arXiv subjects

Peter Wittich

Publications and source records attributed to Peter Wittich.

At least 19 recordsLinked to original sources

arXiv2026

CURE-like, not cure-all: Varying broad relevance in experimentation labs produces similar student outcomes

Physics labs that engage students in practices authentic to experimental physics (experimentation-based labs) are being implemented to modernize the undergraduate physics curriculum and broaden participation in physics. Accordingly, prior research has positioned Course-Based Undergraduate Research Experiences (CUREs) as a means to extend the benefits of authentic undergraduate research experiences to more students. However, CUREs are resource-intensive and difficult to implement; a continuous stream of novel research projects adaptable for undergraduate courses is rare. Further, little is known about which specific components of a CURE are crucial to improving student outcomes and which components could be scaled back to improve feasibility for a wider range of class settings. In this study, we aim to isolate the component of broad relevance by running two experimentation-based labs in parallel: one "CURE-like" that increases broad relevance through the use of muon detectors, and one that uses equipment typical to an introductory physics lab and not relevant beyond the classroom. We measure student outcomes for both experimental critical thinking skills and attitudes towards physics labs. We use hierarchical linear modeling to compare student outcomes between the two labs. We find that both experimentation-based labs produce similar student outcomes. Our results suggest that increased levels of broad relevance may not inherently improve gains in student learning or attitudes. Future work should further investigate which components of different experimentation-based lab formats are associated with gains in student outcomes. Although this study did not implement a full CURE, our findings align with a growing body of evidence challenging the idea that CUREs are uniquely positioned to achieve superior student outcomes over other well-designed experimentation-based labs.

physics.ed-ph↗

arXiv2025

Design, Construction, and Testing of the APOLLO ATCA Blades for Use at the HL-LHC

The Apollo Advanced Telecommunications Computing Architecture (ATCA) platform is an open-source design consisting of a generic "Service Module" (SM) and a customizable "Command Module" (CM), allowing for cost-effective use in applications such as the readout of the inner tracker and the Level-1 track trigger for the CMS Phase-II upgrade at the HL-LHC. The SM integrates an intelligent IPMC, robust power entry and conditioning systems, a powerful system-on-module computer, and flexible clock and communication infrastructure. The CM is designed around two Xilinx Ultrascale+ FPGAs and high-density, high-bandwidth optical transceivers capable of 25 Gb/s. Crates of Apollo blades are currently being tested at Boston University, Cornell University, and CERN.

hep-ex↗

arXiv2024

Line Segment Tracking: Improving the Phase 2 CMS High Level Trigger Tracking with a Novel, Hardware-Agnostic Pattern Recognition Algorithm

Charged particle reconstruction is one the most computationally heavy components of the full event reconstruction of Large Hadron Collider (LHC) experiments. Looking to the future, projections for the High Luminosity LHC (HL-LHC) indicate a superlinear growth for required computing resources for single-threaded CPU algorithms that surpass the computing resources that are expected to be available. The combination of these facts creates the need for efficient and computationally performant pattern recognition algorithms that will be able to run in parallel and possibly on other hardware, such as GPUs, given that these become more and more available in LHC experiments and high-performance computing centres. Line Segment Tracking (LST) is a novel such algorithm which has been developed to be fully parallelizable and hardware agnostic. The latter is achieved through the usage of the Alpaka library. The LST algorithm has been tested with the CMS central software as an external package and has been used in the context of the CMS HL-LHC High Level Trigger (HLT). When employing LST for pattern recognition in the HLT tracking, the physics and timing performances are shown to improve with respect to the ones utilizing the current pattern recognition algorithms. The latest results on the usage of the LST algorithm within the CMS HL-LHC HLT are presented, along with prospects for further improvements of the algorithm and its CMS central software integration.

hep-ex↗

arXiv2024

Improving tracking algorithms with machine learning: a case for line-segment tracking at the High Luminosity LHC

