arXiv subjects

Phaedon Avouris

Publications and source records attributed to Phaedon Avouris.

At least 19 recordsLinked to original sources

arXiv2026

Enhanced enantiomer discrimination with chiral surface plasmons

Strong light-matter coupling in chiral cavities has been proposed as an effective way to selectively interact with an enantiomer that shares the same handedness as the cavity's chiral mode. We show that surface plasmons supported by a two-dimensional interface with both electric and chiral conductivities discriminate enantiomers more efficiently than chiral optical cavities. A quantum-electrodynamic treatment is developed to incorporate the molecule's electric and magnetic dipole moments. We show that the discrimination factor for a chiral plasmon can exceed that of the best chiral-mirror cavity by almost an order of magnitude due to stronger field confinement. In addition, surface plasmons couple to a dipole's projection onto an entire plane, whereas cavity (or free-space) modes couple only to a single polarization axis. This geometric difference produces a $\sqrt{2}$ orientation-averaged boost in chiral discrimination for chiral surface platforms. A handedness-preserving reflector further amplifies the enhancement, opening a practical route towards chiral sensing using twisted-layer platforms.

physics.optics↗

arXiv2025

Generalized energy band alignment model for van der Waals heterostructures with a charge spillage dipole

The energy band alignment at the interface of van der Waals heterostructures (vdWHs) is a key design parameter for next-generation electronic and optoelectronic devices. Although the Anderson and midgap models have been widely adopted for bulk semiconductor heterostructures, they exhibit severe limitations when applied to vdWHs, particularly for type-III systems. Based on first-principles calculations for approximately $10^3$ vdWHs, we demonstrate these traditional models miss a critical dipole arising from interlayer charge spillage. We introduce a generalized linear response (gLR) model that includes this dipole through a quantum capacitance term while remaining analytically compact. With only two readily computed inputs, the charge neutrality level offset and the sum of the isolated-layer bandgaps, the gLR reproduces DFT band line-ups with $r^2\sim$0.9 across type-I, II, and III stacks. Machine-learning feature analysis confirms that these two descriptors dominate the underlying physics, indicating the model is near-minimal and broadly transferable. The gLR framework therefore provides both mechanistic insight and a fast, accurate surrogate for high-throughput screening of the vast vdW heterostructure design space.

cond-mat.mtrl-sci↗

arXiv2023

Twisted two-dimensional material stacks for polarization optics

The ability to control light polarization state is critically important for diverse applications in information processing, telecommunications, and spectroscopy. Here, we propose that a stack of anisotropic van der Waals materials can facilitate the building of optical elements with Jones matrices of unitary, Hermitian, non-normal, singular, degenerate, and defective classes. We show that the twisted stack with electrostatic control can function as arbitrary-birefringent wave-plate or arbitrary polarizer with tunable degree of non-normality, which in turn give access to plethora of polarization transformers including rotators, pseudorotators, symmetric and ambidextrous polarizers. Moreover, we discuss an electrostatic-reconfigurable stack which can be tuned to operate as four different polarizers and be used for Stokes polarimetry.

physics.optics↗

arXiv2020

Toward Monoatomic-Layer Field Confinement Limit via Acoustic Graphene Plasmons

Vertical plasmonic coupling in double-layer graphene leads to two hybridized plasmonic modes: optical and acoustic plasmons with symmetric and anti-symmetric charge distributions across the interlayer gap, respectively. However, in most experiments based on far-field excitation, only the optical plasmons are dominantly excited in the double-layer graphene systems. Here, we propose strategies to selectively and efficiently excite acoustic plasmons with a single or multiple nano-emitters. The analytical model developed here elucidates the role of the position and arrangement of the emitters on the symmetry of the resulting graphene plasmons. We present an optimal device structure to enable experimental observation of acoustic plasmons in double-layer graphene toward the ultimate level of plasmonic confinement defined by a monoatomic spacer, which is inaccesible with a graphene-on-a-mirror architecture.

