arXiv subjects

Philip Hofmann

Publications and source records attributed to Philip Hofmann.

122 records · Page 7Linked to original sources

arXiv2013

Direct view on the ultrafast carrier dynamics in graphene

The ultrafast dynamics of excited carriers in graphene is closely linked to the Dirac spectrum and plays a central role for many electronic and optoelectronic applications. Harvesting energy from excited electron-hole pairs, for instance, is only possible if these pairs can be separated before they lose energy to vibrations, merely heating the lattice. While the hot carrier dynamics in graphene could so far only be accessed indirectly, we here present a direct time-resolved view on the Dirac cone by angle-resolved photoemission (ARPES). This allows us to show the quasi-instant thermalisation of the electron gas to a temperature of more than 2000 K; to determine the time-resolved carrier density; to disentangle the subsequent decay into excitations of optical phonons and acoustic phonons (directly and via supercollisions); and to show how the presence of the hot carrier distribution affects the lifetime of the states far below the Fermi energy.

cond-mat.mes-hall↗

arXiv2013

Tailoring the electronic texture of a topological insulator via its surface orientation

Three dimensional topological insulator crystals consist of an insulating bulk enclosed by metallic surfaces, and detailed theoretical predictions about the surface state band topology and spin texture are available. While several topological insulator materials are currently known, the existence and topology of these metallic states have only ever been probed for one particular surface orientation of a given material. For most topological insulators, such as Bi$_{1-x}$Sb$_{x}$ and Bi$_2$Se$_3$, this surface is the closed-packed (111) surface and it supports one topologically guaranteed surface state Dirac cone. Here we experimentally realise a non closed-packed surface of a topological insulator, Bi$_{1-x}$Sb$_{x}$(110), and probe the surface state topology by angle-resolved photoemission. As expected, this surface also supports metallic states but the change in surface orientation drastically modifies the band topology, leading to three Dirac cones instead of one, in excellent agreement with the theoretical predictions but in contrast to any other experimentally studied TI surface. This illustrates the possibility to tailor the basic topological properties of the surface via its crystallographic direction. Here it introduces a valley degree of freedom not previously achieved for topological insulator systems.

cond-mat.str-el↗

arXiv2012

Detecting the local transport properties and the dimensionality of transport of epitaxial graphene by a multi-point probe approach

The electronic transport properties of epitaxial monolayer graphene (MLG) and hydrogen-intercalated quasi free-standing bilayer graphene (QFBLG) on SiC(0001) are investigated by micro multi-point probes. Using a probe with 12 contacts, we perform four-point probe measurements with the possibility to effectively vary the contact spacing over more than one order of magnitude, allowing us to establish that the transport is purely two-dimensional. Combined with the carrier density obtained by angle-resolved photoemission spectroscopy, we find the room temperature mobility of MLG to be (870+-120)cm2/Vs. The transport in QFBLG is also found to be two-dimensional with a mobility of (1600+-160) cm2/Vs.

cond-mat.mes-hall↗

arXiv2012

Direct band structure measurement of a buried two-dimensional electron gas

Buried two dimensional electron gasses (2DEGs) have recently attracted considerable attention as a testing ground for both fundamental physics and quantum computation applications. Such 2DEGs can be created by phosphorus delta (δ) doping of silicon, a technique in which a dense and narrow dopant profile is buried beneath the Si surface. Phosphorous δ-doping is a particularly attractive platform for fabricating scalable spin quantum bit architectures, compatible with current semiconductor technology. The band structure of the δ-layers that underpin these devices has been studied intensely using different theoretical methods, but it has hitherto not been possible to directly compare these predictions with experimental data. Here we report the first measurement of the electronic band structure of a δ-doped layer below the Si(001) surface by angle resolved photoemission spectroscopy (ARPES). Our measurements confirm the layer to be metallic and give direct access to the Fermi level position. Surprisingly, the direct observation of the states is possible despite them being buried far below the surface. Using this experimental approach, buried states in a wide range of other material systems, including metallic oxide interfaces, could become accessible to direct spectroscopic investigations.

