SearcharxivSearch

arXiv subjects

Philip Mauskopf

Publications and source records attributed to Philip Mauskopf.

At least 19 recordsLinked to original sources

Robust Joint Estimation of Galaxy Redshift and Spectral Templates using Online Dictionary Learning

We present a novel approach to analyzing astronomical spectral survey data using our non-linear extension of an online dictionary learning algorithm. Current and upcoming surveys such as SPHEREx will use spectral data to build a 3D map of the universe by estimating the redshifts of millions of galaxies. Existing algorithms rely on hand-curated external templates and have limited performance due to model mismatch error. We address these limitations by developing a new algorithm that jointly estimates both the underlying spectral features in common across the entire dataset, as well as the redshift of each galaxy. To do this, we significantly extend an existing online dictionary learning algorithm, and apply this approach to redshift estimation for the first time. Our new approach scales well to large datasets since we only process a single spectrum in memory at a time. Our algorithm performs better than a state-of-the-art existing algorithm when analyzing a mock SPHEREx dataset, achieving a normalized median absolute deviation (NMAD) of 0.18% and a catastrophic error rate of 0.40% when analyzing noiseless data. Our algorithm also performs well over a wide range of signal to noise ratios (S/N), delivering sub-percent NMAD and catastrophic error above median S/N of 20. We released our algorithm publicly and it is available on github.

astro-ph.IM

Design of ALPHA Phase I: A Plasma Haloscope for 10--20 GHz Post-Inflation Axions

The axion is a well-motivated hypothetical particle capable of resolving both the strong CP problem and the dark matter mystery, with recent post-inflationary cosmological simulations favoring masses above 40 μeV. Plasma haloscopes serve as a promising experimental approach to reach theoretically preferred sensitivities in this mass range. ALPHA, hosted at Yale Wright Laboratory, is an international collaboration developing plasma haloscopes to search for QCD dark matter axions. In this letter we present the detailed design and sensitivity projection for the first phase of the ALPHA experiment, which will search the mass range from 10 GHz to 20 GHz (~40 μeV to 80 μeV). This search will make use of wire-array plasma resonators to decouple the physical size from the resonant frequency, a limitation typically faced by traditional microwave cavities, allowing broadband sensitivity approaching KSVZ coupling strengths.

hep-ex

CCAT: Design, Implementation, and Testing of a System to Read Out over 10,000 280 GHz KIDs using RFSoC Electronics

Over the past decade, kinetic inductance detectors (KIDs) have emerged as a viable superconducting technology for astrophysics at millimeter and submillimeter wavelengths. KIDs spanning 210 - 850 GHz across seven instrument modules will be deployed in the Prime-Cam instrument of CCAT Observatory's Fred Young Submillimeter Telescope at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. The natural frequency-division multiplexed readout of KIDs allows hundreds of detectors to be coupled to a single radio frequency (RF) transmission line, but requires sophisticated warm readout electronics. The FPGA-based Xilinx ZCU111 radio frequency system on chip (RFSoC) offers a promising and flexible solution to the challenge of warm readout. CCAT uses custom packaged RFSoCs to read out KIDs in the Prime-Cam instrument. Each RFSoC can simultaneously read out four RF channels with up to 1,000 detectors spanning a 512 MHz bandwidth per channel using the current firmware. We use five RFSoCs to read out the >10,000 KIDs in the broadband 280 GHz instrument module. Here, we describe and demonstrate the readout hardware, software and pipeline for the RFSoC system. We present a detector position map of the 280 GHz module focal plane and preliminary averaged spectral responses of a small subset of detectors from the TiN and first Al arrays. These measurements demonstrate our ability to simultaneously readout thousands of detectors, validate the end-to-end performance of the readout and optical systems, and represent a critical step toward reading out the ~100,000 KIDs in Prime-Cam in its future full capacity configuration.

astro-ph.IM

An Open Source RFSoC-based Readout Electronics System for Arrays of Kinetic Inductance Detectors and Superconducting Resonators

