Searcharxiv⌕ Search

arXiv subjects

Philipp M. John

Publications and source records attributed to Philipp M. John.

2 recordsLinked to original sources

Epitaxial integration of GaN $μ$-platelets and thin films on metallic TiN using a hybrid approach

We demonstrate the synthesis of epitaxial, self-organized GaN $μ$-platelets on metallic TiN thin films. To this end, we first nucleate self-assembled GaN nanowires with number densities between 0.01 to 300 $μm^{-2}$ by molecular beam epitaxy. Subsequent overgrowth of these seed nanowires by metal-organic vapor phase epitaxy yields GaN $μ$-platelets with corresponding number densities. The platelets exhibit N-polarity and form an ohmic contact to the metallic TiN substrate. By adjusting the growth conditions during the metal-organic vapor phase epitaxy, particularly the carrier gas and precursor ratio, the morphology of the GaN can be controlled across a broad range. Growth under N$_{2}$ carrier gas and with a 1:1 NH$_{3}$/trimethylgallium precursor flow ratio results in platelet ensembles with broad diameter and height distributions. In contrast, employing an N$_{2}$/H$_{2}$ carrier gas mixture promotes the formation of more homogeneous ensembles with narrower size distributions around a diameter of $\approx$2 $μm$. Finally, N-rich growth conditions under H$_{2}$ carrier gas enhance lateral growth, leading to the formation of coalesced GaN layers. GaN grown under these latter conditions exhibits strong near-band-edge emission, accompanied by only weak deep-level luminescence at room temperature.

cond-mat.mtrl-sci↗

Molecular Beam Epitaxy of Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N Nanowires: Towards Group-III Nitride Piezoelectric Nanogenerators with Enhanced Response

We study the molecular beam epitaxy of self-assembled Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires on conductive TiN layers and demonstrate their application in piezoelectric nanogenerators. Wurtzite Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires with uniform Sc incorporation are grown across a wide composition range (0<x<0.35). At substrate temperatures below 700 $^\circ{}$C, these nanowires exhibit an inversely tapered morphology, whereas higher temperatures favor the nucleation of additional branches due to a phase separation of Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N into wurtzite AlN and rock-salt ScN. Phase-pure Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N nanowires are integrated into vertical nanogenerators, where the metallic TiN substrate serves as bottom electrode. The fabricated polymer-nanowire composite devices achieve effective piezoelectric charge coefficients of up to 8.5 pC N$^{-1}$ at x=0.32, thus exceeding the piezoelectric response of bulk AlN by nearly a factor of two. Although the charge response remains lower compared to Al$\mathrm{_{1-x}}$Sc$\mathrm{_{x}}$N thin films, the reduced effective dielectric permittivity of the nanowire-polymer composites compensates the reduction in piezoelectric charge coefficient, eventually yielding a higher voltage response and comparable energy harvesting efficiency. Finally, effective medium modeling reveals that the device architecture is the primary factor limiting performance, providing general design principles for highly efficient nanowire-based piezoelectric energy harvesters.

cond-mat.mtrl-sci↗