arXiv subjects

Philippe Ghosez

Publications and source records attributed to Philippe Ghosez.

At least 73 records · Page 4Linked to original sources

arXiv2016

First-principles re-investigation of bulk WO3

Using first-principles calculations, we analyze the structural properties of tungsten trioxide WO3 . Our calculations rely on density functional theory and the use of the B1-WC hybrid functional, which provides very good agreement with experimental data. The hypothetical high-symmetry cubic reference structure combines several ferroelectric and antiferrodistortive (antipolar cation motions, rotations and tilts of oxygen octahedra) structural instabilities. The instability related to antipolar W motions combines with those associated to oxygen rotations and tilts to produce the biggest energy reduction, yielding a P21/c ground state. This non-polar P21/c phase is only different from the experimentally reported Pc ground state by the absence of a very tiny additional ferroelectric distortion. The calculations performed on a stoichiometric compound so suggest that the low temperature phase of WO3 is not intrinsically ferroelectric and that the reported ferroelectric character might arise from extrinsic defects such as oxygen vacancies. Independently, we also identify never observed R3m and R3c ferroelectric phases with large polarizations and low energies close to the P 21/c ground state, which makes WO3 a potential antiferroelectric material. The relative stability of various phases is discussed in terms of the couplings between different structural distortions, highlighting a very complex interplay involving improper-like couplings up to fourth order in the energy expansion in the cubic phase.

cond-mat.mtrl-sci↗

arXiv2016

Can we prevent the "dead layer" formation at manganite interfaces?

The present work theoretically studies the possibility to hinder the formation of a "dead" layer at the interfaces in manganite superlattices. We showed that this goal can be reached by using alkaline-earth simple oxides as alternating layers in very thin superlattices. Indeed, such alternating layer promotes the contraction of manganite layers at the interfaces and $d_{x^2-y^2}$ preferred $e_g$ orbital occupancy, while Boltzman's transport calculations show an increase in conductivity. This result hold for different manganites, different alkaline-earth simple oxides as well as different thicknesses of the two layers.

cond-mat.mtrl-sci↗

arXiv2016

First-principles Modelling of SrTiO3 based Oxides for Thermoelectric Applications

Using first-principles electronic structure calculations, we studied the electronic and thermoelectric properties of SrTiO3 based oxide materials and their nanostructures identifying those nanostructures which possess highly anisotropic electronic bands. We showed recently that highly anisotropic flat-and-dispersive bands can maximize the thermoelectric power factor, and at the same time they can produce low dimensional electronic transport in bulk semiconductors. Although most of the considered nanostructures show such highly anisotropic bands, their predicted thermoelectric performance is not improved over that of SrTiO3. Besides highly anisotropic character, we emphasize the importance of the large weights of electronic states participating in transport and the small effective mass of charge carriers along the transport direction. These requirements may be better achieved in binary transition metal oxides than in ABO3 perovskite oxide materials.

cond-mat.mtrl-sci↗

arXiv2015

Model of two-dimensional electron gas formation at ferroelectric interfaces

The formation of a two-dimensional electron gas at oxide interfaces as a consequence of polar discontinuities has generated an enormous amount of activity due to the variety of interesting effects it gives rise to. Here we study under what circumstances similar processes can also take place underneath ferroelectric thin films. We use a simple Landau model to demonstrate that in the absence of extrinsic screening mechanisms a monodomain phase can be stabilized in ferroelectric films by means of an electronic reconstruction. Unlike in the LaAlO$_3$/SrTiO$_3$ heterostructure, the emergence with thickness of the free charge at the interface is discontinuous. This prediction is confirmed by performing first principles simulations of free standing slabs of PbTiO$_3$. The model is also used to predict the response of the system to an applied electric field, demonstrating that the two-dimensional electron gas can be switched on and off discontinuously and in a non-volatile fashion. Furthermore, the reversal of the polarization can be used to switch between a two-dimensional electron gas and a two-dimensional hole gas, which should, in principle, have very different transport properties. We discuss the possible formation of polarization domains and how such configuration competes with the spontaneous accumulation of free charge at the interfaces.

cond-mat.mes-hall↗

arXiv2015

Electric field control of Jahn-Teller distortions in bulk perovskites

The Jahn-Teller distortion, by its very nature, is often at the heart of the various electronic properties displayed by perovskites and related materials. Despite the Jahn-Teller mode being non- polar in nature, we devise and demonstrate in the present letter an electric field control of Jahn-Teller distortions in bulk perovskites. The electric field control is enabled through an anharmonic lattice mode coupling between the Jahn-Teller distortion and a polar mode. We confirm this coupling, and explicitly an electric field effect, through first principles calculations. The coupling will always exist within the P b2 1 m space group, which is found to be the favoured ground state for various perovskites under sufficient tensile epitaxial strain. Intriguingly, the calculations reveal that this mechanism is not only restricted to Jahn-Teller active systems, promising a general route to tune or induce novel electronic functionality in perovskites as a whole.

