SearcharxivSearch

arXiv subjects

Peter Mascher

Publications and source records attributed to Peter Mascher.

4 recordsLinked to original sources

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics

Erbium-implanted tellurite waveguides with low-temperature post-implantation activation and signal enhancement

In this paper, we demonstrate erbium ion implantation and signal enhancement in tellurium oxide hybrid waveguides. Silicon nitride strips with a width of 2 $\mu$m and a height of 100 nm were clad with a 110-nm-thick tellurium oxide layer to form hybrid waveguides, followed by erbium ion implantation at an energy of 200 keV and a dose of $1\times10^{15} ions/cm^{2}$, with a projected peak implantation depth of approximately 50 nm into the tellurium oxide layer. After low-temperature annealing at 150 {\deg}C for 30 minutes, the propagation loss decreased from 1.7 to 0.9 dB/cm, while the erbium lifetime increased from 40 $\mu$m to over 800 $\mu$m. We measure a small-signal enhancement of 9 dB in an 11-cm-long waveguide at a wavelength of 1550 nm. These results demonstrate progress towards a low-temperature post-ion implantation process for incorporating erbium and other rare earth ions into tellurium oxide films for integrated photonic applications.

physics.optics

Surface acoustic waves Brillouin photonics on a silicon nitride chip

Seamlessly integrating stimulated Brillouin scattering (SBS) in a low-loss and mature photonic integration platform remains a complicated task. Virtually all current approaches fall short in simultaneously achieving strong SBS, low losses, and technological scalability. In this work we incorporate stong SBS into a standard silicon nitride platform by a simple deposition of a tellurium oxide layer, a commonly used material for acousto-optic modulators. In these heterogeneously integrated waveguides, we harness novel SBS interactions actuated by surface acoustic waves (SAWs) leading to more than two orders of magnitude gain enhancement. Three novel applications are demonstrated in this platform: (i) a silicon nitride Brillouin amplifier with 5 dB net optical gain, (ii) a compact intermodal stimulated Brillouin laser (SBL) capable of high purity radio frequency (RF) signal generation with 7 Hz intrinsic linewidth, and (iii) a widely tunable microwave photonic notch filter with ultra-narrow linewidth of 2.2 MHz enabled by Brillouin induced opacity. These advancements can unlock an array of new RF and optical technologies to be directly integrated in silicon nitride.

physics.optics

Octave-spanning supercontinuum generation in a CMOS-compatible thin Si3N4 waveguide coated with highly nonlinear TeO2

Supercontinuum generation (SCG) is an important nonlinear optical process enabling broadband light sources for many applications, for which silicon nitride(Si3N4) has emerged as a leading on-chip platform.To achieve suitable group velocity dispersion and high confinement for broadband SCG the Si3N4 waveguide layer used is typically thick (>~700 nm), which can lead to high stress and cracks unless specialized processing steps are used. Here, we report on efficient octave spanning SCG in a thinner moderate-confinement 400-nm Si3N4 platform using a highly nonlinear tellurium oxide (TeO2) coating. An octave-spanning supercontinuum is achieved at a low peak power of 258 W using a 100-fs laser centered at 1565 nm. Our numerical simulations agree well with the experimental results showing an increase of waveguide's nonlinear parameter by a factor of 2.5 when coating the Si3N4 waveguide with TeO2 film. This work demonstrates highly efficient SCG via effective dispersion engineering and an enhanced nonlinearity in a CMOS-compatible hybrid TeO2-Si3N4 waveguides and a promising route to monolithically integrated nonlinear, linear, and active functionalities on a single silicon photonic chip.

physics.optics