arXiv subjects

Peter Lodahl

Publications and source records attributed to Peter Lodahl.

At least 55 records · Page 3Linked to original sources

arXiv2022

A Pure and indistinguishable single-photon source at telecommunication wavelength

On-demand single-photon sources emitting pure and indistinguishable photons at the telecommunication wavelength are a critical asset towards the deployment of fiber-based quantum networks. Indeed, single photons may serve as flying qubits, allowing communication of quantum information over long distances. Self-assembled InAs quantum dots embedded in GaAs constitute an excellent nearly deterministic source of high quality single photons, but the vast majority of sources operate in the 900-950 nm wavelength range, precluding their adoption in a quantum network. Here, we present a quantum frequency conversion scheme for converting single photons from quantum dots to the telecommunication C band, around 1550 nm, achieving 40.8% end-to-end efficiency, while maintaining both high purity and a high degree of indistinguishability during conversion with measured values of $g^{(2)}(0)=2.4\%$ and $V^{\text{corr}}=94.8\%$, respectively.

quant-ph↗

arXiv2021

In-plane resonant excitation of quantum dots in a dual-mode photonic-crystal waveguide with high $β$-factor

A high-quality quantum dot (QD) single-photon source is a key resource for quantum information processing. Exciting a QD emitter resonantly can greatly suppress decoherence processes and lead to highly indistinguishable single-photon generation. It has, however, remained a challenge to implement strict resonant excitation in a stable and scalable way, without compromising any of the key specs of the source (efficiency, purity, and indistinguishability). In this work, we propose a novel dual-mode photonic-crystal waveguide that realizes direct in-plane resonant excitation of the embedded QDs. The device relies on a two-mode waveguide design, which allows exploiting one mode for excitation of the QD and the other mode for collecting the emitted single photons with high efficiency. By proper engineering of the photonic bandstructure, we propose a design with single-photon collection efficiency of $β> 0.95$ together with a single-photon impurity of $ε< 5 \times 10^{-3}$ over a broad spectral and spatial range. The device has a compact footprint of $\sim 50$ $μ$m$^2$ and would enable stable and scalable excitation of multiple emitters for multi-photon quantum applications.

quant-ph↗

arXiv2021

Chiral quantum optics in broken-symmetry and topological photonic crystal waveguides

On-chip chiral quantum light-matter interfaces, which support directional interactions, provide a promising platform for efficient spin-photon coupling, non-reciprocal photonic elements, and quantum logic architectures. We present full-wave three-dimensional calculations to quantify the performance of conventional and topological photonic crystal waveguides as chiral emitter-photon interfaces. Specifically, the ability of these structures to support and enhance directional interactions while suppressing subsequent backscattering losses is quantified. Broken symmetry waveguides, such as the non-topological glide-plane waveguide and topological bearded interface waveguide are found to act as efficient chiral interfaces, with the topological waveguide modes allowing for operation at significantly higher Purcell enhancement factors. Finally, although all structures suffer from backscattering losses due to fabrication imperfections, these are found to be smaller at high enhancement factors for the topological waveguide. These reduced losses occur because the optical mode is pushed away from the air-dielectric interfaces where scattering occurs, and not because of any topological protection. These results are important to the understanding of light-matter interactions in topological photonic crystals and to the design of efficient, on-chip chiral quantum devices.

physics.optics↗

arXiv2021

An integrated whispering-gallery-mode resonator for solid-state coherent quantum photonics

Tailored photonic cavities allow enhancing light-matter interaction ultimately to create a fully coherent quantum interface. Here, we report on an integrated microdisk cavity containing self-assembled quantum dots to coherently route photons between different access waveguides. We measure a Purcell factor of $F_{exp}=6.9\pm0.9$ for a cavity quality factor of about 10,000, allowing us to observe clear signatures of coherent scattering of photons by the quantum dots. We show how this integrated system can coherently re-route photons between the drop and bus ports, and how this routing is controlled by detuning the quantum dot and resonator, or through the strength of the excitation beam, where a critical photon number less than one photon per lifetime is required. We discuss the strengths and limitations of this approach, focusing on how the coherent scattering and single-photon nonlinearity can be used to increase the efficiency of quantum devices such as routers or Bell-state analyzers.

quant-ph↗

arXiv2021

Carrier-mediated optomechanical forces in semiconductor nanomembranes with coupled quantum wells

