4\), where \(γ\) is the penalty parameter and \(δ_h\) is the maximum normal offset. The error estimate separates trace approximation from a geometry term of size \(γ^{1/2}δ_h^2\|u\|_{H^3(Ω)}\). With \(γ\simeq h^{-1}\), the sufficient condition \(δ_h\lesssim h^{(k+1)/2}\) yields an error of order \(h^{k+1/2}\) for \(P_k/P_{k-1}\) Dirichlet/flux spaces under the stated regularity and uniform trace bounds. Thus an offset of order \(h^2\) supports the estimate through cubic Dirichlet approximation. We analyse two penalty variants and present numerical experiments on a sphere and an ellipsoid to examine convergence and sensitivity to geometry, penalty scaling and quadrature.

math.NA↗

Structure-Preserving Augmented Lagrangian Finite Element Methods for Cavitation in Reynolds and Stokes Flows

In this paper we propose augmented Lagrangian finite element methods for cavitation in the Reynolds and Stokes models of lubrication, for which the discrete complementarity conditions hold exactly and the augmentation parameter drops out of the method. For the Reynolds equation this follows from nodal quadrature in a mixed piecewise linear method, for which we prove the classical first-order error estimate. We also determine the computable stability threshold of a multiplier-free stabilised alternative. For Stokes flow we show that the constrained scalar is the mechanical pressure when the deviatoric stress, with zero bulk viscosity, is used, but not with the customary incompressible stress. We discretise with a jump-stabilised Crouzeix-Raviart element and piecewise constant pressure, and prove well-posedness, stability in two and three dimensions, and a first-order error estimate. We present numerical examples which verify these properties and show that close pressure profiles in the two models do not imply close cavity predictions, the latter also being sensitive to the end conditions of the computational domain.

math.NA↗

Normal Equations and Discrete Energy Structures for High-Order Streamline Diffusion

We analyse fully discrete Streamline Diffusion finite element methods, also known as SUPG methods, for time-dependent first-order systems with skew-symmetric spatial operators. To the best of our knowledge, this is the first stability and a priori error analysis of strongly consistent Streamline Diffusion finite elements combined with linear multistep schemes of order greater than two for multidimensional first-order hyperbolic systems. Local-in-time $L^2$-residual minimisation singles out $δ=b_0τ$, where $δ$ is the stabilisation parameter, $τ$ the time step, and $b_0$ the current-time coefficient in the method average. For this choice, each implicit linear system is a symmetric positive definite normal equation in a graph norm. A direct dual-residual estimate yields errors of order $O(h^{k+1/2}+τ^ν)$ when $δ$ is proportional to $h$ and $τ=O(h)$, where $h$ is the mesh size, $k$ the polynomial degree, and $ν$ the temporal order. Stability is established for the $θ$-method and the Adams-Moulton methods AM3-AM5. The general-degree AM3 and AM4 estimates use strengthened CFL conditions; for continuous piecewise affine elements, an elementwise cancellation recovers the standard hyperbolic regime. AM5 and the explicit Adams-Bashforth methods AB3 and AB4 are stable under a standard hyperbolic CFL condition, though the explicit schemes do not have normal-equation structure. Order-matched acoustic tests recover orders two through five and material-residual rates one half-order lower. In a d'Alembert test with discontinuous initial data, normal-equation SUPG recovers second-order local $\mathbb P_1$ convergence away from the wave fronts, whereas the unstabilised error is close to half order. A two-dimensional compact-wave test shows improved localisation with modest dissipation.

math.NA↗

Cut Finite Element Methods for Convection-Diffusion in Mixed-Dimensional Domains

We develop a cut finite element method (CutFEM) for convection--diffusion problems posed on mixed-dimensional domains, i.e., unions of manifolds of different dimensions arranged in a hierarchical structure where lower-dimensional components form parts of the boundaries of higher-dimensional ones. Such domains arise, for instance, in the modeling of fractured porous media with intersecting fractures. The model problem is formulated in a compact abstract form using mixed-dimensional directional derivative and divergence operators, which allows the problem to be expressed in a way that closely resembles the classical convection--diffusion equation. The proposed CutFEM is based on a fixed background mesh that does not conform to the geometry, with each manifold component represented through its associated active mesh. The method employs continuous piecewise linear elements together with weak enforcement of coupling conditions and suitable stabilization. We prove a priori energy norm error estimates under a global uniform-diffusion assumption, with corresponding extensions to solutions of reduced regularity $u\in H^s$, $1\le s<2$, and derive conditional estimates for the globally pure-convection case. Partially degenerate configurations, in which diffusion is present only on selected components, are explored numerically. The experiments report convergence in both the energy and $L^2$-norms and illustrate the performance of the method.