cond-mat.mes-hall↗

arXiv2020

Graphene plasmon-phonon coupled modes at the exceptional point

Properties of graphene plasmons are greatly affected by their coupling to phonons. While such coupling has been routinely observed in both near-field and far-field graphene spectroscopy, the interplay between coupling strength and mode losses, and its exceptional point physics has not been discussed. By applying a non-Hermitian framework, we identify the transition point between strong and weak coupling as the exceptional point. Enhanced sensitivity to perturbations near the exceptional point is observed by varying the coupling strength and through gate modulation of the graphene Fermi level. Finally, we also show that the transition from strong to weak coupling is observable by changing the incident angle of radiation.

cond-mat.mes-hall↗

arXiv2020

Image polaritons in boron nitride for extreme polariton confinement with low losses

Polaritons in two-dimensional materials provide extreme light confinement that is difficult to achieve with metal plasmonics. However, such tight confinement inevitably increases optical losses through various damping channels. Here we demonstrate that hyperbolic phonon polaritons in hexagonal boron nitride can overcome this fundamental trade-off. Among two observed polariton modes, featuring a symmetric and antisymmetric charge distribution, the latter exhibits lower optical losses and tighter polariton confinement. Far-field excitation and detection of this high-momenta mode becomes possible with our resonator design that can boost the coupling efficiency via virtual polariton modes with image charges that we dub image polaritons. Using these image polaritons, we experimentally observe a record-high effective index of up to 132 and quality factors as high as 501. Further, our phenomenological theory suggests an important role of hyperbolic surface scattering in the damping process of hyperbolic phonon polaritons.

physics.optics↗

arXiv2019

Plasmonic-based gas sensing with graphene nanoribbons

The main challenge to exploiting plasmons for gas vibrational mode sensing is the extremely weak infrared absorption of gas species. In this work, we explore the possibility of trapping free gas molecules via surface adsorption, optical, or electrostatic fields to enhance gas-plasmon interactions and to increase plasmon sensing ability. We discuss the relative strengths of these trapping forces and found gas adsorption in a typical nanoribbon array plasmonic setup produces measurable dips in optical extinction of magnitude 0.1 % for gas concentration of about parts per thousand level.

cond-mat.mes-hall↗

arXiv2018

Intrinsically ultrastrong plasmon-exciton interactions in crystallized films of carbon nanotubes

In cavity quantum electrodynamics, optical emitters that are strongly coupled to cavities give rise to polaritons with characteristics of both the emitters and the cavity excitations. We show that carbon nanotubes can be crystallized into chip-scale, two-dimensionally ordered films and that this new material enables intrinsically ultrastrong emitter-cavity interactions: rather than interacting with external cavities, nanotube excitons couple to the near-infrared plasmon resonances of the nanotubes themselves. Our polycrystalline nanotube films have a hexagonal crystal structure, ~25 nm domains, and a 1.74 nm lattice constant. With this extremely high nanotube density and nearly ideal plasmon-exciton spatial overlap, plasmon-exciton coupling strengths reach 0.5 eV, which is 75% of the bare exciton energy and a near record for room-temperature ultrastrong coupling. Crystallized nanotube films represent a milestone in nanomaterials assembly and provide a compelling foundation for high-ampacity conductors, low-power optical switches, and tunable optical antennas.

cond-mat.mes-hall↗

arXiv2018

Graphene-enabled, directed nanomaterial placement from solution for large-scale device integration

Controlled placement of nanomaterials at predefined locations with nanoscale precision remains among the most challenging problems that inhibit their large-scale integration in the field of semiconductor process technology. Methods based on surface functionalization have a drawback where undesired chemical modifications can occur and deteriorate the deposited material. The application of electric-field assisted placement techniques eliminates the element of chemical treatment; however, it requires an incorporation of conductive placement electrodes that limit the performance, scaling, and density of integrated electronic devices. Here, we report a method for electric-field assisted placement of solution-processed nanomaterials by using large-scale graphene layers featuring nanoscale deposition sites. The structured graphene layers are prepared via either transfer or synthesis on standard substrates, then are removed without residue once nanomaterial deposition is completed, yielding material assemblies with nanoscale resolution that cover surface areas larger than 1mm2. In order to demonstrate the broad applicability, we have assembled representative zero-, one-, and two-dimensional semiconductors at predefined substrate locations and integrated them into nanoelectronic devices. This graphene-based placement technique affords nanoscale resolution at wafer scale, and could enable mass manufacturing of nanoelectronics and optoelectronics involving a wide range of nanomaterials prepared via solution-based approaches.

