arXiv subjects

Peter T. Rakich

Publications and source records attributed to Peter T. Rakich.

At least 19 recordsLinked to original sources

arXiv2026

Noise factor of Brillouin amplifiers

Stimulated Brillouin scattering (SBS), an optical nonlinearity arising from photon-phonon interactions, has formed the basis for a large class of optical signal processing devices, including Brillouin amplifiers. A limiting factor of such amplifiers is the noise due to thermal-mechanical fluctuations that the phonons imprint on the optical signal. Prior work has either inferred or experimentally observed a noise factor ($F$) that depends only on the thermal occupation of the phonons ($F\approx 1+n_{th}$). We show that this noise factor results naturally from a Hamiltonian-based spatio-temporal coupled mode treatment in the limit of large Brillouin amplification and when phonon propagation is neglected. Moreover, this theoretical framework allows us to extend our treatment to a much larger and more representative parameter space for emerging SBS systems; specifically, this analysis accounts for the forward or backward nature of the scattering process and the effects of phonon propagation, optical loss, and small Brillouin gains. Our results demonstrate that the noise factor can deviate radically from $F\approx 1+n_{th}$ for a host of modern SBS devices, especially those in which phonon propagation significantly changes the coupled mode dynamics.

physics.optics↗

arXiv2026

Noise and dynamics in acoustoelectric waveguides

We present a quantum field theoretic formulation of acoustoelectric interactions in waveguide-like systems of arbitrary cross-section. Building on an open quantum systems approach, we derive a unified description of plasmon-phonon coupling that incorporates dissipation, noise, and the influence of drift currents. Our analysis captures both bulk and surface plasmon modes, highlighting how drift currents Doppler-shift plasmonic resonances and reshape the phonon noise spectrum. The resulting Heisenberg-Langevin equations yield closed-form expressions for frequency shifts, gain, and noise power spectra, enabling direct evaluation of performance metrics such as the noise factor in acoustoelectric amplifiers and oscillators. In the appropriate limits, this framework reproduces known results while extending them to complex geometries.

physics.optics↗

arXiv2026

Phonon decoherence produced by two-level tunneling states

Phonon modes within pristine crystalline resonators now routinely reach the quantum ground state. Such systems are attractive for quantum information science applications, as advanced fabrication and processing can enable relatively long quantum coherence times, and precision control can be realized through optical, electrical, or qubit coupling. In many state-of-the-art systems, the phonon lifetime is limited by disorder. In particular, native oxides or damaged `dead layers' at surfaces can host two-level tunneling states that lead to a particularly problematic form of dissipation that increases at lower temperatures. As mechanical losses are driven down in systems such as micro-fabricated bulk acoustic wave resonators, tunneling states are expected to emerge as the dominant mechanism for phonon decoherence. A quantitative description of these mesoscopic systems therefore requires a framework that captures interactions between a selected phonon mode and a large ensemble of TLS. Here, we derive a quantum master equation for this coupled system, permitting the phonon decoherence produced by two-level tunneling states to be calculated. As an example, we estimate the lifetime of a variety of quantum states within quartz micro-resonators hosting a thin surface layer of tunneling states. We find that the phonon coherence time is maximized at low temperatures, in spite of increased mechanical dissipation, and that phonon-TLS coupling can be reduced for modes with strain nodes at the surfaces.

cond-mat.mes-hall↗

arXiv2025

Chip-scale modulation-free laser stabilization using vacuum-gap micro-Fabry-Pérot cavity

