arXiv subjects

Peter J. Pauzauskie

Publications and source records attributed to Peter J. Pauzauskie.

14 recordsLinked to original sources

arXiv2026

An Optomechanical Coin Flip: Wavelength-Modulated, Erbium-Powered Rotations in a Levitated System

Optical levitation of nano-scale systems offers a pathway to highly sensitive rotation measurements, which are critical for advancing gyroscopic technologies. While prior studies have primarily focused on controlling rotational degrees of freedom of optically levitated particles via modulation of optical power, polarization, and ambient pressure, here we demonstrate wavelength-controlled rotation of the "coin-flip" mode in optically levitated NaYF hexagonal prisms doped with erbium by modulating the wavelength of a secondary pump beam. By switching the pump light wavelength, we precisely modulate the particle's rotation rate in a binary fashion, encoding the ASCII message "hello" in its rotational frequency. Finally, we observe long-term bimodal periodic dynamics in the rotational motion of a levitated prism that are suggestive of a Dzhanibekov (or tennis-racket)-like effect.

physics.optics↗

arXiv2025

Solid-state Laser Cooling

Since the first proof-of-concept demonstrations of photoluminescence-based optical refrigeration, solid-state laser cooling has developed into a credible competitor to conventional cryogenic technologies. Solid-state laser cooling continues to advance as new materials push cooling limits. These developments have created a need to consolidate progress made to date as well as standardize critical experimental considerations needed for reliable and verifiable cooling measurements. This primer therefore outlines essential concepts and requirements, which underpin solid-state laser cooling. The primer summarizes key milestones achieved with cooling-grade, rare-earth-doped glasses and crystals as well as with semiconductors. It additionally highlights emerging applications of solid-state optical refrigeration. To strengthen the consistency and reproducibility of cooling results going forward, two reporting checklists are introduced. They cover materials, cooling metrics, and thermometry. This primer is intended to serve as both a tutorial and a practical reference for incoming and existing researchers involved in solid-state laser-cooling.

physics.optics↗

arXiv2025

Hydrothermal Synthesis of Ultra-high Aspect Ratio $β$-NaYF Disks via Methyliminodiacetic Acid (MIDA)

The hexagonal $β$-phase of sodium yttrium fluoride (NaYF) is a leading host material for lanthanide upconversion and anti-Stokes fluorescence laser refrigeration based on its low phonon energies and high upconversion efficiency. Recently experiments have been proposed to use this material as an optically-levitated sensor of high-frequency gravitational waves. In order to maximize signal-to-noise in this experiment, the NaYF sensor must have both a two-dimensional, disk-like morphology and also a large mass. Here we report a novel hydrothermal process based on the chelation ligand methylimidodiacetic acid (MIDA) to realize hexagonal $β$-NaYF prisms with corner-to-corner diameters up to 44 $\mathrm{μm}$ while keeping the height around 1 $\mathrm{μm}$. The surface quality is comparable to particles synthesized with EDTA based on atomic force microscopy (AFM) measurements. Unlike particles synthesized with EDTA the $β$-NaYF particles show no lensing based on curvature of the hexagonal basal plane. Single crystal X-ray diffraction data were refined to the P-62c (#190) space group which to the best of our knowledge has not been reported in the literature. One of six 44 $\mathrm{μm}$ $β$-NaYF disks doped with 10% ytterbium showed laser refrigeration of ($-4.9 \pm 1.0$) K suggesting future applications in both levitated optomechanics and microoptics.

cond-mat.mtrl-sci↗

arXiv2024

Optomechanics of optically-levitated particles: A tutorial and perspective

Optomechanics, the study of the mechanical interaction of light with matter, has proven to be a fruitful area of research that has yielded many notable achievements, including the direct detection of gravitational waves in kilometer-scale optical interferometers. Light has been used to cool and demonstrate quantum control over the mechanical degrees of freedom of individual ions and atoms, and more recently has facilitated the observation of quantum ``mechanics'' in objects of larger mass, even at the kg-scale. Optical levitation, where an object can be suspended by radiation pressure and largely decoupled from its environment, has recently established itself as a rich field of study, with many notable results relevant for precision measurement, quantum information science, and foundational tests of quantum mechanics and fundamental physics. This article provides a survey of several current activities in field along with a tutorial describing associated key concepts and methods, both from an experimental and theoretical approach. It is intended as a resource for junior researchers who are new to this growing field as well as beginning graduate students. The tutorial is concluded with a perspective on both promising emerging experimental platforms and anticipated future theoretical developments.