In this work, we present a study on ways that tracking algorithms can be improved with machine learning (ML). We base this study on the line segment tracking (LST) algorithm that we have designed to be naturally parallelized and vectorized in order to efficiently run on modern processors. LST has been developed specifically for the CMS Experiment at the LHC, towards the High Luminosity LHC (HL-LHC) upgrade. Moreover, we have already shown excellent efficiency and performance results as we iteratively improve LST, leveraging a full simulation of the CMS detector. At the same time, promising deep-learning-based tracking algorithms, such as Graph Neural Networks (GNNs), are being pioneered on the simplified TrackML dataset. These results suggest that parts of LST could be improved or replaced by ML. Thus, a thorough, step-by-step investigation of exactly how and where ML can be utilized, while still meeting realistic HL-LHC performance and efficiency constraints, is implemented as follows. First, a lightweight neural network is used to replace and improve upon explicitly defined track quality selections. This neural network is shown to be highly efficient and robust to displaced tracks while having little-to-no impact on the runtime of LST. These results clearly establish that ML can be used to improve LST without penalty. Next, exploratory studies of GNN track-building algorithms are described. In particular, low-level track objects from LST are considered as nodes in a graph, where edges represent higher-level objects or even entire track candidates. Then, an edge-classifier GNN is trained, and the efficiency of the resultant edge scores is compared with that of the existing LST track quality selections. These GNN studies provide insights into the practicality and performance of using more ambitious and complex ML algorithms for HL-LHC tracking at the CMS Experiment.

physics.ins-det↗

arXiv2023

Generalizing mkFit and its Application to HL-LHC

mkFit is an implementation of the Kalman filter-based track reconstruction algorithm that exploits both thread- and data-level parallelism. In the past few years the project transitioned from the R&D phase to deployment in the Run-3 offline workflow of the CMS experiment. The CMS tracking performs a series of iterations, targeting reconstruction of tracks of increasing difficulty after removing hits associated to tracks found in previous iterations. mkFit has been adopted for several of the tracking iterations, which contribute to the majority of reconstructed tracks. When tested in the standard conditions for production jobs, speedups in track pattern recognition are on average of the order of 3.5x for the iterations where it is used (3-7x depending on the iteration). Multiple factors contribute to the observed speedups, including vectorization and a lightweight geometry description, as well as improved memory management and single precision. Efficient vectorization is achieved with both the icc and the gcc (default in CMSSW) compilers and relies on a dedicated library for small matrix operations, Matriplex, which has recently been released in a public repository. While the mkFit geometry description already featured levels of abstraction from the actual Phase-1 CMS tracker, several components of the implementations were still tied to that specific geometry. We have further generalized the geometry description and the configuration of the run-time parameters, in order to enable support for the Phase-2 upgraded tracker geometry for the HL-LHC and potentially other detector configurations. The implementation strategy and high-level code changes required for the HL-LHC geometry are presented. Speedups in track building from mkFit imply that track fitting becomes a comparably time consuming step of the tracking chain.

hep-ex↗

arXiv2023

Speeding up the CMS track reconstruction with a parallelized and vectorized Kalman-filter-based algorithm during the LHC Run 3

One of the most challenging computational problems in the Run 3 of the Large Hadron Collider (LHC) and more so in the High-Luminosity LHC (HL-LHC) is expected to be finding and fitting charged-particle tracks during event reconstruction. The methods used so far at the LHC and in particular at the CMS experiment are based on the Kalman filter technique. Such methods have shown to be robust and to provide good physics performance, both in the trigger and offline. In order to improve computational performance, we explored Kalman-filter-based methods for track finding and fitting, adapted for many-core SIMD architectures. This adapted Kalman-filter-based software, called "mkFit", was shown to provide a significant speedup compared to the traditional algorithm, thanks to its parallelized and vectorized implementation. The mkFit software was recently integrated into the offline CMS software framework, in view of its exploitation during the Run 3 of the LHC. At the start of the LHC Run 3, mkFit will be used for track finding in a subset of the CMS offline track reconstruction iterations, allowing for significant improvements over the existing framework in terms of computational performance, while retaining comparable physics performance. The performance of the CMS track reconstruction using mkFit at the start of the LHC Run 3 is presented, together with prospects of further improvement in the upcoming years of data taking.