We present a novel readout electronics system for large arrays of superconducting electromagnetic resonators, such as kinetic inductance detectors (KIDs), based on a Radio Frequency System on Chip (RFSoC) architecture. Each channel in the readout system is designed for frequency division multiplexing of up to 1024 high quality factor resonances placed on a single microwave transmission line at unique frequencies within a 512 MHz bandwidth. We describe the design of the digital and analog signal processing chains for the implementation of a two-channel 2048-resonator system on the Xilinx ZCU111 RFSoC evaluation board in combination with a custom intermediate frequency (IF) system to convert the RFSoC band to higher frequencies up to 4 GHz. We also detail an associated software interface that provides a range of tools commonly utilized for characterizing KID resonators and for operating them as part of a photometric millimeter-wave imager. We additionally provide noise characterizations of the individual readout components, along with the complete readout system in isolation and in operation to readout KID resonators.

physics.ins-det

KID Detector Readout Electronics Development for Habitable Worlds Observatory

We present the status and goals of the readout electronics system we are developing to support the detector arrays in the coronagraph instrument on the NASA Habitable Worlds Observatory (HWO) mission currently in development. HWO aims to revolutionize exoplanet exploration by performing direct imaging and spectroscopy of 25 or more habitable exoplanets, and to resolve a broad range of astrophysics science questions as well. Since exoplanet yield depends critically on the detector dark count rate, as we show in this paper, the ambitious goals of HWO require arrays of single-photon energy-resolving detectors. We argue that Kinetic Inductance Detectors (KIDs) are best suited to meet these requirements. To support the detectors required for HWO and future far-IR missions, at the required power consumption and detector count, we are developing a radiation-tolerant reconfigurable readout system for both imaging and energy-resolving single photon KID detector arrays. We leverage an existing RFSoC-based system we built for NASA balloons that has a power consumption of 30 Watts and reads out 2000-4000 detectors (i.e. 7-15 mW/pixel), and move to a radiation tolerant Kintex Ultrascale FPGA chip to bring low-power wide bandwidth readout to a space-qualified platform for the first time. This improves significantly over previous spaceflight systems, and delivers what is required for NASA's future needs: ~100,000 pixels with less than 1 kW total power consumption. Overall, the system we are developing is a significant step forward in capability, and retires many key risks for the Habitable Worlds Observatory mission.

astro-ph.IM

CubeSounder: Low SWaP-C 180 GHz Radiometer for Atmospheric Sensing Tested on High Altitude Balloons

Microwave sounding is the leading driver of global numerical weather forecasting, but is limited by the scalability of such instruments. With modern machining and commercial microwave components, it is now possible to design low size, weight, power, and cost (SWaP-C) microwave spectrometers while maintaining wide bandwidth performance. Here we report on the status of CubeSounder, a spectrometer tailored for water vapor radiometry that utilizes passive wave guide filter banks. After developing a prototype and high altitude balloon payload, we demonstrated CubeSounder on commercial stratospheric balloon flights. We report on our design process, especially the simulation and fabrication of the custom millimeter-wave filter banks. We also report the initial results of the data collected from the balloon flights.

eess.SP

Forecasting the cross correlation of Terahertz Intensity Mapper [CII] line intensity maps with Euclid galaxies

We forecast that the Terahertz Intensity Mapper (TIM) cross-correlated with Euclid's Fornax deep field (EDF-F), TIM$\times$EDF-F, will detect the [CII]-galaxy cross-power spectrum at a median redshift of 1.1 with $\gtrsim 7 σ$ confidence. The Poisson component of the cross-power spectrum at $0.1 \leq k \leq 10$ hMpc$^{-1}$ (i.e. cross-shot noise) will be detected at $\gtrsim 3 σ$ in 4 bins spanning $0.5 < z< 1.7$. This measurement will constrain the mean [CII] specific intensity over half of cosmic history and assess the degree to which Euclid-selected galaxies account for the [CII] intensity observed by TIM. We find that TIM can detect the cross-power spectrum across a wide range of [CII] intensity models.