cond-mat.mtrl-sci↗

arXiv2012

Electron-phonon coupling in quasi free-standing graphene

Quasi free-standing monolayer graphene can be produced by intercalating species like oxygen or hydrogen between epitaxial graphene and the substrate crystal. If the graphene is indeed decoupled from the substrate, one would expect the observation of a similar electronic dispersion and many-body effects, irrespective of the substrate and the material used to achieve the decoupling. Here we investigate the electron-phonon coupling in two different types of quasi free-standing monolayer graphene: decoupled from SiC via hydrogen intercalation and decoupled from Ir via oxygen intercalation. Both systems show a similar overall behaviour of the self-energy and a weak renormalization of the bands near the Fermi energy. The electron-phonon coupling is found to be sufficiently weak to make the precise determination of the coupling constant lambda through renormalization difficult. The estimated value of lambda is 0.05(3) for both systems.

cond-mat.str-el↗

arXiv2012

Transfer-free electrical insulation of epitaxial graphene from its metal substrate

High-quality, large-area epitaxial graphene can be grown on metal surfaces but its transport properties cannot be exploited because the electrical conduction is dominated by the substrate. Here we insulate epitaxial graphene on Ru(0001) by a step-wise intercalation of silicon and oxygen, and the eventual formation of a SiO$_2$ layer between the graphene and the metal. We follow the reaction steps by x-ray photoemission spectroscopy and demonstrate the electrical insulation using a nano-scale multipoint probe technique.

cond-mat.mes-hall↗

arXiv2012

Robust Surface Doping of Bi$_2$Se$_3$ by Rb Intercalation

Rubidium adsorption on the surface of the topological insulator Bi$_2$Se$_3$ is found to induce a strong downward band bending, leading to the appearance of a quantum-confined two dimensional electron gas states (2DEGs) in the conduction band. The 2DEGs shows a strong Rashba-type spin-orbit splitting, and it has previously been pointed out that this has relevance to nano-scale spintronics devices. The adsorption of Rb atoms, on the other hand, renders the surface very reactive and exposure to oxygen leads to a rapid degrading of the 2DEGs. We show that intercalating the Rb atoms, presumably into the van der Waals gaps in the quintuple layer structure of Bi$_2$Se$_3$, drastically reduces the surface reactivity while not affecting the promising electronic structure. The intercalation process is observed above room temperature and accelerated with increasing initial Rb coverage, an effect that is ascribed to the Coulomb interaction between the charged Rb ions. Coulomb repulsion is also thought to be responsible for a uniform distribution of Rb on the surface.

cond-mat.mtrl-sci↗

arXiv2012

The electronic structure of clean and adsorbate-covered Bi2Se3: an angle-resolved photoemission study

Angle-resolved photoelectron spectroscopy is used for a detailed study of the electronic structure of the topological insulator Bi2Se3. Nominally stoichiometric and calcium-doped samples were investigated. The pristine surface shows the topological surface state in the bulk band gap. As time passes, the Dirac point moves to higher binding energies, indicating an increasingly strong downward bending of the bands near the surface. This time-dependent band bending is related to a contamination of the surface and can be accelerated by intentionally exposing the surface to carbon monoxide and other species. For a sufficiently strong band bending, additional states appear at the Fermi level. These are interpreted as quantised conduction band states. For large band bendings, these states are found to undergo a strong Rashba splitting. The formation of quantum well states is also observed for the valence band states. Different interpretations of similar data are also discussed.

cond-mat.mtrl-sci↗

arXiv2012

High-temperature behaviour of supported graphene: electron-phonon coupling and substrate-induced doping

One of the salient features of graphene is the very high carrier mobility that implies tremendous potential for use in electronic devices. Unfortunately, transport measurements find the expected high mobility only in freely suspended graphen. When supported on a surface, graphene shows a strongly reduced mobility, and an especially severe reduction for temperatures above 200 K. A temperature-dependent mobility reduction could be explained by scattering of carriers with phonons, but this is expected to be weak for pristine, weakly-doped graphene. The mobility reduction has therefore been ascribed to the interaction with confined ripples or substrate phonons. Here we study the temperature-dependent electronic structure of supported graphene by angle-resolved photoemission spectroscopy, a technique that can reveal the origin of the phenomena observed in transport measurements. We show that the electron-phonon coupling for weakly-doped, supported graphene on a metal surface is indeed extremely weak, reaching the lowest value ever reported for any material. However, the temperature-dependent dynamic interaction with the substrate leads to a complex and dramatic change in the carrier type and density that is relevant for transport. Using ab initio molecular dynamics simulations, we show that these changes in the electronic structure are mainly caused by fluctuations in the graphene-substrate distance.

cond-mat.mes-hall↗

arXiv2012

Surface states on a topologically non-trivial semimetal: The case of Sb(110)