Narrow-linewidth lasers are vital for a broad range of scientific and technological applications, including atomic clocks and precision sensing. Achieving high frequency stability is often as critical as ensuring scalability, portability, and cost-effectiveness in the development of low noise laser systems. Conventional electro-optic stabilization techniques, such as Pound-Drever-Hall locking to ultra-high-finesse resonators held in a vacuum chamber, provide excellent performance but remain challenging to scale. Here, we propose and experimentally demonstrate a cavity-coupled interferometric laser stabilization technique implemented on a silicon photonic chip and integrated with a compact, scalable micro-Fabry-Pérot cavity. The vacuum-gap optical cavity operates in air, achieving a quality factor of approximately $2.0\times 10^9$ and a fractional frequency instability of $1.45\times 10^{-12}$ at one-second averaging time. Integration of the proposed technique with the compact cavity yields more than 38-fold reduction in the laser's integrated linewidth and nearly three orders of magnitude suppression of frequency noise at 10 Hz offset frequency. The hybrid-integration of the proposed photonic chip with the micro-Fabry-Pérot cavity establishes a scalable and portable route toward chip-integrated ultra-stable lasers, paving the way for precision optical systems deployable beyond laboratory environments.

physics.optics↗

arXiv2025

Lifetime-limited Gigahertz-frequency Mechanical Oscillators with Millisecond Coherence Times

High-frequency mechanical oscillators with long coherence times are essential to realizing a variety of high-fidelity quantum sensors, transducers, and memories. However, the unprecedented coherence times needed for quantum applications require exquisitely sensitive new techniques to probe the material origins of phonon decoherence and new strategies to mitigate decoherence in mechanical oscillators. Here, we combine non-invasive laser spectroscopy techniques with materials analysis to identify key sources of phonon decoherence in crystalline media. Using micro-fabricated high-overtone bulk acoustic-wave resonators ($μ$HBARs) as an experimental testbed, we identify phonon-surface interactions as the dominant source of phonon decoherence in crystalline quartz; lattice distortion, subsurface damage, and high concentration of elemental impurities near the crystal surface are identified as the likely causes. Removal of this compromised surface layer using an optimized polishing process is seen to greatly enhance coherence times, enabling $μ$HBARs with Q-factors of > 240 million at 12 GHz frequencies, corresponding to > 6 ms phonon coherence times and record-level f-Q products. Complementary phonon linewidth and time-domain ringdown measurements, performed using a new Brillouin-based pump-probe spectroscopy technique, reveal negligible dephasing within these oscillators. Building on these results, we identify a path to > 100 ms coherence times as the basis for high-frequency quantum memories. These findings clearly demonstrate that, with enhanced control over surfaces, dissipation and noise can be significantly reduced in a wide range of quantum systems.

quant-ph↗

arXiv2024

Quantum optomechanical control of long-lived bulk acoustic phonons

High-fidelity quantum optomechanical control of a mechanical oscillator requires the ability to perform efficient, low-noise operations on long-lived phononic excitations. Microfabricated high-overtone bulk acoustic wave resonators ($\mathrmμ$HBARs) have been shown to support high-frequency (> 10 GHz) mechanical modes with exceptionally long coherence times (> 1.5 ms), making them a compelling resource for quantum optomechanical experiments. In this paper, we demonstrate a new optomechanical system that permits quantum optomechanical control of individual high-coherence phonon modes supported by such $\mathrmμ$HBARs for the first time. We use this system to perform laser cooling of such ultra-massive (7.5 $\mathrmμ$g) high frequency (12.6 GHz) phonon modes from an occupation of ${\sim}$22 to fewer than 0.4 phonons, corresponding to laser-based ground-state cooling of the most massive mechanical object to date. Through these laser cooling experiments, no absorption-induced heating is observed, demonstrating the resilience of the $\mathrmμ$HBAR against parasitic heating. The unique features of such $\mathrmμ$HBARs make them promising as the basis for a new class of quantum optomechanical systems that offer enhanced robustness to decoherence, necessary for efficient, low-noise photon-phonon conversion.