astro-ph.GA

Spaceflight KID Readout Electronics for PRIMA

We present the design and testing of a prototype multiplexing kinetic inductance detector (KID) readout electronics for the PRobe far-Infrared Mission for Astrophysics (PRIMA) space mission. PRIMA is a Probe-class astrophysics mission concept that will answer fundamental questions about the formation of planetary systems, the co-evolution of stars and supermassive black holes in galaxies, and the rise of heavy elements and dust over cosmic time. The readout electronics for PRIMA must be compatible with operation at Earth-Sun L2 and capable of multiplexing more than 1000 detectors over 2.5 GHz bandwidth while consuming around 30 W per readout chain. The electronics must also be capable of switching between the two instruments, which have different readout bands: the hyperspectral imager (PRIMAger, 2.6-4.9 GHz) and the spectrometer (FIRESS, 0.4-2.4 GHz). The PRIMA readout electronics use high-heritage SpaceCube digital electronics with a build-to-print SpaceCube Mini v3.0 board using a radiation-tolerant Kintex KU060 field programmable gate array (FPGA) and a custom high-speed digitizer board, along with RF electronics that provide filtering and power conditioning. We present the driving requirements for the system, as well as the hardware, firmware, software, and system-level design that meets those requirements.

astro-ph.IM

Readout of Microwave Kinetic Inductance Detector (MKID) Arrays for Habitable Worlds Observatory Using a Polyphase Filterbank Algorithm

The Habitable Worlds Observatory (HWO), a nextgeneration ultraviolet/optical/infrared space telescope, will require detector technologies capable of supporting substantially larger pixel-count arrays than those flown on previous missions. Microwave Kinetic Inductance Detectors (MKIDs) provide a scalable solution through microwave multiplexing and have already been demonstrated in balloon-borne instruments using Field-Programmable Gate Arrays (FPGAs) for real-time signal processing. A central element of MKID readout is the Polyphase Filter Bank (PFB) spectrometer, which converts digitized timedomain signals into finely resolved frequency channels for subsequent analysis. To meet the demands for broader bandwidths and higher spectral resolution driven by emerging science goals, efficient FPGA-based implementations of the PFB are essential. This work presents current results from a fixed-point digital design methodology for deploying the PFB architecture on spacequalified FPGAs. The approach emphasizes efficient resource utilization and numerical precision while satisfying stringent performance constraints, enabling scalable, high-resolution spectral processing for future space observatories and remote sensing applications.

astro-ph.IM

CCAT: Mod-Cam Cryogenic Performance and its Impact on 280 GHz KID Array Noise

The CCAT Observatory's Fred Young Submillimeter Telescope (FYST) is designed to observe submillimeter astronomical signals with high precision, using receivers fielding state-of-the-art kinetic inductance detector (KID) arrays. Mod-Cam, a first-light instrument for FYST, serves as a testbed for instrument module characterization, including detailed evaluation of thermal behavior under operating conditions prior to deploying modules in the larger Prime-Cam instrument. Prime-Cam is a first generation multi-band, wide-field camera for FYST, designed to field up to seven instrument modules and provide unprecedented sensitivity across a broad frequency range. We present results from two key laboratory characterizations: an "optically open" cooldown to validate the overall thermal performance of the cryostat, and a "cold load" cooldown to measure the effect of focal plane temperature stability on detector noise. During the optically open test, we achieved stable base temperatures of 1.5 K on the 1 K stage and 85 mK at the detector stage. In the cold load configuration, we measured a detector focal plane RMS temperature stability of 3.2e-5 K. From this stability measurement, we demonstrate that the equivalent power from focal plane thermal fluctuations is only 0.0040% of a 5pW incident photon power for aluminum detectors and 0.0023% for titanium-nitride detectors, a negligible level for CCAT science goals. This highlights the success of the cryogenic system design and thermal management.

astro-ph.IM

Optimized Observation Sequencing in Low-Earth Orbit with the SPHEREx Survey Planning Software