hep-ex↗

arXiv2022

Line Segment Tracking in the HL-LHC

The major challenge posed by the high instantaneous luminosity in the High Luminosity LHC (HL-LHC) motivates efficient and fast reconstruction of charged particle tracks in a high pile-up environment. While there have been efforts to use modern techniques like vectorization to improve the existing classic Kalman Filter based reconstruction algorithms, Line Segment Tracking takes a fundamentally different approach by doing a bottom-up reconstruction of tracks. Small track stubs from adjoining detector regions are constructed, and then these track stubs that are consistent with typical track trajectories are successively linked. Since the production of these track stubs is localized, they can be made in parallel, which lends way into using architectures like GPUs and multi-CPUs to take advantage of the parallelism. The algorithm is implemented in the context of the CMS Phase-2 Tracker and runs on NVIDIA Tesla V100 GPUs. Good physics and timing performance has been obtained, and stepping stones for the future are elaborated.

physics.ins-det↗

arXiv2022

Segment Linking: A Highly Parallelizable Track Reconstruction Algorithm for HL-LHC

The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) will produce particle collisions with up to 200 simultaneous proton-proton interactions. These unprecedented conditions will create a combinatorial complexity for charged-particle track reconstruction that demands a computational cost that is expected to surpass the projected computing budget using conventional CPUs. Motivated by this and taking into account the prevalence of heterogeneous computing in cutting-edge High Performance Computing centers, we propose an efficient, fast and highly parallelizable bottom-up approach to track reconstruction for the HL-LHC, along with an associated implementation on GPUs, in the context of the Phase 2 CMS outer tracker. Our algorithm, called Segment Linking (or Line Segment Tracking), takes advantage of localized track stub creation, combining individual stubs to progressively form higher level objects that are subject to kinematical and geometrical requirements compatible with genuine physics tracks. The local nature of the algorithm makes it ideal for parallelization under the Single Instruction, Multiple Data paradigm, as hundreds of objects can be built simultaneously. The computing and physics performance of the algorithm has been tested on an NVIDIA Tesla V100 GPU, already yielding efficiency and timing measurements that are on par with the latest, multi-CPU versions of existing CMS tracking algorithms.

physics.ins-det↗

arXiv2021

Parallelizing the Unpacking and Clustering of Detector Data for Reconstruction of Charged Particle Tracks on Multi-core CPUs and Many-core GPUs

We present results from parallelizing the unpacking and clustering steps of the raw data from the silicon strip modules for reconstruction of charged particle tracks. Throughput is further improved by concurrently processing multiple events using nested OpenMP parallelism on CPU or CUDA streams on GPU. The new implementation along with earlier work in developing a parallelized and vectorized implementation of the combinatoric Kalman filter algorithm has enabled efficient global reconstruction of the entire event on modern computer architectures. We demonstrate the performance of the new implementation on Intel Xeon and NVIDIA GPU architectures.

hep-ex↗

arXiv2020

Speeding up Particle Track Reconstruction using a Parallel Kalman Filter Algorithm

One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is determining the trajectory of charged particles during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material effects and error estimation. Recognizing the need for faster computational throughput, we have adapted Kalman-filter-based methods for highly parallel, many-core SIMD architectures that are now prevalent in high-performance hardware. In this paper, we discuss the design and performance of the improved tracking algorithm, referred to as mkFit. A key piece of the algorithm is the Matriplex library, containing dedicated code to optimally vectorize operations on small matrices. The physics performance of the mkFit algorithm is comparable to the nominal CMS tracking algorithm when reconstructing tracks from simulated proton-proton collisions within the CMS detector. We study the scaling of the algorithm as a function of the parallel resources utilized and find large speedups both from vectorization and multi-threading. mkFit achieves a speedup of a factor of 6 compared to the nominal algorithm when run in a single-threaded application within the CMS software framework.

physics.ins-det↗

arXiv2020

Reconstruction of Charged Particle Tracks in Realistic Detector Geometry Using a Vectorized and Parallelized Kalman Filter Algorithm