quant-ph↗

arXiv2024

Harnessing micro-Fabry-Perot reference cavities in photonic integrated circuits

Compact photonic systems that offer high frequency stability and low noise are of increasing importance to applications in precision metrology, quantum computing, communication, and advanced sensing technologies. However, on-chip resonators comprised of dielectrics cannot match the frequency stability and noise characteristics of Fabry-Perot cavities, whose electromagnetic modes live almost entirely in vacuum. In this study, we present a novel strategy to interface micro-fabricated Fabry-Perot cavities with photonic integrated circuits to realize compact, high-performance integrated systems. Using this new integration approach, we demonstrate self-injection locking of an on-chip laser to a milimeter-scale vacuum-gap Fabry-Perot using a circuit interface that transforms the reflected cavity response to enable efficient feedback to the laser. This system achieves a phase noise of -97 dBc/Hz at 10 kHz offset frequency, a fractional frequency stability of 5*10-13 at 10 ms, a 150 Hz 1/pi integral linewidth, and a 35 mHz fundamental linewidth. We also present a complementary integration strategy that utilizes a vertical emission grating coupler and a back-reflection cancellation circuit to realize a fully co-integrated module that effectively redirects the reflected signals and isolates back-reflections with a 10 dB suppression ratio, readily adaptable for on-chip PDH locking. Together, these demonstrations significantly enhance the precision and functionality of RF photonic systems, paving the way for continued advancements in photonic applications.

physics.optics↗

arXiv2024

A mid-infrared Brillouin laser using ultra-high-Q on-chip resonators

Ultra-high-Q optical resonators have facilitated recent advancements in on-chip photonics by effectively harnessing nonlinear phenomena providing useful functionalities. While these breakthroughs, primarily focused on the near-infrared region, have extended interest to longer wavelengths holding importance for monitoring and manipulating molecules, the absence of ultra-high-Q resonators in this region remains a significant challenge. Here, we have developed on-chip microresonators with a remarkable Q-factor of 38 million, surpassing previous mid-infrared records by over 30 times. Employing innovative fabrication techniques, including the spontaneous formation of light-guiding geometries during material deposition, resonators with internal multilayer structures have been seamlessly created and passivated with chalcogenide glasses within a single chamber. Major loss factors, especially airborne-chemical absorption, were thoroughly investigated and mitigated by extensive optimization of resonator geometries and fabrication procedures. This allowed us to access the fundamental loss performance offered by doubly purified chalcogenide glass sources, as demonstrated in their fiber form. Exploiting this ultra-high-Q resonator, we successfully demonstrated Brillouin lasing on a chip for the first time in the mid-infrared, with a threshold power of 91.9 μW and a theoretical Schawlow-Townes linewidth of 83.45 Hz, far surpassing carrier phase noise. Our results showcase the effective integration of cavity-enhanced optical nonlinearities into on-chip mid-infrared photonics.

physics.optics↗

arXiv2024

A Terahertz Bandwidth Nonmagnetic Isolator

Integrated photonics could bring transformative breakthroughs in computing, networking, imaging, sensing, and quantum information processing, enabled by increasingly sophisticated optical functionalities on a photonic chip. However, wideband optical isolators, which are essential for the robust operation of practically all optical systems, have been challenging to realize in integrated form due to the incompatibility of magnetic media with these circuit technologies. Here, we present the first-ever demonstration of an integrated non-magnetic optical isolator with terahertz-level optical bandwidth. The system is comprised of two acousto-optic frequency-shifting beam splitters which create a non-reciprocal multimode interferometer exhibiting high-contrast, nonreciprocal light transmission. We dramatically enhance the isolation bandwidth of this system by precisely dispersion balancing the paths of the interferometer. Using this approach, we demonstrate integrated nonmagnetic isolators with an optical contrast as high as 28 dB, insertion losses as low as -2.16 dB, and optical bandwidths as high as 2 THz (16 nm). We also show that the center frequency and direction of optical isolation are rapidly reconfigurable by tuning the relative phase of the microwave signals used to drive the acousto-optic beam splitters. With their CMOS compatibility, wideband operation, low losses, and rapid reconfigurability, such integrated isolators could address a key barrier to the integration of a wide range of photonic functionalities on a chip. Looking beyond the current demonstration, this bandwidth-scalable approach to nonmagnetic isolation opens the door to ultrawideband (>10 THz) isolators, which are needed to shrink state-of-the-art imaging, sensing, and communications systems into photonic integrated circuits.