SPHEREx is a NASA infrared astronomy mission that launched on March 12th, 2025 and is operating successfully in low-Earth orbit (LEO). The mission is currently observing the entire sky in 102 spectral channels in four independent all-sky surveys and also achieves enhanced coverage in two deep fields. This data will resolve key science questions about the early universe, galaxy formation, and the origin of water and biogenic molecules. In this paper, we describe the survey planning software (SPS) that enables SPHEREx to observe efficiently while mitigating a range of operational challenges in LEO. Our optimal target selection algorithm achieves the required high coverage in both the All-Sky and Deep Surveys. The algorithm plans observations to stay within our time-varying allowable pointing zone, interleaves required data downlink passes, and mitigates outages due to the South Atlantic Anomaly and other events. As demonstrated by the sky coverage achieved in the first SPHEREx public data release, our approach is performing well in flight. The SPHEREx SPS is a key new capability that enables the mission to deliver groundbreaking science from LEO.

astro-ph.IM

Development of Space Qualified Signal Processing Readout Electronics for HabWorlds and Origins Space Telescope Detector and Arrays

The Habitable Worlds Observatory (HWO) -- a flagship ultraviolet/optical/infrared space telescope recommended by the National Academies' Pathways to Discovery in Astronomy and Astrophysics -- will require detector technologies capable of supporting significantly larger pixel-count arrays than previous missions. Microwave Kinetic Inductance Detectors (MKIDs), naturally suited to microwave multiplexing readout, are already in use across several balloon-borne missions with FPGA based systems. To transition this capability to space, we are developing a radiation-hardened detector readout system that builds directly on the technical and environmental requirements defined by the PRIMA mission. PRIMA serves as a critical pathfinder, informing the radiation tolerance, resource constraints, and on-board processing capabilities needed for HWO. In this work, we present our current results on algorithm implementation, hardware architecture, and firmware development using the radiation-hardened AMD Kintex Ultrascale FPGA, aligning with PRIMA's stringent specifications to ensure compatibility with future space-based observatories like HWO.

astro-ph.IM

Integrated Galaxy Light from Stacking $10^5$ Random Pointings in the Dark Energy Survey Data

We present a new technique for measuring the integrated galaxy light (IGL) with stacked image data from the Dark Energy Survey (DES). We extract $1\times1$ arcminute cutouts from nearly 100,000 randomly selected positions in the g, r, i, z, and Y bands from the DES data release 2 (DR2) maps. We generate source catalogs and masks for each cutout and the images are subsequently stacked to generate deep images of the sky both with and without sources. The IGL is then calculated by taking the difference in average brightness between stacks that contain galaxies and stacks in which galaxies have been masked. We find IGL values of $g = 4.27 \pm 0.28, r = 6.97 \pm 0.42, i = 8.66 \pm 0.53, z = 10.16 \pm 0.7,$ and $Y = 13.78 \pm 2.35$ nW/m$^2$/sr. These measurements, which require no foreground estimation or removal, are in agreement with previously reported IGL values derived from galaxy number counts and other methods. This stacking technique reduces the sensitivity to diffuse local backgrounds but is not sensitive to large-scale diffuse extragalactic background light.

astro-ph.CO

A Millimeter-Wave Photometric Camera for Long-Range Imaging Through Optical Obscurants Using Kinetic Inductance Detectors

Passive imaging through optical obscurants is a promising application for mm-wave sensing. We have thus developed the Superconducting Kinetic Inductance Passive Radiometer (SKIPR), a 150 GHz polarization-sensitive photometric camera optimized for terrestrial imaging using a focal plane array with 3,840 kinetic inductance detectors (KIDs). We present a full description of the instrument design, with a particular emphasis on the cryogenic system based on a Gifford-McMahon cryocooler with a two-stage Adiabatic Demagnetization Refrigerator and a dedicated 1.59 m crossed Dragone telescope with an altitude/azimuth mount. We include a detailed lab-based characterization of the KIDs, which results in a determination of their superconducting resonator parameters and optical properties. We also present in situ measurements from the telescope, including point-spread functions and noise characterization. In sum, we find that SKIPR performs as expected, providing diffraction-limited imaging with detector noise performance set by the random arrivals of photons from the ambient background. There is minimal variation in detector characteristics over the full SKIPR focal plane array, and the overall detector yield is 92 per cent.

