Searcharxiv⌕ Search

arXiv subjects

Peter S. Barry

Publications and source records attributed to Peter S. Barry.

At least 19 recordsLinked to original sources
arXiv2026

A waveguide spectrometer for high-resolution millimeter-wave imaging

We present the design and development of a novel, compact integrated on-chip spectrometer operating at millimeter (mm) and submillimeter (sub-mm) wavelengths. The Superconducting Waveguide Integrated Submillimeter Spectrometer (SWISS) promises significant improvements in spectral resolution, optical efficiency, and frequency coverage over current mm-wave spectrometers by using a free-space rectangular waveguide architecture. Light is coupled in through the antenna front end, which separates the two polarizations and passes them to the waveguide spectrometer through a contactless metamaterial transition. Each waveguide spectrometer consists of a feedline coupled to a series of filters based on single-pole cavity resonators with varying resonant frequencies. To maximize packing density, the filter banks are oriented out of the focal plane, and an E-plane bend in the output from the cavity filters enables a planar and scalable construction. The output of each filter is coupled to a kinetic inductance detector (KID) to enable high multiplexing factors. The spectrometer is fabricated using stacks of silicon wafers etched with a deep reactive-ion etch (DRIE) and metallized. In these proceedings, we discuss current development on a SWISS prototype including measurements on a prototype antenna front end contactless transition and fabrication a prototype waveguide spectrometer.

astro-ph.IM↗
arXiv2026

SuMAC: On-sky demonstration of multi-pixel on-chip millimeter-wave spectroscopy at the Large Millimeter Telescope

The SuperSpec-MUSCAT Collaboration (SuMAC) is an effort to operate SuperSpec spectrometers in the MUSCAT instrument at the Large Millimeter Telescope (LMT). SuperSpec is an on-chip filterbank spectrometer using kinetic inductance detectors (KIDs), with moderate $R\sim 200$ spectral resolution for observing in the 1 mm atmospheric window (190-300 GHz). While nominally a continuum camera operating a 1.1 mm, MUSCAT was also designed to operate as a testbed for pioneering detection technologies. In July 2025, three SuperSpec devices were installed and commissioned in the MUSCAT cryostat with minimal modifications to the system. This work presents an overview of SuperSpec's deployment and performance in MUSCAT along with the main results from the Summer 2025 observation campaign. Highlights include the detection of CO emission line in the galaxy NGC253, mapping the Orion KL region, and preliminary line intensity mapping scans.

astro-ph.IM↗
arXiv2026

On-Chip Resonator for Nonlinear Kinetic Inductance Characterisation and Future Spectrometry Applications

This work focuses on the development and demonstration of tunable superconducting on-chip resonator, leveraging the intrinsic current-dependent non-linear kinetic inductance of superconducting aluminium, and investigating the effect of oxygen content. Thin films are deposited using standard metal evaporation. We present results from a comprehensive study based on a series of evaporated Al thin films. This research aims to inform and constrain optimisation strategies for the design of mm-wave on-chip spectrometers, particularly regarding yield, resolution, and efficiency. By systematically varying film stoichiometry, we use a series of DC measurements to extract fundamental film properties such as resistivity, critical current and critical temperature. Furthermore, we employ low-loss DC-coupled microwave resonators to characterise both their microwave properties and the non-linear kinetic inductance, comparing these findings to a determined non-linear kinetic model. Finally, we discuss the possibility of usage in a parametric amplifier.

astro-ph.IM↗
arXiv2026

Low-noise Fourier Transform Spectroscopy Enabled by Superconducting On-Chip Filterbank Spectrometers

Historically employed spectroscopic architectures used for large field of view mapping spectroscopy in millimetere and sub-millimetre astronomy suffer from significant drawbacks. On-chip filterbank spectrometers are a promising technology in this respect; however, they must overcome an orders-of-magnitude increase in detector counts, efficiency loss due to dielectric properties, and stringent fabrication tolerances that currently limit scaling to resolutions of order 1000 over a large array. We propose coupling a medium-resolution Fourier transform spectrometer to a low-resolution filterbank spectrometer focal plane, which serves as a post-dispersion element. In this arrangement, medium resolution imaging spectroscopy is provided by the Fourier transform spectrometer, while the low resolution filterbank spectrometer serves to decrease the photon noise inherent in typical broadband Fourier transform spectrometer measurements by over an order of magnitude. This is achieved while maintaining the excellent imaging advantages of both architectures. We present predicted mapping speeds for a filterbank-dispersed Fourier transform spectrometer from a ground-based site and a balloon-borne platform. We also demonstrate the potential that an instrument of this type has for an R~1000 line intensity mapping experiment using the James Clerk Maxwell Telescope as an example platform. We demonstrate that a filterbank-dispersed Fourier transform spectrometer would be capable of R~1000 measurements of CO power spectra with a signal-to-noise ratio of 10--100 with surveys of $10^5$--$10^6$ spectrometer hours.