One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is finding and fitting particle tracks during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material effects and error estimation. Recognizing the need for faster computational throughput, we have adapted Kalman-filter-based methods for highly parallel, many-core SIMD and SIMT architectures that are now prevalent in high-performance hardware. Previously we observed significant parallel speedups, with physics performance comparable to CMS standard tracking, on Intel Xeon, Intel Xeon Phi, and (to a limited extent) NVIDIA GPUs. While early tests were based on artificial events occurring inside an idealized barrel detector, we showed subsequently that our mkFit software builds tracks successfully from complex simulated events (including detector pileup) occurring inside a geometrically accurate representation of the CMS-2017 tracker. Here, we report on advances in both the computational and physics performance of mkFit, as well as progress toward integration with CMS production software. Recently we have improved the overall efficiency of the algorithm by preserving short track candidates at a relatively early stage rather than attempting to extend them over many layers. Moreover, mkFit formerly produced an excess of duplicate tracks; these are now explicitly removed in an additional processing step. We demonstrate that with these enhancements, mkFit becomes a suitable choice for the first iteration of CMS tracking, and eventually for later iterations as well. We plan to test this capability in the CMS High Level Trigger during Run 3 of the LHC, with an ultimate goal of using it in both the CMS HLT and offline reconstruction for the HL-LHC CMS tracker.

physics.ins-det↗

arXiv2019

Speeding up Particle Track Reconstruction in the CMS Detector using a Vectorized and Parallelized Kalman Filter Algorithm

Building particle tracks is the most computationally intense step of event reconstruction at the LHC. With the increased instantaneous luminosity and associated increase in pileup expected from the High-Luminosity LHC, the computational challenge of track finding and fitting requires novel solutions. The current track reconstruction algorithms used at the LHC are based on Kalman filter methods that achieve good physics performance. By adapting the Kalman filter techniques for use on many-core SIMD architectures such as the Intel Xeon and Intel Xeon Phi and (to a limited degree) NVIDIA GPUs, we are able to obtain significant speedups and comparable physics performance. New optimizations, including a dedicated post-processing step to remove duplicate tracks, have improved the algorithm's performance even further. Here we report on the current structure and performance of the code and future plans for the algorithm.

physics.ins-det↗

arXiv2019

Parallelized and Vectorized Tracking Using Kalman Filters with CMS Detector Geometry and Events

The High-Luminosity Large Hadron Collider at CERN will be characterized by greater pileup of events and higher occupancy, making the track reconstruction even more computationally demanding. Existing algorithms at the LHC are based on Kalman filter techniques with proven excellent physics performance under a variety of conditions. Starting in 2014, we have been developing Kalman-filter-based methods for track finding and fitting adapted for many-core SIMD processors that are becoming dominant in high-performance systems. This paper summarizes the latest extensions to our software that allow it to run on the realistic CMS-2017 tracker geometry using CMSSW-generated events, including pileup. The reconstructed tracks can be validated against either the CMSSW simulation that generated the hits, or the CMSSW reconstruction of the tracks. In general, the code's computational performance has continued to improve while the above capabilities were being added. We demonstrate that the present Kalman filter implementation is able to reconstruct events with comparable physics performance to CMSSW, while providing generally better computational performance. Further plans for advancing the software are discussed.

physics.comp-ph↗

arXiv2019

Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Architectures with the CMS Detector

In the High-Luminosity Large Hadron Collider (HL-LHC), one of the most challenging computational problems is expected to be finding and fitting charged-particle tracks during event reconstruction. The methods currently in use at the LHC are based on the Kalman filter. Such methods have shown to be robust and to provide good physics performance, both in the trigger and offline. In order to improve computational performance, we explored Kalman-filter-based methods for track finding and fitting, adapted for many-core SIMD and SIMT architectures. Our adapted Kalman-filter-based software has obtained significant parallel speedups using such processors, e.g., Intel Xeon Phi, Intel Xeon SP (Scalable Processors) and (to a limited degree) NVIDIA GPUs. Recently, an effort has started towards the integration of our software into the CMS software framework, in view of its exploitation for the Run III of the LHC. Prior reports have shown that our software allows in fact for some significant improvements over the existing framework in terms of computational performance with comparable physics performance, even when applied to realistic detector configurations and event complexity. Here, we demonstrate that in such conditions physics performance can be further improved with respect to our prior reports, while retaining the improvements in computational performance, by making use of the knowledge of the detector and its geometry.

