arXiv subjects

Philip Krantz

Publications and source records attributed to Philip Krantz.

At least 19 recordsLinked to original sources

arXiv2026

Effects of Josephson Junction Non-idealities on Adiabatic Quantum Flux Parametron Circuits

Adiabatic quantum flux parametron (AQFP) gate is a promising approach to scale up the cryogenic microwave electronics for superconducting qubit multiplexed control. However, the performance of these circuits depends on the quality of the Josephson junctions which are ideally superconductor-insulator-superconductor (SIS) type following the ideal sinusoidal relation between current and quantum phase. We demonstrate how the non-sinusoidal current-phase relation in Superconductor-Normal metal-Superconductor (SNS) and weak link (WL) junctions affects the speed, delay, and margin of the AQFP gates. The JJ models are defined in the Keysight ADS simulator using symbolically defined device (SDD) method.

quant-ph↗

arXiv2026

Digital Predistortion for Flux Control of Tunable Superconducting Qubits

Flux-tunable superconducting qubits rely on fast flux control pulses to implement two-qubit entangling quantum gates, a key building block for quantum algorithms. However, distortion effects introduced by non-ideal control electronics, parasitic components, and the cryogenic quantum chip response can all degrade the gate fidelity. We present a digital predistortion (DPD) framework for characterizing and then compensating for these distortions using a combination of infinite impulse response (IIR) and finite impulse response (FIR) filters. Experiments on a flux-tunable quantum processing unit (QPU) demonstrate a successful correction of step-response distortions on the flux-control line, with a compensated control signal showing only sub-percent deviations from the ideal target linear behavior. The demonstrated method enables automated rapid calibration of flux control channels for superconducting QPUs.

quant-ph↗

arXiv2026

Impact of Pump Phase-Noise on Josephson Traveling-Wave Parametric Amplifiers

Superconducting traveling-wave parametric amplifiers (TWPAs) are essential elements for enhancing the signal-to-noise ratio (SNR) and thus the read-out fidelity of superconducting qubits because of their high gain and near quantum-limited noise. However, the impact of the pump source, e.g., phase noise on these amplifiers, has not yet been studied. In this work, we show that among the two amplification processes in JTWPAs, the three-wave mixing (3WM) process is more sensitive to the pump phase noise than the four-wave mixing (4WM) process. We show that the even-order nonlinearity of 4th order and above in three-wave mixing is responsible for more than 10 dB increase of phase noise at high frequency offsets within the phase noise mask as the power of the pump increases. A polynomial model of the amplifier and cyclo-stationary property of phase noise also corroborate with the simulations. The Harmonic Balance (HB) periodic noise analysis tool and Leeson phase noise model in Keysight Advanced Design System (ADS) simulator were used in this study.

quant-ph↗

arXiv2025

Modeling Josephson traveling-wave parametric amplifiers with electromagnetic and circuit co-simulation

Optimizing the performance of cryogenic quantum amplifiers is a key step toward achieving high-fidelity and scalable qubit readout. In this work, we present efficient and accurate modeling of a Josephson traveling-wave parametric amplifier (JTWPA) based on electromagnetic (EM) and circuit co-simulation. In contrast to conventional simulation methods where an equivalent lumped-element circuit model of the JTWPA is required, we directly perform full EM analysis of the device to faithfully determine the linear response. The extracted S-parameters are then fed into a nonlinear harmonic balance simulator with Josephson junctions represented as circuit elements. The simulated linear and gain properties are compared with experimental results and show good agreement.

quant-ph↗

arXiv2024

Modeling flux-quantizing Josephson junction circuits in Keysight ADS

We introduce Josephson junction and inductor models in Keysight ADS that feature an auxiliary flux port, and facilitate the expression of flux quantization conditions in simulation of superconducting microwave circuits. We present several examples that illustrate our methodology for constructing flux-quantizing circuits, including dc- and rf-SQUIDs, tunable couplers, and parametric amplifiers using SNAIL and rf-SQUID arrays. We perform DC, S-parameter, and harmonic balance simulations to validate our models and methods against theory and published experimental results.