astro-ph.IM↗
arXiv2025

Room temperature reactive sputtering deposition of titanium nitride with high sheet kinetic inductance

Superconducting thin films with high intrinsic kinetic inductance $L_{k}$ are important for high-sensitivity detectors, enabling strong coupling in hybrid quantum systems, and enhancing nonlinearities in quantum devices. We report the room-temperature reactive sputtering of titanium nitride thin films with a critical temperature $T_{c}$ of \SI{3.8}{K} and a thickness of \SI{27}{nm}. Fabricated into resonators, these films exhibit a sheet kinetic inductance $L_{k, \square}$ of 394~$\textrm{pH}/\square$, as inferred from resonant frequency measurements. %from this film and measure quality factors of $4\times 10^{4}$; these quality factors are likely limited by the low resistivity wafer. X-ray diffraction analysis confirms the formation of stoichiometric TiN, with no residual unreacted titanium. The films also demonstrate a characteristic sheet resistivity of 475~$Ω/\square$, yielding an impedance an order of magnitude higher than conventional 50~$Ω$ resonators. This property could enhance microwave single\textendash photon coupling strength by an order of magnitude, offering transformative potential for hybrid quantum systems and quantum sensing. Furthermore, the high $L_{k}$ enables Kerr nonlinearities comparable to state\textendash of\textendash the\textendash art quantum devices. Combined with its relatively high $T_{c}$, this thin film presents a promising platform for superconducting devices, including amplifiers and qubits operating at higher temperatures.

cond-mat.supr-con↗
arXiv2025

In-situ control of the resonant frequency of kinetic inductance detectors with multiplexed readout

Large multiplexing factors are a primary advantage of kinetic inductance detectors (KIDs), but the implementation of high density arrays still presents significant challenges. Deviations between designed and achieved resonant frequencies are common, and differential loading and responsivity variation across an array may lead to dynamic inter-resonator interactions. It is therefore valuable to be able to both set and maintain the resonant frequency of a KID in situ, using the readout system. We show that it is possible to alter the resonant frequency of the devices by multiple linewidths through the application of readout current, and establish a new stable operational bias point at the driven frequency by making use of the hysteretic bistability commonly seen as bifurcation in frequency-domain measurements. We examine this interaction using a readout tone at fixed frequency positioned near or within the unbiased resonant bandwidth. Development of a control methodology based on this principle remains in an early stage, but a foundational step is understanding the interaction of the readout current with the resonator, in particular its influence on the resonant frequency. In this work, we study conventional KIDs with no physical isolation from the substrate, so we posit that the readout current primarily interacts with the resonator via non-thermal mechanisms, resulting in a predominantly reactive response. This behaviour is reproduced by a simple lumped-element circuit model of the resonance and readout system, providing a straightforward framework for analysis and interpretation. This demonstration is an important early step in the development of techniques which seek to dynamically alter the resonant frequencies of conventional KID arrays, and sets the stage for fast active resonant frequency control under operational conditions.

physics.ins-det↗
arXiv2024

A first demonstration of active feedback control and multi-frequency imaging techniques for kinetic inductance detectors

