arXiv subjects

Philipp Pirro

Publications and source records attributed to Philipp Pirro.

At least 91 records · Page 5Linked to original sources

arXiv2019

Integrated magnonic half-adder

Spin waves and their quanta magnons open up a promising branch of high-speed and low-power information processing. Several important milestones were achieved recently in the realization of separate magnonic data processing units including logic gates, a magnon transistor and units for non-Boolean computing. Nevertheless, the realization of an integrated magnonic circuit consisting of at least two logic gates and suitable for further integration is still an unresolved challenge. Here we demonstrate such an integrated circuit numerically on the example of a magnonic half-adder. Its key element is a nonlinear directional coupler serving as combined XOR and AND logic gate that utilizes the dependence of the spin wave dispersion on its amplitude. The circuit constitutes of only three planar nano-waveguides and processes all information within the magnon domain. Benchmarking of the proposed device is performed showing the potential for sub-aJ energy consumption per operation.

physics.app-ph↗

arXiv2019

Opportunities and challenges for spintronics in the microelectronic industry

Spin-based electronics has evolved into a major field of research that broadly encompasses different classes of materials, magnetic systems, and devices. This review describes recent advances in spintronics that have the potential to impact key areas of information technology and microelectronics. We identify four main axes of research: nonvolatile memories, magnetic sensors, microwave devices, and beyond-CMOS logic. We discuss state-of-the-art developments in these areas as well as opportunities and challenges that will have to be met, both at the device and system level, in order to integrate novel spintronic functionalities and materials in mainstream microelectronic platforms.

physics.app-ph↗

arXiv2019

Roadmap on STIRAP applications

STIRAP (Stimulated Raman Adiabatic Passage) is a powerful laser-based method, usually involving two photons, for efficient and selective transfer of population between quantum states. A particularly interesting feature is the fact that the coupling between the initial and the final quantum states is via an intermediate state even though the lifetime of the latter can be much shorter than the interaction time with the laser radiation. Nevertheless, spontaneous emission from the intermediate state is prevented by quantum interference. Maintaining the coherence between the initial and final state throughout the transfer process is crucial. STIRAP was initially developed with applications in chemical dynamics in mind. That is why the original paper of 1990 was published in The Journal of Chemical Physics. However, as of about the year 2000, the unique capabilities of STIRAP and its robustness with respect to small variations of some experimental parameters stimulated many researchers to apply the scheme in a variety of other fields of physics. The successes of these efforts are documented in this collection of articles.

quant-ph↗

arXiv2019

Frequency-Division Multiplexing in Magnonic Logic Networks Based on Caustic-Like Spin-Wave Beams

Wave-based data processing by spin waves and their quanta, magnons, is a promising technique to overcome the challenges which CMOS-based logic networks are facing nowadays. The advantage of these quasi-particles lies in their potential for the realization of energy efficient devices on the micro- to nanometer scale due to their charge-less propagation in magnetic materials. In this paper, the frequency dependence of the propagation direction of caustic-like spin-wave beams in microstructured ferromagnets is studied by micromagnetic simulations. Based on the observed alteration of the propagation angle, an approach to spatially combine and separate spin-wave signals of different frequencies is demonstrated. The presented magnetic structure constitutes a prototype design of a passive circuit enabling frequency-division multiplexing in magnonic logic networks. It is verified that spin-wave signals of different frequencies can be transmitted through the device simultaneously without any interaction or creation of spurious signals. Due to the wave-based approach of computing in magnonic networks, the technique of frequency-division multiplexing can be the basis for parallel data processing in single magnonic devices, enabling the multiplication of the data throughput.

physics.app-ph↗

arXiv2019

Topological characterization of classical waves: the topological origin of magnetostatic surface spin waves