In the majority of optomechanical experiments, the interaction between light and mechanical motion is mediated by radiation pressure, which arises from momentum transfer of reflecting photons. This is an inherently weak interaction, and optically generated carriers in semiconductors have been predicted to be the mediator of different and potentially much stronger forces. Here we demonstrate optomechanical forces induced by electron-hole pairs in coupled quantum wells embedded into a free-free nanomembrane. We identify contributions from the deformation-potential and piezoelectric coupling and observe optically driven motion about three orders of magnitude larger than expected from radiation pressure. The amplitude and phase of the driven oscillations are controlled by an applied electric field, which tunes the carrier lifetime to match the mechanical period. Our work opens perspectives for not only enhancing the optomechanical interaction in a range of experiments, but also for interfacing mechanical objects with complex macroscopic quantum objects, such as excitonic condensates.

cond-mat.mes-hall↗

arXiv2021

Fidelity of time-bin entangled multi-photon states from a quantum emitter

We devise a mathematical framework for assessing the fidelity of multi-photon entangled states generated by a single solid-state quantum emitter, such as a quantum dot or a nitrogen-vacancy center. Within this formalism, we theoretically study the role of imperfections present in real systems on the generation of time-bin encoded Greenberger-Horne-Zeilinger and one-dimensional cluster states. We consider both fundamental limitations, such as the effect of phonon-induced dephasing, interaction with the nuclear spin bath, and second-order emissions, as well as technological imperfections, such as branching effects, non-perfect filtering, and photon losses. In a companion paper, we consider a particular physical implementation based on a quantum dot emitter embedded in a photonic crystal waveguide and apply our theoretical formalism to assess the fidelities achievable with current technologies.

quant-ph↗

arXiv2021

High-fidelity multi-photon-entangled cluster state with solid-state quantum emitters in photonic nanostructures

We propose a complete architecture for deterministic generation of entangled multiphoton states. Our approach utilizes periodic driving of a quantum-dot emitter and an efficient light-matter interface enabled by a photonic crystal waveguide. We assess the quality of the photonic states produced from a real system by including all intrinsic experimental imperfections. Importantly, the protocol is robust against the nuclear spin bath dynamics due to a naturally built-in refocussing method reminiscent to spin echo. We demonstrate the feasibility of producing Greenberger-Horne-Zeilinger and one-dimensional cluster states with fidelities and generation rates exceeding those achieved with conventional 'fusion' methods in current state-of-the-art experiments. The proposed hardware constitutes a scalable and resource-efficient approach towards implementation of measurement-based quantum communication and computing.

quant-ph↗

arXiv2021

Single-photon quantum hardware: towards scalable photonic quantum technology with a quantum advantage

The scaling up of quantum hardware is the fundamental challenge ahead in order to realize the disruptive potential of quantum technology in information science. Among the plethora of hardware platforms, photonics stands out by offering a modular approach, where the main challenge is to construct sufficiently high-quality building blocks and develop methods to efficiently interface them. Importantly, the subsequent scaling-up will make full use of the mature integrated photonic technology provided by photonic foundry infrastructure to produce small foot-print quantum processors of immense complexity. A fully coherent and deterministic photon-emitter interface is a key enabler of quantum photonics, and can today be realized with solid-state quantum emitters with specifications reaching the quantitative benchmark referred to as Quantum Advantage. This light-matter interaction primer realizes a range of quantum photonic resources and functionalities, including on-demand single-photon and multi-photon entanglement sources, and photon-photon nonlinear quantum gates. We will present the current state-of-the-art in single-photon quantum hardware and the main photonic building blocks required in order to scale up. Furthermore, we will point out specific promising applications of the hardware building blocks within quantum communication and photonic quantum computing, laying out the road ahead for quantum photonics applications that could offer a genuine quantum advantage.

quant-ph↗

arXiv2021

Electroabsorption in gated GaAs nanophotonic waveguides

We report on the analysis of electroabsorption in thin GaAs/Al$_{0.3}$Ga$_{0.7}$As nanophotonic waveguides with an embedded $p$-$i$-$n$ junction. By measuring the transmission through waveguides of different lengths, we derive the propagation loss as a function of electric field, wavelength, and temperature. The results are in good agreement with the Franz-Keldysh model of electroabsorption extending over 200 meV below the GaAs bandgap, i.e. in the 910--970 nm wavelength range. We find a pronounced residual absorption in forward bias, which we attribute to Fermi-level pinning at the waveguide surface, producing over 20 dB/mm loss at room temperature. These results are essential for understanding the origin of loss in nanophotonic devices operating in the emission range of self-assembled InAs semiconductor quantum dots, towards the realization of scalable quantum photonic integrated circuits.