math.NA↗

A Barrier-Regularized Symmetric Nitsche Method for the Signorini Problem

We introduce and analyze a barrier-regularized symmetric Nitsche method for the scalar Signorini problem. Applying a logarithmic barrier to the nonnegative slack variable in an augmented Lagrangian and then eliminating that variable yields a smooth positive-part operator and the perturbed complementarity relation on a primal-dual central path, with barrier parameter $μ=γs$. For every $s>0$, the discrete problem is continuously differentiable, uniquely solvable, and has a symmetric positive definite Newton matrix when the Nitsche parameter is sufficiently large. Under a mild barrier-feasibility condition, the continuous logarithmic energy has a unique minimizer $u_μ$ for every $μ>0$, its gap is positive almost everywhere, and $\|u-u_μ\|_{H^1(Ω)}\lesssimμ^{1/2}$. Under the Sobolev regularity used for finite element approximation, this minimizer satisfies the \(L^2\) central-path boundary law. If the obstacle is locally the trace of an $H^2$-function, we also prove a uniform local $H^2$ bound in the interior of each planar contact face, on neighborhoods that may contain a free-boundary point of the limiting Signorini solution. The method is exactly consistent and quasi-optimal relative to $u_μ$, with constants independent of $s$. If $u_μ$ is uniformly bounded in $H^r(Ω)$, $3/2<r\leq k+1$, then $\|u-u_h\|_{H^1(Ω)}\lesssim h^{r-1}\|u_μ\|_{H^r(Ω)}+μ^{1/2}$; hence the sufficient balance $s\lesssim h^{2r-1}$ preserves the available energy-norm rate. We also derive rates for discrete penetration and the complementarity residual. Numerical experiments with $P_1$ and $P_2$ elements on structured and unstructured meshes support the predicted rates and the local Newton theory, while showing that a rate-preserving smoothing may still resolve the contact set poorly.

math.NA↗

Nonconforming $hp$-FE/BE coupling on unstructured meshes based on Nitsche's method

We construct and analyse a $hp$-FE/BE coupling on non-matching meshes, based on Nitsche's method. Both the mesh size and the polynomial degree are changed to improve accuracy. Nitsche's method leads to a positive definite formulation, thus, unlike the mortar method, it does not require the Babuška-Brezzi condition for stability. The method is stable provided the stabilization function is larger than a certain threshold. We obtain an explicit bound for the threshold and derive a priori error estimates. Our analysis can be easily extended to the pure FE or the pure BE decomposition as well as to the case of more than two subdomains. The problem in a bounded domain is considered in detail, but the case of an unbounded BE subdomain and a bounded FE subdomain follows with similar arguments. We develop convergence analysis and provide numerical examples for quasi-uniform as well as geometrically refined $hp$ discretisations in both subdomains with analytic and singular solutions.

math.NA↗

Hybridized Augmented Lagrangian Methods for Contact Problems

This paper addresses the problem of friction-free contact between two elastic bodies. We develop an augmented Lagrangian method that provides computational convenience by reformulating the contact problem as a nonlinear variational equality. To achieve this, we propose a Nitsche-based method incorporating a hybrid displacement variable defined on an interstitial layer. This approach enables complete decoupling of the contact domains, with interaction occurring exclusively through the interstitial layer. The layer is independently approximated, eliminating the need to handle intersections between unrelated meshes. Additionally, the method supports introducing an independent model on the interface, which we leverage to represent a membrane covering one of the bodies. We present the formulation of the method, establish stability and error estimates, and demonstrate its practical utility through illustrative numerical examples.

math.NA↗

A divergence preserving cut finite element method for Darcy flow

We study cut finite element discretizations of a Darcy interface problem based on the mixed finite element pairs $\textbf{RT}_k\times Q_k$, $k\geq 0$. Here $Q_k$ is the space of discontinuous polynomial functions of degree less or equal to $k$ and $\textbf{RT}$ is the Raviart-Thomas space. We show that the standard ghost penalty stabilization, often added in the weak forms of cut finite element methods for stability and control of the condition number of the linear system matrix, destroys the divergence-free property of the considered element pairs. Therefore, we propose new stabilization terms for the pressure and show that we recover the optimal approximation of the divergence without losing control of the condition number of the linear system matrix. We prove that the method with the new stabilization term has pointwise divergence-free approximations of solenoidal velocity fields. We derive a priori error estimates for the proposed unfitted finite element discretization based on $\textbf{RT}_k\times Q_k$, $k\geq 0$. In addition, by decomposing the mesh into macro-elements and applying ghost penalty terms only on interior edges of macro-elements, stabilization is applied very restrictively and only where needed. Numerical experiments with element pairs $\textbf{RT}_0\times Q_0$, $\textbf{RT}_1\times Q_1$, and $\textbf{BDM}_1\times Q_0$ (where $\textbf{BDM}$ is the Brezzi-Douglas-Marini space) indicate that we have 1) optimal rates of convergence of the approximate velocity and pressure; 2) well-posed linear systems where the condition number of the system matrix scales as it does for fitted finite element discretizations; 3) optimal rates of convergence of the approximate divergence with pointwise divergence-free approximations of solenoidal velocity fields. All three properties hold independently of how the interface is positioned relative to the computational mesh.