cond-mat.mtrl-sci↗

arXiv2015

Low-Dimensional Transport and Large Thermoelectric Power Factors in Bulk Semiconductors by Band Engineering of Highly Directional Electronic States

Thermoelectrics are promising to address energy issues but their exploitation is still hampered by low efficiencies. So far, much improvement has been achieved by reducing the thermal conductivity but less by maximizing the power factor. The latter imposes apparently conflicting requirements on the band structure: a narrow energy distribution and a low effective mass. Quantum confinement in nanostructures or the introduction of resonant states were suggested as possible solutions to this paradox but with limited success. Here, we propose an original approach to fulfill both requirements in bulk semiconductors. It exploits the highly-directional character of some orbitals to engineer the band-structure and produce a type of low-dimensional transport similar to that targeted in nanostructures, while retaining isotropic properties. Using first-principles calculations, the theoretical concept is demonstrated in Fe$_2$YZ Heusler compounds, yielding power factors 4-5 times larger than in classical thermoelectrics at room temperature. Our findings are totally generic and rationalize the search of alternative compounds with a similar behavior. Beyond thermoelectricity, these might be relevant also in the context of electronic, superconducting or photovoltaic applications.

cond-mat.mtrl-sci↗

arXiv2015

First-principles study of the lattice dynamical properties of strontium ruthenate

By means of first-principles calculations, various properties of SrRuO3 are investigated, focusing on its lattice dynamical properties. Despite having a Goldschmidt tolerance factor very close to 1, the phonon dispersion curves of the high-temperature cubic phase of SrRuO3 show strong antiferrodistortive instabilities. The energetics of metastable phases with different tilt patterns are discussed, concluding that the coupling of oxygen-rotation modes with anti-polar Sr motion plays a key role in stabilizing the Pnma phase with respect to alternative rotation patterns. This not only explains the ground state of SrRuO3 but also contributes to rationalize why most ABO3 perovskites exhibit an orthorhombic ground state. The zone-center phonon modes of the Pnma phase have been computed, from which we propose partial reassignment of available experimental data. The full dispersion curves have also been obtained, constituting benchmark results for the interpretation of future measurements and providing access to thermodynamical properties.

cond-mat.mtrl-sci↗

arXiv2014

Novel magneto-electric multiferroics from first-principles

Interest in first-principles calculations within the multiferroic community has been rapidly on the rise over the last decade. Initially considered as a powerful support to explain experimentally observed behaviours, the trend has evolved and, nowadays, density functional theory calculations has become also an essential predicting tool for identifying original rules to achieve multiferroism and design new magneto-electric compounds. This chapter aims to highlight the key advances in the field of multiferroics for which first-principles methods have contributed significantly. The essential theoretical developments that made this search possible are also briefly presented.

cond-mat.mtrl-sci↗

arXiv2014

Coupling and Electrical Control of Structural, Orbital and Magnetic Orders in Perovskites

Perovskite oxides are already widely used in industry and have huge potential for novel device applications thanks to the rich physical behaviour displayed in these materials. The key to the functional electronic properties exhibited by perovskites is often the so-called Jahn-Teller distortion. For applications, an electrical control of the Jahn-Teller distortions, which is so far out of reach, would therefore be highly desirable. Based on universal symmetry arguments, we determine new lattice mode couplings that can provide exactly this paradigm, and exemplify the effect from first-principles calculations. The proposed mechanism is completely general, however for illustrative purposes, we demonstrate the concept on vanadium based perovskites where we reveal an unprecedented orbital ordering and Jahn-Teller induced ferroelectricity. Thanks to the intimate coupling between Jahn-Teller distortions and electronic degrees of freedom, the electric field control of Jahn-Teller distortions is of general relevance and may find broad interest in various functional devices.