RF-ICE is a signal processing platform for the readout of large arrays of superconducting resonators. Designed for flexibility, the system's low digital latency and ability to independently and dynamically set the frequency and amplitude of probe tones in real time has enabled previously-inaccessible views of resonator behaviour, and opened the door to novel resonator control schemes. We introduce a multi-frequency imaging technique, developed with RF-ICE, which allows simultaneous observation of the entire resonance bandwidth. We demonstrate the use of this technique in the examination of the response of superconducting resonators to variations in applied readout current and thermal loading. We observe that, used in conjunction with a conventional frequency sweep at sufficiently large amplitude to induce resonance bifurcation, the multi-frequency imaging technique reveals a resonator response which is not captured by the frequency sweep measurement alone. We demonstrate that equivalent resonant frequency shifts can be achieved using either thermal, optical, or readout loading, and use this equivalence to counteract a change in thermal loading by digitally modulating the readout current through a resonator. We develop and implement a proof-of-concept closed-loop negative electro-quasiparticle feedback algorithm which first sets and then maintains the resonant frequency of a lumped element kinetic inductance detector while the loading on it is varied. Although this simple implementation is not yet suitable to deploy at scale, it demonstrates the utility of this feedback technique to improve linearity while addressing amplifier distortion, resonator response non-uniformity, and crosstalk. It can be applied to kinetic inductors in non-bolometric operation, and sets the stage for future developments.

astro-ph.IM↗
arXiv2023

Characterization of MKIDs for CMB observation at 220 GHz with the South Pole Telescope

We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $α_k = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $η\sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5\% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$ for both detector orientations.

astro-ph.IM↗
arXiv2022

The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer

Superconducting on-chip filter-banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and sub-millimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $λ/2$ microstrip resonator to define a narrow ($λ/Δλ= 300$) spectral pass band, the filtered output of a given spectrometer channel directly connects to a Lumped Element Kinetic Inductance Detector (LEKID). We show the tolerance analysis of our design, demonstrating $<11\%$ change in filter quality factor to any one realistic fabrication errors and a full filter-bank efficiency forecast to be 60\% after accounting for fabrication errors and dielectric loss tangent.

astro-ph.IM↗
arXiv2022

Large-Format, Transmission-Line-Coupled Kinetic Inductance Detector Arrays for HEP at Millimeter Wavelengths

The kinetic inductance detector (KID) is a versatile and scalable detector technology with a wide range of applications. These superconducting detectors offer significant advantages: simple and robust fabrication, intrinsic multiplexing that will allow thousands of detectors to be read out with a single microwave line, and simple and low cost room temperature electronics. These strengths make KIDs especially attractive for HEP science via mm-wave cosmological studies. Examples of these potential cosmological observations include studying cosmic acceleration (Dark Energy) through measurements of the kinetic Sunyaev-Zeldovich effect, precision cosmology through ultra-deep measurements of small-scale CMB anisotropy, and mm-wave spectroscopy to map out the distribution of cosmological structure at the largest scales and highest redshifts. The principal technical challenge for these kinds of projects is the successful deployment of large-scale high-density focal planes -- a need that can be addressed by KID technology. In this paper, we present an overview of microstrip-coupled KIDs for use in mm-wave observations and outline the research and development needed to advance this class of technology and enable these upcoming large-scale experiments.

physics.ins-det↗
arXiv2022

Broadband solenoidal haloscope for terahertz axion detection

We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry enables enclosure in standard cryostats and high-field solenoids, overcoming limitations of current dish antennas. A pilot 0.7 m$^{2}$ barrel experiment planned at Fermilab is projected to surpass existing dark photon coupling constraints by over a decade with one-day runtime. Axion sensitivity requires $<10^{-20}$ W/$\sqrt{\textrm{Hz}}$ sensor noise equivalent power with a 10 T solenoid and 10 m$^{2}$ barrel. We project BREAD sensitivity for various sensor technologies and discuss future prospects.

physics.ins-det↗
arXiv2022

Snowmass2021 Cosmic Frontier: Cosmic Microwave Background Measurements White Paper

This is a solicited whitepaper for the Snowmass 2021 community planning exercise. The paper focuses on measurements and science with the Cosmic Microwave Background (CMB). The CMB is foundational to our understanding of modern physics and continues to be a powerful tool driving our understanding of cosmology and particle physics. In this paper, we outline the broad and unique impact of CMB science for the High Energy Cosmic Frontier in the upcoming decade. We also describe the progression of ground-based CMB experiments, which shows that the community is prepared to develop the key capabilities and facilities needed to achieve these transformative CMB measurements.

astro-ph.CO↗
arXiv2022

Snowmass 2021 CMB-S4 White Paper

This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.

astro-ph.CO↗
arXiv2021

Optical leakage mitigation in ortho-mode transducer detectors for microwave applications