cond-mat.supr-con↗

arXiv2023

Broadband Squeezed Microwaves and Amplification with a Josephson Traveling-Wave Parametric Amplifier

Squeezing of the electromagnetic vacuum is an essential metrological technique used to reduce quantum noise in applications spanning gravitational wave detection, biological microscopy, and quantum information science. In superconducting circuits, the resonator-based Josephson-junction parametric amplifiers conventionally used to generate squeezed microwaves are constrained by a narrow bandwidth and low dynamic range. In this work, we develop a dual-pump, broadband Josephson traveling-wave parametric amplifier that combines a phase-sensitive extinction ratio of 56 dB with single-mode squeezing on par with the best resonator-based squeezers. We also demonstrate two-mode squeezing at microwave frequencies with bandwidth in the gigahertz range that is almost two orders of magnitude wider than that of contemporary resonator-based squeezers. Our amplifier is capable of simultaneously creating entangled microwave photon pairs with large frequency separation, with potential applications including high-fidelity qubit readout, quantum illumination and teleportation.

quant-ph↗

arXiv2022

X-parameter based design and simulation of Josephson traveling-wave parametric amplifiers for quantum computing applications

We present an efficient, accurate, and comprehensive analysis framework for generic, multi-port nonlinear parametric circuits, in the presence of dissipation from lossy circuit components, based on "quantum-adapted" X-parameters. We apply this method to Josephson traveling-wave parametric amplifiers (JTWPAs) - a key component in superconducting and spin qubit quantum computing architectures - which are challenging to model accurately due to their thousands of linear and nonlinear circuit components. X-parameters are generated from a harmonic balance solution of the classical nonlinear circuit and then mapped to the field ladder operator basis, so that the energy associated with each of the multiple interacting modes corresponds to photon occupancy, rather than classical power waves. Explicit relations for the quantum efficiency of a generic, multi-port, multi-frequency parametric circuit are presented and evaluated for two distinct JTWPA designs. The gain and quantum efficiency are consistent with those obtained from Fourier analysis of time-domain solutions, but with enhanced accuracy, speed, and the ability to include real-world impairments, statistical variations, parasitic effects, and impedance mismatches (in- and out-of-band) seamlessly. The unified flow is implemented in Keysight's PathWave Advanced Design System (ADS) and independently in an open-source simulation code, JosephsonCircuits.jl, from the MIT authors.

quant-ph↗

arXiv2022

Microwave calibration of qubit drive line components at millikelvin temperatures

Systematic errors in qubit state preparation arise due to non-idealities in the qubit control lines such as impedance mismatch. Using a data-based methodology of short-open-load calibration at a temperature of 30 mK, we report calibrated 1-port scattering parameter data of individual qubit drive line components. At 5~GHz, cryogenic return losses of a 20-dB-attenuator, 10-dB-attenuator, a 230-mm-long 0.86-mm silver-plated cupronickel coaxial cable, and a 230-mm-long 0.86-mm NbTi coaxial cable were found to be 35$^{+3}_{-2}$ dB, 33$^{+3}_{-2}$ dB, 34$^{+3}_{-2}$ dB, and 29$^{+2}_{-1}$ dB respectively. For the same frequency, we also extract cryogenic insertion losses of 0.99$^{+0.04}_{-0.04}$ dB and 0.02$^{+0.04}_{-0.04}$ dB for the coaxial cables. We interpret the results using a master equation simulation of all XY gates performed on a single qubit. For example, we simulate a sequence of two 5 ns gate pulses (X & Y) through a 2-element Fabry-Pérot cavity with 276-mm path length directly preceding the qubit, and establish that the return loss of its reflective elements must be >9.7 dB (> 14.7 dB) to obtain 99.9 % (99.99 %) gate fidelity.

quant-ph↗

arXiv2021

A Quantum Engineer's Guide to Superconducting Qubits

The aim of this review is to provide quantum engineers with an introductory guide to the central concepts and challenges in the rapidly accelerating field of superconducting quantum circuits. Over the past twenty years, the field has matured from a predominantly basic research endeavor to one that increasingly explores the engineering of larger-scale superconducting quantum systems. Here, we review several foundational elements -- qubit design, noise properties, qubit control, and readout techniques -- developed during this period, bridging fundamental concepts in circuit quantum electrodynamics (cQED) and contemporary, state-of-the-art applications in gate-model quantum computation.

