arXiv subjects

Philip Hinz

Publications and source records attributed to Philip Hinz.

At least 19 recordsLinked to original sources

arXiv2026

Facility integration of the NASA IRTF adaptive secondary mirror

IRTF-ASM-1 has been functioning well since its first light in 2024. This adaptive secondary mirror (ASM) was primarily developed to be an on-sky demonstration of the new hybrid variable reluctance actuator technology at the NASA Infrared Telescope Facility (IRTF). However, due to its physical robustness and our previous demonstrations of sensitivity enhancements with the ASM, we are interested in using it to optimize telescope image quality on a nightly basis. This will directly benefit science observations. However, as IRTF does not currently have adaptive optics expertise, we have been developing the system to be used with minimal human intervention. We present our progress in developing software for active optics mode with IRTF-ASM-1 using the single conjugate, facility 2x2 Shack-Hartmann wavefront sensor Felix. We also present techniques for removing low-order, large amplitude non-common path aberrations between Felix and our science instruments.

astro-ph.IM↗

arXiv2026

Progress report on the integration of the IRTF adaptive secondary mirror

IRTF-ASM-1 is the first on-sky adaptive secondary mirror using the hybrid variable reluctance (HVR) actuators developed by the Netherlands Organization for Applied Scientific Research (TNO). Since its first light in April 2024, the ASM has continued to work consistently well with no hardware issues. The primary purpose of IRTF-ASM-1 is to serve as a demonstration of the HVR actuator technology, both in terms of verifying its robustness and testing calibration methods that are relevant to larger ASMs. However, as the ASM has proven to be easy to handle and reliable in its performance, we are moving toward integrating the ASM for long-term use at IRTF. We present closed loop results with the ASM and IRTF's off-axis facility wavefront sensor FELIX. Correcting the first seven Zernike modes through coma at 90-180 Hz, we are able to enhance the seeing by a factor of 1.8 in FWHM under 0."5 seeing conditions. We also performed the first science observations with the ASM in "static" mode and demonstrated that we can improve the throughput of IRTF's slit spectrograph by approximately a factor of 2, although this requires good reference slopes in FELIX. In the near future, we plan to optimize the calibration of reference slopes in FELIX and streamline the software so that the system can be operated by a non-AO expert.

astro-ph.IM↗

arXiv2026

Experimentally-determined performance limits for joint imaging and wavefront sensing with a photonic lantern

The photonic lantern (PL) is a focal-plane wavefront sensor (WFS) that can be used for second-stage control of extreme adaptive optics (AO) systems. While the number of sensed modes and the dynamic range with respect to each mode have been relatively well characterized, little attention has been paid to the PL's sensitivity, i.e. how measurement noise impacts the accuracy of PL wavefront reconstruction. We compute the PL's sensitivity to photon noise as a function of spatial frequency, and compare it to existing WFSs, using simulations as well as experiments on the muirSEAL testbed. We further assess these metrics in the case where only a subset of PL ports are available for wavefront sensing. In this configuration, the remaining ports are used to spatially and spectrally reconstruct the observed scene using algorithms such as SPADE. Using more ports for wavefront sensing enables greater aberration sensitivity but leaves less spatial information for image reconstruction. This allows us to trade off between fewer samples with smaller aberrations and more samples with larger aberrations. This work sets the stage for AO system design incorporating the PL as a joint WFS and imager.

astro-ph.IM↗

arXiv2025

On-sky demonstration of second-stage wavefront control with a photonic lantern

Ground-based direct imaging of exoplanets at high contrast requires precise correction of atmospheric turbulence using adaptive optics (AO). The planet-to-star contrast ratio at small angular separations from the host star is often limited by non-common-path aberrations (NCPAs) seen only in the science plane. The photonic lantern (PL) can be used to sense aberrations at the final science imaging plane. This enables a two-stage wavefront control architecture, in which the first-stage wavefront sensor senses atmospheric turbulence and the PL senses NCPAs and other aberrations not seen by the first stage. We demonstrate closed-loop control of residual wavefront errors using a non-dispersed PL after first-stage AO correction on the Shane 3m telescope at Lick Observatory. Our results show that non-dispersed PLs can be used for second-stage wavefront sensing, enabling performance improvements via minimally invasive retrofits to existing AO systems.