physics.ins-det↗

arXiv2018

Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Architectures

Faced with physical and energy density limitations on clock speed, contemporary microprocessor designers have increasingly turned to on-chip parallelism for performance gains. Algorithms should accordingly be designed with ample amounts of fine-grained parallelism if they are to realize the full performance of the hardware. This requirement can be challenging for algorithms that are naturally expressed as a sequence of small-matrix operations, such as the Kalman filter methods widely in use in high-energy physics experiments. In the High-Luminosity Large Hadron Collider (HL-LHC), for example, one of the dominant computational problems is expected to be finding and fitting charged-particle tracks during event reconstruction; today, the most common track-finding methods are those based on the Kalman filter. Experience at the LHC, both in the trigger and offline, has shown that these methods are robust and provide high physics performance. Previously we reported the significant parallel speedups that resulted from our efforts to adapt Kalman-filter-based tracking to many-core architectures such as Intel Xeon Phi. Here we report on how effectively those techniques can be applied to more realistic detector configurations and event complexity.

physics.comp-ph↗

arXiv2017

Kalman filter tracking on parallel architectures

Limits on power dissipation have pushed CPUs to grow in parallel processing capabilities rather than clock rate, leading to the rise of "manycore" or GPU-like processors. In order to achieve the best performance, applications must be able to take full advantage of vector units across multiple cores, or some analogous arrangement on an accelerator card. Such parallel performance is becoming a critical requirement for methods to reconstruct the tracks of charged particles at the Large Hadron Collider and, in the future, at the High Luminosity LHC. This is because the steady increase in luminosity is causing an exponential growth in the overall event reconstruction time, and tracking is by far the most demanding task for both online and offline processing. Many past and present collider experiments adopted Kalman filter-based algorithms for tracking because of their robustness and their excellent physics performance, especially for solid state detectors where material interactions play a significant role. We report on the progress of our studies towards a Kalman filter track reconstruction algorithm with optimal performance on manycore architectures. The combinatorial structure of these algorithms is not immediately compatible with an efficient SIMD (or SIMT) implementation; the challenge for us is to recast the existing software so it can readily generate hundreds of shared-memory threads that exploit the underlying instruction set of modern processors. We show how the data and associated tasks can be organized in a way that is conducive to both multithreading and vectorization. We demonstrate very good performance on Intel Xeon and Xeon Phi architectures, as well as promising first results on Nvidia GPUs.

physics.ins-det↗

arXiv2017

FPGA-Based Tracklet Approach to Level-1 Track Finding at CMS for the HL-LHC

During the High Luminosity LHC, the CMS detector will need charged particle tracking at the hardware trigger level to maintain a manageable trigger rate and achieve its physics goals. The tracklet approach is a track-finding algorithm based on a road-search algorithm that has been implemented on commercially available FPGA technology. The tracklet algorithm has achieved high performance in track-finding and completes tracking within 3.4 $μ$s on a Xilinx Virtex-7 FPGA. An overview of the algorithm and its implementation on an FPGA is given, results are shown from a demonstrator test stand and system performance studies are presented.

physics.ins-det↗

arXiv2017

Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Processors and GPUs

For over a decade now, physical and energy constraints have limited clock speed improvements in commodity microprocessors. Instead, chipmakers have been pushed into producing lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. Broad-based efforts from manufacturers and developers have been devoted to making these processors user-friendly enough to perform general computations. However, extracting performance from a larger number of cores, as well as specialized vector or SIMD units, requires special care in algorithm design and code optimization. One of the most computationally challenging problems in high-energy particle experiments is finding and fitting the charged-particle tracks during event reconstruction. This is expected to become by far the dominant problem in the High-Luminosity Large Hadron Collider (HL-LHC), for example. Today the most common track finding methods are those based on the Kalman filter. Experience with Kalman techniques on real tracking detector systems has shown that they are robust and provide high physics performance. This is why they are currently in use at the LHC, both in the trigger and offline. Previously we reported on the significant parallel speedups that resulted from our investigations to adapt Kalman filters to track fitting and track building on Intel Xeon and Xeon Phi. Here, we discuss our progresses toward the understanding of these processors and the new developments to port Kalman filter to NVIDIA GPUs.

physics.comp-ph↗