We propose a topological characterization of Hamiltonians describing classical waves. Applying it to the magnetostatic surface spin waves that are important in spintronics applications, we settle the speculation over their topological origin. For a class of classical systems that includes spin waves driven by dipole-dipole interactions, we show that the topology is characterized by vortex lines in the Brillouin zone in such a way that the symplectic structure of Hamiltonian mechanics plays an essential role. We define winding numbers around these vortex lines and identify them to be the bulk topological invariants for a class of semimetals. Exploiting the bulk-edge correspondence appropriately reformulated for these classical waves, we predict that surface modes appear but not in a gap of the bulk frequency spectrum. This feature, consistent with the magnetostatic surface spin waves, indicates a broader realm of topological phases of matter beyond spectrally gapped ones.

cond-mat.mes-hall↗

arXiv2019

Nanoscale spin-wave wake-up receiver

We present the concept of a passive spin-wave device which is able to distinguish different radio-frequency pulse trains and validate its functionality using micromagnetic simulations. The information is coded in the phase of the individual pulses which are transformed into spin-wave packets. The device splits every incoming packet into two arms, one of which is coupled to a magnonic ring which introduces a well-defined time delay and phase shift. Since the time delay is matched to the pulse repetition rate, adjacent packets interfere in a combiner which makes it possible to distinguish simple pulse train patterns by the read-out of the time-integrated spin-wave intensity in the output. Due to its passive construction, this device may serve as an energy-efficient wake-up receiver used to activate the main receiver circuit in power critical IoT applications.

physics.app-ph↗

arXiv2018

Optical determination of the exchange stiffness constant in an iron garnet

Brillouin light scattering measurements were performed in the backscattering geometry on a Bi-substituted rare earth iron garnet. We observed two different peaks, one attributed to a surface spin wave in the dipole-exchange regime. The other is referred to as a backscattering magnon mode, because the incident light in this case is scattered backward by exchange-dominated spin wave inside the material. We propose a method to estimate the exchange stiffness constant from the frequency of the backscattering magnon mode. The obtained value is comparable with the previously reported values for Y$ _3 $Fe$ _5 $O$ _{12} $.

physics.optics↗

arXiv2018

An analog magnon adder for all-magnonic neurons

Spin-waves are excellent data carriers with a perspective use in neuronal networks: Their lifetime gives the spin-wave system an intrinsic memory, they feature strong nonlinearity, and they can be guided and steered through extended magnonic networks. In this work, we present a magnon adder that integrates over incoming spin-wave pulses in an analog fashion. Such an adder is a linear prequel to a magnonic neuron, which would integrate over the incoming pulses until a certain nonlinearity is reached. In this work, the adder is realized by a resonator in combination with a parametric amplifier which is just compensating the resonator losses.

cond-mat.mes-hall↗

arXiv2018

Determination of the spin Hall angle in single-crystalline Pt films from spin pumping experiments

We report on the determination of the spin Hall angle and the identification of the role of the interface roughness for the inverse spin Hall effect (ISHE) in ultra-clean, defect-reduced epitaxial Pt films. By applying vector network analyzer ferromagnetic resonance spectroscopy to a series of single crystalline Fe (12 nm) /Pt (t$_\text{Pt}$) bilayers we determine the real part of the spin mixing conductance $(4.4\:\pm\:0.2)\cdot 10^{19}\: $m$^{-2}$ and reveal a very small spin diffusion length in the epitaxial Pt $(1.1\:\pm\:0.1)$ nm film. We investigate the spin pumping and ISHE in a stripe microstucture excited by a microwave coplanar waveguide (CPW) antenna. By using their different angular dependencies, we distinguish between spin rectification effects and the inverse spin Hall effect. The relatively large value of the spin Hall angle $(5.7 \pm 1.4)\: \% $ hints that interface engineering by epitaxially grown non-magnetic materials can increase the spin-to-charge current conversion efficiency.

cond-mat.mes-hall↗

arXiv2018

Realization of a spin wave switch based on the Spin-Transfer-Torque effect

We investigate the amplification of externally excited spin waves via the Spin-Transfer-Torque (STT) effect in combination with the Spin-Hall-Effect (SHE) employing short current pulses. The results reveal that, in the case of an overcompensation of the spin wave damping, a strong nonlinear shift of the spin wave frequency spectrum occurs. In particular, this shift affects the spin wave amplification using the SHE-STT effect. In contrast, this effect allows for the realization of a spin wave switch. By determining the corresponding working point, an efficient spin wave excitation is only possible in the presence of the SHE-STT effect yielding an increased spin wave intensity of a factor of 20 compared to the absence of the SHE-STT effect.