astro-ph.IM↗

arXiv2025

Performance Simulations for Kola: Achieving High-Resolution, Visible-Light AO Correction Over a 1 Arcminute Field

We present performance simulations for a proposed visible-light, multi-conjugate adaptive optics system for the 10-meter W. M. Keck I telescope that aims to deliver near diffraction-limited angular resolution at optical wavelengths. Our proposed architecture, the Keck Optical Laser Guide Star Adaptive Optics System (KOLA), combines multiple laser guide stars (LGS) and deformable mirrors to enable wide-field correction across a 60 arcsecond field of view. Simulations were conducted using the open-source Multi-Threaded Adaptive Optics Simulator (MAOS), which we validated against on-sky data for the current Keck I adaptive optics system. We evaluated KOLA performance across a range of design parameters and report key point spread function metrics, including Strehl ratio, full width at half maximum, and encircled energy radius. Example science-driven requirements include resolving black hole spheres of influence, probing crowded stellar fields, and imaging protoplanetary disks. Trade studies on actuator count and laser guide star configuration help inform future design decisions. We present a nominal KOLA design (10 LGS, 3 tip-tilt natural guide stars (TTNGS), and 3600 actuators on the adaptive secondary mirror). Performance simulations show a 15 mas angular resolution with a Strehl ratio of 34% at 652 nm on-axis. More work is needed to explore alternative LGS/TTNGS asterisms, optimize conjugation heights for high-altitude deformable mirrors, and test performance under poorer seeing conditions.

astro-ph.IM↗

arXiv2025

An on-sky investigation into factors limiting the performance of Keck-NIRC2 for conducting infrared high-contrast imaging

The most common instrument used by the exoplanet/brown dwarf direct imaging community at the W.M. Keck Observatory is currently the NIRC2 near-infrared imager. We performed on-sky testing to investigate three effects which may be limiting the performance of NIRC2 when conducting high-contrast imaging observations from $3-5μ$m. First, we report the measurements of an on-sky test of the throughput of the L/M vector vortex coronagraph. We quantify the throughput and additional background flux penalties, noting that the performance effects of using the vector vortex coronagraph in the Ms-filter are greater than in the Lp-filter. Second, we utilize the recently commissioned NIRC2 electronics upgrade to measure the sky variability at sub-second speeds. We find that the background varies at timescales of less than 30s, indicating that the electronics upgrade may open an opportunity to improve the sky-background subtraction of future surveys. Third, we document the contribution of the image derotator to the spatial non-uniformity in the background flux. We conclude by giving a set of recommendations of how the Keck-NIRC2 high-contrast imaging community can adapt their observing strategies to improve the sensitivity of future surveys.

astro-ph.IM↗

arXiv2025

Laboratory testing and characterization of a hybrid fast/slow readout mode for the H2RG detectors in SCALES

The upcoming SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) instrument for W.M. Keck Observatory will enable new imaging and low-/mid-resolution coronagraphic integral field spectroscopic observations over the wavelength range from 2-5 microns. At the heart of the instrument are two HgCdTe Teledyne Imaging H2RG detectors, designed for a 100kHz pixel clock rate (slow mode) with a fixed 4-channel readout. However, in ground-based operation at these wavelengths, the resulting minimum frame readout time will result in the infrared background saturating the detector. To enable high quality observations without saturation from the bright infrared sky background, we operate the detectors using a custom cable for buffered readout via the Teledyne Imaging SIDECAR ASIC followed by an AstroBlank/Markury Scientific MACIE controller card controlled by custom firmware. This combination allows the detector to be read out at faster pixel clock rates. This, in combination with the slow-mode H2RG, is what we characterize as hybrid fast-slow readout, enabling readout up to 18 times faster than would be possible in slow mode alone. In the UCLA Infrared Lab, we have performed room-temperature and cold tests with the H2RG detectors. We test and optimize full-frame data acquisition with pixel clock rates from 0.2-1.8 MHz. In these proceedings, we present a summary of the controller software used to operate the H2RG-ASIC-MACIE system. We present the methodology of, and preliminary results from, the UCLA tests of cryogenic operation of both H2RG detectors. We also outline the next steps in verification of detector performance, as well as integration with the SCALES instrument.

astro-ph.IM↗

arXiv2025

Direct imaging of AGN outflows and their origin with the 23 m Large Binocular Telescope