quant-ph↗

arXiv2024

Experimental minimum of condensed-phase optical refrigeration

Since the first demonstration of optical refrigeration in a rare-earth-doped glass nearly 30 years ago, the nascent field of laser cooling solids has progressed significantly. It is now possible to demonstrate payload cooling to ~91 K using laser-excited ytterbium-doped fluoride crystals. Realizing lower temperatures, however, requires achieving ultrahigh purities in existing rare earth-doped crystals or establishing new cooling media. For the latter, semiconductors are an obvious choice given higher cooling power densities and predicted cooling floors as low as 10 K. This has stimulated a race to demonstrate the optical refrigeration of a semiconductor. It is therefore timely to systematize the necessary and sufficient experimental minimum criteria for reporting optical refrigeration results to elevate the reliability and reproducibility of current and future optical refrigeration claims. We distill an optical refrigeration Experimental Minimum (EM) that we propose will standardize the reporting of new cooling results. EM tenets fall into the following categories: demonstrations of explicit heating vs cooling, optical cooling metrics, thermodynamic consistency, and reliable temperature measurements. All optical refrigeration claims should demonstrate the above four criteria to ensure their reliability and verifiability. We further propose that the EM serve as a guide for reviewing literature claims in the field.

physics.optics↗

arXiv2023

Optical assembly of nanostructures mediated by surface roughness

Rigorous understanding of the self-assembly of colloidal nanocrystals is crucial to the development of tailored nanostructured materials. Despite extensive studies, a mechanistic understanding of self-assembly under non-equilibrium driven by an external field remains an ongoing challenge. We demonstrate self-assembly by optical tweezers imposing an external attractive field for cubic-phase sodium yttrium fluoride nanocrystals. We show that surface roughness of the nanocrystals is a decisive factor for contact leading to assembly between the nanocrystals, manifested by the roughness-dependent hydrodynamic resistivity. This provides direct evidence that dynamics are equally important to energetics in understanding self-assembly. These results have implications in a wide variety of different fields, such as in understanding the factors that mediate oriented attachment-based crystal growth or in interpreting the structure of binding sites on viruses.

cond-mat.mtrl-sci↗

arXiv2022

Optical trapping of high-aspect-ratio NaYF hexagonal prisms for kHz-MHz gravitational wave detectors

We present experimental results on optical trapping of Yb-doped $β-$NaYF sub-wavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, oriented with the normal vector to their face along the beam propagation direction, and exhibit characteristic modes of three translational and two torsional degrees of freedom. The measured motional spectra are compared with numerical simulations. This plate-like geometry simultaneously enables trapping with low photon-recoil-heating, high mass, and high trap frequency, potentially leading to advances in high frequency gravitational wave searches in the Levitated Sensor Detector (LSD), currently under construction. The material used here has previously been shown to exhibit internal cooling via laser refrigeration when optically trapped and illuminated with light of suitable wavelength. Employing such laser refrigeration methods in the context of our work may enable higher trapping intensity thus and higher trap frequencies for gravitational wave searches approaching the several hundred kHz range.