physics.optics↗

arXiv2023

Photonic chip-based low noise microwave oscillator

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

physics.optics↗

arXiv2023

Laser cooling of traveling wave phonons in an optical fiber

In recent years, optical control of mechanical oscillators has emerged as a critical tool for everything from information processing to laser cooling. While traditional forms of optomechanical cooling utilize systems comprised of discrete optical and mechanical modes, it has recently been shown that cooling can be achieved in a chip-based system that possesses a continuum of modes. Through Brillouin-mediated phonon-photon interactions, cooling of a band of traveling acoustic waves can occur when anti-Stokes scattered photons exit the system more rapidly than the relaxation rate of the mechanical waves -- to a degree determined by the acousto-optic coupling. Here, we demonstrate that a continuum of traveling wave phonons can be cooled within an optical fiber, extending this physics to macroscopic length scales. Leveraging the large acousto-optic coupling permitted within a liquid-core optical fiber, heterodyne spectroscopy reveals power-dependent changes in spontaneous Brillouin scattering spectra that indicate a reduction of the thermal phonon population by 21K using 120 mW of injected laser power.

physics.optics↗

arXiv2022

Acoustic radiation from a superconducting qubit: From spontaneous emission to Rabi oscillations

Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.

quant-ph↗

arXiv2022

Quantum optomechanics in tripartite systems

Owing to their long-lifetimes at cryogenic temperatures, mechanical oscillators are recognized as an attractive resource for quantum information science and as a testbed for fundamental physics. Key to these applications is the ability to prepare, manipulate and measure quantum states of mechanical motion. Through an exact formal solution to the Schrodinger equation, we show how tripartite optomechanical interactions, involving the mutual coupling between two distinct optical modes and an acoustic resonance enables quantum states of mechanical oscillators to be synthesized and interrogated.

quant-ph↗

arXiv2022

Micro-fabricated mirrors with finesse exceeding one million

The Fabry-Pérot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest finesse mirrors relies on centuries-old mechanical polishing techniques, which offer losses at the part-per-million (ppm) level. However, no existing fabrication techniques are able to produce high finesse resonators with the large range of mirror geometries needed for scalable quantum devices and next-generation compact atomic clocks. In this paper, we introduce a new and scalable approach to fabricate mirrors with ultrahigh finesse ($\geq 10^{6}$) and user-defined radius of curvature spanning four orders of magnitude ($10^{-4}-10^{0}$ m). We employ photoresist reflow and reactive ion etching to shape and transfer mirror templates onto a substrate while maintaining sub-Angstrom roughness. This substrate is coated with a dielectric stack and used to create arrays of compact Fabry-Pérot resonators with finesse values as high as 1.3 million and measured excess loss $<$ 1 ppm. Optical ringdown measurements of 43 devices across 5 substrates reveal that the fabricated cavity mirrors -- with both small and large radii of curvature -- produce an average coating-limited finesse of 1.05 million. This versatile new approach opens the door to scalable fabrication of high-finesse miniaturized Fabry-Pérot cavities needed for emerging quantum optics and frequency metrology technologies.

physics.optics↗

arXiv2022

Chip-Based Laser with 1 Hertz Integrated Linewidth

Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekeeping, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other hand, planar waveguide lasers and cavities exploit the benefits of CMOS scalability but are fundamentally limited from achieving hertz-level linewidths at longer times by stochastic noise and thermal sensitivity inherent to the waveguide medium. These physical limits have inhibited the development of compact laser systems with frequency noise required for portable optical clocks that have performance well beyond conventional microwave counterparts. In this work, we break this paradigm to demonstrate a compact, high-coherence laser system at 1548 nm with a 1 s integrated linewidth of 1.1 Hz and fractional frequency instability less than 10$^{-14}$ from 1 ms to 1 s. The frequency noise at 1 Hz offset is suppressed by 11 orders of magnitude from that of the free-running diode laser down to the cavity thermal noise limit near 1 Hz$^2$/Hz, decreasing to 10$^{-3}$ Hz$^2$/Hz at 4 kHz offset. This low noise performance leverages wafer-scale integrated lasers together with an 8 mL vacuum-gap cavity that employs micro-fabricated mirrors with sub-angstrom roughness to yield an optical $Q$ of 11.8 billion. Significantly, all the critical components are lithographically defined on planar substrates and hold the potential for parallel high-volume manufacturing. Consequently, this work provides an important advance towards compact lasers with hertz-level linewidths for applications such as portable optical clocks, low-noise RF photonic oscillators, and related communication and navigation systems.