physics.app-ph↗

arXiv2017

Tunable Graphene Metasurface Reflectarray for Cloaking, Illusion and Focusing

We present a graphene-based metasurface that can be actively tuned between different regimes of operation, such as anomalous beam steering and focusing, cloaking and illusion optics, by applying electrostatic gating without modifying the geometry of the metasurface. The metasurface is designed by placing graphene nano-ribbons (GNRs) on a dielectric cavity resonator, where interplay between geometric plasmon resonances in the ribbons and Fabry-Perot resonances in the cavity is used to achieve 2$π$ phase shift. As a proof of the concept, we demonstrate that wavefront of the field reflected from a triangular bump covered by the metasurface can be tuned by applying electric bias so as to resemble that of bare plane and of a spherical object. Moreover, reflective focusing and change of the reflection direction for the above-mentioned cases are also shown.

physics.optics↗

arXiv2017

Polaritons in layered 2D materials

In recent years, enhanced light-matter interactions through a plethora of dipole-type polaritonic excitations have been observed in two-dimensional (2D) layered materials. In graphene, electrically tunable and highly confined plasmon-polaritons were predicted and observed, opening up opportunities for optoelectronics, bio-sensing and other mid-infrared applications. In hexagonal boron nitride (hBN), low-loss infrared-active phonon-polaritons exhibit hyperbolic behavior for some frequencies, allowing for ray-like propagation exhibiting high quality factors and hyperlensing effects. In transition metal dichalcogenides (TMDs), reduced screening in the 2D limit leads to optically prominent excitons with large binding energy, with these polaritonic modes having been recently observed with scanning near field optical microscopy (SNOM). Here, we review recent progress in state-of-the-art experiments, survey the vast library of polaritonic modes in 2D materials, their optical spectral properties, figures-of-merit and application space. Taken together, the emerging field of 2D material polaritonics and their hybrids provide enticing avenues for manipulating light-matter interactions across the visible, infrared to terahertz spectral ranges, with new optical control beyond what can be achieved using traditional bulk materials.

cond-mat.mes-hall↗

arXiv2017

Strong and broadly tunable plasmon resonances in thick films of aligned carbon nanotubes

Low-dimensional plasmonic materials can function as high quality terahertz and infrared antennas at deep subwavelength scales. Despite these antennas' strong coupling to electromagnetic fields, there is a pressing need to further strengthen their absorption. We address this problem by fabricating thick films of aligned, uniformly sized carbon nanotubes and showing that their plasmon resonances are strong, narrow, and broadly tunable. With thicknesses ranging from 25 to 250 nm, our films exhibit peak attenuation reaching 70%, quality factors reaching 9, and electrostatically tunable peak frequencies by a factor of 2.3x. Excellent nanotube alignment leads to the attenuation being 99% linearly polarized along the nanotube axis. Increasing the film thickness blueshifts the plasmon resonators down to peak wavelengths as low as 1.4 micrometers, promoting them to a new near-infrared regime in which they can both overlap the S11 nanotube exciton energy and access the technologically important infrared telecom band.

physics.optics↗

arXiv2017

Coherent plasmon and phonon-plasmon resonances in carbon nanotubes

Carbon nanotubes provide a rare access point into the plasmon physics of one-dimensional electronic systems. By assembling purified nanotubes into uniformly sized arrays, we show that they support coherent plasmon resonances, that these plasmons enhance and hybridize with phonons, and that the phonon-plasmon resonances have quality factors as high as 10. Because coherent nanotube plasmonics can strengthen light-matter interactions, it provides a compelling platform for surface-enhanced infrared spectroscopy and tunable, high-performance optical devices at the nanometer scale.