physics.optics↗

arXiv2020

Solid-state laser refrigeration of nanodiamond quantum sensors

The negatively-charged nitrogen vacancy (NV$^-$) centre in diamond is a remarkable optical quantum sensor for a range of applications including, nanoscale thermometry, magnetometry, single photon generation, quantum computing, and communication. However, to date the performance of these techniques using NV$^-$ centres has been limited by the thermally-induced spectral wandering of NV$^-$ centre photoluminescence due to detrimental photothermal heating. Here we demonstrate that solid-state laser refrigeration can be used to enable rapid (ms) optical temperature control of nitrogen vacancy doped nanodiamond (NV$^-$:ND) quantum sensors in both atmospheric and \textit{in vacuo} conditions. Nanodiamonds are attached to ceramic microcrystals including 10\% ytterbium doped yttrium lithium fluoride (Yb:LiYF$_4$) and sodium yttrium fluoride (Yb:NaYF$_4$) by van der Waals bonding. The fluoride crystals were cooled through the efficient emission of upconverted infrared photons excited by a focused 1020 nm laser beam. Heat transfer to the ceramic microcrystals cooled the adjacent NV$^-$:NDs by 10 and 27 K at atmospheric pressure and $\sim$10$^{-3}$ Torr, respectively. The temperature of the NV$^-$:NDs was measured using both Debye-Waller factor (DWF) thermometry and optically detected magnetic resonance (ODMR), which agree with the temperature of the laser cooled ceramic microcrystal. Stabilization of thermally-induced spectral wandering of the NV$^{-}$ zero-phonon-line (ZPL) is achieved by modulating the 1020 nm laser irradiance. The demonstrated cooling of NV$^-$:NDs using an optically cooled microcrystal opens up new possibilities for rapid feedback-controlled cooling of a wide range of nanoscale quantum materials.

cond-mat.mtrl-sci↗

arXiv2020

Laser-Driven Growth of Semiconductor Nanowires from Colloidal Nanocrystals via the Young-Laplace Effect

The ability to produce nanowires through vapor- and solution-based processes has propelled nanowire material systems toward a wide range of technological applications. Conventional, vapor-based nanowire syntheses have enabled precise control over nanowire composition and phase. However, vapor-based nanowire growth employs batch processes with specialized pressure management systems designed to operate at high temperatures, limiting throughput. More recently developed solution-based nanowire growth processes have improved scalability but can require even more extensive pressure and temperature management systems. Here, we demonstrate a continuous-flow, solution-based nanowire growth process that utilizes the large Young-Laplace interfacial surface pressures and collective heating effects of colloidal metal nanocrystals under irradiation to drive semiconductor nanowire growth photothermally without the need for high-pressure or high-temperature equipment. In this process, a laser irradiates a solution containing metal nanocrystals and semiconductor precursors. Upon light absorption, the metal nanocrystals heat rapidly, inducing semiconductor precursor decomposition and nanowire growth. This process is performed on a benchtop in simple glassware under standard conditions. To demonstrate the generality of this technique, we synthesized three distinct semiconductor nanowire material systems: bismuth-seeded germanium nanowires, bismuth-seeded cadmium selenide nanowires, and indium-seeded germanium nanowires. The simplicity and versatility of this process opens the door to a range of experiments and technologies including in-line combinatorial identification of optimized reaction parameters, in situ spectroscopic measurements to study solution-based nanowire growth, and the potential production of nanowires with complex compositions or rationally incorporated dopants.

physics.app-ph↗

arXiv2019

Solid-state laser refrigeration of a semiconductor optomechanical resonator

Photothermal heating represents a major constraint that limits the performance of many nanoscale optoelectronic and optomechanical devices including nanolasers, quantum optomechanical resonators, and integrated photonic circuits. Although radiation-pressure damping has been reported to cool an individual vibrational mode of an optomechanical resonator to its quantum ground state, to date the internal material temperature within an optomechanical resonator has not been reported to cool via laser excitation. Here we demonstrate the direct laser refrigeration of a semiconductor optomechanical resonator >20K below room temperature based on the emission of upconverted, anti-Stokes photoluminescence of trivalent ytterbium ions doped within a yttrium-lithium-fluoride (YLF) host crystal. Optically-refrigerating the lattice of a dielectric resonator has the potential to impact several fields including scanning probe microscopy, the sensing of weak forces, the measurement of atomic masses, and the development of radiation-balanced solid-state lasers. In addition, optically refrigerated resonators may be used in the future as a promising starting point to perform motional cooling for exploration of quantum effects at mesoscopic length scales,temperature control within integrated photonic devices, and solid-state laser refrigeration of quantum materials

physics.app-ph↗

arXiv2018

High pressure, high temperature molecular doping of nanodiamond

The development of color centers in diamond as the basis for emerging quantum technologies has been limited by the need for ion implantation to create the appropriate defects. We present a versatile method to dope diamond without ion implantation, by synthesis of a doped amorphous carbon precursor and transformation at high temperatures and high pressures. To explore this bottom-up method for color center generation, we rationally create silicon-vacancy defects in nanodiamond and investigate them for optical pressure metrology. In addition, we show that this process can generate noble gas defects within diamond from the typically-inactive argon pressure medium, which may explain the hysteresis effects observed in other high pressure experiments and the presence of noble gases in some meteoritic nanodiamonds. Our results illustrate a general method to produce color centers in diamond, and may enable the controlled generation of designer defects.