cond-mat.mtrl-sci↗

arXiv2014

First-principles study of PbTiO$_3$ under uniaxial strains and stresses

The behavior of PbTiO$_3$ under uniaxial strains and stresses is investigated from first-principles calculations within density functional theory. We show that irrespectively of the uniaxial mechanical constraint applied, the system keeps a purely ferroelectric ground-state, with the polarization aligned either along the constraint direction ($FE_z$ phase) or along one of the pseudo-cubic axis perpendicular to it ($FE_x$ phase). This contrasts with the cases of isotropic or biaxial mechanical constraints for which novel phases combining ferroelectic and antiferrodistortive motions have been previously reported. Under uniaxial strain, PbTiO$_3$ switched from a $FE_x$ ground state under compressive strain to $FE_z$ ground-state under tensile strain, beyond a critical strain $η_{zz}^c \approx +1$\%. Under uniaxial stress, PbTiO$_3$ exhibits either a $FE_x$ ground state under compression ($σ_{zz} < 0$) or a $FE_z$ ground state under tension ($σ_{zz} > 0$). Here, however, an abrupt jump of the structural parameters is also predicted under both compressive and tensile stresses at critical values $σ_{zz} \approx$ $+2$ GPa and $- 8$ GPa. This behavior appears similar to that predicted under negative isotropic pressure and might reveal practically useful to enhance the piezoelectric response in nanodevices.

cond-mat.mtrl-sci↗

arXiv2014

Atomically precise interfaces from non-stoichiometric deposition

Complex oxide heterostructures display some of the most chemically abrupt, atomically precise interfaces, which is advantageous when constructing new interface phases with emergent properties by juxtaposing incompatible ground states. One might assume that atomically precise interfaces result from stoichiometric growth, but here we show that the most precise control is obtained for non-stoichiometric growth where differing surface energies can be compensated by surfactant-like effects. For the precise growth of Sr$_{n+1}$Ti$_n$O$_{3n+1}$ Ruddlesden-Popper (RP) phases, stoichiometric deposition leads to the loss of the first RP rock-salt double layer, but growing with a strontium-rich surface layer restores the bulk stoichiometry and ordering of the subsurface RP structure. Our results dramatically expand the materials that can be prepared in epitaxial heterostructures with precise interface control---from just the $n=\infty$ end members (perovskites) to the entire RP family---enabling the exploration of novel quantum phenomena at a richer variety of oxide interfaces.

cond-mat.mtrl-sci↗

arXiv2014

Origin of two-dimensional electron gases at oxide interfaces: insights from theory

The response of oxide thin films to polar discontinuities at interfaces and surfaces has generated an enormous activity due to the variety of interesting effects it gives rise to. A case in point is the discovery of the electron gas at the interface between LaAlO3 and SrTiO3, which has since been shown to be quasi-two-dimensional, switchable, magnetic and/or superconducting. Despite these findings, the origin of the two-dimensional electron gas is highly debated and several possible mechanisms remain. Here we review the main proposed mechanisms and attempt to model expected effects in a quantitative way with the ambition of better constraining what effects can/cannot explain the observed phenomenology. We do it in the framework of a phenomenological model for understanding electronic and/or redox screening of the chemical charge in oxide heterostructures. We also discuss the effect of intermixing, both conserving and non-conserving the total stoichiometry.

cond-mat.mes-hall↗

arXiv2014

First principles characterization of the P2_1ab ferroelectric phase of Bi2WO6

The structural, dielectric, dynamical, elastic, piezoelectric and nonlinear optical (second-order susceptibility and Pockels tensors) properties of Bi2$WO6 in its P2_1ab ferroelectric ground state are determined using density functional theory. The calculation of infrared and Raman spectra on single crystal allowed us to clarify the assignment of experimental phonon modes, considering the good agreement between the calculated and the experimental Raman spectra obtained on polycrystal. The calculation of the elastic constants confirms the elastic stability of the crystal and allow us to estimate the Young and shear moduli of polycrystalline samples. The piezoelectric constants have significant intrinsic values comparable to those of prototypical ABO3 ferroelectrics. The electro-optic response is strongly dominated by the ionic contribution of transverse optic modes, yielding sizable Pockels coefficients around 9 pm/V along the polar direction.

cond-mat.mtrl-sci↗

arXiv2013

Doping-dependent band structure of LaAlO$_{3}$/SrTiO$_{3}$ interfaces by soft x-ray polarization-controlled resonant angle-resolved photoemission

Polarization-controlled synchrotron radiation was used to map the electronic structure of buried conducting interfaces of LaAlO$_3$/SrTiO$_3$ in a resonant angle-resolved photoemission experiment. A strong dependence on the light polarization of the Fermi surface and band dispersions is demonstrated, highlighting the distinct Ti 3d orbitals involved in 2D conduction. Samples with different 2D doping levels were prepared and measured by photoemission, revealing different band occupancies and Fermi surface shapes. A direct comparison between the photoemission measurements and advanced first-principle calculations carried out for different 3d-band fillings is presented in conjunction with the 2D carrier concentration obtained from transport measurements.