Active galactic nuclei (AGNs) are a key component of galaxy evolution due to feedback on the host from its supermassive black hole. The morphology of warm, in- and outflowing dusty material can reveal the nature of the onset of feedback, AGN feeding, and the unified model of AGN. Here we use the Large Binocular Telescope Interferometer (LBTI) to image the dense, obscuring disk and extended dusty outflow region of NGC 1068. In Fizeau imaging mode the LBTI synthesizes the equivalent resolution of a 22.8 m telescope. The 8.7 $μ$m Fizeau images of NGC 1068 {have an effective resolution of $47\times90$ mas ($3.3\times6.2$ pc)} in a 5" field of view after performing PSF deconvolution techniques described here. This is the only extragalactic source to be Fizeau imaged using the LBTI, and the images bridge the scales measured with the Very Large Telescope Interferometer (VLTI; 0.5-5 pc) and those of single telescopes such as JWST and Keck ($>15$ pc). The images detect and spatially resolve the low surface brightness mid-infrared (MIR) features in the AGN disk/wind region that are over-resolved by the VLTI. The images show strong correlation between MIR dust emission and near-infrared (NIR) emission of highly excited atomic lines observed by SINFONI. Such LBTI imaging is a precursor to infrared imaging using the upcoming generation of extremely large telescopes, with angular resolutions up to 6x better than JWST, the largest space telescope in orbit.

astro-ph.GA↗

arXiv2024

Resolving the Young 2 Cygni Run-away Star into a Binary using iLocater

Precision radial velocity (RV) spectrographs that use adaptive optics (AO) show promise to advance telescope observing capabilities beyond those of seeing-limited designs. We are building a spectrograph for the Large Binocular Telescope (LBT) named iLocater that uses AO to inject starlight directly into single mode fibers (SMF). iLocater's first acquisition camera system (the `SX' camera), which receives light from one of the 8.4m diameter primary mirrors of the LBT, was initially installed in summer 2019 and has since been used for several commissioning runs. We present results from first-light observations that include on-sky measurements as part of commissioning activities. Imaging measurements of the bright B3IV star 2 Cygni ($V=4.98$) resulted in the direct detection of a candidate companion star at an angular separation of only $θ= 70$ mas. Follow-up AO measurements using Keck/NIRC2 recover the candidate companion in multiple filters. An $R\approx1500$ miniature spectrograph recently installed at the LBT named ``Lili'' provides spatially resolved spectra of each binary component, indicating similar spectral types and strengthening the case for companionship. Studying the multiplicity of young runaway star systems like 2 Cygni ($36.6 \pm 0.5$ Myr) can help to understand formation mechanisms for stars that exhibit anomalous velocities through the galaxy. This on-sky demonstration illustrates the spatial resolution of the iLocater SX acquisition camera working in tandem with the LBT AO system; it further derisks a number of technical hurdles involved in combining AO with Doppler spectroscopy.

astro-ph.IM↗

arXiv2024

First laboratory and on-sky results of an adaptive secondary mirror with TNO-style actuators on the NASA Infrared Telescope Facility

We are developing an adaptive secondary mirror (ASM) that uses a new actuator technology created by the Netherlands Organization for Applied Scientific Research (TNO). The TNO hybrid variable reluctance actuators have more than an order of magnitude better efficiency over the traditional voice coil actuators that have been used on existing ASMs and show potential for improving the long-term robustness and reliability of ASMs. To demonstrate the performance, operations, and serviceability of TNO's actuators in an observatory, we have developed a 36-actuator prototype ASM for the NASA Infrared Telescope Facility (IRTF) called IRTF-ASM-1. IRTF-ASM-1 provides the first on-sky demonstration of this approach and will help us evaluate the long-term performance and use of this technology in an astronomical facility environment. We present calibration and performance results with the ASM in a Meniscus Hindle Sphere lens setup as well as preliminary on-sky results on IRTF. IRTF-ASM-1 achieved stable closed-loop performance on-sky with H-band Strehl ratios of 35-40% in long-exposure images under a variety of seeing conditions.

