arXiv subjects

Philipp Schindler

Publications and source records attributed to Philipp Schindler.

At least 37 records · Page 2Linked to original sources

arXiv2022

Demonstration of fault-tolerant universal quantum gate operations

Quantum computers can be protected from noise by encoding the logical quantum information redundantly into multiple qubits using error correcting codes. When manipulating the logical quantum states, it is imperative that errors caused by imperfect operations do not spread uncontrollably through the quantum register. This requires that all operations on the quantum register obey a fault-tolerant circuit design which, in general, increases the complexity of the implementation. Here, we demonstrate a fault-tolerant universal set of gates on two logical qubits in a trapped-ion quantum computer. In particular, we make use of the recently introduced paradigm of flag fault tolerance, where the absence or presence of dangerous errors is heralded by usage of few ancillary 'flag' qubits. We perform a logical two-qubit CNOT-gate between two instances of the seven qubit color code, and we also fault-tolerantly prepare a logical magic state. We then realize a fault-tolerant logical T-gate by injecting the magic state via teleportation from one logical qubit onto the other. We observe the hallmark feature of fault tolerance, a superior performance compared to a non-fault-tolerant implementation. In combination with recently demonstrated repeated quantum error correction cycles these results open the door to error-corrected universal quantum computation.

quant-ph↗

arXiv2022

Native qudit entanglement in a trapped ion quantum processor

Quantum information carriers, just like most physical systems, naturally occupy high-dimensional Hilbert spaces. Instead of restricting them to a two-level subspace, these high-dimensional (qudit) quantum systems are emerging as a powerful resource for the next generation of quantum processors. Yet harnessing the potential of these systems requires efficient ways of generating the desired interaction between them. Here, we experimentally demonstrate an implementation of a native two-qudit entangling gate in a trapped-ion qudit system up to dimension $5$. This is achieved by generalizing a recently proposed light-shift gate mechanism to generate genuine qudit entanglement in a single application of the gate. The gate seamlessly adapts to the local dimension of the system with a calibration overhead that is independent of the dimension.

quant-ph↗

arXiv2022

Experimental single-setting quantum state tomography

Quantum computers solve ever more complex tasks using steadily growing system sizes. Characterizing these quantum systems is vital, yet becoming increasingly challenging. The gold-standard is quantum state tomography (QST), capable of fully reconstructing a quantum state without prior knowledge. Measurement and classical computing costs, however, increase exponentially in the system size - a bottleneck given the scale of existing and near-term quantum devices. Here, we demonstrate a scalable and practical QST approach that uses a single measurement setting, namely symmetric informationally complete (SIC) positive operator-valued measures (POVM). We implement these nonorthogonal measurements on an ion trap device by utilizing more energy levels in each ion - without ancilla qubits. More precisely, we locally map the SIC POVM to orthogonal states embedded in a higher-dimensional system, which we read out using repeated in-sequence detections, providing full tomographic information in every shot. Combining this SIC tomography with the recently developed randomized measurement toolbox ("classical shadows") proves to be a powerful combination. SIC tomography alleviates the need for choosing measurement settings at random ("derandomization"), while classical shadows enable the estimation of arbitrary polynomial functions of the density matrix orders of magnitudes faster than standard methods. The latter enables in-depth entanglement studies, which we experimentally showcase on a 5-qubit absolutely maximally entangled (AME) state. Moreover, the fact that the full tomography information is available in every shot enables online QST in real time. We demonstrate this on an 8-qubit entangled state, as well as for fast state identification. All in all, these features single out SIC-based classical shadow estimation as a highly scalable and convenient tool for quantum state characterization.

quant-ph↗

arXiv2022

Probing phases of quantum matter with an ion-trap tensor-network quantum eigensolver

Tensor-Network (TN) states are efficient parametric representations of ground states of local quantum Hamiltonians extensively used in numerical simulations. Here we encode a TN ansatz state directly into a quantum simulator, which can potentially offer an exponential advantage over purely numerical simulation. In particular, we demonstrate the optimization of a quantum-encoded TN ansatz state using a variational quantum eigensolver on an ion-trap quantum computer by preparing the ground states of the extended Su-Schrieffer-Heeger model. The generated states are characterized by estimating the topological invariants, verifying their topological order. Our TN encoding as a trapped ion circuit employs only single-site addressing optical pulses - the native operations naturally available on the platform. We reduce nearest-neighbor crosstalk by selecting different magnetic sublevels with well-separated transition frequencies to encode even and odd qubits.

