SearcharxivSearch

arXiv subjects

Philipp Roloff

Publications and source records attributed to Philipp Roloff.

At least 19 recordsLinked to original sources

Development of Ultrafast and Radiation-Hard GAGG for the Next-Generation of High-Energy Physics Calorimeters

The evolution of High Energy Physics (HEP) toward future collider experiments with High Luminosity (HL), such as the HL-LHC, requires the development of scintillating materials that combine high density, excellent radiation hardness and an ultrafast response. While Cerium-doped Gadolinium Aluminum Gallium Garnet (GAGG:Ce) offers a very high light yield and resilience to irradiation, its typical decay time of approximately 50-60 ns may lead to pile-up effects in high-rate environments. In this paper, we report on the development and multi-stage characterization of various accelerated GAGG compositions optimized for timing performance and grown by Crytur. By taking advantage of divalent co-doping to engineer the scintillation kinetics, we achieved an effective decay time (tau_d,eff) down to 5.5 ns while maintaining a competitive light yield of several thousand photons per MeV. Laboratory characterization demonstrates that the time resolution under gamma-ray excitation is comparable to commercial GAGG, while the time resolution measured with 120 GeV pions reaches performance levels comparable to state-of-the-art LYSO:Ce,Ca. After a 1 MGy proton irradiation campaign the material retains most of its optical transmission. The results confirm that this ultrafast GAGG composition is a viable candidate for the next generation of HEP calorimetry and timing detectors.

physics.ins-det

Lepton Flavor Violating Higgs decays at the Compact Linear Collider

Lepton flavor violating Higgs decays could appear in scenarios beyond the Standard Model of particle physics. In this article, we study the sensitivity of a future Compact Linear Collider (CLIC) to such processes, namely, $h\rightarrow e\mu$, $h\rightarrow\tau\mu$, and $h\rightarrow e\tau$. In the absence of any observation, 95\% CL\ upper limits in the region of $10^{-4}$ to $10^{-5}$ could be placed on the branching fractions of these processes, assuming integrated luminosities of $4$\,ab$^{-1}$ at $\sqrt{s}=1.4$ TeV and $5$\,ab$^{-1}$ at $\sqrt{s}=3$ TeV.

hep-ph

The Compact Linear e$^+$e$^-$ Collider (CLIC)

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e$^+$e$^-$ collider studied by the international CLIC and CLICdp collaborations. CLIC uses a two-beam acceleration scheme, in which normal-conducting high-gradient 12 GHz accelerating structures are powered via a high-current drive beam. CLIC is foreseen to be built and operated in stages. The initial 380 GeV stage, with a site length of 11 km, optimally combines the exploration of Higgs and top-quark physics, including a top threshold scan near 350 GeV. A higher-energy stage, still using the initial single drive-beam complex, can be optimised for any energy up to 2 TeV. Parameters are presented in detail for a 1.5 TeV stage, with a site length of 29 km. Since the 2018 ESPPU reporting, significant effort was invested in CLIC accelerator optimisation, technology developments and system tests, including collaboration with new-generation light sources and free-electron lasers. CLIC implementation aspects at CERN have covered detailed studies of civil engineering, electrical networks, cooling and ventilation, scheduling, and costing. The CLIC baseline at 380 GeV is now 100 Hz operation, with a luminosity of 4.5$\times 10^{34}$ cm$^{-2}$s$^{-1}$ and a power consumption of 166 MW. Compared to the 2018 design, this gives three times higher luminosity-per-power. The new baseline has two beam-delivery systems, allowing for two detectors operating in parallel. The cost estimate of the 380 GeV baseline is approximately 7.2 billion CHF. The construction of the first CLIC energy stage could start as early as ~2034/35 with first beams following a decade later. This report summarises the CLIC project, its implementation and running scenarios, with emphasis on new developments and recent progress. It concludes with an update on the CLIC detector studies and on the physics potential in light of the improved accelerator performance.

physics.acc-ph

Focus topics for the ECFA study on Higgs / Top / EW factories

In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.

