Searcharxiv⌕ Search

arXiv subjects

Ph. Gris

Publications and source records attributed to Ph. Gris.

7 recordsLinked to original sources
arXiv2023

Laser calibration of the ATLAS Tile Calorimeter during LHC Run 2

This article reports the laser calibration of the hadronic Tile Calorimeter of the ATLAS experiment in the LHC Run 2 data campaign. The upgraded Laser II calibration system is described. The system was commissioned during the first LHC Long Shutdown, exhibiting a stability better than 0.8% for the laser light monitoring. The methods employed to derive the detector calibration factors with data from the laser calibration runs are also detailed. These allowed to correct for the response fluctuations of the 9852 photomultiplier tubes of the Tile Calorimeter with a total uncertainty of 0.5% plus a luminosity-dependent sub-dominant term. Finally, we report the regular monitoring and performance studies using laser events in both standalone runs and during proton collisions. These studies include channel timing and quality inspection, and photomultiplier linearity and response dependence on anode current.

physics.ins-det↗
arXiv2021

SNIa-Cosmology Analysis Results from Simulated LSST Images: from Difference Imaging to Constraints on Dark Energy

The Vera Rubin Observatory Legacy Survey of Space and Time (LSST) is expected to process ${\sim}10^6$ transient detections per night. For precision measurements of cosmological parameters and rates, it is critical to understand the detection efficiency, magnitude limits, artifact contamination levels, and biases in the selection and photometry. Here we rigorously test the LSST Difference Image Analysis (DIA) pipeline using simulated images from the Rubin Observatory LSST Dark Energy Science Collaboration (DESC) Data Challenge (DC2) simulation for the Wide-Fast-Deep (WFD) survey area. DC2 is the first large-scale (300 deg$^2$) image simulation of a transient survey that includes realistic cadence, variable observing conditions, and CCD image artifacts. We analyze ${\sim}$15 deg$^2$ of DC2 over a 5-year time-span in which artificial point-sources from Type Ia Supernovae (SNIa) light curves have been overlaid onto the images. We measure the detection efficiency as a function of Signal-to-Noise Ratio (SNR) and find a $50\%$ efficiency at $\rm{SNR}=5.8$. The magnitude limits for each filter are: $u=23.66$, $g=24.69$, $r=24.06$, $i=23.45$, $z=22.54$, $y=21.62$ $\rm{mag}$. The artifact contamination is $\sim90\%$ of detections, corresponding to $\sim1000$ artifacts/deg$^2$ in $g$ band, and falling to 300 per deg$^2$ in $y$ band. The photometry has biases $<1\%$ for magnitudes $19.5 < m <23$. Our DIA performance on simulated images is similar to that of the Dark Energy Survey pipeline applied to real images. We also characterize DC2 image properties to produce catalog-level simulations needed for distance bias corrections. We find good agreement between DC2 data and simulations for distributions of SNR, redshift, and fitted light-curve properties. Applying a realistic SNIa-cosmology analysis for redshifts $z<1$, we recover the input cosmology parameters to within statistical uncertainties.

astro-ph.CO↗
arXiv2021

Synergies between Vera C. Rubin Observatory, Nancy Grace Roman Space Telescope, and Euclid Mission: Constraining Dark Energy with Type Ia Supernovae

We review the needs of the supernova community for improvements in survey coordination and data sharing that would significantly boost the constraints on dark energy using samples of Type Ia supernovae from the Vera C. Rubin Observatories, the \textit{Nancy Grace Roman Space Telescope}, and the \textit{Euclid} Mission. We discuss improvements to both statistical and systematic precision that the combination of observations from these experiments will enable. For example, coordination will result in improved photometric calibration, redshift measurements, as well as supernova distances. We also discuss what teams and plans should be put in place now to start preparing for these combined data sets. Specifically, we request coordinated efforts in field selection and survey operations, photometric calibration, spectroscopic follow-up, pixel-level processing, and computing. These efforts will benefit not only experiments with Type Ia supernovae, but all time-domain studies, and cosmology with multi-messenger astrophysics.

astro-ph.CO↗
arXiv2020

Peculiar velocity cosmology with type Ia supernovae

Type Ia Supernovae have yet again the opportunity to revolutionize the field of cosmology as the new generation of surveys are acquiring thousands of nearby SNeIa opening a new era in cosmology: the direct measurement of the growth of structure parametrized by $fD$. This method is based on the SNeIa peculiar velocities derived from the residual to the Hubble law as direct tracers of the full gravitational potential caused by large scale structure. With this technique, we could probe not only the properties of dark energy, but also the laws of gravity. In this paper we present the analytical framework and forecasts. We show that ZTF and LSST will be able to reach 5\% precision on $fD$ by 2027. Our analysis is not significantly sensitive to photo-typing, but known selection functions and spectroscopic redshifts are mandatory. We finally introduce an idea of a dedicated spectrograph that would get all the required information in addition to boost the efficiency to each SNeIa so that we could reach the 5\% precision within the first two years of LSST operation and the few percent level by the end of the survey.

astro-ph.CO↗
arXiv2008

Design and Electronics Commissioning of the Physics Prototype of a Si-W Electromagnetic Calorimeter for the International Linear Collider

The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter, the current baseline choice is a high granularity sampling calorimeter with tungsten as absorber and silicon detectors as sensitive material. A ``physics prototype'' has been constructed, consisting of thirty sensitive layers. Each layer has an active area of 18x18 cm2 and a pad size of 1x1 cm2. The absorber thickness totals 24 radiation lengths. It has been exposed in 2006 and 2007 to electron and hadron beams at the DESY and CERN beam test facilities, using a wide range of beam energies and incidence angles. In this paper, the prototype and the data acquisition chain are described and a summary of the data taken in the 2006 beam tests is presented. The methods used to subtract the pedestals and calibrate the detector are detailed. The signal-over-noise ratio has been measured at 7.63 +/- 0.01. Some electronics features have been observed; these lead to coherent noise and crosstalk between pads, and also crosstalk between sensitive and passive areas. The performance achieved in terms of uniformity and stability is presented.

physics.ins-det↗
arXiv2006

Les Houches "Physics at TeV Colliders 2005'' Beyond the Standard Model working group: summary report

The work contained herein constitutes a report of the "Beyond the Standard Model'' working group for the Workshop "Physics at TeV Colliders", Les Houches, France, 2-20 May, 2005. We present reviews of current topics as well as original research carried out for the workshop. Supersymmetric and non-supersymmetric models are studied, as well as computational tools designed in order to facilitate their phenomenology.

hep-ph↗