quant-ph↗

arXiv2021

Multi-level Quantum Noise Spectroscopy

System noise identification is crucial to the engineering of robust quantum systems. Although existing quantum noise spectroscopy (QNS) protocols measure an aggregate amount of noise affecting a quantum system, they generally cannot distinguish between the underlying processes that contribute to it. Here, we propose and experimentally validate a spin-locking-based QNS protocol that exploits the multi-level energy structure of a superconducting qubit to achieve two notable advances. First, our protocol extends the spectral range of weakly anharmonic qubit spectrometers beyond the present limitations set by their lack of strong anharmonicity. Second, the additional information gained from probing the higher-excited levels enables us to identify and distinguish contributions from different underlying noise mechanisms.

quant-ph↗

arXiv2020

Programming a quantum computer with quantum instructions

The equivalence between the instructions used to define programs and the input data on which the instructions operate is a basic principle of classical computer architectures and programming. Replacing classical data with quantum states enables fundamentally new computational capabilities with scaling advantages for many applications, and numerous models have been proposed for realizing quantum computation. However, within each of these models, the quantum data are transformed by a set of gates that are compiled using solely classical information. Conventional quantum computing models thus break the instruction-data symmetry: classical instructions and quantum data are not directly interchangeable. In this work, we use a density matrix exponentiation protocol to execute quantum instructions on quantum data. In this approach, a fixed sequence of classically-defined gates performs an operation that uniquely depends on an auxiliary quantum instruction state. Our demonstration relies on a 99.7% fidelity controlled-phase gate implemented using two tunable superconducting transmon qubits, which enables an algorithmic fidelity surpassing 90% at circuit depths exceeding 70. The utilization of quantum instructions obviates the need for costly tomographic state reconstruction and recompilation, thereby enabling exponential speedup for a broad range of algorithms, including quantum principal component analysis, the measurement of entanglement spectra, and universal quantum emulation.

quant-ph↗

arXiv2020

Improved success probability with greater circuit depth for the quantum approximate optimization algorithm

Present-day, noisy, small or intermediate-scale quantum processors---although far from fault-tolerant---support the execution of heuristic quantum algorithms, which might enable a quantum advantage, for example, when applied to combinatorial optimization problems. On small-scale quantum processors, validations of such algorithms serve as important technology demonstrators. We implement the quantum approximate optimization algorithm (QAOA) on our hardware platform, consisting of two superconducting transmon qubits and one parametrically modulated coupler. We solve small instances of the NP-complete exact-cover problem, with 96.6% success probability, by iterating the algorithm up to level two.

quant-ph↗

arXiv2020

Waveguide Quantum Electrodynamics with Giant Superconducting Artificial Atoms

Models of light-matter interactions typically invoke the dipole approximation, within which atoms are treated as point-like objects when compared to the wavelength of the electromagnetic modes that they interact with. However, when the ratio between the size of the atom and the mode wavelength is increased, the dipole approximation no longer holds and the atom is referred to as a "giant atom". Thus far, experimental studies with solid-state devices in the giant-atom regime have been limited to superconducting qubits that couple to short-wavelength surface acoustic waves, only probing the properties of the atom at a single frequency. Here we employ an alternative architecture that realizes a giant atom by coupling small atoms to a waveguide at multiple, but well separated, discrete locations. Our realization of giant atoms enables tunable atom-waveguide couplings with large on-off ratios and a coupling spectrum that can be engineered by device design. We also demonstrate decoherence-free interactions between multiple giant atoms that are mediated by the quasi-continuous spectrum of modes in the waveguide-- an effect that is not possible to achieve with small atoms. These features allow qubits in this architecture to switch between protected and emissive configurations in situ while retaining qubit-qubit interactions, opening new possibilities for high-fidelity quantum simulations and non-classical itinerant photon generation.