hep-ph

Report of the Topical Group on Electroweak Precision Physics and Constraining New Physics for Snowmass 2021

The precise measurement of physics observables and the test of their consistency within the standard model (SM) are an invaluable approach, complemented by direct searches for new particles, to determine the existence of physics beyond the standard model (BSM). Studies of massive electroweak gauge bosons (W and Z bosons) are a promising target for indirect BSM searches, since the interactions of photons and gluons are strongly constrained by the unbroken gauge symmetries. They can be divided into two categories: (a) Fermion scattering processes mediated by s- or t-channel W/Z bosons, also known as electroweak precision measurements; and (b) multi-boson processes, which include production of two or more vector bosons in fermion-antifermion annihilation, as well as vector boson scattering (VBS) processes. The latter categories can test modifications of gauge-boson self-interactions, and the sensitivity is typically improved with increased collision energy. This report evaluates the achievable precision of a range of future experiments, which depend on the statistics of the collected data sample, the experimental and theoretical systematic uncertainties, and their correlations. In addition it presents a combined interpretation of these results, together with similar studies in the Higgs and top sector, in the Standard Model effective field theory (SMEFT) framework. This framework provides a model-independent prescription to put generic constraints on new physics and to study and combine large sets of experimental observables, assuming that the new physics scales are significantly higher than the EW scale.

hep-ph

Performance of a spaghetti calorimeter prototype with tungsten absorber and garnet crystal fibres

A spaghetti calorimeter (SPACAL) prototype with scintillating crystal fibres was assembled and tested with electron beams of energy from 1 to 5 GeV. The prototype comprised radiation-hard Cerium-doped Gd$_3$Al$_2$Ga$_3$O$_{12}$ (GAGG:Ce) and Y$_3$Al$_5$O$_{12}$ (YAG:Ce) embedded in a pure tungsten absorber. The energy resolution was studied as a function of the incidence angle of the beam and found to be of the order of $10\% / \sqrt{E} \oplus1\%$, in line with the LHCb Shashlik technology. The time resolution was measured with metal channel dynodes photomultipliers placed in contact with the fibres or coupled via a light guide, additionally testing an optical tape to glue the components. Time resolution of a few tens of picosecond was achieved for all the energies reaching down to (18.5 $\pm$ 0.2) ps at 5 GeV.

physics.ins-det

Light-by-Light Scattering at Future $e^+e^-$ Colliders

We study the sensitivity of possible CLIC and FCC-ee measurements of light-by-light scattering to old and new physics, including the Heisenberg-Euler Lagrangian in the Standard Model with possible contributions from loops of additional charged particles or magnetic monopoles, the Born-Infeld extension of QED, and effective dimension-8 operators involving four electromagnetic field strengths as could appear in the Standard Model Effective Field Theory. We find that FCC-ee measurements at 365 GeV and CLIC measurements at 350 GeV would be sensitive to new physics scales of half a TeV in the dimension-8 operator coefficients, and that CLIC measurements at 1.4 TeV or 3 TeV would be sensitive to new physics scales {$\sim 2$ TeV or 5 TeV} at 95\% CL, corresponding to probing loops of new particles with masses up to $\sim 3.7$ TeV {for large charges and/or multiple species}. Within Born-Infeld theory, the $95\%$ CL sensitivities would range from $\sim 300$ GeV to 1.3 or 2.8 TeV for the high-energy CLIC options. Measurements of light-by-light scattering would not exclude monopole production at FCC-hh, except in the context of Born-Infeld theory.

