arXiv subjects

Philippe Berio

Publications and source records attributed to Philippe Berio.

At least 19 recordsLinked to original sources

arXiv2026

Interferometric Survey of Stellar Parameters: Towards homogeneous FGK stars parameters and surface-brightness color relation in the context of PLATO space mission

The estimation of stellar angular diameters can be performed from the surface brightness - color relation (SBCR) and photometry. The SBCR have been considered by the PLATO space mission as an independent empirical alternative for estimating stellar radii of FGK stars. In this context, we have implemented an homogeneous approach not only for calibrating the SBCR for FGK-IV/V stars but, also for determining their fundamental parameters in order to place the stars reliably on the HR diagram and to study their impact on the SBCR. We have performed interferometric observations of 18 quiescent FGK-IV/V stars in the Gaia color range of $3.088 \leq G \leq 5.498$. For the first time, we used 3 different interferometers operating in the $R$, $H$ , and $K$ bands to measure polychromatic limb-darkened angular diameters (LDAD). In parallel, by using public domain spectra we have estimated the stellar parameters ($T_{eff}$, $log g$ and Z) by using the open python tool iSpec. We achieved an average accuracy of 2.3% for the LDAD based on polychromatic observations. However, we have observed that our SBCR does not follow the calibration of the relation between surface brightness and color in Gaia found in the literature. Furthermore, we found that $log g$ and $Z$ have no impact on the SBC relation; given the characteristics of our sample of quiescent stars, it constitutes an ideal set of targets for conducting a new SBCR calibration within the framework of the PLATO space mission. In this context, we reported a SBCR calibration with $\sigma_{RMS} = $ 0.012, 0.009, 0.009 in the $G, G_{BP}$ and $G_{RP}$ Gaia bands, respectively. This article is part of a series of papers reporting the first results obtained using a polychromatic approach to measure LDAD, employing a fully homogeneous methodology for both determining the fundamental parameters of stars and measuring the LDAD, $\theta_{LD}$.

astro-ph.SR↗

arXiv2026

Destructuring the disk of AB Aurigae: Dynamics and accretion

In this paper, we present near-IR polarized images of the AB Aur disk at three epochs spanning 3.85 years with SPHERE/IRDIS, as well as Halpha images obtained with SPHERE/ZIMPOL at a single epoch. The purpose of this study is to analyze the dynamics of the entire disk and of the various structures in near-IR polarimetry, and to identify sources of Halpha emission to derive constraints on their mass accretion rate. The dynamical study in the near-IR shows that the disk globally follows Keplerian rotation, but we observe a departure from this behavior at radii smaller than ~60au. At the smallest radius of ~25au, we measure a deviation from Keplerian rotation as large as ~12deg over 3.85 years, demonstrating sub-Keplerian rotation. The two bright spirals within the millimeter cavity have different dynamic trends, and we discuss their possible link with the identified planet candidates. We also discuss the implications of the non-Keplerian behavior, and we posit that it could be related to interactions with multiple protoplanets orbiting out of the disk plane on elliptical orbits. Furthermore, the orbital analysis of the compact sources (labeled f1, f2, and f3) suggests that their orbital planes are significantly inclined with respect to the disk plane by several tens of degrees. The variability of the shadows suggests that they are produced by optically thick regions located within ~60au. For the photometric analysis in Halpha, we derive a flux of about 8.22x10^{-15} erg/s/cm^2 for the entire feature f1, but only 6.46x10^{-16} erg/s/cm^2 at the location of AB Aur b, consistent with non-detection. If f1 were a point source and the accretion remained constant for 1Myr, it would correspond to ~5-20 Jupiter masses according to the magnetospheric accretion model or ~6-10 Jupiter masses according to the boundary layer accretion model.

astro-ph.EP↗

arXiv2025

GRAVITY+ adaptive optics (GPAO) tests in Europe

We present in this proceeding the results of the test phase of the GRAVITY+ adaptive optics. This extreme AO will enable both high-dynamic range observations of faint companions (including exoplanets) thanks to a 40x40 sub-apertures wavefront control, and sensitive observations (including AGNs) thanks to the addition of a laser guide star to each UT of the VLT. This leap forward is made thanks to a mostly automated setup of the AO, including calibration of the NCPAs, that we tested in Europe on the UT+atmosphere simulator we built in Nice. We managed to reproduce in laboratory the expected performances of all the modes of the AO, including under non-optimal atmospheric or telescope alignment conditions, giving us the green light to proceed with the Assembly, Integration and Verification phase in Paranal.