quant-ph↗

arXiv2022

Towards experimental classical verification of quantum computation

With today's quantum processors venturing into regimes beyond the capabilities of classical devices [1-3], we face the challenge to verify that these devices perform as intended, even when we cannot check their results on classical computers [4,5]. In a recent breakthrough in computer science [6-8], a protocol was developed that allows the verification of the output of a computation performed by an untrusted quantum device based only on classical resources. Here, we follow these ideas, and demonstrate in a first, proof-of-principle experiment a verification protocol using only classical means on a small trapped-ion quantum processor. We contrast this to verification protocols, which require trust and detailed hardware knowledge, as in gate-level benchmarking [9], or additional quantum resources in case we do not have access to or trust in the device to be tested [5]. While our experimental demonstration uses a simplified version [10] of Mahadev's protocol [6] we demonstrate the necessary steps for verifying fully untrusted devices. A scaled-up version of our protocol will allow for classical verification, requiring no hardware access or detailed knowledge of the tested device. Its security relies on post-quantum secure trapdoor functions within an interactive proof [11]. The conceptually straightforward, but technologically challenging scaled-up version of the interactive proofs, considered here, can be used for a variety of additional tasks such as verifying quantum advantage [8], generating [12] and certifying quantum randomness [7], or composable remote state preparation [13].

quant-ph↗

arXiv2022

Optimal metrology with programmable quantum sensors

Quantum sensors are an established technology that has created new opportunities for precision sensing across the breadth of science. Using entanglement for quantum-enhancement will allow us to construct the next generation of sensors that can approach the fundamental limits of precision allowed by quantum physics. However, determining how state-of-the-art sensing platforms may be used to converge to these ultimate limits is an outstanding challenge. In this work we merge concepts from the field of quantum information processing with metrology, and successfully implement experimentally a *programmable quantum sensor* operating close to the fundamental limits imposed by the laws of quantum mechanics. We achieve this by using low-depth, parametrized quantum circuits implementing optimal input states and measurement operators for a sensing task on a trapped ion experiment. With 26 ions, we approach the fundamental sensing limit up to a factor of 1.45(1), outperforming conventional spin-squeezing with a factor of 1.87(3). Our approach reduces the number of averages to reach a given Allan deviation by a factor of 1.59(6) compared to traditional methods not employing entanglement-enabled protocols. We further perform on-device quantum-classical feedback optimization to `self-calibrate' the programmable quantum sensor with comparable performance. This ability illustrates that this next generation of quantum sensor can be employed without prior knowledge of the device or its noise environment.

quant-ph↗

arXiv2021

Analytical and experimental study of center line miscalibrations in Mølmer-Sørensen gates

A major challenge for the realisation of useful universal quantum computers is achieving high fidelity two-qubit entangling gate operations. However, calibration errors can affect the quantum gate operations and limit their fidelity. To reduce such errors it is desirable to have an analytical understanding and quantitative predictions of the effects that miscalibrations of gate parameters have on the gate performance. In this work, we study a systematic perturbative expansion in miscalibrated parameters of the Molmer-Sorensen entangling gate, which is widely used in trapped ion quantum processors. Our analytical treatment particularly focuses on systematic center line detuning miscalibrations. Via a unitary Magnus expansion, we compute the gate evolution operator which allows us to obtain relevant key properties such as relative phases, electronic populations, quantum state purity and fidelities. These quantities, subsequently, are used to assess the performance of the gate using the fidelity of entangled states as performance metric. We verify the predictions from our model by benchmarking them against measurements in a trapped-ion quantum processor. The method and the results presented here can help design and calibrate high-fidelity gate operations of large-scale quantum computers.

quant-ph↗

arXiv2021

Relaxation times do not capture logical qubit dynamics

Quantum error correction procedures have the potential to enable faithful operation of large-scale quantum computers. They protect information from environmental decoherence by storing it in logical qubits, built from ensembles of entangled physical qubits according to suitably tailored quantum error correcting encodings. To date, no generally accepted framework to characterise the behaviour of logical qubits as quantum memories has been developed. In this work, we show that generalisations of well-established figures of merit of physical qubits, such as relaxation times, to logical qubits fail and do not capture dynamics of logical qubits. We experimentally illustrate that, in particular, spatial noise correlations can give rise to rich and counter-intuitive dynamical behavior of logical qubits. We show that a suitable set of observables, formed by code space population and logical operators within the code space, allows one to track and characterize the dynamical behaviour of logical qubits. Awareness of these effects and the efficient characterisation tools used in this work will help to guide and benchmark experimental implementations of logical qubits.