physics.optics↗

arXiv2021

Radiative Auger Process in the Single-Photon Limit

In a multi-electron atom, an excited electron can decay by emitting a photon. Typically, the leftover electrons are in their ground state. In a radiative Auger process, the leftover electrons are in an excited state and a redshifted photon is created. In a semiconductor quantum dot, radiative Auger is predicted for charged excitons. Here we report the observation of radiative Auger on trions in single quantum dots. For a trion, a photon is created on electron-hole recombination, leaving behind a single electron. The radiative Auger process promotes this additional (Auger) electron to a higher shell of the quantum dot. We show that the radiative Auger effect is a powerful probe of this single electron: the energy separations between the resonance fluorescence and the radiative Auger emission directly measure the single-particle splittings of the electronic states in the quantum dot with high precision. In semiconductors, these single-particle splittings are otherwise hard to access by optical means as particles are excited typically in pairs, as excitons. After the radiative Auger emission, the Auger carrier relaxes back to the lowest shell. Going beyond the original theoretical proposals, we show how applying quantum optics techniques to the radiative Auger photons gives access to the single-electron dynamics, notably relaxation and tunneling. This is also hard to access by optical means: even for quasi-resonant $p$-shell excitation, electron relaxation takes place in the presence of a hole, complicating the relaxation dynamics. The radiative Auger effect can be exploited in other semiconductor nanostructures and quantum emitters in the solid state to determine the energy levels and the dynamics of a single carrier.

cond-mat.mes-hall↗

arXiv2021

Experimental reconstruction of the few-photon nonlinear scattering matrix from a single quantum dot in a nanophotonic waveguide

Coherent photon-emitter interfaces offer a way to mediate efficient nonlinear photon-photon interactions, much needed for quantum information processing. Here we experimentally study the case of a two-level emitter, a quantum dot, coupled to a single optical mode in a nanophotonic waveguide. We carry out few-photon transport experiments and record the statistics of the light to reconstruct the scattering matrix elements of 1- and 2-photon components. This provides direct insight to the complex nonlinear photon interaction that contains rich many-body physics.

quant-ph↗

arXiv2020

Narrow optical linewidths and spin pumping on charge-tunable, close-to-surface self-assembled quantum dots in an ultra-thin diode

We demonstrate full charge control, narrow optical linewidths, and optical spin pumping on single self-assembled InGaAs quantum dots embedded in a $162.5\,\text{nm}$ thin diode structure. The quantum dots are just $88\,\text{nm}$ from the top GaAs surface. We design and realize a p-i-n-i-n diode that allows single-electron charging of the quantum dots at close-to-zero applied bias. In operation, the current flow through the device is extremely small resulting in low noise. In resonance fluorescence, we measure optical linewidths below $2\,μ\text{eV}$, just a factor of two above the transform limit. Clear optical spin pumping is observed in a magnetic field of $0.5\,\text{T}$ in the Faraday geometry. We present this design as ideal for securing the advantages of self-assembled quantum dots -- highly coherent single photon generation, ultra-fast optical spin manipulation -- in the thin diodes required in quantum nano-photonics and nano-phononics applications.

cond-mat.mes-hall↗

arXiv2020

Deterministic positioning of nanophotonic waveguides around single self-assembled quantum dots

The capability to embed self-assembled quantum dots (QDs) at predefined positions in nanophotonic structures is key to the development of complex quantum photonic architectures. Here, we demonstrate that QDs can be deterministically positioned in nanophotonic waveguides by pre-locating QDs relative to a global reference frame using micro-photoluminescence ($μ$PL) spectroscopy. After nanofabrication, $μ$PL images reveal misalignments between the central axis of the waveguide and the embedded QD of only $(9\pm46$) nm and $(1\pm33$) nm, for QDs embedded in undoped and doped membranes, respectively. A priori knowledge of the QD positions allows us to study the spectral changes introduced by nanofabrication. We record average spectral shifts ranging from 0.1 to 1.1 nm, indicating that the fabrication-induced shifts can generally be compensated by electrical or thermal tuning of the QDs. Finally, we quantify the effects of the nanofabrication on the polarizability, the permanent dipole moment and the emission frequency at vanishing electric field of different QD charge states, finding that these changes are constant down to QD-surface separations of only 70 nm. Consequently, our approach deterministically integrates QDs into nanophotonic waveguides whose light-fields contain nanoscale structure and whose group index varies at the nanometer level.