astro-ph.IM↗

arXiv2024

Open loop calibration and closed loop non-perturbative estimation of the lateral errors of an adaptive optics system: examples with GRAVITY+ and CHARA experimental data

Performances of an adaptive optics (AO) system are directly linked with the quality of its alignment. During the instrument calibration, having open loop fast tools with a large capture range are necessary to quickly assess the system misalignment and to drive it towards a state allowing to close the AO loop. During operation, complex systems are prone to misalignments (mechanical flexions, rotation of optical elements, etc.) that potentially degrade the AO performances, creating a need for a monitoring tool to tackle their driftage. In this work, we first present an improved perturbative method to quickly assess large lateral errors in open loop. It uses the spatial correlation of the measured interaction matrix of a limited number of 2D spatial modes with a synthetic model. Then, we introduce a novel solution to finely measure and correct these lateral errors via the closed loop telemetry. Non-perturbative, this method consequently does not impact the science output of the instrument. It is based on the temporal correlation of 2D spatial frequencies in the deformable mirror commands. It is model-free (no need of an interaction matrix model) and sparse in the Fourier space, making it fast and easily scalable to complex systems such as future extremely large telescopes. Finally, we present some results obtained on the development bench of the GRAVITY+ extreme AO system (Cartesian grid, 1432 actuators). In addition, we show with on-sky results gathered with CHARA and GRAVITY/CIAO that the method is adaptable to non-conventional AO geometries (hexagonal grids, 60 actuators).

eess.SP↗

arXiv2024

Asgard/NOTT: water vapor and CO$_2$ atmospheric dispersion compensation system

To leverage the angular resolution of interferometry at high contrast, one must employ specialized beam-combiners called interferometric nullers. Nullers discard part of the astrophysical information to optimize the recording of light present in the dark fringe of the central source. Asgard/NOTT will deploy a beam-combination scheme offering good instrumental noise rejection when phased appropriately, but for which information is degenerate on the outputs, prompting a dedicated tuning strategy using the science detector. The dispersive effect of water vapor can be corrected with prisms forming a variable thickness of glass. But observations in the L band suffer from an additional and important chromatic effect due to longitudinal atmospheric dispersion coming from a resonance of CO2 at 4.3 micron. To compensate for this effect efficiently, a novel type of compensation device will be deployed leveraging a gas cell of variable length at ambient pressure. After reviewing the impact of water vapor and CO2, we present the design of this atmospheric dispersion compensation device and describe a strategy to maintain this tuning on-sky.

astro-ph.IM↗

arXiv2023

Chromatically modelling the parsec scale dusty structure in the centre of NGC1068

The Very Large Telescope Interferometer (VLTI) has been providing breakthrough images of the dust in the central parsecs of Active Galactic Nuclei (AGN), a key component of the AGN unification scheme and AGN host galaxy interaction. In single IR bands, the images can have multiple interpretations some of which could challenge the unification scheme. This is the case for the archetypal type 2 AGN of NGC1068. The ambiguity is reduced by multi-band temperature maps which are hindered by uncertainty in intra-band alignment. We create a chromatic model capable of simultaneously explaining the VLTI GRAVITY+MATISSE 2$\mu$m-13$\mu$m observations of the AGN in NGC1068. We use a simple disk and wind geometry populated with spherical black body emitters and dust obscuration to create a versatile multi-wavelength model for IR interferometric data of dusty objects. This simple geometry is capable of reproducing the K-N-band VLTI data, explains the complex single band images, and solves the alignment between bands. We find that the resulting geometry is consistent with previous studies. Compared to molecular gas emission, our model wind position angle (PA) of $22^3_2{\deg}$ is close to the mas scale outflowing CO(6-5) PA of ~33{\deg} seen with the ALMA. The equivalent 90{\deg} offset model disk PA is also consistent with the CO(6-5) disk axis of 112{\deg} as well as the mas scale disk axis from CO(2-1), CO(3-2), and HCO$^+$(4-3) of 115$\pm$5{\deg}. Furthermore, the resulting model visually resembles the equivalent achromatic image reconstructions. We conclude that the IR emitting structure surrounding the AGN can indeed be explained by the clumpy disk+wind iteration of the AGN unification scheme. Within the scheme, we find it is best explained as a type 2 and the obscuring dust chemistry is consistent with a mix of olivine silicates and 16$\pm$1% amorphous carbon.

astro-ph.GA↗

arXiv2023

The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI

The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.