cond-mat.mtrl-sci↗

arXiv2017

Photothermal effects during nanodiamond synthesis from a carbon aerogel in a laser-heated diamond anvil cell

Nanodiamonds have emerged as promising materials for quantum computing, biolabeling, and sensing due to their ability to host color centers with remarkable photostability and long spin-coherence times at room temperature. Recently, a bottom-up, high-pressure, high-temperature (HPHT) approach was demonstrated for growing nanodiamonds with color centers from amorphous carbon precursors in a laser-heated diamond anvil cell (LH-DAC) that was supported by a near-hydrostatic noble gas pressure medium. However, a detailed understanding of the photothermal heating and its effect on diamond growth, including the phase conversion conditions and the temperature-dependence of color center formation, has not been reported. In this work, we measure blackbody radiation during LH-DAC synthesis of nanodiamond from carbon aerogel to examine these temperature-dependent effects. Blackbody temperature measurements suggest that nanodiamond growth can occur at 16.3 GPa and 1800 K. We use Mie theory and analytical heat transport to develop a predictive photothermal heating model. This model demonstrates that melting the noble gas pressure medium during laser heating decreases the local thermal conductivity to drive a high spatial resolution of phase conversion to diamond. Finally, we observe a temperature-dependent formation of nitrogen vacancy centers and interpret this phenomenon in the context of HPHT carbon vacancy diffusion using CBΩ theory.

cond-mat.mtrl-sci↗

arXiv2016

Recovery of Si-IV nanowires from extreme GPa pressure

We use Raman spectroscopy in tandem with transmission electron microscopy and DFT simulations to show that extreme (GPa) pressure converts the phase of silicon nanowires from cubic (Si-I) to hexagonal (Si-IV) while preserving the nanowire's cylindrical morphology. In situ Raman scattering of the TO mode demonstrates the high-pressure Si-I to Si-II phase transition near 9 GPa. Raman signal of the TO phonon shows a decrease in intensity in the range 9 to 14 GPa. Then, at 17 GPa, it is no longer detectable, indicating a second phase change (Si-II to Si-V) in the 14 to 17 GPa range. Recovery of exotic phases in individual silicon nanowires from diamond anvil cell experiments reaching 17 GPa is also shown. Raman measurements indicate Si-IV as the dominant phase in pressurized nanowires after decompression. Transmission electron microscopy and electron diffraction confirm crystalline Si-IV domains in individual nanowires. Computational electromagnetic simulations suggest that heating from the Raman laser probe is negligible and that near-hydrostatic pressure is the primary driving force for the formation of hexagonal silicon nanowires.

cond-mat.mtrl-sci↗

arXiv2015

Cold Brownian motion in aqueous media via anti-Stokes photoluminescence

Advances in cryogenic sciences have enabled several observations of new low-temperature physical phenomena including superconductivity, superfluidity, and Bose-Einstein condensates. Heat transfer is also critical in numerous applications including thermal management within integrated microelectronics and the regulation of plant-growth and development. Here we demonstrate that single-beam laser-trapping can be used to induce and quantify the local refrigeration of aqueous media through analysis of the cold Brownian dynamics of individual Yb3+-doped yttrium lithium fluoride (YLF) crystals in an inhomogeneous temperature field via forward light scattering and back-focal-plane interferometry. A tunable, NIR continuous-wave laser is used to optically trap individual YLF crystals with an irradiance on the order of 1 MW/cm2. Heat is transported out of the crystal lattice (across the solid / liquid interface) by anti-Stokes photoluminescence following upconversion of Yb3+ excited states mediated by optical-phonon absorption. The cold Brownian motion (CBM) analysis of individual YLF crystals indicates local cooling by >21 C below ambient conditions suggesting a range of potential future applications.

cond-mat.mes-hall↗