hep-ph

Double Higgs boson production and Higgs self-coupling extraction at CLIC

The Compact Linear Collider (CLIC) is a future electron-positron collider that will allow measurement of the trilinear Higgs self-coupling in double Higgs boson events produced at its high-energy stages with collision energies of $\sqrt{s}$ = 1.5 and 3 TeV. The sensitivity to the Higgs self-coupling is driven by the measurements of the cross section and the invariant mass distribution of the Higgs-boson pair in the W-boson fusion process, e$^+$e$^-\to$HH$ν_e \barν_e$. It is enhanced by including the cross-section measurement of ZHH production at 1.5 TeV. The expected sensitivity of CLIC for Higgs pair production through W-boson fusion is studied for the decay channels bbbb and bbWW using full detector simulation including all relevant backgrounds. With an integrated luminosity of $\mathcal{L}$ = 5 ab$^{-1}$ at $\sqrt{s}$ = 3 TeV, CLIC will be able to measure the trilinear Higgs self-coupling with a relative uncertainty of $-8\,\%$ and $+11\,\%$ at $68\,\%$ C.L., assuming the Standard Model.

hep-ex

CLIC Higgs coupling prospects with a longer first energy stage

One of the most attractive features of a linear collider is the ability to extend its energy reach in stages, and to adapt the running plan flexibly in terms of maximum centre-of-mass energy and time spent at each stage. The baseline luminosity staging scenario for CLIC is well-established, and has been used to obtain sensitivity projections for Standard Model measurements and Beyond Standard Model scenarios. Here, as an exercise to illustrate what could be obtained from an alternative running scenario, Higgs coupling sensitivities are presented for the case where more data is collected at the initial stage $\sqrt{s}=380$ GeV, before proceeding to the higher energy stages of $\sqrt{s}=1.5$ and 3 TeV. This could be achieved through running for longer, or operating the collider at an increased repetition rate of 100 Hz at the initial stage, or a combination of both.

hep-ex

All-hadronic HZ production at high energy at 3 TeV CLIC

In this note the $\mathrm{HZ}$ production in the all-hadronic final state in $\mathrm{e}^{+}\mathrm{e}^{-}$ collisions at the Compact Linear Collider is studied at the 3 TeV stage. At high energies, the events have an experimental signature of back-to-back approximately mono-energetic large jets. Each of these jets contains two sub-jets and substructure compatible with two original objects. The study is based on full simulation including the detector response, as well as the presence of beam-induced background from $γγ\to\mathrm{hadrons}$. Results on the measurement of the total $\mathrm{HZ}$ cross section are given, and the potential to measure angular asymmetry observables is discussed.

hep-ex

A DELPHES card for the CLIC detector

The Compact Linear Collider, CLIC, is a multi-TeV electron-positron collider proposed for construction at CERN. A detector model, CLICdet, that is suited for the experimental conditions at CLIC and is based on realistic performance, has been developed. This paper describes the implementation of CLICdet in a fast simulation tool for particle physics collider experiments, DELPHES. The geometry of the detector concept as well as performance parameters extracted from full simulation studies are implemented in DELPHES parameter cards for CLICdet. Jet reconstruction for electron-positron colliders is added to the DELPHES analysis chain. Parameters for using DELPHES to simulate the detector effects of CLICdet are provided in three parameter cards, one for each energy stage of CLIC. The effects of beam-induced background at the higher-energy stages of CLIC are also incorporated. The results from the fast simulation with DELPHES are validated with respect to full detector simulation in a number of relevant processes.

hep-ex

A detector for CLIC: main parameters and performance

Together with the recent CLIC detector model CLICdet a new software suite was introduced for the simulation and reconstruction of events in this detector. This note gives a brief introduction to CLICdet and describes the CLIC experimental conditions at 380 GeV and 3 TeV, including beam-induced backgrounds. The simulation and reconstruction tools are introduced, and the physics performance obtained is described in terms of single particles, particles in jets, jet energy resolution and flavour tagging. The performance of the very forward electromagnetic calorimeters is also discussed.

physics.ins-det

Updated CLIC luminosity staging baseline and Higgs coupling prospects

An updated luminosity staging baseline for CLIC is presented. Assuming accelerator ramp-up and up-time scenarios that are harmonized with those of other potential future colliders, CLIC will deliver 1 ab^-1 at sqrt(s)=380 GeV, 2.5 ab^-1 at sqrt(s)=1.5 TeV, and 5 ab^-1 at sqrt(s)=3 TeV. The complete programme will take 25-30 years. The baseline scenario for luminosity sharing between the two electron beam polarisation states is also discussed. Updated Higgs coupling sensitivities are given for this new luminosity staging baseline.