astro-ph.IM↗

arXiv2022

Impact of water vapor seeing on mid-infrared high-contrast imaging at ELT scale

The high-speed variability of the local water vapor content in the Earth atmosphere is a significant contributor to ground-based wavefront quality throughout the infrared domain. Unlike dry air, water vapor is highly chromatic, especially in the mid-infrared. This means that adaptive optics correction in the visible or near-infrared domain does not necessarily ensure a high wavefront quality at longer wavelengths. Here, we use literature measurements of water vapor seeing, and more recent infrared interferometric data from the Very Large Telescope Interferometer (VLTI), to evaluate the wavefront quality that will be delivered to the METIS mid-infrared camera and spectrograph for the Extremely Large Telescope (ELT), operating from 3 to 13 μm, after single-conjugate adaptive optics correction in the near-infrared. We discuss how the additional wavefront error due to water vapor seeing is expected to dominate the wavefront quality budget at N band (8-13 μm), and therefore to drive the performance of mid-infrared high-contrast imaging modes at ELT scale. Then we present how the METIS team is planning to mitigate the effect of water vapor seeing using focal-plane wavefront sensing techniques, and show with end-to-end simulations by how much the high-contrast imaging performance can be improved.

astro-ph.IM↗

arXiv2022

CHARA/SPICA: a 6-telescope visible instrument for the CHARA Array

With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diagram. This survey will also study the effects of the different kinds of variability and surface structure on the reliability of the extracted fundamental parameters. New surface-brightness-colour relations will be extracted from this survey, for general purposes on distance determination and the characterization of faint stars. SPICA is made of a visible 6T fibered instrument and of a near-infrared fringe sensor. In this paper, we detail the science program and the main characteristics of SPICA-VIS. We present finally the initial performance obtained during the commissioning.

astro-ph.IM↗

arXiv2022

SPICA-FT: The new fringe tracker of the CHARA array

SPICA-FT is part of the CHARA/SPICA instrument which combines a visible 6T fibered instrument (SPICAVIS) with a H-band 6T fringe sensor. SPICA-FT is a pairwise ABCD integrated optics combiner. The chip is installed in the MIRC-X instrument. The MIRC-X spectrograph could be fed either by the classical 6T fibered combiner or by the SPICA-FT integrated optics combiner. SPICA-FT also integrates a dedicated fringe tracking software, called the opd-controller communicating with the main delay line through a dedicated channel. We present the design of the integrated optics chip, its implementation in MIRC-X and the software architecture of the group-delay and phase-delay control loops. The final integrated optics chip and the software have been fully characterized in the laboratory. First on-sky tests of the integrated optics combiner began in 2020. We continue the on-sky tests of the whole system (combiner + software) in Spring and Summer 2022. We present the main results, and we deduce the preliminary performance of SPICA-FT.

astro-ph.IM↗

arXiv2022

Building a GRAVITY+ Adaptive Optics Test Bench

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

astro-ph.IM↗

arXiv2022

The dusty heart of Circinus: I. Imaging the circumnuclear dust in N-band

Active galactic nuclei play a key role in the evolution of galaxies, but their inner workings and physical connection to the host are poorly understood due to a lack of angular resolution. Infrared interferometry makes it possible to resolve the circumnuclear dust in the nearby Seyfert 2 galaxy, Circinus. Previous observations have revealed complex structures and polar dust emission but interpretation was limited to simple models. MATISSE makes it possible to image these structures for the first time. We observed the Circinus Galaxy with VLTI/MATISSE, producing 150 correlated flux spectra and 100 closure phase spectra. We reconstructed images in the N-band at ~10 mas resolution. We fit blackbody functions with dust extinction to several aperture-extracted fluxes from the images to produce a temperature distribution of central dusty structures. We find significant substructure in the circumnuclear dust: central unresolved flux of ~0.5 Jy, a thin disk 1.9 pc in diameter oriented along ~45 deg,and a ~4x1.5 pc polar emission extending orthogonal to the disk. The polar emission exhibits patchiness, which we attribute to clumpy dust. Flux enhancements to the east and west of the disk are seen for the first time. We distinguish the temperature profiles of the disk and of the polar emission: the disk shows a steep temperature gradient indicative of denser material; the polar profile is flatter, indicating clumpiness and/or lower dust density. The unresolved flux is fitted with a high temperature, ~370 K. The polar dust remains warm (~200 K) out to 1.5 pc from the disk. The recovered morphology and temperature distribution resembles modeling of accretion disks with radiation-driven winds at large scales, but we placed new constraints on the subparsec dust. The subparsec features imaged here place new constraints on the physical modeling of circumnuclear dust in active galaxies.