The electronic structure of Sb(110) is studied by angle-resolved photoemission spectroscopy and first-principle calculations, revealing several electronic surface states in the projected bulk band gaps around the Fermi energy. The dispersion of the states can be interpreted in terms of a strong spin-orbit splitting. The bulk band structure of Sb has the characteristics of a strong topological insulator with a Z2 invariant nu0=1. This puts constraints on the existence of metallic surface states and the expected topology of the surface Fermi contour. However, bulk Sb is a semimetal, not an insulator and these constraints are therefore partly relaxed. This relation of bulk topology and expected surface state dispersion for semimetals is discussed.

cond-mat.str-el↗

arXiv2011

Simultaneous quantization of bulk conduction and valence states through adsorption of nonmagnetic impurities on Bi2Se3

Exposing the (111) surface of the topological insulator Bi2Se3 to carbon monoxide results in strong shifts of the features observed in angle-resolved photoemission. The behavior is very similar to an often reported `aging' effect of the surface and it is concluded that this aging is most likely due to the adsorption of rest gas molecules. The spectral changes are also similar to those recently reported in connection with the adsorption of the magnetic adatom Fe. All spectral changes can be explained by a simultaneous confinement of the conduction band and valence band states. This is only possible because of the unusual bulk electronic structure of Bi2Se3. The valence band quantization leads to spectral features which resemble those of a band gap opening at the Dirac point.

cond-mat.mtrl-sci↗

arXiv2011

Stability of the Bi2Se3(111) topological state: electron-phonon and -defect scattering

The electron dynamics of the topological surface state on Bi2Se3(111) is investigated by temperature-dependent angle-resolved photoemission. The electron-phonon coupling strength is determined in a spectral region for which only intraband scattering involving the topological surface band is possible. The electron-phonon coupling constant is found to be lambda=0.25(5), more than an order of magnitude higher than the corresponding value for intraband scattering in the noble metal surface states. The stability of the topological state with respect to surface irregularities was also tested by introducing a small concentration of surface defects via ion bombardment. It is found that, in contrast to the bulk states, the topological state can no longer be observed in the photoemission spectra and this cannot merely be attributed to surface defect-induced momentum broadening.

cond-mat.mtrl-sci↗

arXiv2010

Coexistence of the topological state and a two-dimensional electron gas on the surface of Bi2Se3

Topological insulators are a recently discovered class of materials with fascinating properties: While the inside of the solid is insulating, fundamental symmetry considerations require the surfaces to be metallic. The metallic surface states show an unconventional spin texture, electron dynamics and stability. Recently, surfaces with only a single Dirac cone dispersion have received particular attention. These are predicted to play host to a number of novel physical phenomena such as Majorana fermions, magnetic monopoles and unconventional superconductivity. Such effects will mostly occur when the topological surface state lies in close proximity to a magnetic or electric field, a (superconducting) metal, or if the material is in a confined geometry. Here we show that a band bending near to the surface of the topological insulator Bi$_2$Se$_3$ gives rise to the formation of a two-dimensional electron gas (2DEG). The 2DEG, renowned from semiconductor surfaces and interfaces where it forms the basis of the integer and fractional quantum Hall effects, two-dimensional superconductivity, and a plethora of practical applications, coexists with the topological surface state in Bi$_2$Se$_3$. This leads to the unique situation where a topological and a non-topological, easily tunable and potentially superconducting, metallic state are confined to the same region of space.

cond-mat.mtrl-sci↗

arXiv2009

Fermi surface of MoO2 studied by angle-resolved photoemission spectroscopy, de Haas-van Alphen measurements, and electronic structure calculations

A comprehensive study of the electronic properties of monoclinic MoO2 from both an experimental and a theoretical point of view is presented. We focus on the investigation of the Fermi body and the band structure using angle resolved photoemission spectroscopy, de Haas-van Alphen measurements, and electronic structure calculations. For the latter, the new full-potential augmented spherical wave (ASW) method has been applied. Very good agreement between the experimental and theoretical results is found. In particular, all Fermi surface sheets are correctly identified by all three approaches. Previous controversies concerning additional hole-like surfaces centered around the Z- and B-point could be resolved; these surfaces were an artefact of the atomic-sphere approximation used in the old calculations. Our results underline the importance of electronic structure calculations for the understanding of MoO2 and the neighbouring rutile-type early transition-metal dioxides. This includes the low-temperature insulating phases of VO2 and NbO2, which have crystal structures very similar to that of molybdenum dioxide and display the well-known prominent metal-insulator transitions.

cond-mat.str-el↗