astro-ph.IM

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.

astro-ph.IM

SPHEREx: NASA's Near-Infrared Spectrophotmetric All-Sky Survey

SPHEREx, the Spectro-Photometer for the History of the Universe, Epoch of Reionization, and ices Explorer, is a NASA MIDEX mission planned for launch in 2024. SPHEREx will carry out the first all-sky spectral survey at wavelengths between 0.75 micron and 5 micron with spectral resolving power ~40 between 0.75 and 3.8 micron and ~120 between 3.8 and 5 micron At the end of its two-year mission, SPHEREx will provide 0.75-to-5 micron spectra of each 6.2"x6.2" pixel on the sky - 14 billion spectra in all. This paper updates an earlier description of SPHEREx presenting changes made during the mission's Preliminary Design Phase, including a discussion of instrument integration and test and a summary of the data processing, analysis, and distribution plans.

astro-ph.IM

CONCERTO: instrument and status

CONCERTO (CarbON CII line in post-rEionization and ReionizaTiOn) is a low-resolution Fourier transform spectrometer dedicated to the study of star-forming galaxies and clusters of galaxies in the transparent millimeter windows from the ground. It is characterized by a wide instantaneous 18.6 arcmin field of view, operates at 130-310 GHz, and was installed on the 12-meter Atacama Pathfinder Experiment (APEX) telescope at 5100 m above sea level. CONCERTO's double focal planes host two arrays of 2152 kinetic inductance detectors and represent a pioneering instrument to meet a state-of-the-art scientific challenge. This paper introduces the CONCERTO instrument and explains its status, shows the first CONCERTO spectral maps of Orion, and describes the perspectives of the project.

astro-ph.IM

The Thermal Sunyaev-Zel'dovich Effect from Massive, Quiescent 0.5 $\leq$ z $\leq$ 1.5 Galaxies

We use combined South Pole Telescope (SPT)+Planck temperature maps to analyze the circumgalactic medium (CGM) encompassing 138,235 massive, quiescent 0.5 $\leq$ z $\leq$ 1.5 galaxies selected from data from the Dark Energy Survey (DES) and Wide-Field Infrared Survey Explorer (WISE). Images centered on these galaxies were cut from the 1.85 arcmin resolution maps with frequency bands at 95, 150, and 220 GHz. The images were stacked, filtered, and fit with a gray-body dust model to isolate the thermal Sunyaev-Zel'dovich (tSZ) signal, which is proportional to the total energy contained in the CGM of the galaxies. We separate these $M_{\star} = 10^{10.9} M_\odot$ - $10^{12} M_\odot$ galaxies into 0.1 dex stellar mass bins, detecting tSZ per bin up to $5.6σ$ and a total signal-to-noise ratio of $10.1σ$. We also detect dust with an overall signal-to-noise ratio of $9.8σ$, which overwhelms the tSZ at 150GHz more than in other lower-redshift studies. We correct for the $0.16$ dex uncertainty in the stellar mass measurements by parameter fitting for an unconvolved power-law energy-mass relation, $E_{\rm therm} = E_{\rm therm,peak} \left(M_\star/M_{\star,{\rm peak}} \right)^α$, with the peak stellar mass distribution of our selected galaxies defined as $M_{\star,{\rm peak}}= 2.3 \times 10^{11} M_\odot$. This yields an $E_{\rm therm,peak}= 5.98_{-1.00}^{+1.02} \times 10^{60}$ erg and $α=3.77_{-0.74}^{+0.60}$. These are consistent with $z \approx 0$ observations and within the limits of moderate models of active galactic nuclei (AGN) feedback. We also compute the radial profile of our full sample, which is similar to that recently measured at lower-redshift by Schaan et al. (2021).

astro-ph.CO