arXiv subjects

Peter Seiler

Publications and source records attributed to Peter Seiler.

82 records · Page 5Linked to original sources

arXiv2019

Noncausal FIR Zames-Falb Multiplier Search for Exponential Convergence Rate

In the existing literature, there are two approaches to estimate tighter bounds of the exponential convergence rate of stable Lure systems. On one hand, the classical integral quadratic constraint (IQC) framework can be applied under loop-transformation, so the stability of the new loop implies the convergence of the original loop. On the other hand, it is possible to modify the IQC framework, the so-called rho-IQC framework, in such a way that the convergence rate is directly obtained over the original loop. In this technical note, we extend the literature results from the search for a causal finite impulse response (FIR) Zames-Falb multiplier to the noncausal case. We show that the multipliers by the two approaches are equivalent by a change of variable. However, the factorisation of the Zames-Falb rho-IQC is restricted compared to the Zames-Falb IQC, so an unified factorisation is proposed. Finally, numerical examples illustrate that noncausal multipliers lead to less-conservative results.

math.OC↗

arXiv2018

Conic-sector-based analysis and control synthesis for linear parameter varying systems

We present a conic sector theorem for linear parameter varying (LPV) systems in which the traditional definition of conicity is violated for certain values of the parameter. We show that such LPV systems can be defined to be conic in an average sense if the parameter trajectories are restricted so that the system operates with such values of the parameter sufficiently rarely. We then show that such an average definition of conicity is useful in analyzing the stability of the system when it is connected in feedback with a conic system with appropriate conic properties. This can be regarded as an extension of the classical conic sector theorem. Based on this modified conic sector theorem, we design conic controllers that allow the closed-loop system to operate in nonconic parameter regions for brief periods of time. Due to this extra degree of freedom, these controllers lead to less conservative performance than traditional designs, in which the controller parameters are chosen based on the largest cone that the plant dynamics are contained in. We demonstrate the effectiveness of the proposed design in stabilizing a power grid with very high penetration of renewable energy while minimizing power transmission losses.

eess.SY↗

arXiv2017

Finite Horizon Robustness Analysis of LTV Systems Using Integral Quadratic Constraints

The goal of this paper is to assess the robustness of an uncertain linear time-varying (LTV) system on a finite time horizon. The uncertain system is modeled as a connection of a known LTV system and a perturbation. The input/output behavior of the perturbation is described by time-domain, integral quadratic constraints (IQCs). Typical notions of robustness, e.g. nominal stability and gain/phase margins, can be insufficient for finite-horizon analysis. Instead, this paper focuses on robust induced gains and bounds on the reachable set of states. Sufficient conditions to compute robust performance bounds are formulated using dissipation inequalities and IQCs. The analysis conditions are provided in two equivalent forms as Riccati differential equations and differential linear matrix inequalities. A computational approach is provided that leverages both forms of the analysis conditions. The approach is demonstrated with two examples

eess.SY↗

arXiv2017

Single Molecule Studies Under Constant Force Using Model Based Robust Control Design

Optical tweezers have enabled important insights into intracellular transport through the investigation of motor proteins, with their ability to manipulate particles at the microscale, affording femto Newton force resolution. Its use to realize a constant force clamp has enabled vital insights into the behavior of motor proteins under different load conditions. However, the varying nature of disturbances and the effect of thermal noise pose key challenges to force regulation. Furthermore, often the main aim of many studies is to determine the motion of the motor and the statistics related to the motion, which can be at odds with the force regulation objective. In this article, we propose a mixed objective H2-Hinfinity optimization framework using a model-based design, that achieves the dual goals of force regulation and real time motion estimation with quantifiable guarantees. Here, we minimize the Hinfinity norm for the force regulation and error in step estimation while maintaining the H2 norm of the noise on step estimate within user specified bounds. We demonstrate the efficacy of the framework through extensive simulations and an experimental implementation using an optical tweezer setup with live samples of the motor protein kinesin; where regulation of forces below 1 pico Newton with errors below 10 percent is obtained while simultaneously providing real time estimates of motor motion.

math.OC↗

arXiv2017

A Unified Analysis of Stochastic Optimization Methods Using Jump System Theory and Quadratic Constraints

We develop a simple routine unifying the analysis of several important recently-developed stochastic optimization methods including SAGA, Finito, and stochastic dual coordinate ascent (SDCA). First, we show an intrinsic connection between stochastic optimization methods and dynamic jump systems, and propose a general jump system model for stochastic optimization methods. Our proposed model recovers SAGA, SDCA, Finito, and SAG as special cases. Then we combine jump system theory with several simple quadratic inequalities to derive sufficient conditions for convergence rate certifications of the proposed jump system model under various assumptions (with or without individual convexity, etc). The derived conditions are linear matrix inequalities (LMIs) whose sizes roughly scale with the size of the training set. We make use of the symmetry in the stochastic optimization methods and reduce these LMIs to some equivalent small LMIs whose sizes are at most 3 by 3. We solve these small LMIs to provide analytical proofs of new convergence rates for SAGA, Finito and SDCA (with or without individual convexity). We also explain why our proposed LMI fails in analyzing SAG. We reveal a key difference between SAG and other methods, and briefly discuss how to extend our LMI analysis for SAG. An advantage of our approach is that the proposed analysis can be automated for a large class of stochastic methods under various assumptions (with or without individual convexity, etc).