Planar ortho-mode transducers (OMTs) are a commonly used method of coupling optical signals between waveguides and on-chip circuitry and detectors. While the ideal OMT-waveguide coupling requires minimal disturbance to the waveguide, when used for mm-wave applications the waveguide is typically constructed from two sections to allow the OMT probes to be inserted into the waveguide. This break in the waveguide is a source of signal leakage and can lead to loss of performance and increased experimental systematic errors. Here we report on the development of new OMT-to-waveguide coupling structures with the goal of reducing leakage at the detector wafer interface. The pixel to pixel optical leakage due to the gap between the coupling waveguide and the backshort is reduced by means of a protrusion that passes through the OMT membrane and electrically connects the two waveguide sections on either side of the wafer. High frequency electromagnetic simulations indicate that these protrusions are an effective method to reduce optical leakage in the gap by ~80% percent, with a ~60% filling factor, relative to an standard OMT coupling architecture. Prototype devices have been designed to characterize the performance of the new design using a relative measurement with varying filling factors. We outline the simulation setup and results, and present a chip layout and sample box that will be used to perform the initial measurements.

astro-ph.IM↗
arXiv2020

CMB-S4: Forecasting Constraints on Primordial Gravitational Waves

CMB-S4---the next-generation ground-based cosmic microwave background (CMB) experiment---is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. Among the science cases pursued with CMB-S4, the quest for detecting primordial gravitational waves is a central driver of the experimental design. This work details the development of a forecasting framework that includes a power-spectrum-based semi-analytic projection tool, targeted explicitly towards optimizing constraints on the tensor-to-scalar ratio, $r$, in the presence of Galactic foregrounds and gravitational lensing of the CMB. This framework is unique in its direct use of information from the achieved performance of current Stage 2--3 CMB experiments to robustly forecast the science reach of upcoming CMB-polarization endeavors. The methodology allows for rapid iteration over experimental configurations and offers a flexible way to optimize the design of future experiments given a desired scientific goal. To form a closed-loop process, we couple this semi-analytic tool with map-based validation studies, which allow for the injection of additional complexity and verification of our forecasts with several independent analysis methods. We document multiple rounds of forecasts for CMB-S4 using this process and the resulting establishment of the current reference design of the primordial gravitational-wave component of the Stage-4 experiment, optimized to achieve our science goals of detecting primordial gravitational waves for $r > 0.003$ at greater than $5σ$, or, in the absence of a detection, of reaching an upper limit of $r < 0.001$ at $95\%$ CL.

astro-ph.CO↗
arXiv2019

CMB-S4 Decadal Survey APC White Paper

We provide an overview of the science case, instrument configuration and project plan for the next-generation ground-based cosmic microwave background experiment CMB-S4, for consideration by the 2020 Decadal Survey.

astro-ph.IM↗
arXiv2018

MUSCAT: The Mexico-UK Sub-Millimetre Camera for AsTronomy

The Mexico-UK Sub-millimetre Camera for AsTronomy (MUSCAT) is a large-format, millimetre-wave camera consisting of 1,500 background-limited lumped-element kinetic inductance detectors (LEKIDs) scheduled for deployment on the Large Millimeter Telescope (Volcán Sierra Negra, Mexico) in 2018. MUSCAT is designed for observing at 1.1 mm and will utilise the full 40' field of view of the LMTs upgraded 50-m primary mirror. In its primary role, MUSCAT is designed for high-resolution follow-up surveys of both galactic and extra-galactic sub-mm sources identified by Herschel. MUSCAT is also designed to be a technology demonstrator that will provide the first on-sky demonstrations of novel design concepts such as horn-coupled LEKID arrays and closed continuous cycle miniature dilution refrigeration. Here we describe some of the key design elements of the MUSCAT instrument such as the novel use of continuous sorption refrigerators and a miniature dilutor for continuous 100-mK cooling of the focal plane, broadband optical coupling to Aluminium LEKID arrays using waveguide chokes and anti-reflection coating materials as well as with the general mechanical and optical design of MUSCAT. We explain how MUSCAT is designed to be simple to upgrade and the possibilities for changing the focal plane unit that allows MUSCAT to act as a demonstrator for other novel technologies such as multi-chroic polarisation sensitive pixels and on-chip spectrometry in the future. Finally, we will report on the current status of MUSCAT's commissioning.

astro-ph.IM↗