cond-mat.str-el↗

arXiv2013

Electric control of the magnetization in BiFeO$_3$/LaFeO$_3$ superlattices

First-principles techniques are used to investigate the behavior of BiFeO$_{3}$/LaFeO$_{3}$ perovskite oxide superlattices epitaxially grown on a (001)-SrTiO$_3$ substrate. The calculations show that 1/1 superlattices exhibit a $Pmc2_1$ ground state combining a trilinear coupling of one polar and two oxygen rotational lattice modes, and weak ferromagnetism. The microscopic mechanism allowing one to manipulate the magnetization with an electric field in such systems is presented and its dependence on strain and chemical substitution is discussed. BiFeO$_{3}$/LaFeO$_{3}$ artificial superlattices appear to be good candidates to achieve electric switching of magnetization at room temperature.

cond-mat.mtrl-sci↗

arXiv2013

Improper ferroelectricity and multiferroism in 2HBaMnO$_3$

Using first-principles calculations, we study theoretically the stable 2H hexagonal structure of BaMnO3. We show that from the stable high temperature P63/mmc structure, the compound should exhibit an improper ferroelectric structural phase transition to a P63cm ground state. Combined with its antiferromagnetic properties, 2H-BaMnO3 is therefore expected to be multiferroic at low temperature. The phase transition mechanism in BaMnO3 appears similar to what was reported in YMnO3 in spite of totally different atomic arrangement, cation sizes and Mn valence state.

cond-mat.mtrl-sci↗

arXiv2013

First-principles model potentials for lattice-dynamical studies: general methodology and example of application to ferroic perovskite oxides

We present a scheme to construct model potentials, with parameters computed from first principles, for large-scale lattice-dynamical simulations of materials. Our method mimics the traditional solid-state approach to the investigation of vibrational spectra, i.e., we start from a suitably chosen reference configuration of the material and describe its energy as a function of arbitrary atomic distortions by means of a Taylor series. Such a form of the potential-energy surface is completely general, trivial to formulate for any compound, and physically transparent. Further, the approximations involved in our effective models are clear-cut, and the precision can be improved in a systematic and well-defined fashion. Moreover, such a simple definition allows for a straightforward determination of the parameters in the low-order terms of the series, as they are the direct result of density-functional-perturbation-theory calculations, which greatly simplifies the model construction. Here we present such a scheme, discuss a practical and versatile methodology for the calculation of the model parameters from first principles, and describe our results for two challenging cases in which the model potential is strongly anharmonic, namely, ferroic perovskite oxides PbTiO3 and SrTiO3. The choice of test materials was partly motivated by historical reasons, since our scheme can be viewed as a natural extension of (and was initially inspired by) the so-called first-principles effective Hamiltonian approach to the investigation of temperature-driven effects in ferroelectric perovskite oxides. Thus, the study of these compounds allows us to better describe the connections between the effective-Hamiltonian method and ours.

cond-mat.mtrl-sci↗

arXiv2012

Ferroelectricity in ultrathin film capacitors

Going down to the limit of ultrathin films holds promise for a new generation of devices such as ferroelectric tunnel junctions or resistive memories. However, these length scales also make the devices sensitive to parasitic effects related to miniaturization, and a better understanding of what happens as size is reduced is of practical importance for the future development of these devices. As the experimental advances in materials preparation and characterization have come together with great progress in theoretical modeling of ferroelectrics, both theorists and experimentalists can finally probe the same length and time scales. This allows realtime feedback between theory and experiment, with new discoveries now routinely made both in the laboratory and on the computer. Throughout this chapter, we will highlight the recent advances in density functional theory based modeling and the role it played in our understanding of ultrathin ferroelectrics. We will begin with a brief introduction to ferroelectricity and ferroelectric oxides, followed by an overview of the major theoretical developments. We will then discuss some of the subtleties of ferroelectricity in perovskite oxides, before turning our attention to the main subject of the chapter -- ferroelectricity in ultrathin films. We will discuss in detail the influence of the mechanical, electrical and chemical boundary conditions on the stability of the polar state in a parallel plate capacitor geometry, introducing the notion of depolarization fields that tend to destabilize ferroelectricity. We will look at other ways in which a thin ferroelectric can preserve its polar state, focusing on ferroelectric domains and domain walls. Finally, we will briefly discuss artificially layered ferroelectrics and the potential they hold as tailor-made materials for electronic applications.

cond-mat.mtrl-sci↗