cond-mat.mes-hall↗

arXiv2017

Adiabatic Control of Spin-Wave Propagation using Magnetisation Gradients

Spin waves are of large interest as data carriers for future logic devices. However, due to the strong anisotropic dispersion relation of dipolar spin-waves in in-plane magnetised films the realisation of two-dimensional information transport remains a challenge. Bending of the energy flow is prohibited since energy and momentum of spin waves cannot be conserved while changing the direction of wave propagation. Thus, non-linear or non-stationary mechanisms are usually employed. Here, we propose to use reconfigurable laser-induced magnetisation gradients to break the system's translational symmetry. The resulting changes in the magnetisation shift the dispersion relations locally and allow for operating with different spin-wave modes at the same frequency. Spin-wave momentum is first transformed via refraction at the edge of the magnetisation gradient region and then adiabatically modified inside it. Along these lines the spin-wave propagation direction can be controlled in a broad frequency range with high efficiency.

cond-mat.other↗

arXiv2017

Experimental investigation of the temperature-dependent magnon density and its influence on studies of spin-transfer-torque-driven systems

We present the temperature dependence of the thermal magnon density in a thin ferromagnetic layer. By employing Brillouin light scattering and varying the temperature, an increase of the magnon density accompanied by a lowering of the spin-wave frequency is observed with increasing temperature. The magnon density follows the temperature according to the Bose-Einstein distribution function which leads to an approximately linear dependency. In addition, the influence of this effect in spin-transfer-torque-driven systems is presented. In particular, the increase in the magnon density with temperature sets the limit for a suppression of magnons in charge current-driven systems. Hence, the maximum possible suppression of thermal magnons occurs at a finite current.

cond-mat.mes-hall↗

arXiv2017

Reconfigurable nano-scale spin-wave directional coupler

A spin-wave (SW) directional coupler comprised of two laterally parallel nano-scale dipolarly-coupled SW waveguides is proposed and studied using micromagnetic simulations and analytical theory. The energy of a SW excited in one of the waveguides in the course of propagation is periodically transferred to the other waveguide and back, and the spatial half-period of this transfer is defined as the coupling length. The coupling length is determined by the dipolar coupling between the waveguides, and the fraction of the SW energy transferred to the other waveguide at the device output can be varied with the SW frequency, bias magnetic field, and relative orientation of the waveguide's static magnetizations. The proposed design of a directional coupler can be used in digital computing-oriented magnonics as a connector (multiplexer) of magnonic conduits without a direct contact, or in the analog microwave signal processing as a reconfigurable nano-scale power divider and/or frequency separator.

cond-mat.mes-hall↗

arXiv2016

Creation of uni-directional spin-wave emitters by utilizing interfacial Dzyaloshinskii-Moriya interaction

We present an analytic and numerical study of the creation of an uni-directional spin-wave emission in ultra-thin ferromagnetic films sandwiched in an asymmetric layer stack. For this we extend the analytical description of spin waves in spin-wave waveguides by the incorporation of the influence of the interfacial Dzyaloshinskii-Moriya interaction on the spin-wave propagation. By exploring the model system Ni$_{81}$Fe$_{19}$/Pt we show that it is possible to achieve an uni-directional spin-wave emission by combining wave-vector selective excitation sources with the frequency splitting which arises from interfacial Dzyaloshinskii-Moriya interaction. Hereby we focus on device feature sizes and spin-wave wavelengths compatible with state-of-the art excitation and detection schemes. We demonstrate that the optimum operation conditions for the non-reciprocal emission can be predicted using the presented analytical formalism

cond-mat.mes-hall↗

arXiv2016

Temporal evolution of auto-oscillations in a YIG/Pt microdisc driven by pulsed spin Hall effect-induced spin-transfer torque