quant-ph↗

arXiv2021

Experimental Bayesian calibration of trapped ion entangling operations

The performance of quantum gate operations is experimentally determined by how correct operational parameters can be determined and set, and how stable these parameters can be maintained. In addition, gates acting on different sets of qubits require unique sets of control parameters. Thus, an efficient multi-dimensional parameter estimation procedure is crucial to calibrate even medium sized quantum processors. Here, we develop and characterize an efficient calibration protocol to automatically estimate and adjust experimental parameters of the widely used Molmer-Sorensen entangling gate operation in a trapped ion quantum information processor. The protocol exploits Bayesian parameter estimation methods which includes a stopping criterion based on a desired gate infidelity. We experimentally demonstrate a median gate infidelity of $1.3(1)\cdot10^{-3}$, requiring only $1200\pm500$ experimental cycles, while completing the entire gate calibration procedure in less than one minute. This approach is applicable to other quantum information processor architectures with known or sufficiently characterized theoretical models.

quant-ph↗

arXiv2021

Characterizing quantum instruments: from non-demolition measurements to quantum error correction

In quantum information processing quantum operations are often processed alongside measurements which result in classical data. Due to the information gain of classical measurement outputs non-unitary dynamical processes can take place on the system, for which common quantum channel descriptions fail to describe the time evolution. Quantum measurements are correctly treated by means of so-called quantum instruments capturing both classical outputs and post-measurement quantum states. Here we present a general recipe to characterize quantum instruments alongside its experimental implementation and analysis. Thereby, the full dynamics of a quantum instrument can be captured, exhibiting details of the quantum dynamics that would be overlooked with common tomography techniques. For illustration, we apply our characterization technique to a quantum instrument used for the detection of qubit loss and leakage, which was recently implemented as a building block in a quantum error correction (QEC) experiment (Nature 585, 207-210 (2020)). Our analysis reveals unexpected and in-depth information about the failure modes of the implementation of the quantum instrument. We then numerically study the implications of these experimental failure modes on QEC performance, when the instrument is employed as a building block in QEC protocols on a logical qubit. Our results highlight the importance of careful characterization and modelling of failure modes in quantum instruments, as compared to simplistic hardware-agnostic phenomenological noise models, which fail to predict the undesired behavior of faulty quantum instruments. The presented methods and results are directly applicable to generic quantum instruments.

quant-ph↗

arXiv2021

A universal qudit quantum processor with trapped ions

Today's quantum computers operate with a binary encoding that is the quantum analog of classical bits. Yet, the underlying quantum hardware consists of information carriers that are not necessarily binary, but typically exhibit a rich multilevel structure, which is artificially restricted to two dimensions. A wide range of applications from quantum chemistry to quantum simulation, on the other hand, would benefit from access to higher-dimensional Hilbert spaces, which conventional quantum computers can only emulate. Here we demonstrate a universal qudit quantum processor using trapped ions with a local Hilbert space dimension of up to 7. With a performance similar to qubit quantum processors, this approach enables native simulation of high-dimensional quantum systems, as well as more efficient implementation of qubit-based algorithms.

quant-ph↗

arXiv2021

Electric field noise in a high-temperature superconducting surface ion trap

Scaling up trapped-ion quantum computers requires new trap materials to be explored. Here, we present experiments with a surface ion trap made from the high-temperature superconductor YBCO, a promising material for future trap designs. We show that voltage noise from superconducting electrode leads is negligible within the sensitivity $S_V=9\times 10^{-20}\,\mathrm{V}^2\mathrm{Hz}^{-1}$ of our setup, and for lead dimensions typical for advanced trap designs. Furthermore, we investigate the frequency and temperature dependence of electric field noise above a YBCO surface. We find a $1/f$ spectral dependence of the noise and a non-trivial temperature dependence, with a plateau in the noise stretching over roughly $60\,\mathrm{K}$. The onset of the plateau coincides with the superconducting transition, indicating a connection between the dominant noise and the YBCO trap material. We exclude the YBCO bulk as origin of the noise and suggest further experiments to decide between the two remaining options explaining the observed temperature dependence: noise screening within the superconducting phase, or surface noise activated by the YBCO bulk through some unknown mechanism.