physics.optics↗

arXiv2022

Electrical Control of Surface Acoustic Waves

Acoustic waves at microwave frequencies have been widely used in wireless communication and recently emerged as versatile information carriers in quantum applications. However, most acoustic devices are passive components, and dynamic control of acoustic waves in a low-loss and scalable manner remains an outstanding challenge, which hinders the development of phononic integrated circuits. Here we demonstrate electrical control of traveling acoustic waves on an integrated lithium niobate platform at both room and millikelvin temperatures. We modulate the phase and amplitude of the acoustic waves and demonstrate an acoustic frequency shifter by serrodyne phase modulation. Furthermore, we show reconfigurable nonreciprocal modulation by tailoring the phase matching between acoustic and quasi-traveling electric fields. Our scalable electro-acoustic platform comprises the fundamental elements for arbitrary acoustic signal processing and manipulation of phononic quantum information.

physics.app-ph↗

arXiv2021

Thermal and driven noise in Brillouin Lasers

Owing to their highly coherent emission and compact form factor, Brillouin lasers have been identified as a valuable asset for applications including portable atomic clocks, precision sensors, coherent microwave synthesis and energy-efficient approaches to coherent communications. While the fundamental emission linewidth of these lasers can be very narrow, noise within dielectric materials leads to drift in the carrier frequency, posing vexing challenges for applications requiring ultra-stable emission. A unified understanding of Brillouin laser performance may provide critical insights to reach new levels of frequency stability, however existing noise models focus on only one or a few key noise sources, and do not capture the thermo-optic drift in the laser frequency produced by thermal fluctuations or absorbed power. Here, we develop a coupled mode theory of Brillouin laser dynamics that accounts for dominant forms of noise in non-crystalline systems, capturing the salient features of the frequency and intensity noise for a variety of systems. As a result, theory and experiment can be directly compared to identify key sources of noise and the frequency bands they impact, revealing strategies to improve the performance of Brillouin lasers and pave the way for highly-coherent sources of light on a chip.

physics.optics↗

arXiv2021

Modulation of Brillouin optomechanical interactions via acoustoelectric phonon-electron coupling

Optomechanical Brillouin nonlinearities -- arising from the coupling between traveling photons and phonons -- have become the basis for a range of powerful optical signal processing and sensing technologies. The dynamics of such interactions are largely set and limited by the host material's elastic, optical, and photo-elastic properties, which are generally considered intrinsic and static. Here we show for the first time that it is feasible to dynamically reconfigure the Brillouin nonlinear susceptibility in transparent semiconductors through acoustoelectric phonon-electron coupling. Acoustoelectric interactions permit a wide range of tunability of the phonon dissipation rate and velocity, perhaps the most influential parameters in the Brillouin nonlinear susceptibility. We develop a Hamiltonian-based analysis that yields self-consistent dynamical equations and noise coupling, allowing us to explore the physics of such acoustoelectrically enhanced Brillouin (AEB) interactions and show that they give rise to a dramatic enhancement of the performance of Brillouin-based photonic technologies. Moreover, we show that these AEB effects can drive systems into new regimes of fully-coherent scattering that resemble the dynamics of optical parametric processes, dramatically different than the incoherent traditional Brillouin limit. We propose and computationally explore a particular semiconductor heterostructure in which the acoustoelectric interaction arises from a piezoelectric phonon-electron coupling. We find that this system provides the necessary piezoelectric and carrier response ($k^2\approx 6 \%$), favorable semiconductor materials properties, and large optomechanical confinement and coupling ($|g_0|\approx8000$ (rad/s)$\sqrt{\text{m}}$) sufficient to demonstrate these new AEB enhanced optomechanical interactions.

physics.optics↗