The temporal evolution of pulsed Spin Hall Effect - Spin Transfer Torque (SHE-STT) driven auto-oscillations in a Yttrium Iron Garnet (YIG) / platinum (Pt) microdisc is studied experimentally using time-resolved Brillouin Light Scattering (BLS) spectroscopy. It is demonstrated that the frequency of the auto-oscillations is different in the center and at the edge of the investigated disc that is related to the simultaneous STT excitation of a bullet and a non-localized spin-wave mode. Furthermore, the magnetization precession intensity is found to saturate on a time scale of 20 ns or longer, depending on the current density. For this reason, our findings suggest that a proper ratio between the current and the pulse duration is of crucial importance for future STT-based devices.

cond-mat.mes-hall↗

arXiv2016

Parallel pumping for magnon spintronics: Amplification and manipulation of magnon spin currents on the micron-scale

Magnonics and magnon spintronics aim at the utilization of spin waves and magnons, their quanta, for the construction of wave-based logic networks via the generation of pure all-magnon spin currents and their interfacing with electrical charge transport. The promise of efficient parallel data processing and low power consumption renders this field one of the most promising research areas in spintronics. In this context, the process of parallel parametric amplification, i.e., the conversion of microwave photons into magnons at one half of the microwave frequency, has proven to be a versatile tool. Its beneficial and unique properties, such as frequency and mode-selectivity, the possibility to excite spin waves in a wide wavevector range and the creation of phase-correlated wave pairs, render it one of the key methods of spin-wave generation and amplification. The application of parallel parametric amplification to micro- and nanostructures is an important step towards the realization of magnonic networks. This is motivated not only by the fact that amplifiers are an important tool for the construction of any extended logic network but also by the unique properties of parallel parametric amplification, such as a phase-dependent amplification. Recently, the successful application of parallel parametric amplification to metallic microstructures has been reported. It has been demonstrated that parametric amplification provides an excellent tool to generate and to amplify spin waves in these systems. In particular, the amplification greatly benefits from the discreteness of the spin-wave spectra. This opens up new, interesting routes of spin-wave amplification and manipulation. In this Review, we give an overview over the recent developments and achievements in this field.

cond-mat.mes-hall↗

arXiv2016

Perpendicularly magnetized CoFeB multilayers with tunable interlayer exchange for synthetic ferrimagnets

A study of the multilayer system MgO/CoFeB(1.1nm)/Ta($t$)/CoFeB(0.8nm)/MgO is presented, where the two CoFeB layers are separated by a Ta interlayer of varying thickness $t$. The magnetization properties deduced from complementary techniques such as superconducting quantum interference magnetometry, ferromagnetic resonance frequency measurements and Brillouin light scattering spectroscopy can be tuned by changing the Ta thickness between $t$=0.25 nm, 0.5 nm and 0.75 nm. For $t$=0.5 nm, a ferromagnetic coupling is observed, whereas for t=0.75 nm, the antiferromagnetic coupling needed to construct a synthetic ferrimagnet is realized. In the later case, the shape of magnetic domain walls between two ferrimagnetic alignments or between a ferro- and a ferrimagnetic alignment is very different. This behavior can be interpreted as a result of the change in dipolar as well as interlayer exchange energy and domain wall pinning, which is an important conclusion for the realization of data storage devices based on synthetic ferri- and antiferromagnets.

cond-mat.mtrl-sci↗

arXiv2015

Spin-wave logic devices based on isotropic forward volume magneto-static waves

We propose the utilization of isotropic forward volume magneto-static spin waves in modern wave-based logic devices and suggest a concrete design for a spin-wave majority gate operating with these waves. We demonstrate by numerical simulations that the proposed out-of-plane magnetized majority gate overcomes the limitations of anisotropic in-plane magnetized majority gates due to the high spin-wave transmission through the gate, which enables a reduced energy consumption of these devices. Moreover, the functionality of the out-of-plane majority gate is increased due to the lack of parasitic generation of short-wavelength exchange spin waves.

cond-mat.mes-hall↗