astro-ph.IM↗

arXiv2024

US Adaptive Optics Roadmap to Achieve Astro2020

In the recent Astro2020 Decadal Report, ''Pathways to Discovery in Astronomy and Astrophysics for the 2020s'' Adaptive Optics (AO) was identified as a crucial technology for a variety of reasons. These included an emphasis on high-contrast imaging and AO systems as being part of future technology development especially with application to the two US ELT projects. Instrument upgrades were also identified for existing 4m to 10m class telescopes which would incorporate upgrades to existing AO systems. As noted in the Report: (1) ''the central role of AO instrumentation and the importance of further development are rapidly growing, with novel concepts pushing toward wider area'', (2) ''Visible AO has high potential scientific return by opening up an entire wavelength regime to high angular resolution studies. The goal is to exploit the smaller diffraction limit of telescopes in the optical, yet both the coherence length and time decrease at shorter wavelengths requiring wavefront sensing at high spatial and temporal frequencies that are currently technologically challenging. This is an important developing area for the 2020s - 2030s.'', and (3) ''Such investments in AO systems development is a key risk mitigation strategy for ELTs, whose full resolution and sensitivity potential can only be realized with AO, and which is recognized as the most important technical risk for both GMT and TMT''. A workshop was held in May, 2023 to develop a Community Response document (this document) to provide feedback and suggested priorities to various funding agencies, such as NSF, NASA, and DoE, as to the AO Research and Development priorities to meet the technical and science objectives outlined in Astro2020 for ground-based AO, both stand-alone and in support of space missions.

astro-ph.IM↗

arXiv2023

SOUL at LBT: commissioning results, science and future

The SOUL systems at the Large Bincoular Telescope can be seen such as precursor for the ELT SCAO systems, combining together key technologies such as EMCCD, Pyramid WFS and adaptive telescopes. After the first light of the first upgraded system on September 2018, going through COVID and technical stops, we now have all the 4 systems working on-sky. Here, we report about some key control improvements and the system performance characterized during the commissioning. The upgrade allows us to correct more modes (500) in the bright end and increases the sky coverage providing SR(K)>20% with reference stars G$_{RP}$<17, opening to extragalcatic targets with NGS systems. Finally, we review the first astrophysical results, looking forward to the next generation instruments (SHARK-NIR, SHARK-Vis and iLocater), to be fed by the SOUL AO correction.

astro-ph.IM↗

arXiv2023

An adaptive optics upgrade for the Automated Planet Finder Telescope using an adaptive secondary mirror

As we enter the era of TESS and JWST, instrumentation that can carry out radial velocity measurements of exoplanet systems is in high demand. We will address this demand by upgrading the UC Lick Observatory's 2.4-meter Automated Planet Finder (APF) telescope with an adaptive optics (AO) system. The AO upgrade will be directly integrated into the APF telescope by replacing the telescope's static secondary mirror with a 61-actuator adaptive secondary mirror (ASM) to minimize the disturbance to the spectrograph optics. This upgrade is enabled by The Netherlands Organization for Applied Scientific Research's (TNO) large-format deformable mirror technology, which will be constructed using a new style of high-efficiency hybrid-variable reluctance actuator. We outline the technical design and manufacturing plan for the proposed APF AO upgrade and simulate the improvement to the science yield using HCIpy. Our simulations predict the AO upgrade will reduce the PSF instabilities due to atmospheric turbulence, concentrating the light on the spectrograph slit by a multiplicative factor of more than two (doubling the telescope's observing efficiency) for targets as dim as I = 14. When completed, the APF adaptive secondary mirror will be among the first pairings of an ASM with a radial velocity spectrograph and become a pathfinder for similar AO systems in telescopes of all sizes.

astro-ph.IM↗

arXiv2023

Improved companion mass limits for Sirius A with thermal infrared coronagraphy using a vector-apodizing phase plate and time-domain starlight-subtraction techniques

We use observations with the infrared-optimized MagAO system and Clio camera in 3.9 $μ$m light to place stringent mass constraints on possible undetected companions to Sirius A. We suppress the light from Sirius A by imaging it through a grating vector-apodizing phase plate coronagraph with 180-degree dark region (gvAPP-180). To remove residual starlight in post-processing, we apply a time-domain principal-components-analysis-based algorithm we call PCA-Temporal (PCAT), which uses eigen-time-series rather than eigen-images to subtract starlight. By casting the problem in terms of eigen-time-series, we reduce the computational cost of post-processing the data, enabling the use of the fully sampled dataset for improved contrast at small separations. We also discuss the impact of retaining fine temporal sampling of the data on final contrast limits. We achieve post-processed contrast limits of $1.5 \times 10^{-6}$ to $9.8 \times 10^{-6}$ outside of 0.75 arcsec which correspond to planet masses of 2.6 to 8.0 $M_J$. These are combined with values from the recent literature of high-contrast imaging observations of Sirius to synthesize an overall completeness fraction as a function of mass and separation. After synthesizing these recent studies and our results, the final completeness analysis rules out 99% of $\ge 9 \ M_J$ planets from 2.5-7 AU.