math.NA↗

Cut finite element method for divergence free approximation of incompressible flow: a Lagrange multiplier approach

In this note we design a cut finite element method for a low order divergence free element applied to a boundary value problem subject to Stokes' equations. For the imposition of Dirichlet boundary conditions we consider either Nitsche's method or a stabilized Lagrange multiplier method. In both cases the normal component of the velocity is constrained using a multiplier, different from the standard pressure approximation. The divergence of the approximate velocities is pointwise zero over the whole mesh domain, and we derive optimal error estimates for the velocity and pressures, where the error constant is independent of how the physical domain intersects the computational mesh, and of the regularity of the pressure multiplier imposing the divergence free condition.

math.NA↗

The augmented Lagrangian method as a framework for stabilised methods in computational mechanics

In this paper we will review recent advances in the application of the augmented Lagrange multiplier method as a general approach for generating multiplier--free stabilised methods. We first show how the method generates Galerkin/Least Squares type schemes for equality constraints and then how it can be extended to develop new stabilised methods for inequality constraints. Application to several different problems in computational mechanics is given.

math.NA↗

Extension Operators for Trimmed Spline Spaces

We develop a discrete extension operator for trimmed spline spaces consisting of piecewise polynomial functions of degree $p$ with $k$ continuous derivatives. The construction is based on polynomial extension from neighboring elements together with projection back into the spline space. We prove stability and approximation results for the extension operator. Finally, we illustrate how we can use the extension operator to construct a stable cut isogeometric method for an elliptic model problem.

math.NA↗

A simple nonconforming tetrahedral element for the Stokes equations

In this paper we apply a nonconforming rotated bilinear tetrahedral element to the Stokes problem in $\mathbb{R}^3$. We show that the element is stable in combination with a piecewise linear, continuous, approximation of the pressure. This gives an approximation similar to the well known continuous $P^2-P^1$ Taylor$-$Hood element, but with fewer degrees of freedom. The element is a stable non-conforming low order element which fulfils Korn's inequality, leading to stability also in the case where the Stokes equations are written on stress form for use in the case of free surface flow.

math.NA↗

On the Design of Locking Free Ghost Penalty Stabilization and the Relation to CutFEM with Discrete Extension

In this note, we develop a new stabilization mechanism for cut finite element methods that generalizes previous approaches of ghost penalty type in two ways: (1) The quantity that is stabilized and (2) The choice of elements that are connected in the stabilization. In particular, we can stabilize functionals of the discrete function such as finite element degrees of freedom. We subsequently show that the kernel of our ghost penalty operator defines a finite element space based on discrete extensions in the spirit of those introduced in Burman, E.; Hansbo, P. and Larson, M. G., CutFEM Based on Extended Finite Element Spaces, arXiv2101.10052, 2021.

math.NA↗

Augmented Lagrangian approach to deriving discontinuous Galerkin methods for nonlinear elasticity problems

We use the augmented Lagrangian formalism to derive discontinuous Galerkin formulations for problems in nonlinear elasticity. In elasticity stress is typically a symmetric function of strain, leading to symmetric tangent stiffness matrices in Newtons method when conforming finite elements are used for discretization. By use of the augmented Lagrangian framework, we can also obtain symmetric tangent stiffness matrices in discontinuous Galerkin methods. We suggest two different approaches and give examples from plasticity and from large deformation hyperelasticity.

cs.CE↗

Nitsche's Finite Element Method for Model Coupling in Elasticity

We develop a Nitsche finite element method for a model of Euler--Bernoulli beams with axial stiffness embedded in a two--dimensional elastic bulk domain. The beams have their own displacement fields, and the elastic subdomains created by the beam network are triangulated independently and are coupled to the beams weakly by use of Nitsche's method in the framework of hybridization.

math.NA↗

Error estimates for the Smagorinsky turbulence model: enhanced stability through scale separation and numerical stabilization

In the present work we show some results on the effect of the Smagorinsky model on the stability of the associated perturbation equation. We show that in the presence of a spectral gap, such that the flow can be decomposed in a large scale with moderate gradient and a small amplitude fine scale with arbitratry gradient, the Smagorinsky model admits stability estimates for perturbations, with exponential growth depending only on the large scale gradient. We then show in the context of stabilized finite element methods that the same result carries over to the approximation and that in this context, for suitably chosen finite element spaces the Smagorinsky model acts as a stabilizer yielding close to optimal error estimates in the $L^2$-norm for smooth flows in the pre-asymptotic high Reynolds number regime.

math.NA↗