quant-ph↗

arXiv2021

A compact ion-trap quantum computing demonstrator

Quantum information processing is steadily progressing from a purely academic discipline towards applications throughout science and industry. Transitioning from lab-based, proof-of-concept experiments to robust, integrated realizations of quantum information processing hardware is an important step in this process. However, the nature of traditional laboratory setups does not offer itself readily to scaling up system sizes or allow for applications outside of laboratory-grade environments. This transition requires overcoming challenges in engineering and integration without sacrificing the state-of-the-art performance of laboratory implementations. Here, we present a 19-inch rack quantum computing demonstrator based on $^{40}\textrm{Ca}^+$ optical qubits in a linear Paul trap to address many of these challenges. We outline the mechanical, optical, and electrical subsystems. Further, we describe the automation and remote access components of the quantum computing stack. We conclude by describing characterization measurements relevant to digital quantum computing including entangling operations mediated by the Molmer-Sorenson interaction. Using this setup we produce maximally-entangled Greenberger-Horne-Zeilinger states with up to 24 ions without the use of post-selection or error mitigation techniques; on par with well-established conventional laboratory setups.

quant-ph↗

arXiv2021

RF-induced heating dynamics of non-crystallized trapped ions

We investigate the energy dynamics of non-crystallized (melted) ions, confined in a Paul trap. The non-periodic Coulomb interaction experienced by melted ions forms a medium for non-conservative energy transfer from the radio-frequency (rf) field to the ions, a process known as rf heating. We study rf heating by analyzing numerical simulations of non-crystallized ion motion in Paul trap potentials, in which the energy of the ions' secular motion changes at discrete intervals, corresponding to ion-ion collisions. The analysis of these collisions is used as a basis to derive a simplified model of rf heating energy dynamics, from which we conclude that the rf heating rate is predominantly dependent on the rf field strength. We confirm the predictability of the model experimentally: Two trapped $^{40}$Ca$^{+}$ ions are deterministically driven to melt, and their fluorescence rate is used to infer the ions' energy. From simulation and experimental results, we generalize which experimental parameters are required for efficient recrystallization of melted trapped ions.

physics.atom-ph↗

arXiv2021

Heating of a trapped ion induced by dielectric materials

Electric-field noise due to surfaces disturbs the motion of nearby trapped ions, compromising the fidelity of gate operations that are the basis for quantum computing algorithms. We present a method that predicts the effect of dielectric materials on the ion's motion. Such dielectrics are integral components of ion traps. Quantitative agreement is found between a model with no free parameters and measurements of a trapped ion in proximity to dielectric mirrors. We expect that this approach can be used to optimize the design of ion-trap-based quantum computers and network nodes.

quant-ph↗

arXiv2021

Scalable and Parallel Tweezer Gates for Quantum Computing with Long Ion Strings

Trapped-ion quantum computers have demonstrated high-performance gate operations in registers of about ten qubits. However, scaling up and parallelizing quantum computations with long one-dimensional (1D) ion strings is an outstanding challenge due to the global nature of the motional modes of the ions which mediate qubit-qubit couplings. Here, we devise methods to implement scalable and parallel entangling gates by using engineered localized phonon modes. We propose to tailor such localized modes by tuning the local potential of individual ions with programmable optical tweezers. Localized modes of small subsets of qubits form the basis to perform entangling gates on these subsets in parallel. We demonstrate the inherent scalability of this approach by presenting analytical and numerical results for long 1D ion chains and even for infinite chains of uniformly spaced ions. Furthermore, we show that combining our methods with optimal coherent control techniques allows to realize maximally dense universal parallelized quantum circuits.

quant-ph↗

arXiv2020

Entangling logical qubits with lattice surgery

Future quantum computers will require quantum error correction for faithful operation. The correction capabilities come with an overhead for performing fault-tolerant logical operations on the encoded qubits. One of the most resource efficient ways to implement logical operations is lattice surgery, where groups of physical qubits, arranged on lattices, can be merged and split to realize entangling gates and teleport logical information. Here, we report on the experimental realization of lattice surgery between two topologically encoded qubits in a 10-qubit ion trap quantum information processor. In particular, we demonstrate entanglement between two logical qubits and we implement logical state teleportation.

quant-ph↗

arXiv2020

Deterministic correction of qubit loss

The loss of qubits - the elementary carriers of quantum information - poses one of the fundamental obstacles towards large-scale and fault-tolerant quantum information processors. In this work, we experimentally demonstrate a complete toolbox and the implementation of a full cycle of qubit loss detection and correction on a minimal instance of a topological surface code. This includes a quantum non-demolition measurement of a qubit loss event that conditionally triggers a restoration procedure, mapping the logical qubit onto a new encoding on the remaining qubits. The demonstrated methods, implemented here in a trapped-ion quantum processor, are applicable to other quantum computing architectures and codes, including leading 2D and 3D topological quantum error correcting codes. These tools complement previously demonstrated techniques to correct computational errors, and in combination constitute essential building blocks for complete and scalable quantum error correction.

quant-ph↗