stat.ML↗

arXiv2017

Conditions for the equivalence between IQC and graph separation stability results

This paper provides a link between time-domain and frequency-domain stability results in the literature. Specifically, we focus on the comparison between stability results for a feedback interconnection of two nonlinear systems stated in terms of frequency-domain conditions. While the Integral Quadratic Constrain (IQC) theorem can cope with them via a homotopy argument for the Lurye problem, graph separation results require the transformation of the frequency-domain conditions into truncated time-domain conditions. To date, much of the literature focuses on "hard" factorizations of the multiplier, considering only one of the two frequency-domain conditions. Here it is shown that a symmetric, "doubly-hard" factorization is required to convert both frequency-domain conditions into truncated time-domain conditions. By using the appropriate factorization, a novel comparison between the results obtained by IQC and separation theories is then provided. As a result, we identify under what conditions the IQC theorem may provide some advantage.

eess.SY↗

arXiv2015

An Overview of Integral Quadratic Constraints for Delayed Nonlinear and Parameter-Varying Systems

A general framework is presented for analyzing the stability and performance of nonlinear and linear parameter varying (LPV) time delayed systems. First, the input/output behavior of the time delay operator is bounded in the frequency domain by integral quadratic constraints (IQCs). A constant delay is a linear, time-invariant system and this leads to a simple, intuitive interpretation for these frequency domain constraints. This simple interpretation is used to derive new IQCs for both constant and varying delays. Second, the performance of nonlinear and LPV delayed systems is bounded using dissipation inequalities that incorporate IQCs. This step makes use of recent results that show, under mild technical conditions, that an IQC has an equivalent representation as a finite-horizon time-domain constraint. Numerical examples are provided to demonstrate the effectiveness of the method for both class of systems.

eess.SY↗

arXiv2014

Nondegeneracy and Inexactness of Semidefinite Relaxations of Optimal Power Flow

The Optimal Power Flow (OPF) problem can be reformulated as a nonconvex Quadratically Constrained Quadratic Program (QCQP). There is a growing body of work on the use of semidefinite programming relaxations to solve OPF. The relaxation is exact if and only if the corresponding optimal solution set contains a rank-one matrix. In this paper, we establish sufficient conditions guaranteeing the nonexistence of a rank-one matrix in said optimal solution set. In particular, we show that under mild assumptions on problem nondegeneracy, any optimal solution to the semidefinite relaxation will have rank greater than one, if the number of equality and active inequality constraints is at least twice the number of buses in the network. The sufficient condition holds for arbitrary network topologies (including tree networks). We empirically evaluate the practical implications of these results on several test cases from the literature.

math.OC↗

arXiv2013

SOSOPT: A Toolbox for Polynomial Optimization

SOSOPT is a Matlab toolbox for formulating and solving Sum-of-Squares (SOS) polynomial optimizations. This document briefly describes the use and functionality of this toolbox. Section 1 introduces the problem formulations for SOS tests, SOS feasibility problems, SOS optimizations, and generalized SOS problems. Section 2 reviews the SOSOPT toolbox for solving these optimizations. This section includes information on toolbox installation, formulating constraints, solving SOS optimizations, and setting optimization options. Finally, Section 3 briefly reviews the connections between SOS optimizations and semidefinite programs (SDPs). It is the connection to SDPs that enables SOS optimizations to be solved in an efficient manner

math.OC↗

arXiv2013

Simplification Methods for Sum-of-Squares Programs

A sum-of-squares is a polynomial that can be expressed as a sum of squares of other polynomials. Determining if a sum-of-squares decomposition exists for a given polynomial is equivalent to a linear matrix inequality feasibility problem. The computation required to solve the feasibility problem depends on the number of monomials used in the decomposition. The Newton polytope is a method to prune unnecessary monomials from the decomposition. This method requires the construction of a convex hull and this can be time consuming for polynomials with many terms. This paper presents a new algorithm for removing monomials based on a simple property of positive semidefinite matrices. It returns a set of monomials that is never larger than the set returned by the Newton polytope method and, for some polynomials, is a strictly smaller set. Moreover, the algorithm takes significantly less computation than the convex hull construction. This algorithm is then extended to a more general simplification method for sum-of-squares programming.

math.OC↗