astro-ph.GA↗

arXiv2021

Thermal imaging of dust hiding the black hole in the Active Galaxy NGC 1068

In the widely accepted 'Unified Model' solution of the classification puzzle of Active Galactic Nuclei, the orientation of a dusty accretion torus around the central black hole dominates their appearance. In 'type-1' systems, the bright nucleus is visible at the centre of a face-on torus. In 'type-2' systems the thick, nearly edge-on torus hides the central engine. Later studies suggested evolutionary effects and added dusty clumps and polar winds but left the basic picture intact. However, recent high-resolution images of the archetypal type-2 galaxy NGC 1068 suggested a more radical revision. They displayed a ring-like emission feature which the authors advocated to be hot dust surrounding the black hole at the radius where the radiation from the central engine evaporates the dust. That ring is too thin and too far tilted from edge-on to hide the central engine, and ad hoc foreground extinction is needed to explain the type-2 classification. These images quickly generated reinterpretations of the type 1-2 dichotomy. Here we present new multi-band mid-infrared images of NGC1068 that detail the dust temperature distribution and reaffirm the original model. Combined with radio data, our maps locate the central engine below the previously reported ring and obscured by a thick, nearly edge-on disk, as predicted by the Unified Model. We also identify emission from polar flows and absorbing dust that is mineralogically distinct from that towards the Milky Way centre.

astro-ph.GA↗

arXiv2020

CHARA Array adaptive optics: complex operational software and performance

The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adaptive optics are developed to correct atmospheric turbulence and non-common path aberrations between each telescope and the beam combiner lab. This paper describes the AO software and its integration into the CHARA system. We also report initial on-sky tests that demonstrate an increase of scientific throughput by sensitivity gain and by extending useful observing time in worse seeing conditions. Our 6 telescopes and 12 AO systems with tens of critical alignments and control loops pose challenges in operation. We describe our methods enabling a single scientist to operate the entire system.

astro-ph.IM↗

arXiv2020

HIRES, the high-resolution spectrograph for the ELT

HIRES will be the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 mic (goal 0.35-1.8 mic) at a spectral resolution of ~100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU in the NIR. Therefore, it will be able to operate both in seeing and diffraction-limited modes. ELT-HIRES has a wide range of science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Some of the top science cases will be the detection of bio signatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars (PopIII), tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The HIRES consortium is composed of more than 30 institutes from 14 countries, forming a team of more than 200 scientists and engineers.

astro-ph.IM↗

arXiv2018

Perspectives of a visible instrument on the VLTI

In this paper we present the most promising science cases for a new generation visible instrument on the VLTI and the conceptual idea for the instrumental configuration. We also present a statistical study of the potential targets that may be accessible for the different classes of objects and for the required spectral resolutions.

astro-ph.IM↗

arXiv2017

On the inner disk structure of MWC480: evidence for asymmetries?

Studying the physical conditions structuring the young circumstellar disks is required for understanding the onset of planet formation. Of particular interest is the protoplanetary disk surrounding the Herbig star MWC480. The structure and properties of the circumstellar disk of MWC480 are studied by infrared interferometry and interpreted from a modeling approach. New observations are driving this study, in particular some recent Very Large Telescope Interferometer (VLTI)/MIDI data acquired in December 2013. Our one-component disk model could not reproduce simultaneously all our data: the Spectral Energy Distribution, the near-infrared Keck Interferometer data and the mid-infrared data obtained with the MIDI instrument. In order to explain all measurements, one possibility is to add an asymmetry in our one-component disk model with the assumption that the structure of the disk of MWC480 has not varied with time. Several scenarios are tested, and the one considering the presence of an azimuthal bright feature in the inner component of the disk model provides a better fit of the data. (In this study, we assumed that the size of the outer disk of MWC480 to be 20 au since most of the near and mid-IR emissions come from below 20 au. In our previous study (Jamialahmadi et al. 2015), we adopted an outer radius of 80 au, which is consistent with the value found by previous studies based on mm observations).

astro-ph.EP↗

arXiv2017

Study of the inner disk of the Herbig star MWC480

The inner structure and properties (temperature, mass) of the circumstellar disk of Herbig star MWC480 are studied by stellar interferometry method used in the infrared and are interpreted using semi-analytical models. From these models, the SED (Spectral Energy Distribution) was fitted and multi- wavelength intensity map of the source were calculated. The intensity map provides the input for modeling the Keck Interferometer (KI) data in the near-infrared (near-IR) and the data of the Very Large Telescope Interferometer (VLTI) with the mid-infrared instrument MIDI. We conclude that with our limited set of data, we can fit the SED, the Keck visibilities and the MIDI visibilities using a two-components disk model. Furthermore, we suspect that MWC480 has a transitional dusty disk. However, we need more MIDI observations with different baseline orientations to confirm our modeling.

astro-ph.EP↗