physics.optics↗

arXiv2015

Plasmon coupling in extended structures: Graphene superlattice nanoribbon arrays

Interactions between localized plasmons in proximal nanostructures is a well-studied phenomenon. Here we explore plasmon plasmon interactions in connected extended systems. Such systems can now be easily produced using graphene. Specifically we employ the finite element method to study such interactions in graphene nanoribbon arrays with a periodically modulated electrochemical potential or number of layers. We find a rich variation in the resulting plasmonic resonances depending on the dimensions and the electrochemical potentials (doping) of the nanoribbon segments and the involvement of transverse and longitudinal plasmon interactions. Unlike predictions based of the well-known "orbital hybridization model", the energies of the resulting hybrid plasmonic resonances of the extended system can lie between the energies of the plasmons of the individual components. The results demonstrate the wide range tunability of the graphene plasmons and can help to design structures with desired spectra, which can be used to enhance optical fields in the infrared region of the electromagnetic spectrum.

cond-mat.mes-hall↗

arXiv2015

Power dissipation and electrical breakdown in black phosphorus

We report operating temperatures and heating coefficients measured in a multi-layer black phosphorus device as a function of injected electrical power. By combining micro-Raman spectroscopy and electrical transport measurements, we have observed a linear temperature increase up to 600K at a power dissipation rate of 0.896Kμm^3/mW. By further increasing the bias voltage, we determined the threshold power and temperature for electrical breakdown and analyzed the fracture in the black phosphorus layer that caused the device failure by means of scanning electron microscopy and atomic force microscopy. The results will benefit the research and development of electronics and optoelectronics based on novel two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2015

Tunable light-matter interaction and the role of hyperbolicity in graphene-hBN system

Hexagonal boron nitride (hBN) is a natural hyperbolic material which can also accommodate highly dispersive surface phonon-polariton modes. In this paper, we examine theoretically the mid-infrared optical properties of graphene-hBN heterostructures derived from their coupled plasmon-phonon modes. We found that the graphene plasmon couples differently with the phonons of the two Reststrahlen bands, owing to their different hyperbolicity. This also leads to distinctively different interaction between an external quantum emitter and the plasmon-phonon modes in the two bands, leading to substantial modification of its spectrum. The coupling to graphene plasmons allows for additional gate tunability in the Purcell factor, and narrow dips in its emission spectra.

physics.optics↗

arXiv2014

A black phosphorus photo-detector for multispectral, high-resolution imaging

Black phosphorus is a layered semiconductor that is intensely researched in view of applications in optoelectronics. In this Letter, we investigate a multi-layer black phosphorus photo-detector that is capable of acquiring high-contrast (V>0.9) images both in the visible (λ_{VIS}=532nm) as well as in the infrared (λ_{IR}=1550nm) spectral regime. In a first step, by using photocurrent microscopy, we map the active area of the device and we characterize responsivity and gain. In a second step, by deploying the black phosphorus device as a point-like detector in a confocal microsope setup, we acquire diffraction-limited optical images with sub-micron resolution. The results demonstrate the usefulness of black phosphorus as an optoelectronic material for hyperspectral imaging applications.

cond-mat.mtrl-sci↗

arXiv2014

Substrate Sensitive Mid-Infrared Photoresponse in Graphene

We report mid-infrared photocurrent spectra of graphene nanoribbon arrays on SiO2 dielectrics showing dual signatures of the substrate interaction. First, hybrid polaritonic modes of graphene plasmons and dielectric surface polar phonons produce a thermal photocurrent in graphene with spectral features that are tunable by gate voltage, nanoribbon width, and light polarization. Secondly, phonon-polaritons associated with the substrate are excited, which indirectly heat up the graphene leading to a graphene photocurrent with fixed spectral features. Models for other commonly used substrates show that the responsivity of graphene infrared photodetectors can be tailored to specific mid-IR frequency bands by the choice of the substrate.

cond-mat.mtrl-sci↗