quant-ph↗

arXiv2020

One-way quantum repeater based on near-deterministic photon-emitter interfaces

We propose a novel one-way quantum repeater architecture based on photonic tree-cluster states. Encoding a qubit in a photonic tree-cluster protects the information from transmission loss and enables long-range quantum communication through a chain of repeater stations. As opposed to conventional approaches that are limited by the two-way communication time, the overall transmission rate of the current quantum repeater protocol is determined by the local processing time enabling very high communication rates. We further show that such a repeater can be constructed with as little as two stationary qubits and one quantum emitter per repeater station, which significantly increases the experimental feasibility. We discuss potential implementations with diamond defect centers and semiconductor quantum dots efficiently coupled to photonic nanostructures and outline how such systems may be integrated into repeater stations.

quant-ph↗

arXiv2020

A coherent spin-photon interface with waveguide induced cycling transitions

Solid-state quantum dots are promising candidates for efficient light-matter interfaces connecting internal spin degrees of freedom to the states of emitted photons. However, selection rules prevent the combination of efficient spin control and optical cyclicity in this platform. By utilizing a photonic crystal waveguide we here experimentally demonstrate optical cyclicity up to $\approx15$ through photonic state engineering while achieving high fidelity spin initialization and coherent optical spin control. These capabilities pave the way towards scalable multi-photon entanglement generation and on-chip spin-photon gates.

quant-ph↗

arXiv2020

Near Transform-limited Quantum Dot Linewidths in a Broadband Photonic Crystal Waveguide

Planar nanophotonic structures enable broadband, near-unity coupling of emission from quantum dots embedded within, thereby realizing ideal singe-photon sources. The efficiency and coherence of the single-photon source is limited by charge noise, which results in the broadening of the emission spectrum.We report suppression of the noise by fabricating photonic crystal waveguides in a gallium arsenide membrane containing quantum dots embedded in a $p$-$i$-$n$ diode. Local electrical contacts in the vicinity of the waveguides minimize the leakage current and allow fast electrical control ($\approx$4 MHz bandwidth) of the quantum dot resonances. Resonant linewidth measurements of $79$ quantum dots coupled to the photonic crystal waveguides exhibit near transform-limited emission over a 6 nm wide range of emission wavelengths. Importantly, the local electrical contacts allow independent tuning of multiple quantum dots on the same chip, which together with the transform-limited emission are key components in realizing multiemitter-based quantum information processing.

quant-ph↗

arXiv2020

Scalable integrated single-photon source

Photonic qubits are key enablers for quantum-information processing deployable across a distributed quantum network. An on-demand and truly scalable source of indistinguishable single photons is the essential component enabling high-fidelity photonic quantum operations. A main challenge is to overcome noise and decoherence processes in order to reach the steep benchmarks on generation efficiency and photon indistinguishability required for scaling up the source. We report on the realization of a deterministic single-photon source featuring near-unity indistinguishability using a quantum dot in an 'on-chip' planar nanophotonic waveguide circuit. The device produces long strings of $>100$ single photons without any observable decrease in the mutual indistinguishability between photons. A total generation rate of $122$ million photons per second is achieved corresponding to an 'on-chip' source efficiency of $84 \%$. These specifications of the single-photon source are benchmarked for boson sampling and found to enable scaling into the regime of quantum advantage.

quant-ph↗

arXiv2020

On-chip deterministic operation of quantum dots in dual-mode waveguides for a plug-and-play single-photon source

A deterministic source of coherent single photons is an enabling device of quantum-information processing for quantum simulators, and ultimately a full-fledged quantum internet. Quantum dots (QDs) in nanophotonic structures have been employed as excellent sources of single photons, and planar waveguides are well suited for scaling up to multiple photons and emitters exploring near-unity photon-emitter coupling and advanced active on-chip functionalities. An ideal single-photon source requires suppressing noise and decoherence, which notably has been demonstrated in electrically-contacted heterostructures. It remains a challenge to implement deterministic resonant excitation of the QD required for generating coherent single photons, since residual light from the excitation laser should be suppressed without compromising source efficiency and scalability. Here, we present the design and realization of a novel planar nanophotonic device that enables deterministic pulsed resonant excitation of QDs through the waveguide. Through nanostructure engineering, the excitation light and collected photons are guided in two orthogonal waveguide modes enabling deterministic operation. We demonstrate a coherent single-photon source that simultaneously achieves high-purity ($g^{(2)}(0)$ = 0.020 $\pm$ 0.005), high-indistinguishability ($V$ = 96 $\pm$ 2 %), and $>$80 % coupling efficiency into the waveguide. The novel `plug-and-play' coherent single-photon source could be operated unmanned for several days and will find immediate applications, e.g., for constructing heralded multi-photon entanglement sources for photonic quantum computing or sensing.

quant-ph↗