astro-ph.EP↗

arXiv2022

Design of SCALES: A 2-5 Micron Coronagraphic Integral Field Spectrograph for Keck Observatory

We present the design of SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) a new 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. SCALES enables low-resolution (R~50) spectroscopy, as well as medium-resolution (R~4,000) spectroscopy with the goal of discovering and characterizing cold exoplanets that are brightest in the thermal infrared. Additionally, SCALES has a 12x12" field-of-view imager that will be used for general adaptive optics science at Keck. We present SCALES's specifications, its science case, its overall design, and simulations of its expected performance. Additionally, we present progress on procuring, fabricating and testing long lead-time components.

astro-ph.IM↗

arXiv2021

End-to-end Simulation of the SCALES Integral Field Spectrograph

We present end-to-end simulations of SCALES, the third generation thermal-infrared diffraction limited imager and low/med-resolution integral field spectrograph (IFS) being designed for Keck. The 2-5 micron sensitivity of SCALES enables detection and characterization of a wide variety of exoplanets, including exoplanets detected through long-baseline astrometry, radial-velocity planets on wide orbits, accreting protoplanets in nearby star-forming regions, and reflected-light planets around the nearest stars. The simulation goal is to generate high-fidelity mock data to assess the scientific capabilities of the SCALES instrument at current and future design stages. The simulation processes arbitrary-resolution input intensity fields with a proposed observation pattern into an entire mock dataset of raw detector read-out lenslet-based IFS frames with calibrations and metadata, which are then reduced by the IFS data reduction pipeline to be analyzed by the user.

astro-ph.IM↗

arXiv2020

Performance of Large-Format Deformable Mirrors Constructed with TNO Variable Reluctance Actuators

Advancements in making high-efficiency actuators are an enabling technology for building the next generation of large-format deformable mirrors. The Netherlands Organization for Applied Scientific Research (TNO) has developed a new style of variable-reluctance actuator that requires approximately eighty times less power to operate as compared to the traditional style of voice-coil actuators. We present the performance results from laboratory testing of TNO's 57-actuator large-format deformable mirror from measuring the influence functions, linearity, hysteresis, natural shape flattening, actuator cross-coupling, creep, repeatability, and actuator lifetime. We measure a linearity of 99.4 +- 0.33% and hysteresis of 2.10 +- 0.23% over a stroke of 10 microns, indicating that this technology has strong potential for use in on-sky adaptive secondary mirrors (ASMs). We summarize plans for future lab prototypes and ASMs that will further demonstrate this technology.

astro-ph.IM↗

arXiv2019

High Spatial Resolution Thermal-Infrared Spectroscopy with ALES: Resolved Spectra of the Benchmark Brown Dwarf Binary HD 130948BC

We present 2.9-4.1 micron integral field spectroscopy of the L4+L4 brown dwarf binary HD 130948BC, obtained with the Arizona Lenslets for Exoplanet Spectroscopy (ALES) mode of the Large Binocular Telescope Interferometer (LBTI). The HD 130948 system is a hierarchical triple system, in which the G2V primary is joined by two co-orbiting brown dwarfs. By combining the age of the system with the dynamical masses and luminosities of the substellar companions, we can test evolutionary models of cool brown dwarfs and extra-solar giant planets. Previous near-infrared studies suggest a disagreement between HD 130948BC luminosities and those derived from evolutionary models. We obtained spatially-resolved, low-resolution (R~20) L-band spectra of HD 130948B and C to extend the wavelength coverage into the thermal infrared. Jointly using JHK photometry and ALES L-band spectra for HD 130948BC, we derive atmospheric parameters that are consistent with parameters derived from evolutionary models. We leverage the consistency of these atmospheric quantities to favor a younger age (0.50 \pm 0.07 Gyr) of the system compared to the older age (0.79 \pm 0.22 Gyr) determined with gyrochronology in order to address the luminosity discrepancy.

astro-ph.SR↗