hep-ex

Dimension-6 Operator Analysis of the CLIC Sensitivity to New Physics

We estimate the possible accuracies of measurements at the proposed CLIC $e^+e^-$ collider of Higgs and $W^+W^-$ production at centre-of-mass energies up to 3TeV, incorporating also Higgsstrahlung projections at higher energies that had not been considered previously, and use them to explore the prospective CLIC sensitivities to decoupled new physics. We present the resulting constraints on the Wilson coefficients of dimension-6 operators in a model-independent approach based on the Standard Model effective field theory (SM EFT). The higher centre-of-mass energy of CLIC, compared to other projects such as the ILC and CEPC, gives it greater sensitivity to the coefficients of some of the operators we study. We find that CLIC Higgs measurements may be sensitive to new physics scales $Λ= \mathcal{O}(10)$TeV for individual operators, reduced to $\mathcal{O}(1)$ TeV sensitivity for a global fit marginalising over the coefficients of all contributing operators. We give some examples of the corresponding prospective constraints on specific scenarios for physics beyond the SM, including stop quarks and the dilaton/radion.

hep-ph

Full simulation study of the top Yukawa coupling at the ILC at $\sqrt{s}$ = 1 TeV

We present a study of the expected precision for measurement of the top Yukawa coupling, yt, in e+e- collisions at a center-of-mass energy of 1 TeV and assuming a beam polarization of P (e-, e+) = (-0.8,+0.2). Independent analyses of ttH final states containing at least six hadronic jets are performed, based on detailed simulations of SiD and ILD, the two candidate detector concepts for the ILC. We estimate that a statistical precision of yt of 4% can be obtained with an integrated luminosity of 1 $\mathrm{ab}^{-1}$.

hep-ex

Inclusive Jets in PHP

Differential inclusive-jet cross sections have been measured in photoproduction for boson virtualities Q^2 < 1 GeV^2 with the ZEUS detector at HERA using an integrated luminosity of 300 pb^-1. Jets were identified in the laboratory frame using the k_T, anti-k_T or SIScone jet algorithms. Cross sections are presented as functions of the jet pseudorapidity, eta(jet), and the jet transverse energy, E_T(jet). Next-to-leading-order QCD calculations give a good description of the measurements, except for jets with low E_T(jet) and high eta(jet). The cross sections have the potential to improve the determination of the PDFs in future QCD fits. Values of alpha_s(M_Z) have been extracted from the measurements based on different jet algorithms. In addition, the energy-scale dependence of the strong coupling was determined.

hep-ex

Physics at the CLIC e+e- Linear Collider -- Input to the Snowmass process 2013

This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accompanied by a paper describing the CLIC accelerator study, submitted to the Frontier Capabilities group of the Snowmass process.

hep-ex

Measurement of the top Yukawa Coupling at a 1 TeV International Linear Collider using the SiD detector

One of the detector benchmark processes investigated for the SiD Detailed Baseline Design (DBD) is given by: e+e- -> ttH, where H is the Standard Model Higgs boson of mass 125 GeV. The study is carried out at a centre-of-mass energy of 1 TeV and assuming an integrated luminosity of 1 ab-1. The physics aim is a direct measurement of the top Yukawa coupling at the ILC. Higgs boson decays to beauty quark-antiquark pairs are reconstructed. The investigated final states contain eight jets or six jets, one charged lepton and missing energy. Additionally, four of the jets in signal events are caused by beauty quark decays. The analysis is based on a full simulation of the SiD detector using GEANT4. Beam-related backgrounds from gammagamma -> hadrons interactions and incoherent e+e- pairs are considered. This study addresses various aspects of the detector performance: jet clustering in complex hadronic final states, flavour-tagging and the identification of high energy leptons.

hep-ex