arXiv subjects

Peter Jakes

Publications and source records attributed to Peter Jakes.

5 recordsLinked to original sources

arXiv2026

Multi-Method Li Plating Characterization of a Commercial 26 Ah Li-Ion Pouch-Cell

Lithium (Li) plating on graphite is a significant degradation mechanism in Li-ion batteries. While numerous experimental techniques have been used to study Li plating in laboratory cells, investigations of commercial high-energy cells often rely on electrochemical methods. Here we present and classify various methods for detecting Li plating on a commercial A123 pouch cell. In a round robin study across multiple battery research laboratories, Li-plated graphitic electrode material was analyzed using electrochemical, microscopic, and spectroscopic methods capable of detecting metallic Li deposits. After cell opening, their overall distribution on the anode surface was examined using a flatbed scanner to ensure comparability of the samples. Optical and electron microscopy provided detailed surface and, in combination with a focused ion beam, subsurface structure and morphology. Spectroscopic methods confirmed the presence and onset of plated Li with varying sensitivity. Moreover, spectroscopic and imaging techniques were combined correlatively where possible. Availability and measurement duration of each technique was compared. Optical methods are fast and easy to use; thus, they are recommended for most samples, with spectroscopic confirmation reserved for reference samples. This multimodal study demonstrates a range of methods that can be used alone or in combination to qualitatively or quantitatively detect Li-plating.

cond-mat.mtrl-sci↗

arXiv2024

The Origin of Enhanced Conductivity and Structure Change in Defective Li4Ti5O12 or Blue-LTO : a study combined theoretical and experimental perspectives

The spinel Li4Ti5O12 (LTO) has emerged as a promising anode material for the next generation of all-solid-state Li-ion batteries (ASSB), primarily due to its characteristic "zero strain" charge/discharge behavior and exceptional cycling stability, which significantly prolongs battery lifespan. Pristine LTO, however, is hindered by poor ionic and electronic conductivity. By employing tailored sintering protocols that create oxygen vacancies, a high-performing, blue LTO material is achieved. It has been proposed that the increased electronic conductivity could stem from vacancy-induced polarons. Yet, detailed insights into polaron stability, distribution, and dynamics within both the LTO bulk and surface have remained elusive due to limited information on structural changes. Utilizing Positron Annihilation Lifetime Spectroscopy (PALS) and Coincidence Doppler Broadening Spectroscopy (CDBS), in conjunction with Two Component Density Functional Theory (TCDFT) with the on-site Hubbard U correction, enables us to probe the depth profile of defect species introduced by sintering in a reductive environment. Our research provides direct evidence of oxygen vacancy formation within the subsurface region, an inference drawn from the observation of \ch{Ti^{3+}}. Our investigation into Li16d vacancy formation within the bulk region uncovers the interactions between mobile species, namely Li-ions and polarons. Furthermore, we delve into the polaron stability on the LTO surface, offering an explanation for the superior performance of the (100) facet exposed LTO nanoparticle, as compared to its (111) exposed counterpart.

cond-mat.mtrl-sci↗

arXiv2021

Revisiting the storage capacity limit of graphite battery anodes: spontaneous lithium overintercalation at ambient pressure

The market quest for fast-charging, safe, long-lasting and performant batteries drives the exploration of new energy storage materials, but also promotes fundamental investigations of materials already widely used. Presently, revamped interest in anode materials is observed -- primarily graphite electrodes for lithium-ion batteries. Here, we focus on the upper limit of lithium intercalation in the morphologically quasi-ideal highly oriented pyrolytic graphite (HOPG), with a LiC$_6$ stoichiometry corresponding to 100\% state of charge (SOC). We prepared a sample by immersion in liquid lithium at ambient pressure and investigated it by static $^7$Li nuclear magnetic resonance (NMR). We resolved unexpected signatures of superdense intercalation compounds, LiC$_{6-x}$. These have been ruled out for decades, since the highest geometrically accessible composition, LiC$_2$, can only be prepared under high pressure. We thus challenge the widespread notion that any additional intercalation beyond LiC$_6$ is not possible under ambient conditions. We monitored the sample upon calendaric aging and employed ab initio calculations to rationalise the NMR results. The computed relative stabilities of different superdense configurations reveal that non-negligible overintercalation does proceed spontaneously beyond the currently accepted capacity limit.

cond-mat.mtrl-sci↗

arXiv2018

EPR Imaging of Metallic Lithium

We present a sensitive characterization method to image the microstructure of lithium deposits in lithium-ion battery components by Conduction Electron Paramagnetic Resonance Imaging (CEPRI). The versatility of the method is demonstrated for both, imaging surface-patterns of thick lithium metal anodes, as well as obtaining high-resolution images of lithium dendrites formed inside a separator with several micrometre pixel size. The determined spatial distribution of dendrites may then serve as an indicator of the current density distribution and, therefore, yields most valuable information for battery cell design. Accordingly, this method shows its capabilities in a research area where electron paramagnetic resonance imaging (EPRI) has not been utilized so far.

physics.chem-ph↗

arXiv2017

Long-run in-operando NMR to investigate the evolution and degradation of battery cells

Nuclear magnetic resonance (NMR) investigations of electrochemical systems require gas-tight and non-metallic cell housings. This contribution reports on the development and evaluation of a cylindrical battery container in combination with a numerically optimized saddle coil that is suitable for NMR investigations of battery cells over hundreds of charge-discharge cycles. The reliability of the new cell container design and its long-time gas-tight sealing are shown by rate capability comparisons to standard housings with LiCoO$_{2}$ (LCO) vs. Li-metal electrodes as well as a charge-discharge experiment of a LCO vs. graphite batteries over more than 2000 hours. To demonstrate the performance of the entire NMR setup, long-run in-operando measurements on a Li-metal vs. graphite cell are presented. The NMR data reveal the formation and evolution of mossy and dendritic Li microstructures over a period of 1000 h. Analyzing the measured rate of microstructure growth could help to identify dendrite mitigation strategies, such as enhanced cell pressure or additives, and could enable a method for battery lifetime prediction.

physics.chem-ph↗