quant-ph↗

arXiv2020

Generating Spatially Entangled Itinerant Photons with Waveguide Quantum Electrodynamics

Realizing a fully connected network of quantum processors requires the ability to distribute quantum entanglement. For distant processing nodes, this can be achieved by generating, routing, and capturing spatially entangled itinerant photons. In this work, we demonstrate the deterministic generation of such photons using superconducting transmon qubits that are directly coupled to a waveguide. In particular, we generate two-photon N00N states and show that the state and spatial entanglement of the emitted photons are tunable via the qubit frequencies. Using quadrature amplitude detection, we reconstruct the moments and correlations of the photonic modes and demonstrate state preparation fidelities of $84\%$. Our results provide a path towards realizing quantum communication and teleportation protocols using itinerant photons generated by quantum interference within a waveguide quantum electrodynamics architecture.

quant-ph↗

arXiv2020

Engineering Framework for Optimizing Superconducting Qubit Designs

Superconducting quantum technologies require qubit systems whose properties meet several often conflicting requirements, such as long coherence times and high anharmonicity. Here, we provide an engineering framework based on a generalized superconducting qubit model in the flux regime, which abstracts multiple circuit design parameters and thereby supports design optimization across multiple qubit properties. We experimentally investigate a special parameter regime which has both high anharmonicity ($\sim\!1$GHz) and long quantum coherence times ($T_1\!=\!40\!-\!80\,\mathrm{μs}$ and $T_\mathrm{2Echo}\!=\!2T_1$).

quant-ph↗

arXiv2020

Superconducting Qubits: Current State of Play

Superconducting qubits are leading candidates in the race to build a quantum computer capable of realizing computations beyond the reach of modern supercomputers. The superconducting qubit modality has been used to demonstrate prototype algorithms in the 'noisy intermediate scale quantum' (NISQ) technology era, in which non-error-corrected qubits are used to implement quantum simulations and quantum algorithms. With the recent demonstrations of multiple high fidelity two-qubit gates as well as operations on logical qubits in extensible superconducting qubit systems, this modality also holds promise for the longer-term goal of building larger-scale error-corrected quantum computers. In this brief review, we discuss several of the recent experimental advances in qubit hardware, gate implementations, readout capabilities, early NISQ algorithm implementations, and quantum error correction using superconducting qubits. While continued work on many aspects of this technology is certainly necessary, the pace of both conceptual and technical progress in the last years has been impressive, and here we hope to convey the excitement stemming from this progress.

quant-ph↗

arXiv2019

Characterizing decoherence rates of a superconducting qubit by direct microwave scattering

We experimentally investigate a superconducting qubit coupled to the end of an open transmission line, in a regime where the qubit decay rates to the transmission line and to its own environment are comparable. We perform measurements of coherent and incoherent scattering, on- and off-resonant fluorescence, and time-resolved dynamics to determine the decay and decoherence rates of the qubit. In particular, these measurements let us discriminate between non-radiative decay and pure dephasing. We combine and contrast results across all methods and find consistent values for the extracted rates. The results show that the pure dephasing rate is one order of magnitude smaller than the non-radiative decay rate for our qubit. Our results indicate a pathway to benchmark decoherence rates of superconducting qubits in a resonator-free setting.

quant-ph↗

arXiv2018

Quantum coherent control of a hybrid superconducting circuit made with graphene-based van der Waals heterostructures

Quantum coherence and control is foundational to the science and engineering of quantum systems. In van der Waals (vdW) materials, the collective coherent behavior of carriers has been probed successfully by transport measurements. However, temporal coherence and control, as exemplified by manipulating a single quantum degree of freedom, remains to be verified. Here we demonstrate such coherence and control of a superconducting circuit incorporating graphene-based Josephson junctions. Furthermore, we show that this device can be operated as a voltage-tunable transmon qubit, whose spectrum reflects the electronic properties of massless Dirac fermions traveling ballistically. In addition to the potential for advancing extensible quantum computing technology, our results represent a new approach to studying vdW materials using microwave photons in coherent quantum circuits.

cond-mat.mes-hall↗